WRT320N printer

Similar Questions

• Printer cannot find the network

  I just bought a new printer HP Photosmart 5514.  I tried to connect to my wireless router, but he can't find it. I checked to make sure that the router was conducted, it was broadcasting the SSID and I have was close enough to receive the signal. Everything was ok, but it has always failed. I still don't see it.  (On a side note, 2 laptops can see the router and another 1 laptop can't see the router). I think I might be missing just a setting somewhere but can't find it.  Help, please!

  I have a Linksys WRT320n.

  Wireless broadband: 5 GHz
  Network mode: mixed
  The network name (SSID): wire78
  Channel width: Auto (20 & 40 MHz)
  Channel: Auto
  SSID Broadcast: enabled

  Security: WPA2 Personal with a password

  MAC filtering: disabled

  I found the error.  I needed to have the band Wireless 2.4 GHz.  Fixed both the problem of connectivity to the printer and the laptop that did not see the network.

• WRT320N laptop computer connection issues

  Hi all

  I decided to upgrade my router today to WRT320N. I connect 2 computers wired, wireless 3 computers and a printer of HP Network on a home network. I was able to get the wired machines and the printer goes very well with Windows Vista and the Linksys software. I could not connect wireless laptops. I used the Network Magic program, the Vista network program and the HP Wireless asst without success. I tried using auto detect it on the router, to connect directly from the computer to a wireless network and using the magic network programs, including manual connect and the parameters on a loading USB device and try this on the computer to connect. I'm at my wit's end! Ideas by steps out there on what to do? I rebooted the router and Comcast cable modem x 2 x 4 and all computers at least once. Thank you.

  Tom Brown

  Using Comcast surfboard Motorola Modem (phone, internet) Multi model SBV5220

  Network Magic 5.5.9195.0 - Pure0.LinksysRouterSetup Version

  Operating system is Windows Vista Home Premium w / SP1 32-bit

  Windows Firewall in use

  AVG 9.0 antivirus

  SuperAntiSpyware 4.29. 1004, core 4046 track 1986

  Router WRT320N, firmware 1.0.03 build 010, address Internet IP = 76.103.67.182

  I hope this helps.

  Hi, do you have Network Lock active?  If so, disable it, and then try to connect to your laptop.

• IP ADDRESS OF THE ROUTER WRT320N

  I recently bought the WRT320N router.  Set up was easy, I have 2
  computers (1 wired and 1 wireless). I have a wired
  printer. Recently, my son, home from College and he was able
  access my network of wirleess without any security problem.  The simple link
  Counsel has not indicated his computer while he was on the network (it
  lists the mentioned previously 2 computers and printers).  I tried
  to access the routers Set up basic web. I checked my computer and the
  The IP address is 192.168.1.1.  However, when I try to get on the web through the
  (http://192.168.1.1), I get "Internet Explorer can not display the.
  Web page.  Why is this happening? Why does my network seem to not course?

  Open a command window and type in ipconfig.  Verify that the default gateway to verify the IP address of your router is 192.168.1.1.  If this isn't the case connect you to this address and see if you can get to the admin pages.

  If it is still impossible to connect hard reset the router by pressing the reset for 30 seconds button and hold then release.  Wait 30 seconds and cycle power to the router.  Do not attempt to connect with the username password empty admin.  Reconfigure your router to your setting, then check your secruity.

• No Internet via WRT320N

  Need help.

  I use Mac OS x 10.6.5 on my MacBookPro.

  Started using WRT320N a few months ago as a wireless router for my printer, laptop and connected via an ethernet cable to a Motorola Surfboard SB5100 for internet. Everything was fine until this morning. Now, I can always connect to the network wireless BUT not able to surf Safari or Firefox.

  I've tried several things:

  a. connect the laptop directly ethernet cable and for the Motorola Surfboard. I have internet.

  b. sending PDFs to print in wireless network wireless (WRT320N). It prints very well.

  c. restart WRT320N and Motorla Surfboard and then try to access wireless. Still NO internet.

  The lamps on the WRT320N are all blue and stable.

  Can someone please advise what I can do to get the internet back again wireless through WRT320N.

  Thank you in advance.

  Let your Motorola Surfboard be connected to the router on the Internet Port and then wired your MAC computer to the Linksys router and check if you are able to access the internet on your computer or not?

  Connect to the Setup page of your router and on the tab of configuration click the sub-tab "Clone MAC address" and then activate and then click on 'Clone MAC from my PC' and click on save settings...

  Once done, now you can unplug the power to the router and modem, wait 30 seconds and then connect first to a Modem and power when all the lights are cover on your Modem and you can connect the power supply to the Linksys router. Now, you can check if you are able to go online or not.

• Network solution: cable Inter - Linsys PIX 512 - WRT320N

  My current system is:

  Inter CABLE - Linsys PIX 512 (gateway 10.1.30.1, Network10.1.0.0) - router WRT320N (gateway 10.1.30.2, network 10.13.0.0, no dhcp server)

  The two networks have Internet, both see in each network, but I'm looking for a solution (setting) to allow sharing of files and printing between two of my network 10.1.0.0 and 10.13.0.0. The wireless router for his network does not allow me to set a network from cable network address, so I put them so that they are separated. Using wireless as a switch router is not a solution, because it's not safe.

  If anyone can help in this situation?

  I don't see why it isn't safe. Wireless Security Setup and that's for sure. Then, you can use the WRT as switch and single access point without running two IP subnets. You still want to print between the two file/sharing. And the way it is implemented at the moment that everything related to the WRT can access everything connected to the PIX. So if the WRT network is not secure you already have a lot of problems.

• Router WRT320N to a wired BEFSX41 router connection problem

  Hello, I never thought it would be so difficult. I have problems to connect to a router (WRT320N) so it will be on the same network as my other cable firewall router (BEFSX41). The wireless router works fine because it connects to the internet via the BEFSX41 router. However, the two routers do not see each other and I can't connect two computers, a wired computer, the other laptop wireless to the same network.

  Wired BEFSX41 router uses 192.168.1.1 IP address and the router WRT320N wireless uses 192.168.0.1 IP address.

  Don't know what other information you need. I hope you can solve this problem for me.

  Thank you

  Mike

  For file sharing, it is always better to maintain the network in the same subnet... Connect the BEFSX41 on the Ethernet Port of the router WRT. (LAN-to-LAN connection)... Visit this link for that. If the IP address of the main router is 192.168.1.1 then, change the 2nd router's ip address is 192.168.1.2.

  Make sure that file and printer sharing is enabled... Also, make sure the computer are in the same workgroup...
  Default workgroup in Windows Vista has been renamed to WORKING group. In Windows XP, the default workgroup name is MSHOME...

• How to set up a wired LAN on a Wrt320n?

  Hello, I have a router Wrt320n, and it is connected to 2 desktops through cables of cable.

  a computer is Windows XP, and the other has Windows 7.

  Both computers receive the Internet connection and are visible to the router, but the two computers cannot interact with each other.

  Which means that we cannot share files or play multiplayer games between them.

  I would like to know how to set up a Local network for these two reasons.

  Thanks in advance.

  For sharing files between 2 calculates... Make sure that file and printer sharing is enabled... Also, make sure the computer are in the same workgroup... Default workgroup in Windows Vista has been renamed to WORKING group. In Windows XP, the default workgroup name is MSHOME...

  Also, see this link.

• Brother printer wifi "the printer is unresponsive.

  Hello

  I'm new to Mac but am generally competent computer/network.

  My son is in a the student house where 2 guys have Macbooks and 2 have Windows Mobile 10. the printer is a Brother wireless printer/scanner/fax.

  Among Mac users and Windows users can send impressions and analysis perfectly, but only one of the Mac users cannot.

  I deleted the printer and downloaded the latest drivers and re-installed but still cannot print.
  I tried adding via IP address but still does not work. I also tried the Air and BrotherCUPS, but none worked.

  HELP............!!!!!

  Greetings thequizman,

  Thank you for using communities of Apple Support. It seems that you experience problems printing to a Wi - Fi printer. Looks like you already have a troubleshooting. I recommend reading this article, you have already done some steps here, but there is more information you have not mentioned by train.
  
  

  If the issue is not resolved, take these last steps to remove all the drivers printer currently installed that might be causing the problem:

  1. Choose  menu Apple > System Preferences, and then click Printers and scanners.
  2. Control-click anywhere in the list of devices, and then choose "Reset printing system" from the context menu that appears.
  3. From the Finder, choose go > go to folder. Type /Library/Printers/ , and then click surGo.
  4. The Printers folder opens. Choose Edition > select all to select all the items in the folder.
  5. Choose file > new folder with selection to all the selected items in a new folder named new folder with the elements.
     To save storage space, you can delete the folder new folder with items after you complete the remaining steps.
  6. Follow the steps described in previous section once more.

  If your printing problem is not resolved, contact the manufacturer of the printer to support.

  Troubleshoot printer on your Mac - Apple Support

  Take care.

• print labels easy without using Contacts

  Print the sheet of labels with different addresses with Word for Mac

  Is this a question?

• Printer Driver HP LaserJet 6 p file

  I'll try to find a driver file for my HP LaserJet 6 p printer, it worked great until I upgraded to MAC OS Sierra

  Thank you for your help

  Try to configure your printer according to this instruction, the problems of printer on your Mac - Apple Support

• How to solve printing problems after update OS Sierra

  After the OS Sierra update, some of my files can not print from my printer. The message showed "internal error - an untrapped exception was raised. Choose 'continue' to continue execution in an inconsistent state. Choose 'Crash' to terminate the application and fill out a bug with Crash Reporter report. Choose 'Crash' will result in the loss of unsaved data. "Despite having chosen the above options, there is still nothing happen on the computer.

  Is there a way to fix this?

  Install a printer driver updated - check the site of the manufacturer for compatible drivers Sierra thew.

• My hp LaserJet 1022nw fails to analyze the download of the printer driver after that macOS Sierra upgraded.

  After switching to macOS Sierra, my printer (hp LaserJet 1022nw) WiFi does not print work orders, even if the printer seems to be to receive the order of work and how to complete it in the work queue.  Connect the printer to my MacBook Pro via USB, I am able to print without problem.  Other computers on the network continue to be able to print wireless.  When I connect via USB and try to scan a updated driver, download cause analysis a software fault message.  Any ideas on how I could proceed to continue to connect and use my printer wireless with the new OS?  The 1022nw is detectable as a printer available (wi - fi) and can normally be added to the list of printers, but doesn't have the print queue even thought that they seem to have been dealt with, and then disappear from the queue.

  Open System Preferences > Printers and Scanners and select the print tab.

  Then the right or control click on the printer on the left then click: reset the printing system

• I have an old imac running old 10.7.  I want to get rid of old printing software

  How can I safely get rid of old software/printer drivers?

  Visit the site for the manufacture of the printer and look for the instructions to uninstall.

• Canon MG7100 prints but will not scan after update of the iMac? How to fix?

  Canon MG7100 worked very well with the iMac - scanning and printing. After doing the updates of the iMac and installation Siri scanning does not work. Always printing. The printer/scanner Canon said - Set PC to start scanning - I have MG7100 added on the iMac. I opened (and re-locked) firewall to let in the Canon UJ utility. I deleted the all-in-one Hi - and added MG7100.

  http://support-Asia.Canon-Asia.com/contents/Asia/en/0100535401.html

  doesn't look like canon has a printer that takes in charge the newer versions of Mac OS x, if I were you I would take contact them to see if they plan on support of new versions, apple made no drivers for the hardware they don't and if hardware manufacturers does not provide a working driver head can group with the new version of Mac OS x We have to rely on manufacturing to have a download on their page