After ESXi 4 installed, BIOS goes straight to the "no OS installed"

Similar Questions

• Firefox crashes on startup - going straight to the Crash Reporter

  Firefox started crashing on startup today ' hui - goes directly to the Crash Reporter. Does not correctly send the accident report. Firefox in safe mode does not help. Tried to uninstall followed by clean install, no change. Tried to clean the installation of an earlier version 41, 0 - no change.

  Just before what happened got an opinion on Norton Toolbar, and I chose not to activate it.

  Have also tried to turn Norton turned off before reinstalling - no change. Also said Norton to ignore xul.dll, which sometimes he puts in quarantine during updates (detection of false suspects cloud 9).

  The later saved report of June so probably isn't relevant. Here's what the Crash report attempts to send:

  AvailablePageFile: 3647537152
  AvailablePhysicalMemory: 916017152
  AvailableVirtualMemory: 2042167296
  BlockedDllList:
  BlocklistInitFailed: 1
  BreakpadReserveAddress: 268566528
  BreakpadReserveSize: 67108864
  BuildID: 20150917150946
  CrashTime: 1443810798
  E-mail: [email protected]
  InstallTime: 1442945265
  ProductID: {ec8030f7-c20a-464f-9b0e-13a3a9e97384}
  ProductName: Firefox
  ReleaseChannel: press release
  Safe mode: 0
  SecondsSinceLastCrash: 472
  StartupTime: 1443810797
  SystemMemoryUsePercentage: 57
  Ramjet: 1
  TotalPageFile: 5206085632
  TotalPhysicalMemory: 2146148352
  TotalVirtualMemory: 2147352576
  URL:
  User32BeforeBlocklist: 1
  Seller: Mozilla
  Version: 41.0

  This report also contains technical information about the State of the application when it crashed.

  Hmm, Yes, incident reports are old now.

  As long as I can guess, I note something that is coming a lot lately: If you use Norton Security software, it seems to be a serious boot problem crash if you also have a program called Freecorder from Applian Technologies. If you find Freecorder in your Start menu > all programs or in your control panel, uninstall a program, and it is not crucial to keep it, please try to delete it. You have to maybe stop and restart Windows to make sure that it is completely disabled.

• When I open a new tab, it goes straight to the Bing, rather than the white page.

  I recently downloaded a program called PDFlite to view the PDF files. He seems to have changed some settings on my Firefox, I does not allow to do so. I am today and there was a Bing toolbar, which I disabled it without problem. But now when I open a new tab, it goes directly into the Bing search engine, rather than the blank page where it used to go. This turn off the coast. I hate Bing. I checked my addons and there is no new addons added by the program. I can't understand what is happening. Help, please!

  Restore the default home page

  • https://support.Mozilla.com/en-us/KB/how%20To%20set%20The%20home%20page#w_restore-the-default-home-page

  Check and tell if its working.

• My iphone 6 goes straight to the messages when it is called

  Why my iPhone 6 9.3.1 IOS go to messages when it is called? It does not ring.

  Looks that you disturb not turned on... Check it. If you do not, contact your operator.

• Satellite A100 beeps at startup and goes straight to the mode without boot failure

  When I turn on my A100 there is a beep and I'll striaght on-screen 'safe start mode.
  I can then load normally in windows XP and everything is OK. Is something missing?

  The computer is less than two years.

  See you soon
  John

  Hello

  > 'safe start mode.
  Do you mean that your Windows operating system starts only in safe mode?

  If yes then it might be something wrong with the system files or the registry.
  How do you reinstall the operating system on your laptop? Is it 2 years ago?
  Eventually it s time for a new OS update?  :|

  If you the problem is only with the software, then a new recovery would solve the problem.

  Good luck my friend

• Power monitor light goes straight to the yellow

  I hope someone can help. They gave me an installer of the Dell of my work for domestic use. When I plugged it the led battery monitor turns green for a brief second and then to yellow which I 'think '? Is the energy saving mode. When he took part in the work it worked very well. Any suggestions?

  Thank you for responding. I discovered today at work that someone had erased or deleted from the hard drive. Even the person who gave me the Setup at home. Nice. Again, thank you for responding.

• Mail that is to be received in my Inbox goes right in the trash.

  This has only started recently. Mail that I would like to receive and have normally received in my Inbox, all of a sudden started going straight in the trash. This only happens to some of my incoming mail. The selection of the mail that goes to the trash seems random. There is no filter to block or move all of the senders of these emails. Why is that happening and how can I get that back to normal?

  If I remove TB to reinstall it later, I would lose my saved messages, addresses and all I have on it?

  I use a PC under Win. 7 SP1.
  Thanks for your response!
  Taruno

• 7th generation... Please stop going automatically to the next song

  I'm angry that my Nano will not stop after each song.  It goes automatically into the next song.

  I realize account how this can be a good thing, but it would be convenient to be able to turn that off if you want.

  After some research, I don't know if this little machine is able to do this.

  In a nutshell: is there a way to allow the Nano to automatically stop at the end of each song?  Anyone?  Anyone?  Thank you.

  There is no setting for this on an iPod nano (and I don't know how to do on an iPhone either).  (Almost) everyone wants the next song on the list to play automatically.  You can create a playlist with only a song about it and synchronize with the iPod.  Then, when you play the song from the playlist (with the settings repeat off), the iPod stops playing after playing this song.

• Tecra S11 BSOD after trying to install BIOS v3.1

  Tecra S11 BSOD after trying to install BIOS v3.1

  I have reinstalled all utility fingerprint successfully. After that I tried to install the new BIOS v3.1, but I got the BSOD
  Win 7 pro
  Where can I find the minidump to see what file that are the problem?

  C/windows/minidump folder is empty.

  Hello

  Do you get the BSOD during the BIOS update procedure?
  Are you using the Windows operating system preinstalled Toshiba? or did you install your own system?

  If you have installed your system, then you should check that the VAP is installed as well.

  Also, I found this info about the update to the BIOS:

  + Attention! +

  + Please close all applications before running the update. +

  + At the end of this process, the computer will be restarted in order to update the EC. +
  + While updating the CE, the screen will not appear and the power LED etc can blink. +
  + The computer may restart several times. There is no abnormal behavior. +
  + Please wait until the computer is restarted fully. +

• I have cs5 and it was working fine and now he keeps asking the serial number even after that I put it and gives it the green check mark then it goes straight to that now

  I have cs5 and it worked very well and now he keeps asking serial number, even though I put it and gives the green check mark then it goes straight to that now or it just goes to the license agreement and when I accept it is going t - he once again.  I have uninstalled completely and then reinstalled several times and still the same thing.

  Csingleton11,

  WIN8 is not listed as an operating system that can run CS5 (see technical specifications); However, some users were able to run it in compatibility mode with success. See this link if you want to give that a try: CS5 installation on Windows 8

  Guinot

• Stuck in a loop of reboot computer after vista SP2 installed

  I installed the vista SP2 update earlier today, I was invited to reboot for updates could continue. When the computer starts up after windows loading screen (before the login screen appears), it says updated 1 filled with 3 but then there was an error in the installation and say he was restoring the previous settings and wait. less than a second to load the login screen steady after the previous settings have been restored, stop starting the computer. When loading to the top, it says 'error in the installation of update, restore the previous settings', then as soon as he finished and goes to the login screen it a new past in stopping and restarting. This continues constantly. If someone had a similar problem or have any ideas? When I tried to load the previous settings of windows recovery, he says there is no image to use.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  See you soon.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work, try to make a Bootable ERD to do a Startup Repair:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  As your grave in the category above, download the ISO on the provided link and do a repair of the disc.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• HP Pavilion ze4900: blue screen of death after trying to install Windows on Pavilion ze4900?

  After the death of my hard drive in my Pavilion ze4900, I replaced it with another hard drive for laptop, I had laying around.

  I also tried to install Windows XP Home from a Windows installation CD, the same OS, the laptop had before the hard drive died.

  Everything is going well until the laptop has been made all the installation files, instead of giving me the opportunity to install Windows or repair Windows, the laptop will eventually show me a blue screen with the message:

  "A problem has been detected and windows has shut down to prevent damage to your computer.

  What can I do to fix this? I installed Windows XP on another computer using the same CD, so the CD disappeared not corrupted and replacing the hard drive is hardly used.

  Any help would be greatly appreciated!

  @zenvo2015,

  Hello and thanks for the display on the HP support forums.  The first thing you want to check is if there are any problems with the hard drive that you put in.  Run BIOS diagnostics for the drive and the equipment to make sure that there is no problem.

  Laptops HP - diagnostic system (F2)

  And.

  HP Notebook PC - test a hard drive from BIOS

  Please let me know how things are going.

  Thanks again for posting and have a great day.

• When I turn on my laptop it goes straight to no bootable device insert boot disk which I do not have?

  When I turn on my laptop it goes straight to screen blk which then no bootable device - insert floppy to start IE, which I did not

  You burn your set of recovery disks? If so start with them. No recovery set > Contact HP to order a set for a small fee.

  You can enter the BIOS by tapping /holding F10 key immediately after turning the power on and use Diagnostics to test your hard drive.

• Can NOT see the data store after ESXi update host?

  Hi all

  We use the host ESXi 3.5 on DELL PE 2850 with RAID 5 local storage.  Today, I ran utility update for the host VMware and firmware updated BIOS and RAID on the host computer before a restart of the system.  After the reboot, the system correctly loads the operating system and when I check for storage, the data (with critical VM) store is missing.  Can not see that again.

  Please help me to recover my data with the virtual machines in her store.

  Thank you

  Nadine

  ESXi is installed on the same Partition RAID 5, which is located in the VMFS data store? for example. do you know that the partition is still intact?

  According to what the RAID firmware upgrade has done, it is possible that you may need to set the LVM. EnableResignature option 1 if the score ended with a new UUID.

  -ben

• Qosmio F60-100 - after that upgrade RAM screen goes black

  Hello world
  I upgrade my RAM a g-skill 2 * 4 GB 1066 Mhz DDR3
  I have a Qosmio F60-100
  I am on Windows 7 pro N
  I checked whether they have updated bios (the toshiba soft explain to me, that there is not an update available)
  I checked if the RAM were compatible with my laptop (these have been suggested to me)

  When I put the new RAM in the laptop, in "Starting Windows", the screen goes black and the fan works hard.
  So I'm not able to install my new RAM.

  These ram are compatible with my laptop?
  What is the problem?

  Thanks so much for all those who can help you.

  PS: English is not my mother tongue, sorry about that...

  Hello

  According to your Qosmio notebook specifications can be improved up to 8 GB. The comparable memory modules are:
  2 GB DDR3-1066-PA3676U-1M2G
  4 GB DDR3-1066-PA3677U-1M4G

  I don't know that references your RAM modules but the behavior described is probably as a result of the use of non compatible modules.