Qosmio F60-100 - after that upgrade RAM screen goes black

Similar Questions

• After that start monitor/screen becomes black with visible vertical lines

  After that start monitor/screen becomes black with visible vertical lines. Move the mouse shows an activity going on behind the disorder. My son says video card?

  Hi Melissa,

  ·         Since when are you facing this problem?

  ·         Have you checked the issue by connecting a different monitor?

  Step 1: It seems to be a hardware issue to me. Check if the cables are well connected.

  Step 2: Connect another monitor to the computer and see if the problem persists.

• After some time, my screen goes black have to re boot. It is only on I pc the other pc on the same monitor works okay my video card is on the card mother all ansawers would help t / you rkfjr

  After some time, my monitor goes black have to re start at 5 min to 2 h said mge device is grapish until this day.   It is only on I pc the other pc on the same monitor works okay my video card is on the card mother all ansawers would help t / you rkfjr XP HP pc 1.3 gh 512 ram 120g hd

  Assuming that the integrated graphics controller is OK, try the following:

  Launch a command (as a Runas administrator) window and enter the following commands in it:

  powercfg-h off

  powercfg/change-standby-timeout-ac 1440

  The first command turns off "Feature of putting into hibernation"

  The second command replaces the timeout stansby 24 hours when the system is connected to AC power.

  (The number is in minutes).

  Good luck.

• HP 2000 laptop screen goes black after entering the password

  After I enter password screen goes black

  Ok. I'm in the menu boot options. I have Manager ser of the OS startup. ERIC file boot. It says press F10 for BIOS Setup options, ESC to get out. What should I do?

• NB100 - screen goes black afater 5 min of use

  Hello
  I have a laptop NB100 with a very strange problem. I start the laptop and start to work, no problem.
  But after 5 minutes, the screen goes black and the only thing that is possible is to turn off the laptop.

  After that I start it again, but all black stays and you can't do anything with the laptop.
  The lights of the battery, wifi and power led are lit, but that's all.

  Even weirder: I first let it run the laptop battery empty.
  When it's empty, and AC power is connected, that the laptop turns on again, but once again only for 5 minutes and all the rest, described above.

  The laptop is used only 1 week before this problem occurred, but was bad enough bought more then a year ago, so not more than guaranteed (or what you thought: s)

  So I really hope someone can help me here!

  Thank you in advance!

  Best regards, Steve.

  Hello

  I had a similar problem with my laptop Toshiba-No.
  The problem was related to a graphics card driver
  I have no idea why this has happened but after driver graphics display card worked properly no black outputs plus

  I think you should check the graphics chip and should update the graphics driver
  I recommend to use the driver from the Intel page if you have an Intel GPU
  Page Intel drivers are newer

  In addition, you should check if the BIOS is up to date
  If a newer BIOS is available, check if you can update this

• Windows Live Mail using my screen goes black

  I use Windows Live Mail. But after a while, my screen goes BLACK

  These symptoms are probably caused by your graphics card. Have you checked for the updated drivers on the website of the manufacturer of the computer? Or the Web site of the company that produced your graphics card? Some video card manufacturers have been slow to release new drivers who play well with use of hardware acceleration WLMail.

  Windows Live Mail has its own support at the Windows Live Solution Centerforums. Please address any other question you may have on one of the forums on the right side of this page. You are probably asked to give your version of WLMail and Windows so that the answer may be more accurate. In WLMail to find your version of the software, a press on ALT - H. If it doesn't show you the version and the build number, press on escape to two times, and then Alt - F B.
  Noel

• Re: Qosmio F60 - 100 Blue-ray will not start film or same menu

  Hey guys!

  My Toshiba Qosmio F60-100 works perfectly. He has just blu ray player that is causing problems, because whenever I put a Blu - ray drive, it starts the program "Win DVDBD" but never starts playing the movie or even the menu.

  I don't know how I can solve this problem.
  I tried already with the famous update, but when I try to install it, I get a message that the update is not for my computer.

  Thanks in advance for your help.

  Volki

  Hello

  Have you tested different Blue-ray discs?

  I got this Toshiba FAQ
  + Some Blu - ray discs are going to have problems when played on the models of "WinDVD BD for Toshiba" version 8 +.
  http://APS2.toshiba-tro.de/KB0/TSB0402V40000R01.htm

  Check it!

• My screen goes black after a short so that after starting my laptop. I plugged an additional screen now to be able to use my laptop, but the laptop screen keeps turning black shortly after. How can I fix it?

  My screen goes black after a short so that after starting my laptop. I plugged an additional screen now to be able to use my laptop, but the laptop screen keeps turning black shortly after. How can I fix it?

  Hello

  I'm sorry to say this, but it points to a UPS of material about to fail.

  You will need to bring the laptop to get it replaced.

  Slan go foill, Paul

• Pavilion 11 x 360: my screen goes black for a while after plugging my charger

  After upgrading to Windows 10 whenever I insert my charger the screen goes black for a few seconds and comes back again, and the system takes a long time to start with a black screen before the lock screen... Please help... his frustration

  Hello

  I found this microsoft article that covers some common troubleshooting steps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-performance/black-screen-when-charger-is-plugged/a96fdb19-4745-4513-b889-c6cfd34413d8

  You can also check to see if your computer has switchable graphics. Here's another thread that might help with this question - http://h30434.www3.hp.com/t5/Notebook-Display-and-Video/Switchable-Graphics-Cards-on-Windows-10-8-1-8/td-p/5161345

  I hope this helps!

• My screen goes black and the start menu does not load after start up logo and the only thing on the screen I see is my mouse pointer

  My screen goes black and the start menu does not load after start up logo and the only thing on the screen I see is my mouse pointer

  Hello

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you do not have your system disks
  manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (to do the system restore there only to)
  being bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - type no parenthesis)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• HP ProBook s 4540: the screen goes black after the mode "Eve"

  Hello!

  My computer works fine but there is a problem, when I do not use it for a few hours or maybe an hour my screen goes black and it is nothing to do, but closed and then turn it back on.

  I have disabled all parameters almostly, screenshots here:

  #1- http://i.imgur.com/zelMPLD.png

  #2- http://i.imgur.com/FJNyLzi.png

  I don't know what to do, I think it goes to sleep after a certain time and then he don't wake up, I need to remove the battery and then turn again, he started arrive about 2 days ago when I updated my radeon HD7650 to 15.11.1 Crimson video card driver or sth.

  Hello

  Try disabling the startup of Windows 10 hybrid - you can do the following.

  Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, close all open windows, and then restart the laptop.

  Kind regards

  DP - K

• At the beginning; After the Windows Logo at the start, the screen goes black and a POWER SAVE MODE comes up. I must stop button. I can run the computer as I am now in Mode safe mode with networking.

  When I turn on the computer of gateway, the machine starts and the initial window logo starts and runs for about five seconds.  Then the screen goes black instead of blue and stays black for about 10 seconds.  A 'Power SAVE MODE' appears.  The machine is dead to all orders.  I have to stop by pressing the off button.  I can turn back and the F10 key to get in Mode safe mode with networking.

  I tried to reinstall Windows XP original but it would erase my files.  I tried to restore the last good configuration also knowledge.  That did not work.

  The change came after a Windsows update.  I have McAfee security and I asked Windows but could not use due ot a conflict. -C' is all this bad start.  Clues?  I use Negear.  No change when I hooked directly either.

  Botton line, I can run in SafeMode with networking; but it is slow and I can't make alll I have to do.  What does not load Windows?

  http://wiki.answers.com/Q/How_to_get_out_of_power_save_mode_when_computer_screen_is_black

• Screen goes black after the log on screen and works fine in safe mode.

  Original title: black screen.

  dv65 Pavilion my laptop starts up, but the screen goes black after the log on screen, judging by its instllation it works, but not the screen. It works very well in SafeMode so. Laptop is 3-4 years. I tried to connect it to my TV but she copy behavior laptop screen. Because of this problem, I had to return to the State of the plant 3 times this month. Plese help!

  Hi Avint,

  Glad to know that you were able to resolve the issue and thank you for sharing information.

• * Media Player stops. My drive stops, then recovers itself after a few seconds. Screen goes black for 1-3 seconds, BUT Audio continues!

  I have Vista Ultimate, but I'm not very smart PC!   When I try to watch a video clip, etc., SEE above EDIT.  My drive stops, then recovers itself after a few seconds.  Screen goes black for 1-3 seconds, BUT Audio continues!  Then Visual back for a while until that the same thing never happens again anywhere!  Also the FAN spins-up like a jet plane taking off!   Help, please.  Thank you.

  Hi Peter,.

  1 have had any changes made on the computer before the show?

  2. which media player you use to play the video?

  3. the problem occurs on all the video clips?

  I would say as update you the video card drivers and check if the problem persists:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  If the problem is not resolved, please respond with more information to help you best.

  Thank you.

• After I Log In, the screen goes black.

  After that I have enter my password and click on enter, it says welcome with the thing to load next to him. Then that disappears and the screen goes black and all I can see is the pointer. Sometimes the bar on the bottom with start on it, is also displayed. Any suggestions on what to do? It works fine when I run it in safe mode.

  original title: after I Log In, the screen goes black. Help me!!!

  Hi Kooper93,

  You can also try theclean boot to see if this is due to a program/process.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.