Satellite Pro T130 - 14L: 100% CPU use of acpi.sys after changing the HDD to SSD

Similar Questions

• Satellite Pro P200-HD: how to use it with Win XP

  Recently, I received the new Satellite Pro P200 HD of Getech. I asked Getech to change the XP operating system because my University will not support Vista. I was told that some features are lost with XP, such as the hot key utility and I agreed to go ahead.

  However, I was not informed that the sound is scratchy and the video will behave as if I play a scratched CD.
  It is true with windows sounds as well. I was not able to enjoy the music or video. I have all the drivers updated and the new Bios XP released recently has been updated.

  Please does anyone know someone using this model with XP as an operating system with the sound and video works properly?
  This would mean that I was sold a laptop with a defective sound equipment and should get a replacement because I had this problem from day one.

  Thanks for the help in advance.
  Calvin

  * @ Vivien *.

  How about this:
  http://EU.computers.Toshiba-Europe.com-> support download &-> download drivers

  There, you might choose the satellite Pro P200 to download XP drivers

• How to enter the BIOS on Satellite Pro NB10-A-100?

  Hello

  I have a laptop Toshiba Satellite Pro NB10-A-100 and I want to enter the BIOS Setup and I can't.
  What is the key combination to get?

  Thanks in advance.

  Perform a complete shutdown in Windows 8 - http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
  Restart your computer and try to use F2 or F12. If you use F12 there should be opportunity to enter the laptop configuration settings.

  Please test and send feedback.

• Satellite Pro T130 - Canoe turn on 3G WWAN

  Hello

  I have a Satellite Pro T130, Win7 Pro 64

  I had a few problems with the Ericsson F3607gw connection, and I was wondering if this is the right place to search for answers.

  1 to 3G _ RF _ power problem

  If I update to 1.4.0.10 then I can't turn on the 3G radio. There is no hardware on the laptop switch and using the software switch Fn + F8 has no effect on switching the radio on or off, it remains off. Rear winding to the power utility earlier (T3G140701 F36) makes the problem disappears, but is there a fix I missed somewhere to use the 1.4.0.10? I can live with that, unless 1.4.0.10 something that I don't know that I'm missing.

  Problem 2 - Ericsson driver with ConfigFree

  I've recently updated the driver package from Ericsson of R4C02 to R6A06 (Ericsson driver version 1.5.0.5). After doing this, the Ericsson 3 G connection no longer appears in the list of devices in ConfigFree! It's a bit annoying, because I can not include 3G (which I use a lot when they travel) in one of the profiles ConfigFree more. I have enable/disable the 3G connection by accessing the control panel and by using network connections.
  I upgraded 8.0.23 ConfigFree 8.0.27 but this did not help.

  If I missed fixes for these issues, I would be grateful if someone could point me in the right direction.

  Thank you

  Hello

  AFAIK the ConfigFree software is diagnostic software and cannot be used to set up the 3 G or WiFi.

  > Rear winding for the previous electricity utility (T3G140701 F36) makes the problem disappears, but is there a fix I missed somewhere to use the 1.4.0.10? I can live with that, unless 1.4.0.10 something that I don't know that I'm missing.

  If you have any problems using the old version, then you should stay with a good running version.

  This is a Toshiba 3 G portal:
  http://APS2.toshiba-tro.de/WLAN/index.php?page=3gdownloads

• Backlit keyboard for Satellite Pro T130

  I have a Satellite Pro T130 I have difficulties to use in dark or poor light. Is there an option of backlit keyboard? If yes how I turn it on?

  Hey Buddy,

  I checked the specs on the official website of Toshiba's Satellite Pro T130 and it seems this model isn't t equipped with backlit keyboard and insofar as all T130 models using a standard keyboard of half bright.

  So I think you have to life without this feature on T130 ;)

• Vista drivers for new Satellite Pro L670 - 14L

  So I have been serching for a laptop of decent game and found: Toshiba Satellite Pro L670 - 14L to be a good combination power/price
  but after reading some reviews, I discovered that many people's complaint that the toshiba drivers are not updated.
  that seems to be true because the latest drivers for my P300 with 4500 m are 2008!

  So, I checked for L670 Vista display drivers and did not find one! Even for Win7 do not seem old already,
  is that mean Toshiba is not compatible Vista more? I have to use windows 7 only?

  I can see in the specifications of the laptop your laptop came with WIN7 64 BITS HOME PREMIUM.
  Can you confirm this?

  Why are you asking about the Vista drivers if you got the new OS to Win7. You want to use Vista or what?
  I want to say Win7 is much better than old Vista OS so I put t understand what you exactly want. To use Vista or you ask here for more recent WIn7 display driver?

• 8 GB ddr3 on Satellite Pro L670 - 14L installation is possible?

  I would buy this laptop and I need to know something about its capabiliities of upgrade:
  -Can I replace the module 2 GB with 2 modules of 4 GB (8 GB total)
  -can I mount a second HD on this model?

  > - Can I replace the module 2 GB with 2 modules of 4 GB (8 GB total)

  After it's specifications:

  http://UK.computers.Toshiba-Europe.com/innovation/product/Satellite-Pro-L670-14L/1086890/toshibaShop/true/

  standard: 2 048 MB
  maximum extension: 8 192 MB
  technology: DDR3 RAM (1 066 MHz)

  You can spend up to 8 GB DDR3

  > - can I mount a second HD on this model?

  I'm not familiar with this model and do not know if there is an available slot. but you can use the external hard drive.

• Toshiba Satellite Pro T130 w / Windows 7 Home Ed - Dynadock U10 does not

  Any help is appreciated here.

  Recently purchased a new Toshiba Satellite Pro T130 laptop and a Toshiba Dynadock U10. Laptop has Windows 7 Home Edition is installed.

  Want to Toshiba to bind in Dynadock for wired keyboard, VGA screen, mouse. Installed software Dynadock and get and 'incompatible pilot' error no message - no indication of which, although. Computer laptop seems to be docked, however impossible to get VGA to work.

  I tried to install on a Lenova Thinkpad with Windows XP and it works fine with this, but not her own brand of Toshiba?

  Thank you

  Have you used the latest version of the software ""?
  [http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 4 & selFamily = 376 & selSeries = 209 & selProduct = 834 & STAS hortMod = null & language = 13 & selOS = 29 & selType = all & year = upload & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = a he's & selectedLanguage = 13 & type = all & page = 1 & ID = 72230 & OS ID = 29 & driverLanguage = 42]-W7 32
  and for 64 bit
  [http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 4 & selFamily = 376 & selSeries = 209 & selProduct = 834 & STAS hortMod = null & language = 13 & selOS = 30 & selType = all & year = upload & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = a he's & selectedLanguage = 13 & type = all & page = 1 & ID = 72230 & OS ID = 30 & driverLanguage = 42]

• Satellite Pro T130 - WLAN stops working on battery

  WLAN in Toshiba Satellite Pro T130 will not properly work on battery
  Toshiba Satellite Pro T130 with Windows 7-64 bit

  My Realtek RTL8191se card stops working when the notebook computer is on battery power. Everything is OK on the socket. On battery it works OK for a few seconds/minutes and then drop connectivity. The driver is 2015.1.427.2010 - the latest version.

  I disabled the settings related to energy-saving WLAN cards.

  Any ideas on how to find the cause of this problem?

  Thanks in advance

  Chaouki

  Hey Buddy,

  Well, generally, I would suggest that you should disable Windows in energy saving power management feature, but you have already done this... Make sure that this power WLAN economic option is set for maximum Performance, even for the battery mode and all power profiles!

  And what BIOS up-to-date? You have the latest version of the BIOS installed or using an older version?

• Built in mic has stopped working on my Satellite Pro T130

  Dear Forum,

  the microphone of my Satellite Pro T130 15F stopped working a couple of days at a time.

  It captures the white noise.
  But he responds only to knock on the place where it is located next to the built-in webcam. It does not pick up normal voice or cry out to him...

  Can't bring any changes to the software that could influence.

  What I've done so far: deleted drivers, installed new, updated all Toshiba Software and downloaded and run all the stuff suggested to this problem.
  And of course, it is not set to mute or upgraded to the bottom.

  Still no cure.
  What's next?

  Thanks much adavance.

  Hmmm, it makes a static noise? Kinda sounds like hardware related issue
  But check the microphone settings in the control panel-> sound-> recording tab
  Here, you should see two entries; internal microphone and external microphone port.
  The internal microphone must be turned on!

  In addition, the internal mic belongs to the webcam. In the assistant webcam-> settings-> audio tab, you can increase the maximum microphone volume.
  Check this box

• Satellite Pro T130 - problems in sleep mode after you install the update wireless

  After installing the 3G modem & updates on day of Wireless manager from 29 September, my laptop began to have trouble waking sleep mode. Most of the time I had to hard stop. I solved currently the changing options issued for the "sleep mode" in the Panel, for the most part by turning off the advanced features (hybrid sleep, sleep, sleep network adapters usb). However, I want to solve the problem no doubt, as the current options require more time to enter the mode 'sleep'.

  My laptop is a Toshiba Satellite Pro T130 running under Windows 7 64-bit.

  Please help us :-)

  You have installed the updates recommended by Tempro?
  You can send us you have installed versions?

  I assume that with the old versions you didn t have this problem?

• Satellite Pro T130 - unable to wake from mode 'sleep'

  I have a Toshiba Satellite Pro T130 running Windows 7 Professional 64 bit.

  After installing the Wireless Update September 29, such Manager recommended by Tempro, I'm problems with an awakening of the mode standby. Most of the time my laptop just don't wake up more and all I can do is to the hard switch off and turn it back on. I tried to solve the problem by changing the configuration options of the advanced sleep mode, and it seemed to work for a while, and problems to restart again.

  Please help me with this issue, it is terribly annoying to have to turn off and turn on again everytime my laptop goes into mode 'sleep', not to mention the fact that I have to take care of not to let something unregistered, to avoid losing data.

  Thanks in advance.

  You have already started a thread on the same topic here:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=222143

  Please follow the first thread to prevent certain misunderstandings

• My Satellite Pro A300 series number is not found and can not get the upgrade to Windows 7

  When I get my Satellite Pro serial number, it is said that it is not in the database and I can't go any following get Windows 7.

  Can anyone help?

  Hello

  What model of laptop do you have exactly?

  Which from Toshiba Web site did you use to upgrade to Windows 7?

  Are you sure of your laptop is supported and upgraded Windows 7 ready?

• Installation problems after upgrade the HDD on Satellite Pro A120 (PSAC1E)

  Hello

  I've recently updated my Satellite Pro A120 with more memory and a larger hard drive. The memory I installed is 2 x 1 GB Module (DDR2-667) and the product number of the hard drive is MK2035GSS.

  My computer recognizes both of these upgradges, but since their installation I was able to install all applications (for example Norton Security etc) on my laptop - they seem to spend 1/2 to 3/4 of the way in which the installation process and then just quit smoking and become insensitive or an error message appears. I even tried to put the product recovery disc to try and erase everything and start over but even that does not load in entirely. Any ideas of what could be the cause? Also, I get messages of constant error on the screen and it blue screens and restarts frequently.

  If anyone has any ideas on what could be the cause, I would be extremely grateful for any help!

  Thank you very much

  Cblack

  Post edited by: cblack

  Hello

  just a question, than to the manufacturer that are the memory modules? And similar modules? Or do you have that you have installed other modules later.
  We can exclude the HARD drive because it doesn´t HARD drive installed. they do not cause bluescreens or similar. In very rare cases, the disk HARD COULD cause errors, but then the pladder or BSOD´s must be REALLY damaged and in your case, the HARD drive is brand new.

  It might be, that memory modules are not compatible with your machine. To avoid these incompatibility issues, you must use the modules of well-known such as kingston and toshiba brands. (I'd rather kingston, they work like a charm in my A100 Sat :))

  Would appreciate comments on your part.

  See you soon

• Satellite Pro A100 PSAASE: error Power Saver and LAN? After downgrade to XP

  Hello
  I have a toshiba satellite pro A100-psaase!
  I could not find this model on the toshiba site, so I chose the A100-psaas software.

  The laptop came with windows vista. I have it downgraded to windows xp, has chosen the psaas model so that I can download the drivers.

  I have 2 problems: the first is the eve of power software, it does not work. Start windows every time I get an error in the energy saver. I can not uninstall.

  My second problem is, that a windows pop who found a network controller and I can't find any software or driver for it. So in Device Manager, an exclamation point on the icon of the network controller.

  The funny thing is that I have internet and all.
  I can't find a solution to these two problems
  Thanks again

  Hello

  You have chosen the correct unit. The satellite Pro A100 PSAASE is the same model as PSAAS.
  I put t know why the power gain error appears, but for most of these errors occur because the tools and utilities have been installed in the wrong order!
  Seems that the installation instruction has been placed on the page of the driver Tosh! Read and follow the installation guide lines! Proper installation is important and necessary.

  The LAN drivers are also published on the page! There are 2 different versions. Try them both!
  The laptop supports a Lan Intel Ekron-R 82562GZ chip. Compatible drivers, you can also find on the Intel page!

  Good day