After installing K2502898 on xp media center, the computer won't save increased demand for disk space with 100 GB of backup hard disk - what to do?
My xp media center has worked very well for years, but since installing K2502898 on March 9, 2011, although there is spare 50 GB on drive C and spare 50 GB on drive D, record space fell to less than 30 minutes, and although I can increase the amount of space available to save , on the two disks and click 'Save', it is not 'save' even on reset, and I can't work out what to do. I tried to re-creation of the installation of Media Center, but when the wizard reaches the last window to close and save I get 'critical error' and it hangs. It was fine on March 8, 2011 before the automatic updates have been installed.
Can someone, please (I don't have disks set-up, just to anticipate "Please insert your boot disk...) »)
MS Windows XP Media Center Edition SP3 32-bit professional
CENTRAL PROCESSING UNIT
Intel Core Duo T2300E
Carrots 2
NET 2
Name Intel Core Duo T2300E
The Socket 479 mPGA package
65nm technology
Specification of the Genuine Intel(r) CPU T2300 at 1.66 GHz
Partition 0
Disk #0 Partition #0 partition ID
Size GB 6.90
Partition 1
Disk #0 Partition #1 partition ID
C: drive letter
NTFS file system
Size 113 GB
Used 56 GB of space (50%)
Free space GB 57 (50%)
Partition 2
Disk #0 Partition #2 partition ID
Letter from D: drive
NTFS file system
Size 113 GB
Used space 62 GB (56%)
Area 51 GB (44%)
Memory
Type DDR2
Size 2048 MB
Channels # double
Frequency 266,0 MHz DRAM
CASE # latency (CL) 4 clocks
# For CASE # Delay (tRCD) RAS 4 clocks
RAS # Precharge (tRP) 4 clocks
Cycle Time (tRAS) 12 clocks
(TRC) Bank Cycle time 16 clocks
Physical memory
59% memory usage
Total physical 1.99 GB
Physical layout 815 MB
Total virtual 1.99 GB
GB available virtual 1.86
Finally fixed on my computer after using http://blogs.msdn.com/b/astebner/archive/2008/08/28/8904493.aspx and then reinstall using http://blogs.msdn.com/b/astebner/archive/2008/08/28/8904493.aspx starting by 3, 5 (in English) not with 4 (which is the first proposal on the list) - feel a little like jean pierre coffe - it's crap!
Tags: Windows
Similar Questions
-
After loading xp sp3 on Media Center windows restarts then bsd * stop: 0x000007E (0 x 0000005, 0xBA268756, 0xBA4C33430, 0xBA4C312C)
Hi Rick Amsbury,
Follow the steps in the article.
-
What is picassoaddin - opportunity, that I sign in the windows media center, I receive one doesn't sstart message for picassoaddin?
It turns out that the problem could be due to some pre-installed software. The Picasso snap steals the focus from Media Center at the session of the Extender is launched and so instead of the remote control Media Center, he tries to control Picasso (which is not visible). So by pressing the green button should bring Media Center at the forefront and work around the problem.
A more permanent solution is to remove the Picasso-> General-> program library Options-> edit program library and uncheck Picasso and the snap-snap front. Then restart the session of the Extender.
-
Qosmio x 500 and media center - the arrow of the mouse disappears
At the opening of media center the arrow of the mouse disappears and makes it impossible to use the library, my computer is only a few weeks old and everything else works fine
Can anyone help?
Hello
This isn't a problem!
It is a feature of Media Center!
All features and buttons in Windows Media Center are accessible using the keyboard * only *.Check it!
http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Media-Center-keyboard-shortcutsWelcome them
-
How can I fix missing MSVCP110.dll Adobe Premiere Elements on win 10 after installed update. Impossible to correct the problem after reinstalling, deleting and reinstalling.
Hello
Please visit https://helpx.adobe.com/creative-cloud/kb/missing-msvcp110dll.html
Hope that helps!
Kind regards
Sheena
-
After installing and starting I see that the framework with a rotating Tower circuit for hours. No points for applications or any other sign.
What I've done wrong?
best regards from Ferdinand
Hi ferdinand,.
Please see the below help document to solve the problem:
Does not open App | Wheels of progress turn continuously
Kind regards
Sheena
-
Original title: zoo tycoon installation freezes computer
I try to install Zoo Tycoon 2 Ultimate Collection, the computer fine until it reaches the file binkw32.dll, then my computer crashes. I tried to install the game a couple of times, and this is what happens every time. Y at - there no fix for this, or any idea why this happens? This is the first time that the installation of this game on my computer. Any help would be amazing at this stage.
Hello
Your computer meets minimum system requirements for this game?
Try the following steps, one by one and check:
Step 1: Run the hotfix in the following article and check.
Diagnose and solve the program installation and uninstallation problems automatically
http://support.Microsoft.com/mats/Program_Install_and_UninstallStep 2: Look for the cause to the clean boot.
From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
Reference:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
1. click on start, type msconfig in the search box
2. press ENTER.The System Configuration Utility dialog box appears.
3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
4. When prompted, click on restart to restart the computer.Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.
Measures to check the application event log:
a. Click Start.
(b) in the search box type eventvwr.msc, and then on enter.
c. now, click Application in the event viewer (local).
d. now, looking for event log on the right side of the event viewer window.
http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer -
How can I configure my windows 7 after restoring my laptop to the factory conditians?
My laptop had a blue screen and I couldn't get rid of it, I went into safe mode and restore my computer to factory conditions. When the computer says "the installation program starts services" you stop and I couldn't turn it back on for 15 minutes. When I turned on and tried to contained my setup, a message keeps poping up "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install windows, click ok to restart the computer, and then restart the installation. "But no mader, how many times I reboot my laptop, the same message appears. What should I do? I've restored my computer several times and never had this problem.You should try another recovery.
New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.
If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling.
-
I stopped to receive mail after December 31. It indicates that the computer cannot connect to my account but when I log in with my password I get the message "this account already exists." How can I get my email account to work again?
MacBook Air, OS X El Capitan
First of all, make sure that you don't have two accounts with the same address. What happens if one of them is an iCloud account.
From the Mail menu bar, you select
▹ Connection Doctor window
In the window that opens, look for an SMTP (outgoing mail) account with a name that corresponds to the account that you are trying to add. Double-click it. Another window opens, displaying the list of all outgoing mail accounts. Click the sign button less to remove the corresponding one, and then click OK.
Try to add the email account again. If you still can not, log off or restart the computer, and then open the preferences window accounts Internet and check if the account is displayed.
-
Original title: print printer print
I try to analyse some documents in pdf format, which I can send an email. It works fine last night but this morning I receive a message that says make sure that the printer software is installed and that this scan on the computer is enabled via the printer software. BN
Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help -
I have a portable Gateway that will not start, but rather when I turn on the laptop, it gives me a box of caption read "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and restart the installation. I bought the recovery CD gateway and even made the recovery discs offered by Microsoft, but nothing helped. Or recovery CD were no help. I am running Windows Vista. Any suggestions?
I have a portable Gateway that will not start, but rather when I turn on the laptop, it gives me a box of caption read "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and restart the installation. I bought the recovery CD gateway and even made the recovery discs offered by Microsoft, but nothing helped. Or recovery CD were no help. I am running Windows Vista. Any suggestions?
Hey PeLon416
If you have problems with the gateway recovery process, you will need to contact Gateway
It's their recovery process not microsofts
You may have a hardware problem
support of bridge at the link below
http://support.gateway.com/support/default.aspx
Walter, the time zone traveller
-
Hello! I installed Adobe premiere pro and Creative Cloud show that the app is installed, but it is not on the computer. What should do?
You have a 64 bit system? If this isn't the case, it will not work.
-
Original title: the headphone volume
How can I activate the volume for headphones? the speaker volume in the computer sound control mixer is up and works well with the speakers, but with the headdphones that I can barely hear
Hello1. who is the operating system installed on the computer?
2. What is the brand and model of headphones?
3A this works much earlier?
4. What is the brand and model of the sound card?5. have you ever tried to play the Audio using different media player applications and check?6. have you tried to connect the headset to another computer or phone and check if it works well?I suggest you follow these methods and check.Method 1: Run the audio troubleshooter.Open the Audio http://windows.microsoft.com/en-us/windows7/Open-the-Playing-Audio-troubleshooter playing convenience storeMethod 2: Set the earpiece/microphone as default device and check.a. right click on the volume icon in the system tray at the right corner on the desktop.b. Select the playback device, go to torecording tab.c. make a right click and headphone/microphone as the default device.d. click on apply and ok.If above steps fails, proceed to method 3.Method 3: I suggest to disable the improvements and check.a. right-click on the icon "speaker" at the bottom right of the screen.b. Select "playback devices".c. right-click on the helmet.d. Select Propertiese. click improvementsf. check Disable all improvementsg. click OKYou can read this article for more information:Tips for solving common audio problems
You can also contact the manufacturer of headphones and check.I hope this helps! -
With the updated 31.4.0 version - demand for return confirmation and email send priority disappeared.
How can I access them now?Thank you!
Did? I find in the title bar of the alternatives
-
I'm trying to run the sfc/scannow command. but the computer won't let me
How to make a console session
I'm trying to run the sfc/scannow command. but the computer won't let me. He tells me that I need to be an administrator (which I am) and I have to run a session of consul?Go to start | Programs | Accessories and right click on the command prompt, and then select run as administrator. It's a console session.
Steve
Maybe you are looking for
-
is the MD656LL/A) a 5s?
It is the MD656LL/A) a 5s?
-
Can you connect a cable DB37 to block cfp-cb-1 connector?
Hi all I am looking at upgrading an existing unit of the point compact field to a unit of the cDAQ and I find a way to test the new system without having to release and rewire any old compact field point of terminal blocks to test. I would like to c
-
e2333 new android version!
Today, I get the new software update, but I want to know what's new? thanx
-
I could use a USB adapter to Ethernet to connect my Canon printer to the Wrt320n. I have two wired computers. I know that I can connect through the BONE
-
Hi all Can someone help me where I could see these properties in the rules. I am unable to find in what types of topology, I can find them Use of file system Waiting for IO Use of the IOPS / s for critical disks Disk timeout Disk Service time The dis