Can U help me to connect a lexmark Z2420 printer after changing the Charter for att inet & router?

Similar Questions

• Unable to connect to my wireless printer after changing my internet router

  I recently had an upgrade of the router and the printer now appears offline. The new router has a different password but I don't know how to change the settings of the printer so that the printer to access the new network.

  Please notify

  Hello

  Please follow the steps below.

  (1) reset default networks by selecting settings > wireless Menu > restore defaults

  (2) turning on wireless on the Printer Setup Menu > Wirless Menu > Wireless > on

  (3) If Windows click Start > HP > printer name > Setup printer > new window opens, select Connect a new printer and follow the instructions on the screen

• OAM11.1.1.5 - Dual fast connection after changing the system for OID store

  Hi all
  
  I could miss an important step probably, when configuring the OID as system store.
  I'm a double prompt to connect to the admin console.
  Please let me know if anyone has experienced this before.
  
  Concerning
  Vicky

  Hi Vicky,

  Yes, it happens, but if you add OID as a supplier for Weblogic authentication, then you should be at a single command prompt. I'm sure that there is a Note about it on MOS, but I can't find at the moment, the main steps are:

  -Log in to the WLS/console
  -go into Security Realms/myralm
  -Add your ldap as an authentication provider instance and set it to OPTIONAL (and the default provider for SUFFICIENT)

  These steps are necessary because /oamconsole use some of the features provided by the underlying WLS console - resources on WebGates, you won't see the double prompt if you perform the steps above.

  Kind regards
  Colin

• Connection to Publisher error when I change the password for the RPD

  Jin
  I am also facing the problem, when I connect on bipublisher
  "The server cannot be used because of a configuration error, please contact the administrator. If you are the administrator, see the BI Publisher user guide for the correct configuration"
  
  With "details of the error" playback: oracle.apps.xdo.security.ValidateException
  
  my password of the RPD is SADMIN and bi publisher SADMIN password
  
  I have configured the ibots his works very well. Here is my xmlp-server-config file. XML
  
  + <? XML version = "1.0" encoding = "UTF-8" standalone = 'no '? > +.
  + < xmlpConfig xmlns = "http://xmlns.oracle.com/oxp/xmlp" > +.
  + < property name = "SAW_SERVER" value = "RSPHLWINT01" / >.
  + < property name = "SAW_SESSION_TIMEOUT" value = "90" / > +.
  + < property name = 'DEBUG_LEVEL' value = 'exception' / > +.
  + < property name = "SAW_PORT" value = "9704" / > +.
  + < property name = "SAW_PASSWORD" value = "Administrator" / > +.
  + < property name = "SAW_PROTOCOL" value = "http" / > +.
  + < property name = "SAW_VERSION" value = "v4" / > +.
  + < property name = "SAW_USERNAME" value = "Administrator" / > +.
  + < property name = "SAW_URL_SUFFIX" value="analytics/saw.dll"/ > +.
  + < property name = "SECURITY_MODEL" value = "BI_SERVER" / >.
  + < property name = "BI_SERVER_SECURITY_DRIVER" value="oracle.bi.jdbc.AnaJdbcDriver"/ > +.
  + < property name = "BI_SERVER_SECURITY_URL" value = "jdbc:oraclebi://server:9703 /" / > +.
  + < property name = "BI_SERVER_SECURITY_ADMIN_USERNAME" value = "Administrator" / > +.
  + < property name = "BI_SERVER_SECURITY_ADMIN_PASSWORD" value = "Administrator" / > +.
  + < / xmlpConfig > +.
  
  I run the cryptotools also here is my credentialstore.xml file
  + < sawcs:credential type is "usernamePassword' alias is"bipublisheradmin"> +.
  + Administrator < sawcs:username > < / sawcs:username > +.
  + SADMIN < sawcs:password > < / sawcs:password > +.
  + < / sawcs:credential > +.
  
  Please help me...
  
  Published by: André on June 11, 2009 15:33

  Angelique HY,

  I did a procedure with a method step by step to set up BEEP.
  http://gerardnico.com/wiki/dat/BIP/configuration_bip

  You will see that you have a second paragraph "" access to the Admin tab' "who speaks of how do to be able to access the Admin of the BEEP page.
  Then just follow the article.

  You also at the end, any reference material if you want more details.

  Success
  Nico

• BlackBerry smartphones can not send but can receive after changing the password for AOL

  Need to change password on AOL.  Able to receive emails, but cannot send!  Can send other accounts of e-mail on the BB.  No BES

  Thanks for the suggestions.  In the meantime, I actually did all those who, believe it or not.  Things seem to be resolved, but will keep these instructions in case of future problems.

• Can someone help me create a script to repeat to simply open the dialog box to create a link?

  Can someone help me create a script to repeat to simply open the dialog box to create a link?

  the "Connect" command uses the same dialog box as the command to "Place", except for the option "Replace" verified... so, use Ctrl + Shift + P to bring up the place dialog box, select your new image and select the checkbox "replace".

  If check 'Replace' with the mouse slow you down, after you have selected your image, the tab key 'press' 3 times to change the focus, and then press the SPACEBAR to check it out, then ok to place.

• Can anyone help please? I think of web page has changed all of a sudden. Everything is listed on the left side of the screen and appears to be in a basic format.

  Can anyone help please? I think of web page has changed all of a sudden. Everything is listed on the left side of the screen and appears to be in a basic format. I run XP and use Firefox 9.0.1.
  Thank you...

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode

• Can someone help me? I have a dell windows vista and the cd/dvd drive won't work correctly. Whenever I have insert a cd/dvd, it takes forever to read, and it ejects itself. Why?

  Can someone help me? I have a dell windows vista and the cd/dvd drive won't work correctly. Whenever I have insert a cd/dvd, it takes forever to read, and it ejects itself. Why?

  Hello

  Detect and automatically fix problems of CD/DVD
  http://support.Dell.com/support/topics/global.aspx/support/DSN/document?c=us&l=en&s=Gen&docid=56A1F87CD8895B0EE040AE0AB7E15FFC

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• HP Deskjet 1000 printer - just changed the black cartridge for the first time and now it will only print first half of the page. Can anyone help

  HP Deskjet 1000 printer - just changed the black cartridge for the first time and now it will only print first half of the page.  Can anyone help

  Hello Gloria,.

  I ask you to execute methods in the following link and check if the problem is resolved.

  Solve printer problems

  You can also contact the manufacturer to find out how to clean the print head.

  http://h10025.www1.HP.com/ewfrf/wc/siteHome?cc=us&LC=en

  Please get back to us with the State of the question.

• Internet connection is slow after changing the MAC address

  * Original title: win7... problems with internet after changing the WIRELESS card MAC address

  I have win7 home ed... .i tried to change my WIFI MAC address of the card (I had a reason to do so), SMAC program change but I could not, the address remained the same... I changed my mind... has decided to forget about this topic... but unfortunately, I had a big problem (very probably)... the internet connection is too slow or stop a few times pages load too slowly or especially do not charge. downloads are always stop in network on Chrome error... I tried a different browser to check, but the problem exists with all explorers, it's big terrible trouble please help me (Note: this problem is related to some how with internet traffic... late night speed is much better, but not 100%... but of course not as speed) ", I had before changing to MAC)... Thank you very much

  Hello

  1. what made you want to change the MAC address?

  2. what exactly happens while you are trying to connect to the internet?

  3. you receive an error code or error message? If Yes, what is the full error message?

  4 have you checked the issue in internet explore as well?

  Please follow the steps below and we update with the results.

  Method 1: Run the network troubleshooter, and check.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  Please try following the steps provided in the article and check out them.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  For more information, see the articles and check out them.

  10 tips to help improve your wireless network

  http://www.Microsoft.com/athome/Setup/wirelesstips.aspx#fBid=hq7zl63PiZ9

  Why is my Internet connection so slow?

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slow

   

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Let us know if it helps!

• Unable to connect to APEX after changing the IP address of the server

  Hello
  
  After changing the IP address of my DB server, my DB works perfectly.
  However, I can connect only to APEX locally using localhost in the URL. I can not connect to APEX of remote machines, although I can connect to the DB of remote machines using SQL Developer very well.
  
  Do I need to make changes to the gateway PL/SQL embedded, that I use to connect to the APEX? How can I do?
  
  Thank you very much
  Best,
  Peter

  Hi Peter,.
  >
  After changing the IP address of my DB server, my DB works perfectly.
  However, I can connect only to APEX locally using localhost in the URL. I can not connect to APEX of remote machines, although I can connect to the DB of remote machines using SQL Developer very well.

  Do I need to make changes to the gateway PL/SQL embedded, that I use to connect to the APEX? How can I do?
  >
  With EPG, you don't need to make any configuration changes, you have to work on the new IP/hostname.

  You could try running the following just in case wherever it may help, as SYSDBA

  SQL> EXEC DBMS_XDB.setlistenerlocalaccess(FALSE);
  SQL>COMMIT;
  

  See you soon,.

• How can I change the pixels for photos on the iphone 6? IOS 9.1

  How can I change the pixel for photo taken on my iphone 6? 9.1 IOS I opened the camera and there only HDR power...  Help, please!

  You do not change the pixel setting.

• My Wi - Fi Protected Setup Wizard connection dialog box in the Intel PROSet /Wireless connection utility won't let me get caught in the password for my BigPond router.

  Dialog box of connection Wi - Fi Protected Setup Wizard in the Intel PROSet /Wireless connection utility

  My Wi - Fi Protected Setup Wizard connection dialog box in the Intel PROSet /Wireless connection utility won't let me get caught in the password for my BigPond router. He let me just plug in numbers not letters. Can someone tell me how to work around this problem?

  Hello

  This can happen if the configuration of the router is configured to accept the password in numbers. You can get in touch with Bigpond support for more information on this.

  Technical assistance to BigPond

• Vista always forces me to change the password for the connection

  I know that Vista is old, but we have an old computer that works yet that we allow our children to use. Periodically, we have to change the password for the connection. Is there a way I can stop this?

  I know that Vista is old, but we have an old computer that works yet that we allow our children to use. Periodically, we have to change the password for the connection. Is there a way I can stop this?

  See:
  http://www.howtogeek.com/HOWTO/Windows-Vista/why-does-my-password-expire-in-Windows/

• Printer problem - after changing the cartridge, I get a message that the USB cable is not connected

  As above. I checked the USB port and it is connected.

  Original title: printer problem. After changing the cartridge, I get a message that the USB cable is not connected?

  Hello

  1. you receive an error message/code when you try to print?

  2. What is the serial number and model of the printer?
   
  Follow the steps.
   
  Method 1
  Run the hardware and devices Troubleshooter
  This utility checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Also run convenience store Print that would help us diagnose the problem better
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2

  (a) check the physical connection of the printer and make sure that the USB cable is properly plugged.

  (b) connect the printer to a different USB port and check if it helps.

  (c) check the on another computer.

  Method 3

  Run the fix - it tool from the link.

  Diagnose and automatically fix problems printing and printer http://support.Microsoft.com/mats/printing_problems/

  Method 4
  If the previous step fails, follow the steps described in the following link:
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
   
   
  Let us know if it helps.