HTML refresh after reboot the server

Similar Questions

• CRS does not come after reboot the server in Oracle11g r2 11.2.0.1.0

  Dear Oracle gurus
  
  Our platform:
  ORACLE11G r2 RAC/GRID 11.2.0.1.0
  ReadHat Enterprise Linux5.3 64-bit
  
  
  RAC - 2 NŒUD
  [root@xyz-ch-aaadb-02 evmd] # /u01/app/11.2.0/grid/bin/crsctl check crs
  CRS-4638: Oracle high availability Services is online
  CRS-4535: cannot communicate with Cluster Ready Services
  CRS-4530: communication failure communicating with Cluster Synchronization Services daemon
  CRS-4534: can not communicate with the event Manager
  
  RAC - 1 NŒUD
  [root@xyx-ch-aaadb-01 crsd] # /u01/app/11.2.0/grid/bin/crsctl check crs
  CRS-4638: Oracle high availability Services is online
  CRS-4535: cannot communicate with Cluster Ready Services
  CRS-4530: communication failure communicating with Cluster Synchronization Services daemon
  CRS-4533: Event Manager is online
  
  RAC - 1 NŒUD
  crsd.log
  2011-08-21 00:35:27.913: [CSSCLNT] [3047883232] clssscConnect: gipc request failed with 29 (0x16)
  2011-08-21 00:35:27.913: clsssInitNative [CSSCLNT] [3047883232]: connection failed, rc 29
  2011-08-21 00:35:27.914: [CRSRTI] [3047883232] CSS isn't ready. Status received 3 of CSS. Waiting for a status of good...
  
  2011-08-21 00:35:28.915: [CSSCLNT] [3047883232] clssscConnect: gipc request failed with 29 (0x16)
  2011-08-21 00:35:28.915: clsssInitNative [CSSCLNT] [3047883232]: connection failed, rc 29
  2011-08-21 00:35:28.916: [CRSRTI] [3047883232] CSS isn't ready. Status received 3 of CSS. Waiting for a status of good...
  
  RAC - 2 NŒUD
  crsd.log
  
  2011-08-21 00:38:52.225: [CSSCLNT] [3198087648] clssscConnect: gipc request failed with 29 (0x16)
  2011-08-21 00:38:52.225: clsssInitNative [CSSCLNT] [3198087648]: connection failed, rc 29
  2011-08-21 00:38:52.225: [CRSRTI] [3198087648] CSS isn't ready. Status received 3 of CSS. Waiting for a status of good...
  
  2011-08-21 00:38:53.228: [CSSCLNT] [3198087648] clssscConnect: gipc request failed with 29 (0x16)
  2011-08-21 00:38:53.228: clsssInitNative [CSSCLNT] [3198087648]: connection failed, rc 29
  2011-08-21 00:38:53.228: [CRSRTI] [3198087648] CSS isn't ready. Status received 3 of CSS. Waiting for a status of good...
  
  Please help solve the problem.
  Let me know if you required information.
  
  Concerning
  Hitesh Gondalia

  hitgon wrote:
  We correctly the required permissions and ownership changes before we install the RAC.
  But after restarting the server.

  Please find the required papers.

  [root@xyz-ch-aaadb-01 ~] # ls-l/dev/sd *.
  BRW - r - 1 root disk 8, 0 21 August 00:20 / dev/sda
  BRW - r - 1 root disk 8, 1 Aug 21 0020: / dev/sda1
  BRW - r - disc 1 root 8, 2 21 August 00:20 / dev/sda2
  BRW - r - 1 root disk 8, 3-21 August 00:20 / dev/sda3
  BRW - r - 1 root disk 8, 4 August 21, 00:20 / dev/sda4
  BRW - r - 1 root disk 8, 5 August 21, 00:20 / dev/sda5
  BRW - r - 1 root disk 8, 6 August 21, 00:20 / dev/sda6
  BRW - r - 1 root disk 8, 16, 21 Aug 00:20 / dev/sdb
  BRW - r - 1 root disk 8, 32 21 August 00:20 / dev/sdc
  BRW - r - 1 root disk 8, 48 21 August 00:20 / dev/sdd
  BRW - r - 1 root disk 8, 49-21 August 00:20 / dev/sdd1
  BRW - r - 1 root disk 8, 64 21 August 00:20 / dev/sde
  BRW - r - 1 root disk 8, 65 21 August 00:20 / dev/sde1
  BRW - r - 1 root disk 8, 80 21 August 00:20 / dev/sdf
  BRW - r - 1 root disk 8, 81 21 August 00:20 / dev/sdf1
  BRW - r - 1 root disk 8, 96 21 August 00:20 / dev/sdg
  BRW - r - 1 root disk 8, 97-21 August 00:20 / dev/sdg1
  BRW - r - 1 root disk 8, 112 21 August 00:20 / dev/sdh
  BRW - r - 1 root disk 8, 113 21 August 00:20 / dev/sdh1

  [root@xyz-ch-aaadb-02 ~] # ls-l/dev/sd *.
  BRW - r - 1 root disk 8, 0 21 August 00:20 / dev/sda
  BRW - r - 1 root disk 8, 1 Aug 21 0020: / dev/sda1
  BRW - r - disc 1 root 8, 2 21 August 00:20 / dev/sda2
  BRW - r - 1 root disk 8, 3-21 August 00:20 / dev/sda3
  BRW - r - 1 root disk 8, 4 August 21, 00:20 / dev/sda4
  BRW - r - 1 root disk 8, 5 August 21, 00:20 / dev/sda5
  BRW - r - 1 root disk 8, 16, 21 Aug 00:20 / dev/sdb
  BRW - r - 1 root disk 8, 32 21 August 00:20 / dev/sdc
  BRW - r - 1 root disk 8, 48 21 August 00:20 / dev/sdd
  BRW - r - 1 root disk 8, 49-21 August 00:20 / dev/sdd1
  BRW - r - 1 root disk 8, 64 21 August 00:20 / dev/sde
  BRW - r - 1 root disk 8, 65 21 August 00:20 / dev/sde1
  BRW - r - 1 root disk 8, 80 21 August 00:20 / dev/sdf
  BRW - r - 1 root disk 8, 81 21 August 00:20 / dev/sdf1

  
  BRW - r - 1 root disk 8, 96 21 August 00:20 / dev/sdg
  BRW - r - 1 root disk 8, 97-21 August 00:20 / dev/sdg1
  BRW - r - 1 root disk 8, 112 21 August 00:20 / dev/sdh
  BRW - r - 1 root disk 8, 113 21 August 00:20 / dev/sdh1

  Concerning
  Hitesh Gondalia

  Hello

  Permission vote drive and the drive to vote changed after the reboot. sustain the permissions and ownership of roc and drive to vote even after reboot. check out this storage admin, they should be able to do.
  After this test restart again and see the result

  Hope this helps

  See you soon

• server control of automatic release after that the server took control

  Hello

  I have a vi that is not automatically "lock control" after that the server has regained control.

  Currently, in labview 8.2, when the server takes over the control of a vi, one must first unlock control of vi (by right-clicking and selecting "unlock") before a customer can request control again. Does anyone know how to prevent the automatic locking of the vi from the end of the server when it regains control.

  See you soon,.

  BrissyDrew

  Thanks NathanK,

  I found a solution. When I used the vi at the server end I was selecting the wrong option when I right click. I was by selecting "take back control" when I should have been by selecting "controller of report. This last option helped a client to regain control when he asked for it without the server having to give it up first.

  Thanks for your advice.

  See you soon

  BrissyDrew

• My Photoshop CC 2015 does not work correctly. After I edited some photos and I want to meet one of them, the program Terminates? After reboot, the program charges all files again...

  My Photoshop CC 2015 does not work correctly. After I edited some photos and I want to meet one of them, the program Terminates? After reboot, the program charges all files again...

  Hello

  Make sure that Photoshop is closed.

  1 - go to this place C:\Users\user name\AppData\Roaming\Adobe\Adobe 2015\AutoRecover CC in Photoshop

  You will be able to see all the. PSD file that opens automatically when Photoshop is open, delete or move all the files in this folder.

  2 - restart Photoshop and go to edit > preferences > performance UN check the gpu processor use and restart Photoshop.

  It should be working fine now.

  Thank you

• OAS Enterprise Manager displays wrong Hostname after reinstalling the server

  HY,
  
  We have an AEO 10.1.2.0.2 with and the 10g (10.2.0.1.0) database.
  Ater a systemcrash we had to reinstall the DB (dbf files come from a backup) and the OAS.
  We decieded to rename the server.
  
  But now, we have the following problem: the Enterprise Manager show the old hostname.
  I see the wire Re: Oracle reports stop working after joining the server to the domain!
  that points to the script "cmd /c chgiphost.bat - mi".
  but he has only an error of java on our server:
  "Exception in thread"main"java.lang.NoClassDefFoundError: oracle/chgip/start.
  
  What's wrong?
  And what I need to change the hostname in DB as well? (I searched a few dbf files and found a lot of old hostnames...)
  
  Thanks in advance
  
  Published by: TenGor March 25, 2009 10:36

  Regarding the error you get to run the chgiphost script, make sure you have your env $ORACLE_HOME. the properly defined variable (pointing to application server not the Pb of House).

  Thank you
  Shail

• Function 'Internet time' will automatically refresh after reboot - please help

  I can't get the "Internet time" auto time update function system after restarting the computer in windows 7.  He should tell me when the next synchronization will happpen, but this isn't unless I do it manually by clicking on the button update.  Then he went after the reboot.

  Example: If I click on the clock at the bottom right of the screen and then select "Change date and time settings" and then click on the tab "Internet time" he says: "this computer is configured to synchronize automatically with"time.nist.gov.  Then on the next line, he says: "this computer is configured to synchronize automatically on a regular basis.   However, I checked that he never does that.  Or he tells me when he is going to do.

  To temporarily solve the problem, I click on the "Edit settings" button and then click on 'Update Now' and he said, "the clock has been properly synchronized with time.nist.gov on 15/03/2010 at 22:25" for example. I press OK.  So far so good.  Now the tab "Internet time" has a line that reads, "next synchronization 16/03/2010 at 02:25.  Which is 4 hours later, because the specialpollvalue registry variable is set for 4 hours.

  THIS IS WHAT I WANTED!  But the next time I restart the computer and check under the tab "Internet time", it comes back again tell me what is the next synchronization.  And the problem comes back to where it will not refresh automatically.   So reboot he kills.  All this works fine on another computer with XP.  But on a new, clean installation of windows 7 that is not.  Am I missing something?  Is there a setting I need to adjust so that it can stay active after restarting?

  Time Service Tools Windows and settings
  http://TechNet.Microsoft.com/en-us/library/cc773263 (WS.10) .aspx

  At the end of this document are details on recording the time of Service.

  Regarding-

  "SpecialPollInterval".
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\TimeProviders\NtpClient

  Version
  Windows XP, Windows Vista, Windows Server 2003 and Windows Server 2008

  This entry specifies the special poll interval in seconds for the manual counterparts. When the indicator SpecialInterval 0x1 is enabled, W32Time uses this interval instead of a poll interval determine the operating system. The default value on the domain members is 3 600. The default value on stand-alone clients and servers is 604 800. »

  Maybe you will get better results if you set the default value for domain members (3600), rather that I assume you have set for the 2400?  He may not know your adjustment because he runs into some unknown to me, another setting?  I guess you did not literally any value to read "4 hours" instead of 2400 decimals or whatever is the equivalent of Hex, did you leave in any commas in the value?  Sorry for asking that, please don't be offended by the question, but more strange things occur.

• No service after upgrade the server to 5.2 on El Capitan

  I have a web server that was doing very well until I left the 5.2 update suggested to install OS X Server. I can't get to broadcast web pages. Screen sharing works always and nothing has changed on the routers, etc.

  I restarted the server after the update and restarted the server itself several times but keep getting connection via a browser failures.

  I did the upgrade even on other servers as well as the upgrade of Sierra. This server is running El Capitan, and is the only one that gave me problems. 5.2 server is not compatible with El Capitan?

  Some additional info:

  I can connect to the server through ftp and other services; just no web service.

  Port tests show that port 80 is not blocked

  Using the IP address I can get to the window of the home server.

  Accessibility means no services available

  Websites is on and I can't find anything that is not defined in law or is different than before the update.

• Constant problem: first time, a link is clicked: server not found. Refresh page and the server is immediately.

  Foxfire regularly gives me the error message: server not found - BUT if I hit refresh, the server 'not found' opens immediately 99.9% of the time. It's really annoying. Happens several times per session, but not every time I click on a link.

  Maybe you have a problem with IPv6.

  See http://kb.mozillazine.org/Error_loading_websites

• Services Exchange do not start automatically when rebooting the server (SBS 2011/07)

  Both services must be started manually after the server is restarted namely:
  Authentication based on the form of MS Exchange
  The MS Exchange RPC Client Access

  Try asking in the Windows Server forum:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• System Restore: after rebooting, the prompt window, says the system could not be restored.

  System Restore:

  All the points are there and trys to restore systems and restarts the restore. After the reboot, the prompt window, says the system could not be restored. Any suggestions?

  Hello

  There are a variety of reasons for system restore problems

  Norton and Norton product Tamper Protection is the main

  Read about it:

  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20101101224849EN&LN=en_US

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  You can try restoring the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  and malware can interfere with the restoration of the system

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• SWFVerification without restart/reboot the server

  I was now two occurrences of SWFVerification is not activating when the values are added to the application.xml for a client application.

  We allowed him with an empty dir, and any player will always through.

  I tried to add a "is not not-really-the - player.swf" to confirm that he will reject all other connections, and they always get through.

  I tried to reload the Application, and which also had no effect.

  In a previous proceeding, only after the virtual server is restarted, SWFVerification will start to work.

  This question quite important for us - as we host 100 s other connections of client application on several boxes that make SWFverification is not just simple 'reboot' these boxes.

  Any suggestion on how to get SWFVerification to work without having to restart the virtual server or FMS itself?

  Thank you.

  -Va

  Figured it out.

  From what I saw. the Admin "unloadApp" command is not an effect the SWFVerification. However, "reloadApp" seems to indulge the SWFVerification on a modified application.

  -Va

• GfxUI.exe has stopped working after rebooting the computer.

  Original title: error GfxUI.exe

  I've been running Vista business for a few years.  Last week, after the reboot, I get an error message that GfxUI.exe has stopped working.  After that I closed the error box, the PC works fine.  I updated the graphic driver Intel, but always the message.  Why now I get the message and how can I solve this problem?

  Hi Kea2300,

  Did you the latest changes on the system?

  This error message indicates to the Intel graphics driver.

  Because you tried to update the Intel graphics card, you can try to perform a clean boot and check if the problem persists.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

  Hope this information is useful.

• How do I link a button from the APEX to the HTML file stored on the server app?

  I hope that it will be simple for a person
  
  We have some word documents very technical I really didn't want to replicate in the oracle reports
  
  So I saved them as html documents, and when I opened then they look very well in IE
  
  I placed in the folder where our reports are stored, but I can't figure out how to create the URL to be placed behind a button in the APEX?
  
  Of course the oracle reports url will not work as long as the pdf and servlet uses
  
  Thanks in advance
  
  Chris

  Assuming you are using Apache?

  You can place your Word documents in the same folder as your current Apex images directory (or a subdirectory it) and then reference them with a URL of the form http://yourserver/i/sample_word_file.doc. Alternatively, you can add a new Alias entry to your dads.conf file (located in your Apache/modplsql/conf directory) to expose the folder on your Web server that contains your Word via a URL like http://yourserver/word_docs/ files

  For example

  /Word_docs/ alias "c:\my_docs\technical_word_docs/".

  Andy

• How to reboot the server Oracle Rac?

  Kind of beginner to the CARS, just started?

  I know that the order to stop it.

  Instances of database 1 stop

  2 stop the Services on the node database

  3. stop the node level apps

  4 stop the Listener

  Can someone let me know the order to restart?

  Thank you

  Hello

  Instances of database 1 stop

  2 stop the Services on the node database

  3. stop the node level apps

  4 stop the Listener

  1. If you stop instances of database - community services which if accessed by client customers that it will get the problem (they would say that they are unable to connect to your databases). The Central battery will go into an abnormal state - compared to your normal startup and shutdown procedure (reason for that since your listener are always up and try to provide services (services database).) Maybe they cannot provide the service because the database is out of service. If you need to stop your stack of middle ware initially.

  2. after the middleware stack you must work on the stop of the listeners and services (which is logically the scoop of cluster and data bases - right at the bottom) with other dependencies.

  3. then, you can stop the database followed by the applications node.

  4. Finally cluster ware

  -Pavan Kumar N

• After joining the Server Appliance Center virtual domain, you can see domain when you add permissions user

  Hello

  Help, please!

  section of the knowledge base on the particular issue is not the problem.

  Just deployed the vCSA 5.5 and joined to a Windows domain but I do not see the field to add AD groups because in my view, there is a question hour DST GMT.

  My domain controller Windows are running in UTC with Daylight Saving Time (UTC).  IM in the United Kingdom.

  If I connect directly to an ESXI host using the vSphere Client - time is correct and shows "the dates and times of hospitality have been translated into the local time of the vSphere Client.

  
  

  If I run the command on the Console of the vCSA date, time is one hour behind so out of sync with the domain controllers.  If it was winter, probably all work.

  
  

  No idea how to fix this?

  
  

  Thanks in advance.
  

  Can confirm you that you have done the following:

  • Join vCenter Server Appliance to the domain, i.e. the AD object is created in the "Computers" OR
  • Add the AD as an additional Source of identity domain using "Active Directory (Windows integrated authentication)"

  and you can not yet select the domain in the drop-down box when you try to configure permissions?

  André