After changing to DB for storage Var Client registry cleaning

Similar Questions

• Generation of recovery media after changing Windows 8 for Windows 8.1

  How can I create new media recovery on the 8.1 of Windows after changing Windows 8? HP support says that only 1 set of recovery media is allowed. My original game is to Windows 8. You want to avoid having to go through the lengthy procedure of update in case I need to go through the process of recovery with my original support recovery.

  Hi @john_f_g ,

  Thank you for visiting the Forums HP's Support and welcome. I looked into your problem on your HP laptop and needing to make a new copy of Windows 8.1.

  Software recovery of HP and Microsoft allows you to make only a backup recovery.

  You can order new media disc or USB flash device of here.

  Thank you.

• Unable to perform the backup after changing the password for SYS

  Hello everyone, I'm getting the "unable to perform the backup because the database is closed" error after performing a backup scheduled on the database. The database is clearly open, already tried rebooting the database/system, but without success. This is probably related to the very recent change of password for SYS. As we changed it, we were able to run the backup... Can I ren hollow backupset backup RMAN command, but without success with Enterprise Manager.
  
  Does anyone have an idea? Thank you!
  
  
  ATT,
  
  Gabriel.

  Have you updated the password in addition to credentials on the OEM... Otherwise, please update and try again.

• ID error 0x800cc19, after changing the settings for the account by Verizon.

  I changed my verizon for SMTP mail server settings.  I use windows live mail I can receive emails, but I changed may not send get error id 0x800cc19. I called verizon and they said it was a matter of microsoft.

  SSL must be checked.
   
   
  Verizon's POP3 account settings
  http://www22.Verizon.com/support/residential/Internet/fiosinternet/email/setup+and+use/questionsone/124289.htm
   
   

• BlackBerry smartphones can not send but can receive after changing the password for AOL

  Need to change password on AOL.  Able to receive emails, but cannot send!  Can send other accounts of e-mail on the BB.  No BES

  Thanks for the suggestions.  In the meantime, I actually did all those who, believe it or not.  Things seem to be resolved, but will keep these instructions in case of future problems.

• Can U help me to connect a lexmark Z2420 printer after changing the Charter for att inet & router?

  I got my printer Lexmark wireless connected to my network wireless of Charter, and then switch to att.  for quite awhile without printer.  tried today for a long time to connect.  no luck!

  Hi SueNeeman,

  -What operating system is installed on the computer?

  If you have installed Windows 7, then you can view this tutorial because it is designed to help you identify and fix common printer problems in Windows, including print errors, print spooler errors, and other issues that could prevent you from printing.

  Solve printer problems: http://windows.microsoft.com/en-in/windows/printer-problems-in-windows-help#fix-printer-problems=windows-7&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

  Thank you.

• Deficiencies in sleep mode after changing the password for sys

  Hi all

  11.2.0.1

  AIX6.1

  I changed our primary sys to db password and copy the "orapwdprod" of source dbs in "orapwdproddr" help dbs.

  But I noticed that the newspaper is not sync.

  
  

  1 SELECT ARCH. THREAD # "Thread", ARCH. SEQUENCE # 'last received sequence', Appl. SEQUENCE # "last sequence applied", (the centre ARCH. SEQUENCE #-APPL.) Sequence #) 'the difference '.

  2 FROM

  3 (SELECT THREAD #, SEQUENCE # FROM V$ ARCHIVED_LOG WHERE (THREAD #, FIRST_TIME) IN (SELECT THREAD #, MAX (FIRST_TIME) OF V$ ARCHIVED_LOG GROUP BY THREAD #)) ARCH.

  4 (SELECT THREAD #, SEQUENCE # FROM V$ LOG_HISTORY WHERE (THREAD #, FIRST_TIME) IN (SELECT THREAD #, MAX (FIRST_TIME) OF V$ LOG_HISTORY GROUP BY THREAD #)) APPL

  5 * WHERE ARCH. THREAD # = APPL. SORT THREAD # 1

  SQL > /.

  Last thread last sequence received sequence applied difference

  ---------- ---------------------- --------------------- ----------

  1                   2635                  2594         41

  
  

  Where can I check the error why is it not to apply logs acrhive

  Thank you

  zxy

  Transport is running.

  You must apply process is not running.

  Start posting (MRP) side as background process:

  ALTER database recover managed standby base disconnect from the session.

  
  

  Concerning

  Mr. Mahir Quluzade
  

• OAM11.1.1.5 - Dual fast connection after changing the system for OID store

  Hi all
  
  I could miss an important step probably, when configuring the OID as system store.
  I'm a double prompt to connect to the admin console.
  Please let me know if anyone has experienced this before.
  
  Concerning
  Vicky

  Hi Vicky,

  Yes, it happens, but if you add OID as a supplier for Weblogic authentication, then you should be at a single command prompt. I'm sure that there is a Note about it on MOS, but I can't find at the moment, the main steps are:

  -Log in to the WLS/console
  -go into Security Realms/myralm
  -Add your ldap as an authentication provider instance and set it to OPTIONAL (and the default provider for SUFFICIENT)

  These steps are necessary because /oamconsole use some of the features provided by the underlying WLS console - resources on WebGates, you won't see the double prompt if you perform the steps above.

  Kind regards
  Colin

• Major bug with storage Var MX 7.0.2 Client?

  I think I found what looks to be a pretty big bug for client variable storage in CFMX. Strangely, the bug actually exists in CFMX 6.1 and CFMX 7.0.2 (the two versions, I test against), but only cultures upward in 7.0.2. In addition, you will notice that I say it's a matter of client variable (it is), but the bug seems to be with JSESSIONID, I thought only relate to session variables. My statement of the problem is that the variable customer 'disappear' after having been defined. In a Word, I log onto my site, which fixed a couple of variables customer, and then when I browse another page on the site, client variables are no longer in existence (it seems as if I've never connected before). I'm running CFMX 7.0.2 Enterpise (deployment of WAR) on Red Hat Enterprise Linux 4.0 (update 3) using the internal JRun web server and using J2EE session variables.
  
  After a bit of detective work, I noticed by looking at the HTTP headers on my first visit to the site (with no existing cookie set) which JSESSIONID is defined * double * when I first hit my site. However, a JSESSIONID is being stored in cglobal table while the other JSESSIONID is stored in the actual cookie, which causes subsequent research of incompatibility. Therefore, it seems that if I have never connected before.
  
  Here are the relevant header information when you first visit the site:
  
  HTTP/1.x 200 OK
  Set-Cookie: CFID = 102; expires = Thu, August 14, 2036 13:20:27 GMT; path = /.
  Set-Cookie: CFTOKEN=66021081eab5f673-3609FCE3-CF52-FC2B-25E974A728406FC5;expires=Thu,14-Aug-2036 13:20:27 GMT; path = /.
  Set-Cookie: JSESSIONID = 583033e973025152237c; path = /.
  Set-Cookie: JSESSIONID = 58306b4060d425456d5c; path = /.
  Date: Tuesday, August 22, 2006 13:20:27 GMT
  Content-Language: en-US
  Content-Type: text/html; Charset = UTF-8
  Connection: close
  Server: JRun Web server
  
  See how there are two directives Set-Cookie JSESSIONID? The interesting part is that CFMX 6.1 (on Solaris, at least) is exactly the same, as long as the Set-Cookie guidelines double go. However, here's where 6.1 MX and MX 7.0.2 differ...
  
  If you look at what's coming in the real cookie compared to what is stored in the column 'data' in the table cglobal MX 7.0.2 you will see (based on the header above information):
  
  urltoken = CFID #= 102 & CFTOKEN #= d 66021081eab5f673-3609FCE3-CF52-FC2B-25E974A728406FC5 & jsessioni #= 583033e973025152237c #lastvisit = {ts' 2006-08-22 09:20:27 ""} #timecreated = {ts ' 2006-08-2209:20:26'}#hitcount=2#cftoken=66021081eab5f673-3609FCE3-CF52-FC2B-25E974A72840 6 FC 5 #cfid = # 102}
  
  The key bit is the JSESSIONID value, that has the value 583033e973025152237c. However, the cookie JSESSIONID value is 58306b4060d425456d5c.
  
  The same comparison with CMFX 6.1, the HTTP header info:
  
  HTTP/1.x 200 OK
  Set-Cookie: CFID = 3499; expires = Thu, August 14, 2036 13:31:50 GMT; path = /.
  Set-Cookie: CFTOKEN=525ea9a5badb14f2-36146ADA-DCAC-CE63-1706ADD070C8F8E1;expires=Thu,14-Aug-2036 13:31:50 GMT; path = /.
  Set-Cookie: JSESSIONID = 86308f1257484a747d6c; path = /.
  Set-Cookie: JSESSIONID = 8630627b049162583e68; path = /.
  Date: Tuesday, August 22, 2006 13:31:50 GMT
  Content-Type: text/html; Charset = UTF-8
  Connection: close
  Server: JRun Web server
  
  And this is the value of cglobal.data column:
  
  urltoken = CFID # 3499 = & CFTOKEN #= 525ea9a5badb14f2-36146ADA-DCAC-CE63-1706ADD070C8F8E1 & jsession id #= 8630627b049162583e68 #lastvisit = {ts' 2006-08-22 09:32:03 '} #timecreated = {ts ' F8E1 2006-08-2209:31:50'}#hitcount=9#cftoken=525ea9a5badb14f2-36146ADA-DCAC-CE63-1706ADD070C8 #cfid = # 3499}
  
  And the cookie JSESSIONID value is 8630627b049162583e68.
  
  Note the key change in behavior between 6.1 MX and MX 7.0.2? 6.1, even if the two Set-Cookie instructions were updated, the logic of client variable storage at least systematically used second JSESSIONID value. In 7.0.2 it appears that the first JSESSIONID value is stored in the table cglobal while the second JSESSIONID value is stored in the table cglobal.
  
  This is where the plot gets complicated still further... Even if my client variables are not returned on the following clicks through my site (he tells me I'm not connected), values for CFID/CFTOKEN/JSESSIONID are * not * re - put on each page. In fact, if I query the cglobal table directly out of my CFID/CFTOKEN, hitcount and lvisit values are actually updated!
  
  It is a major obstacle in our migration process. Can someone dig a hole into my configuration/logic and point out something I am doing wrong? The craziest part about this, for me, is the client variables which disappear even if it looks like the culprit is the JSESSIONID value. I even tried to extinguish the J2EE session variables and exactly the same problem occurs.
  
  Kind regards
  Dave.

  AAAAAAAARRRRRRRGGGGGGGHHHHHHHH! I got it!!!

  I am frustrated with Adobe right now, but I finally got inside the client variable issue. You know how the accession of ColdFusion is believed to be cumulative? Yes, well, not so much. It turns out that the CFMX 7.0.2 release is available with 3.3 DataDirect JDBC drivers. In addition, it seems that something in the client variable code between MX 6.1 and 7.0.2 regressed so that updates of the client variable under the hood has broken with all pilot pre - 3.5. Once I updated to pilots of 3.5, everything worked, including the spy feature and the variable updates the customer.

  Adobe, this must be resolved as soon as POSSIBLE. It's a huge show-stopper for site using client variables. I don't know if it is limited to Oracle because I have other RDBMS platforms to test against, but is a big problem. The difficulty here is update installation programs that are downloadable from your site with 3.5 drivers * and * update 7.0.2 Release notes note that the game 3.5 driver isn't in any downloaded bits before every time that you update the installation programs.

  Jochem, thank you very much for your persistence in helping me through this issue.

  Kind regards
  Dave.

• Change Vcenter DSN 2005 SQL native client for SQL 2008 native client

  Hi all.

  I tried to upgrade our Vsphere for VM Windows 5.5 to Vsphere 6.0 for Windows (latest version of January).

  The upgrade checking failed after entering the credentials of user Vcenter. The error is 'unsupported database driver.

  In fact the DSN connection uses the SQL native client 2005.90.2047. Is also on the system SQL native client 10. (Version 2009.100.2500) is installed. I think it's the SQL 2008 R2 native client.

  The SQL Vcenter database is on a remote database SQL 2008 R2 server.

  I tried to change the DSN of SQL native client 10. The service started, but I've seen lots of SQL errors in the vpxd.log. I could solve only to return to the snapshot and restore the SQL database.

  How can I change the SQL Native client to connect DSN correctly?

  Thank you very much in advance?

  Edy

  Have you removed the old DSN entry and created a new using the driver of the new (and good)? And have you checked the registry if your change reflected here (\VMware Virtualcenter\DB HKEY_LOCAL_MACHINE\SOFTWARE\VMware, Inc.)?

• Mail does not ask for new password after change

  I had to change the password for my email account based on Yahoo (sbcglobal dot) net because the hack/spam. It's the second time in 6 months, and I'm having the same problem that took place the last time. After changing the password through webmail interface for the account and which confirms that change has gone through by a disconnection and return again on webmail with the new password, I estimated that the Mail on my MacBook Air (OSX 10.11.4) app so the Mail on my 5 c iPhone iOS app are still happier never to communicate with Yahoo Server , sending and receiving mail, despite never forces me to put the new password.

  This is obviously less annoying than the problem where Mail asks password constantly, it should not all too obviously work in this way. If one of these devices were lost or stolen, I know now that I could not get this email account by changing the password. Apple support tell me that deleting and then reinstalling the account in Mail should solve this problem, but *? I won't be able to do if a device is never lost/stolen. Something is clearly abnormal in the way Mail communicates with this Yahoo Server and Apple needs to fix this on their end!

  OK, I'm a monumental fool, apparently, but so are at least half a dozen Apple Support "geniuses."

  I have iCloud active keychain. Therefore, this behavior is expected. Keychain passes the new password information to both the MacBook and the iPhone instantly after that I changed it on the MacBook via the webmail interface. No Mail app should ask for the password, because they already have through keychain.

  So I feel very stupid, but then again I am not a geek, and I'm not paid to know these things. What is their excuse? Why zero agents Support of Apple knew it was happening, or think to ask about it? Why was their first step to remove, then reconnect the account, which took me less than an hour from the last time I did, apparently unnecessarily? Honestly, one wonders if anyone knows how to do their job more.

  / end of rant

• Cannot change the passphrases for wireless network after upgrade

  Hello

  I just upgraded the firmware for my R7000 and after that (I think) it not possible to change key phrases for the parameters without wire and I cannot see what that the security is WEP WPA etc.

  A few ideas...?

  Best regards Thomas

  Reset the default router and reconfigure from scratch.

• After changing Windows 8.1 for Windows 10 my photoshop 6 is not working properly: layers styles cannot be applied to the objects in the layer

  After changing Windows 8.1 for Windows 10 my photoshop 6 working properly: layer styles can be applied to the object in the layer.

  Thanks much for the reply, thank you very much more useful.

  The letter appears to be part of the layer - not an object separate pixelated. One thing you could do is make a layer duplicated, select the letter and make a layer of the mask. Then you could add a style to the copy, and the rest of the initial layer will be hidden.

• Hi, when I buy an annual service by my credit card, after the first month, for the next can I change the credit card?

  Hi, when I buy an annual service by my credit card, after the first month, for the next can I change the credit card?

  Hello

  You can change the billing information anytime before the next renewal. Please see the link below on how to update the billing information.

  Manage your creative cloud membership

  Hope this will help you.

  Kind regards

  Hervé Khare

• Weak signal after changing for Z3

  Hello

  I noticed that my signal to the SIM 2 location is low after changing to the Z3. My previous phone was fine.

  Can you advise if there are parameters that I can do?

  Thank you

  Macrox

  You should try to contact the Support of Sony Xperia.
  http://support.sonymobile.com/global-en/contactus/