After changing the IP address of the server licenses and Virtual Center... «not enough licenses...» »

Similar Questions

• Windows 7 says this isn't authentic after changing the HARD drive and can not activate

  After a Windows Update I received a notice that my version of windows was not authentic, which is false because I had windows on my laptop because I got it 4 years ago. Recently, I had to have the changed HARD drive as it corrupts. Installed new HARD drive and partition it a space in which the old files to hard drives. Seemed to turn very well when HARD drives were exchanged and windows installed on the new drive until windows update. My Microsoft certificate key is passed out to illegible but I don't have the product key for the OEM version. Any help would be great, thanks.

  If Windows was preinstalled on your computer, you can enable using the code from the sticker on the computer.  If you can not read the sticker more, you will need to contact the computer company he built.

  If you purchased Windows from the store, you can enable using the code of the case/box/CD.  If you can't read it, you must contact the retailer who sells to you.

• Unable to connect to APEX after changing the IP address of the server

  Hello
  
  After changing the IP address of my DB server, my DB works perfectly.
  However, I can connect only to APEX locally using localhost in the URL. I can not connect to APEX of remote machines, although I can connect to the DB of remote machines using SQL Developer very well.
  
  Do I need to make changes to the gateway PL/SQL embedded, that I use to connect to the APEX? How can I do?
  
  Thank you very much
  Best,
  Peter

  Hi Peter,.
  >
  After changing the IP address of my DB server, my DB works perfectly.
  However, I can connect only to APEX locally using localhost in the URL. I can not connect to APEX of remote machines, although I can connect to the DB of remote machines using SQL Developer very well.

  Do I need to make changes to the gateway PL/SQL embedded, that I use to connect to the APEX? How can I do?
  >
  With EPG, you don't need to make any configuration changes, you have to work on the new IP/hostname.

  You could try running the following just in case wherever it may help, as SYSDBA

  SQL> EXEC DBMS_XDB.setlistenerlocalaccess(FALSE);
  SQL>COMMIT;
  

  See you soon,.

• Service does not start after change of IP address on the server of SRM

  Here is the log.  The IP address has been changed, but I don't know how to take the side of MRS.?

  Journal of VMware Site Recovery Manager, pid = 4064, version = version 1.0.1 build-128004 =, = release, section = 2 option

  Cannot create the writer console

  Value flush dir "C:\Documents and Settings\All Users\Application Data\VMware\VMware Site Recovery Manager\DumpFiles"

  The initialization of the DBManager

  Current working directory: C:\Program VMware Site Recovery Manager\bin

  TaskMax = 10, IoMin = 1, IoMax = 21

  Try DrExternalRecoveryApi

  Plugin path 0: dr-external-recovery - api dll

  Absolute path of the plugin 0: C:\Program VMware Site Recovery Manager\bin\dr-external-recovery-api.dll

  Try RecoverySecondary

  Plugin path 1: dr-secondary - recovery.dll

  Absolute path of the plugin 1: C:\Program VMware Site Recovery Manager\bin\dr-secondary-recovery.dll

  Try SanProvider

  Plugin path 2: dr - san - provider.dll

  Absolute path of the plugin 2: C:\Program VMware Site Recovery Manager\bin\dr-san-provider.dll

  Try TestProvider

  Plugin 3 path: dr-test - provider.dll

  Absolute path of the plugin 3: C:\Program VMware Site Recovery Manager\bin\dr-test-provider.dll

  DrExtApi Instance of Service is initialized.

  Plugin has started.

  'SanProvider' provider has MoRef 'dr.primary.SanReplicationProvider:PrimarySanProvider '.

  Registered provider 'SanProvider '.

  'SanProvider' provider has MoRef 'dr.secondary.SanReplicationProvider:SecondarySanProvider '.

  Registered provider 'SanProvider '.

  Plugin has started.

  ' Provider 'TestProvider' has MoRef ' Dr. PrimaryTestProvider:primary - test provider.

  Registered provider 'TestProvider '.

  ' Provider 'TestProvider' has MoRef ' Dr. SecondaryTestProvider:secondary - test provider.

  Registered provider 'TestProvider '.

  Plugin has started.

  LocalSite already installed - good!

  Vmacore::InitSSL: doVersionCheck = true, handshakeTimeoutUs = 120000000

  VC connection: connection as the user "administrator."

  VC connection: logged in session F5EDC747-1344-4F98-82FB-038BB9D42933

  The specification of proxy for extension com.vmware.vcDr points to 172.20.0.168, not to this host

  Check with the local VC server is not valid

  Initialization of service content: unexpected exception 'class Vmacore::Exception' record with the local VC server is not valid

  Application error: check with local VC server is not valid. Closing...

  Unable to send the request. A new attempt. Error: class Vmacore::CanceledException (operation has been cancelled)

  VMware-Dr. service stopped

  Z OS

  I tried this on my own server and that you couldn't make it work.  I ended up just reinstall SRM, keeping the same database - NBD since most of the settings are there anyway.  Later, I came across a blog (which I can't find now) that said that VMware supports only a reinstall after changing the IP address.

• After changing the administrator password in windows server 2003, I can not connect the next day why?

  After changing the password in windows server 2003, when the new password take effect?

  Hello

  In dealing with the problem with Windows Server 2003, it would be preferable to send the same in the Technet community. http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

  Hope the information is useful.

• Internet connection is slow after changing the MAC address

  * Original title: win7... problems with internet after changing the WIRELESS card MAC address

  I have win7 home ed... .i tried to change my WIFI MAC address of the card (I had a reason to do so), SMAC program change but I could not, the address remained the same... I changed my mind... has decided to forget about this topic... but unfortunately, I had a big problem (very probably)... the internet connection is too slow or stop a few times pages load too slowly or especially do not charge. downloads are always stop in network on Chrome error... I tried a different browser to check, but the problem exists with all explorers, it's big terrible trouble please help me (Note: this problem is related to some how with internet traffic... late night speed is much better, but not 100%... but of course not as speed) ", I had before changing to MAC)... Thank you very much

  Hello

  1. what made you want to change the MAC address?

  2. what exactly happens while you are trying to connect to the internet?

  3. you receive an error code or error message? If Yes, what is the full error message?

  4 have you checked the issue in internet explore as well?

  Please follow the steps below and we update with the results.

  Method 1: Run the network troubleshooter, and check.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  Please try following the steps provided in the article and check out them.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  For more information, see the articles and check out them.

  10 tips to help improve your wireless network

  http://www.Microsoft.com/athome/Setup/wirelesstips.aspx#fBid=hq7zl63PiZ9

  Why is my Internet connection so slow?

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slow

   

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Let us know if it helps!

• After changing the port (1521 to 1525 in listener.ora and tnsnames.ora) OEM: the database is down

  Hello

  I'm installing Oracle Database 11 g 2 (11.2.0.4) on Oracle Linux 7.1.

  In short, what I'm trying to do now is changing the default port of 1521 to 1525.

  So I stopped the listener (lsnrctl stop) and then changed my listener.ora and tnsnames.ora:

  Listener.ora

  listener.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora

  # Generated by Oracle configuration tools.

  LISTENER =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))

  )

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP (PORT = 1525))(HOST = localhost))

  )

  )

  ADR_BASE_LISTENER = / u01/app/oracle

  tnsnames.ora

  tnsnames.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora

  # Generated by Oracle configuration tools.

  BI =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP (PORT = 1525))(HOST = localhost))

  )

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = bi)

  )

  )

  And then changed the local_listener:

  SQL > ALTER SYSTEM SET LOCAL_LISTENER = "(ADDRESS = (PROTOCOL = TCP)(HOST=localhost) (PORT = 1525))";

  SQL > ALTER the REGISTRY SYSTEM;

  Finally, I started the listener (lsnrctl start) again.

  Then I tried to connect using Oracle SQL Developer to the customer. The port of 1525 works perfectly well.

  The problem is, when I open the OEM (Oracle Enterprise Manager), it says: "the database is down. Please specify the credentials of the host to access the restart and database diagnostic tools," which is like this: http://imgur.com/oKLPW65

  So I logged on the account of the host, and it shows that the database instance, listener and the agent is all down like this: http://imgur.com/Bzr84bz

  It seems that the port used by the OEM is always 1521.

  What should I do? Can someone help me solve the problem?

  Thanks in advance.

  UPDATE:

  After changing the emoms.properties & the targets.xml (thanks to Elisabeth), you will need to reconfigure dbconsole using emca.

  So what I'm doing is decreasing the config:

  $ emca - deconfig dbcontrol db-rest drop

  and then create again:

  $ emca - create config dbcontrol db-rest

  Voila.

  Best regards

  Jerry Antonius

  Hello

  Try to change the port numbers in the following files

  Don't port no 1521 to 1525

  $ORACLE_HOME /_SID/sysman/config/emoms.properties

  oracle.sysman.eml.mntr.emdRepPort = 1525 (before 1521)

  $ORACLE_HOME /_SID/sysman/emd/targets.xml

  (Before 1521)

  (Before 1521)

• Satellite Pro T130 - 14L: 100% CPU use of acpi.sys after changing the HDD to SSD

  Hello

  because I changed my for one SSD HARD drive and reinstalled Windows 7 with 64 bit on this subject, my system works frequently in 100% CPU utilization caused by kernel module acpi.sys, I discovered with process Explorer and confirmed by recording an ETL file.

  This problem occurs once an hour on average, sometimes after 10 minutes of functioning of the system and sometimes after two hours, no matter which programs are running and whether or not I is actively using the computer. When I noticed a hanging and see this 100% cpu core in the process Explorer window are currently in use, I always need to save my work (which may take a few minutes) and restart the computer.

  I could live with that, but it's pretty nasty. My bios is up to date (version 2.70), as well as my other drivers (no error and no virus found). In other forums I've read, these problems could be avoided by changing the energy registers something Windows settings as never go to sleep of the SSD, but it works in my case as I disabled all energy saving options in Windows and I still have this problem.

  Is there maybe an update of the unofficial bios that could solve this problem?
  I read in another forum, that an unofficial bios update Dell fixed a similar problem on a Dell computer.

  Can someone help me solve this problem please?

  Details of process Explorer:
  The wire with TID 160 and the start address:

  ACPI. SYS + 0X1AF7C

  suddenly starts using 100% CPU and does not stop until you restart.
  Similar problem as in this forum for a Dell PC:
  https://social.technet.Microsoft.com...UM=w7itproperf

  Unlike the Dell problem, there is no appropriate-updated bios for me, could you help me if you could tell me how to stop the kernel module (if it starts hanging or even before). Then I could at least avoid frequent restarts.

• DPM appearing is not on DMM after changing the default password (5.2)

  I had to reset my DMP 4305 G to the default settings after the DMP redeployment to a new location.

  I have a static IP assigned to the DPM, but he wouldn't let me not get pass the login screen without changing the password.

  Once I changed the password, the DMP is no longer present on the DMM as connected, and I can't push orders to him.

  Hello

  Try this:

  Go to digital signs, settings, server settings and change the user name and password to match the new.

  Note that this will effect DMP all so be sure that you have the same login on all DMP information.

• HTML refresh after reboot the server

  Hello all

  Compliments of the season

  I recently edited some of the HTML files in our 11.7 OBIEE environment. (toc.htm, biee0088.htm and a few others)

  After that the server restarted al content of the files changed to its original state, thus eliminating all of my changes that I made.

  Is there a temp directory where these files can be stored?

  Concerning

  Benoit

  Can be analytics.war

  check the Console Home > summary of deployments >

• Get-VMHost: you have changed the world: DefaultVIServer and global: DefaultVIServers system variables. This is not allowed. Please reset them to $null and reconnect the server vSphere.

  Hello world

  After the upgrade to PowerCLI version 5.1 however I can't run even the simplest command because it always ends up with the following error:

  Get-VMHost: you have changed the world: DefaultVIServer and global: DefaultVIServers system variables. This is not aRA. Please reset them to $null and reconnect the server vSphere.

  C:\Users\Albert\AppData\Local\Temp\7900df01-f6c1-48c6-ac1e-047dfff90fb6.ps1:1 tank: 11
  + Get-VMHost < < < <
  + CategoryInfo: NotSpecified: (:)) [Get-VMHost], InvalidState)
  + FullyQualifiedErrorId: VMware.VimAutomation.ViCore.Types.V1.ErrorHandling.InvalidState, VMware.VimAutomation.ViCore.Cmdlets.Commands.GetVMHost

  Can someone please suggest to me how to fix the script for my v3.2.0 PowerGUI IDE can work with the latest PowerCLI in my computer laptop 64 bit Windows 7?

  Thank you.

  And I just tried with PowerGui (same versions of PowerGUI and PowerCLI you use), no problem.

  Must be something local on your desktop.

  Maybe try a uninstall/reinstall of PowerGUI?

• The former "cannot change the power state of virtual machine: the process has exited with an error: end of the error message" thing again (Fedora 8/Server 1.08)

  OK, this problem beautifully undescriptive I've seen caused by what seems to be dozens of things happening for me.

  I made the mistake of horrible update my FC8 kernel to the latest one (2.6.26.8 - 57.fc8).  Mind you, that's all that's changed.  It was with a 1.06 server with happiness and perfectly good computers running virtual in use before the upgrade.

  After the new kernel and reboot, I had to rebuild vmmod.  I had to get a fix of any - any later that I used with my previous kernel (116 does not solve the problem of compiling) so I used all-any117d.  Update like a champion.

  Try to turn on a VM and Ihanta!, the above error.

  Nothing else was changed.

  I tried the upgrade to VMware Server 1.08.  Used all-new any117d - update OK.

  Error again.

  I have re-run the compilation, this time to say 'yes' to what the installation script to "adjust the permissions of all virtual machines in xxxlist" or whatnot.

  Error again.

  1. status of /etc/init.d/VMware

  Networking networking on/dev/vmnet0 is running

  Invited only on/dev/vmnet1 network is running

  Network invited only on/dev/vmnet8 is running

  NAT networking on/dev/vmnet8 is running

  Responsible vmmon module

  Loaded module Vmnet

  FWIW, I compile as long as root, but have always run VMware server from my UID nonroot.

  What now?

  I'm in the same boat.  Fedora 8 2.6.26.8 - 57.fc8 #1 SMP

  I have tried uninstalling/reinstalling v1.0.6 thru 1.0.8 with all 116 updates and 117d.   117D compiles with every version of server but when I try to turn on a virtual computer I get this error.

  Cannot change the power state of virtual machine: the process has exited with an error:

  vmxvmdb: name of the Index generated by the configuration file

  POST (no connection): Version mismatch with vmmon module: expected 138.0, obtained 168.0.

  You have a bad version of the module kernel "vmmon.

  Try reinstalling VMware Server.

  POST (no connection): failed to initialize the surveillance apparatus.

  Failed to initialize the virtual machine.

  End of the error message.

  I found several posts other people have this problem but

  they are months with no recent activity and nothing that solved the problem.  I found appeared

  to get a fix, one updated the all an update that corrects the problem for

  2.6.26 performing several nuclei, but the link for the update on TI-psycho appears to be dead.  Here is the link to the discussion

  http://Fedoraforum.org/Forum/showthread.php?t=199026&page=2

  Of course, I would like to know how to solve this problem as well.

  Thank you

• CRS does not come after reboot the server in Oracle11g r2 11.2.0.1.0

  Dear Oracle gurus
  
  Our platform:
  ORACLE11G r2 RAC/GRID 11.2.0.1.0
  ReadHat Enterprise Linux5.3 64-bit
  
  
  RAC - 2 NŒUD
  [root@xyz-ch-aaadb-02 evmd] # /u01/app/11.2.0/grid/bin/crsctl check crs
  CRS-4638: Oracle high availability Services is online
  CRS-4535: cannot communicate with Cluster Ready Services
  CRS-4530: communication failure communicating with Cluster Synchronization Services daemon
  CRS-4534: can not communicate with the event Manager
  
  RAC - 1 NŒUD
  [root@xyx-ch-aaadb-01 crsd] # /u01/app/11.2.0/grid/bin/crsctl check crs
  CRS-4638: Oracle high availability Services is online
  CRS-4535: cannot communicate with Cluster Ready Services
  CRS-4530: communication failure communicating with Cluster Synchronization Services daemon
  CRS-4533: Event Manager is online
  
  RAC - 1 NŒUD
  crsd.log
  2011-08-21 00:35:27.913: [CSSCLNT] [3047883232] clssscConnect: gipc request failed with 29 (0x16)
  2011-08-21 00:35:27.913: clsssInitNative [CSSCLNT] [3047883232]: connection failed, rc 29
  2011-08-21 00:35:27.914: [CRSRTI] [3047883232] CSS isn't ready. Status received 3 of CSS. Waiting for a status of good...
  
  2011-08-21 00:35:28.915: [CSSCLNT] [3047883232] clssscConnect: gipc request failed with 29 (0x16)
  2011-08-21 00:35:28.915: clsssInitNative [CSSCLNT] [3047883232]: connection failed, rc 29
  2011-08-21 00:35:28.916: [CRSRTI] [3047883232] CSS isn't ready. Status received 3 of CSS. Waiting for a status of good...
  
  RAC - 2 NŒUD
  crsd.log
  
  2011-08-21 00:38:52.225: [CSSCLNT] [3198087648] clssscConnect: gipc request failed with 29 (0x16)
  2011-08-21 00:38:52.225: clsssInitNative [CSSCLNT] [3198087648]: connection failed, rc 29
  2011-08-21 00:38:52.225: [CRSRTI] [3198087648] CSS isn't ready. Status received 3 of CSS. Waiting for a status of good...
  
  2011-08-21 00:38:53.228: [CSSCLNT] [3198087648] clssscConnect: gipc request failed with 29 (0x16)
  2011-08-21 00:38:53.228: clsssInitNative [CSSCLNT] [3198087648]: connection failed, rc 29
  2011-08-21 00:38:53.228: [CRSRTI] [3198087648] CSS isn't ready. Status received 3 of CSS. Waiting for a status of good...
  
  Please help solve the problem.
  Let me know if you required information.
  
  Concerning
  Hitesh Gondalia

  hitgon wrote:
  We correctly the required permissions and ownership changes before we install the RAC.
  But after restarting the server.

  Please find the required papers.

  [root@xyz-ch-aaadb-01 ~] # ls-l/dev/sd *.
  BRW - r - 1 root disk 8, 0 21 August 00:20 / dev/sda
  BRW - r - 1 root disk 8, 1 Aug 21 0020: / dev/sda1
  BRW - r - disc 1 root 8, 2 21 August 00:20 / dev/sda2
  BRW - r - 1 root disk 8, 3-21 August 00:20 / dev/sda3
  BRW - r - 1 root disk 8, 4 August 21, 00:20 / dev/sda4
  BRW - r - 1 root disk 8, 5 August 21, 00:20 / dev/sda5
  BRW - r - 1 root disk 8, 6 August 21, 00:20 / dev/sda6
  BRW - r - 1 root disk 8, 16, 21 Aug 00:20 / dev/sdb
  BRW - r - 1 root disk 8, 32 21 August 00:20 / dev/sdc
  BRW - r - 1 root disk 8, 48 21 August 00:20 / dev/sdd
  BRW - r - 1 root disk 8, 49-21 August 00:20 / dev/sdd1
  BRW - r - 1 root disk 8, 64 21 August 00:20 / dev/sde
  BRW - r - 1 root disk 8, 65 21 August 00:20 / dev/sde1
  BRW - r - 1 root disk 8, 80 21 August 00:20 / dev/sdf
  BRW - r - 1 root disk 8, 81 21 August 00:20 / dev/sdf1
  BRW - r - 1 root disk 8, 96 21 August 00:20 / dev/sdg
  BRW - r - 1 root disk 8, 97-21 August 00:20 / dev/sdg1
  BRW - r - 1 root disk 8, 112 21 August 00:20 / dev/sdh
  BRW - r - 1 root disk 8, 113 21 August 00:20 / dev/sdh1

  [root@xyz-ch-aaadb-02 ~] # ls-l/dev/sd *.
  BRW - r - 1 root disk 8, 0 21 August 00:20 / dev/sda
  BRW - r - 1 root disk 8, 1 Aug 21 0020: / dev/sda1
  BRW - r - disc 1 root 8, 2 21 August 00:20 / dev/sda2
  BRW - r - 1 root disk 8, 3-21 August 00:20 / dev/sda3
  BRW - r - 1 root disk 8, 4 August 21, 00:20 / dev/sda4
  BRW - r - 1 root disk 8, 5 August 21, 00:20 / dev/sda5
  BRW - r - 1 root disk 8, 16, 21 Aug 00:20 / dev/sdb
  BRW - r - 1 root disk 8, 32 21 August 00:20 / dev/sdc
  BRW - r - 1 root disk 8, 48 21 August 00:20 / dev/sdd
  BRW - r - 1 root disk 8, 49-21 August 00:20 / dev/sdd1
  BRW - r - 1 root disk 8, 64 21 August 00:20 / dev/sde
  BRW - r - 1 root disk 8, 65 21 August 00:20 / dev/sde1
  BRW - r - 1 root disk 8, 80 21 August 00:20 / dev/sdf
  BRW - r - 1 root disk 8, 81 21 August 00:20 / dev/sdf1

  
  BRW - r - 1 root disk 8, 96 21 August 00:20 / dev/sdg
  BRW - r - 1 root disk 8, 97-21 August 00:20 / dev/sdg1
  BRW - r - 1 root disk 8, 112 21 August 00:20 / dev/sdh
  BRW - r - 1 root disk 8, 113 21 August 00:20 / dev/sdh1

  Concerning
  Hitesh Gondalia

  Hello

  Permission vote drive and the drive to vote changed after the reboot. sustain the permissions and ownership of roc and drive to vote even after reboot. check out this storage admin, they should be able to do.
  After this test restart again and see the result

  Hope this helps

  See you soon

• OAS Enterprise Manager displays wrong Hostname after reinstalling the server

  HY,
  
  We have an AEO 10.1.2.0.2 with and the 10g (10.2.0.1.0) database.
  Ater a systemcrash we had to reinstall the DB (dbf files come from a backup) and the OAS.
  We decieded to rename the server.
  
  But now, we have the following problem: the Enterprise Manager show the old hostname.
  I see the wire Re: Oracle reports stop working after joining the server to the domain!
  that points to the script "cmd /c chgiphost.bat - mi".
  but he has only an error of java on our server:
  "Exception in thread"main"java.lang.NoClassDefFoundError: oracle/chgip/start.
  
  What's wrong?
  And what I need to change the hostname in DB as well? (I searched a few dbf files and found a lot of old hostnames...)
  
  Thanks in advance
  
  Published by: TenGor March 25, 2009 10:36

  Regarding the error you get to run the chgiphost script, make sure you have your env $ORACLE_HOME. the properly defined variable (pointing to application server not the Pb of House).

  Thank you
  Shail

• IMac locked out after changing the sharing and HD permissions

  Made a big mistake with my iMac internal sharing and permissions of HD.   I was experimenting with sharing and permissions of the HD info panel section in the administrator account.    In this article, I've changed the 'everyone' naming 'no access', but in doing so, it froze the machine.  Nothing did not.  I tried to restart, but after that the Apple logo and progress bar appears briefly, the screen went white.

  I tried to make a backup using Time Machine, but when the time came to clear the HD and replace it with the backup TM, I got an error message saying that the system could not erase the HD.  I tried to go into Safe Mode, but he continues to send me the recovery mode.

  I have a boot disc separate I made in Carbon Copy Cloner who is somewhere else right now but I can get, and maybe I can boot from that and do a total deletion of the internal HD and start again.  But I can do in the meantime?  It seems that a configuration option has locked me completely out of the HD to the iMac.

  Thank you

  Ed

  To keep track, I tried something different. I used the option to reinstall OS X when the pane of the utility is on the rise.  My iMac then crossed the download process and reinstall OS X.  After 40 minutes, when he was all done, my machine is back with the connection, settings, and data in place.  I didn't even do a time Machine reinstall data.  Problem fixed.

  Moral of the story is, don't play with fixed and permission of a lot!

• After that I changed the apple ID password I can not connect to facetime

  After that I changed the apple ID password, I can not connect to facetime

  Update your password for Facetime, too.