After installing new hard drive, video card or drivers are not compatible with Windows Media Center on Windows XP

Similar Questions

• your video card or drivers are not compatible with media center

  When I opened my media center theres a message "your video card or drivers are not compatible with media center" I already tried the solution Center but still cant fixed. pls help me, thanks.

  Hi butch okoy,.
   
  Try the steps listed in the section below to resolve this issue.
  You may receive an error message "your video card or drivers are not compatible with Media Center" when you start Media Center in Windows XP Media Center Edition 2005

• XP Media Center says video card or drivers are not compatible

  Original title: Hi everyone__hope you can help me___

  I have xp media center edition 2005

  with a jury of hauppauge wintv-pvr

  When I opened MCE watching television he says video card or driver is not compatible with media Center

  I can't find the driver for it

  and do not have a video card that I know

  can someone help thaks

  Thanks for the info, rabjhop.
  As I suspected, the weak link is your graphics card integrated - GMA910GL of Intel is not enough juice (nor has it required WDDM WHQL certified drivers) to properly support DirectX (or a few other things) entirely in hardware (not on Vista or Win7.)  Even the GMA950 chip had problems in Media Center (go all the way back to Media Center 2005); the minimum that worked really really - still - is the GMA x 3000.
  In other words, you need a graphics card.  But you don't have to spend a lot of money - a PCIe card decent (assuming you have a PCIe x 16 location) can be made for<>

  I have not assumed that you could pop the cover off the PC and see what (if any) you have at disposal a graphic slot, could you?
  Here's what you're looking for:
  PCI Express: http://en.wikipedia.org/wiki/File:PCIExpress.jpg see the long slots?  Those who are 16 x.  No the difference (you can tell by the location of the key in the notch) to what follows.
  AGP slot: http://en.wikipedia.org/wiki/File:AGP_slot.jpg
  In the two photos, the mount is on your left.

  Kind regards
  Chris

  MS - MVP (Media Center) [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Satellite Pro A120 - Jerky empty reading after installing new HARD drive

  Just installed a new hard drive in my Satellite Pro A120. Made a full new install Vista, installed all the drivers but video playback is choppy/jerky. Even google earth is juddery. It didn't use to be like this with the original hard drive.

  A I had a problem of driver somewhere? I think it's the 945 chipset.

  Hey Buddy,

  To be honest, it's really hard for us, users, to say what causes this problem and I think you should test more yourself

  Anyway, you have reinstalled Windows using the Toshiba Recovery disk?
  You should also check if all Windows updates are installed and if you have yellow exclamation points in Device Manager.
  For any use of video and multimedia substance High Performance plan wrote BobRock_1.

  Sorry, but I think that it s all we can say :(

• No input signal after installing new hard drive

  SUP guys, im need help, my hard drive on my computer has stopped working, I'd get an important flasher hits and it looks like it please insert a disk and when I did a diagnosis, I had hard drive errors I went and bought a new one.

  In order to take the old one out I had to remove the cables from the hard drive, the big white thing that plugs into the motherboard, the processor fan and cable.

  I put in new hard drive, put everything back as it should and when I boot it all im getting are no signal input on my screen, I have tried on 3 different screens and got the same thing.

  Here are some pictures of the inside of my computer:

  

  

  

  If you notice the VGA thing on the 2nd picture, should no more added to it? I mean in addition to plug the cable from the monitor, I have the impression that there should be something added to the back of it, I just noticed now, the computer and the screen worked perfectly before.

  It's a HP model number is a6655f, it came with vista, but after putting in the new HD, I intend to put windows 7, I have a copy of it.

  I guess with the new hard drive and I am I was right assuming that you have already installed windows 7

  Sounds like you need drivers for the drive, and sounds like a simple problem, download drivers and install I believe that when you install windows 7, it offers you the possibility of drivers installed.

  Oh and you could try to change SATA to IDE in the BIOS and see if that helps

• No sound after installing new hard drive

  I recently installed a new hard drive for windows XP and I installed all the updates of windows updates. I plugged in an Altec speaker system exactly as I did before, but I can't not all sounds.

  When I click on "Sounds and Audio devices" in the Control Panel, I see "No Audio device".

  I tried all the troubleshooting options. I think I need to download new audio drivers, but I can't figure out how to do this.

  Any help or advice would be appreciated!

  There could be a possibility that you may still need to download additional software.

   

  Perhaps, your motherboard has audio drivers available at their homesite or perhaps your sound card as well.

   

  However, if you have a brand system / pc, and then click on his homesite and look for the model number for the available downloads and updates.

   

  
  --
  DB·´¯'·.. ¸ ><)))º> --> sent via windows live mail

   

   

  "stefff05" wrote in message news: 5eb879d3-2646-4a25-8e81-286abb719b2e...

  I recently installed a new hard drive for windows XP and I installed all the updates of windows updates. I plugged in an Altec speaker system exactly as I did before, but I can't not all sounds.

  When I click on "Sounds and Audio devices" in the Control Panel, I see "No Audio device".

  I tried all the troubleshooting options. I think I need to download new audio drivers, but I can't figure out how to do this.

  Any help or advice would be appreciated!

  DB·´¯'·.. ¸ >-))) º > ·´¯'·.. ¸ >-))) º > share nirvana mann

• Problems opening Captivate 7 for Mac after installing new hard drive

  Hello!

  My HDD recently crashed and I need to install a new hard drive (OS x El Capitan, version 10.11.13) on my mac. They re-installed Adobe Captivate (I use Adobe Captivate 7 for Mac), but now the software and files that I created using the software will not open. Initially, I received an error message stating that I had to install a new version of Java, but even after I did it, it will still not open. I click on the link in the finder and it bounces on the taskbar at the bottom for one second, then disappears. I tried to restart the computer, but it does not help.

  Can anyone help? I need it immediately for work!

  Thank you, Ashley

  I suspect that the reason is the operating system. Even the Captivate 8 was not compatible with El Capitan, I doubt that is the case with CP7. Only CP9 is compatible with El Capitan.

• Bluetooth driver after installing new hard drive

  Hello:

  RE: HP Pavilion DV7 - 4270us Windows 7 64-bit

  Two weeks ago, I replaced the internal hard disk on the above referenced pc. I added slowly back the necessary drivers and software using a large HP Expert.

  (Note: I have create recovery discs when the pc was new, but for some reason, they would not install new hard disk.) This is the reason why I'm adding drivers and software available, one at a time.)

  3 questions please:

  (1) because my pc's bluetooth, I don't remember adding a bluetooth driver. How could I know?

  (2) Lightscribe software has been installed at the factory on my pc, but I have not just now. Is it possible to get that back?

  (3) reviewed the upgrade from Windows 7 to Windows 8.1, but was afraid that I wouldn't be able to find the drivers for my pc if I have upgraded. In addition, read on the forum, it seems to be quite a number of issues upgrading from Windows 7 to Windows 8. 1. What are your thoughts?

  Thank you for your help and suggestions.

  For the Bluetooth drivers:

  If you need drivers, follow these steps:
  1. in the run box, type devmgmt.msc.
  2 unknown devices would be listed as such and plotted with a yellow question mark.
  3. Select the unknown device or any other device you need of drivers and right-click to access the properties.
  4. in the Properties window, click the Details tab and select Device Instance of Id or hardware ID from the drop-down.
  5. an alphanumeric string, like this DEV_7130 & PCI\VEN_1217 & SUBSYS_012F1025 & REV_01\4 & 6B16D5B & 0 & 33F0 is the marker for the identification of the unit.
  6. Please provide this number so we can offer you the appropriate driver.

  Here is the link to the lightscribe software:

  http://download.LightScribe.com/LS/LS_Update_1.18.27.10_.exe

  Regarding Windows 8.1:

  If you are running Windows 7, you can use Windows 8.1 Upgrade Assistant to check if your programs and devices are compatible with Windows 8.1.

• Catalogue lack of LR 5.7.1 after installing new hard drive

  A few days ago I was forced to install a new hard drive on my computer because of problems. I have re-downloaded all of my programs which included Lightroom. I had a disc for Lightroom 3 and then had updated to LR 5.7.1 online. I used a link to Adobe for re - download 5.7.1.  I have an Acer running Windows 7 Home Premium 64-bit.

  Now I have 2 major problems.  There are a total of 139 images in my catalog that I guess are the catalog in LR3. They appear when I click the icon in the grid. I got about 4000 processed images so why don't others appear under all the photographs?

  The way I work is to download my camera pictures in folders on my hard drive which is now renamed F drive.  Then I pass to the ones I deal with in Lightroom. Which causes probably my second problem. When I click on set to the point that one of these images to 139, the file is not found.

  How do I find the catalog for the rest of the 4000 images and how to 'find' the images first 139?

  Thank you.

  These photos are considered to be 'missing' by Lightroom... I can say because it is an icon of exclamation point on each of the photos in the Filmstrip at the bottom. You must reconnect the photos in Lightroom by pointing to the actual location on the hard disk of this photo, or alternatively, you can log records both.

  This document explains and illustrates how to do this.

  Adobe Lightroom - find moved or missing folders and files

• recovery after installing new hard drive

  The recovery disc will reset windows on a new hard drive with the key at the back of the pc

  Yes.

• Restore itunes after installing new hard drive

  Very well. I have a HP DV2726ca the HARD drive was not. I have several external hard drives. I backed up my music folder and then just copied the contents of the folder this music in the new music folder.

  When I open iTunes I see not those exclamation points or I see a bunch of clouds. shouldn't the fact that I kept physical copies say that I wouldn't have to download anything?

  I have a "iTunes folder" and a folder named "music m4a files.

  I put all my songs inside this folder "automatically add to iTunes".

  I'm so confused. In the past, I had more easily. right now I don't have one of my playlists. I clicked on see the duplicates and there were many, some are same as triples.

  I allowed my computer again. I don't understand why I not see an exclamation mark on the left side of the song or I get a rating of icloud. not sure if there is something that needs to be downloaded to play my protected music old ones I bought 128 and require authorization for the file set.

  I had installed 10 windows but I have problems to install again on windows 7. my computer gives me several s bluescreen per day. I told someone the errors, and then he said sounds like a HARD drive problem. whenever I did the test drive HP that it would fail within a second. so I bought another 500GB which is what I had in this laptop before.

  This laptop comes with Windows Vista. I upgraded to 7 years and then updated on 29 July. It does not appear that I can install windows 10 so I just want things to normal with windows 7.

• Help with Bluetooth after installing new HARD drive

  The hard drive failed on my laptop HP Pavilion dm4 3099se Beats Edition son. I replaced the hard drive, installed and activated Windows 7 64 bit (using the key supplied with the notebook windows). I used an oem Win7 disc, not the recovery disk.  Then I installed the drivers needed to make it work again. But I can't get the Bluetooth works, even if the wifi works. Use the Intel ProSet Wifi driver but the Intel ProSet Bluetooth driver returns an error when it is installed... and Bluetooth does not appear in Device Manager.

  I installed the ProSet software also. It is also an error "can not properly installed. I have not installed the HP software (which I hope it is not necessary).

  Is there than a bluetooth radios category in Device Manager?

  If so, then the generic microsoft drivers have been installed.

  Otherwise, the device is not enabled and is not being picked up by Windows.

  If you have not installed the software of HP connection manager, and who controlled the bluetooth when you reinstalled the hard drive, you need to install this software, turn on the BT using this software and go from there.

  On some HP business notebooks computers where the wizard wireless HP (predecessor to the HP Connection Manager software) controlling the wireless and bluetooth at the same time and no device showing in Windows when I reinstalled the operating system, which has happened to me.

  After installing the Wireless Assistant software, the two aircraft were then visible and I was able to install the drivers.

• message after replacing the hard drive is. "This computer is not running genuine Windows.

  The original hard drive has been cloned, but the error occurs 2 - 3 times a day.

  I activated the windows via the phone edition and it said activation sucessvull jet message returns

  I tried to reinstall windows and after loading all software the message windows cannot run on this computer

  The system restarts and uninstall success windows and restores the original defective

  It is a HP PC comes with Windows Vista and was then upgraded to Windows 7. has run like that without problems, then the HD had to be replaced which started this problem

  Keep in mind that a clean install as it will wipe your computer, so if you don't have a backup, make a partition.

• After using Norton Ghost to clone new HARD drive, get the message «This is not a real Windows 7»

  Hi, I used Norton ghost 15 clone my old original (750 GB) to a new HDD (1 TB) hard disk, all seemed well, start in windows 7 from screen, but when he arrived at the office, there was a line saying "this is not a genuine copy of windows 7" and nothing shown on the desktop but a light blue background. I have my Win 7 DVD, but there is no way to indicate to the system on my product key.  I'm stuck on a blue screen.

  After seeing another suggestion to use MGAdiag, I created a new boot disk and it linked the diag.  The output is cryptic, so I guess that I have validated only my new installation and there is no obvious way to point to the other disk.  But the output is lower.

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-* - 2QCP3 - BQCQQ-HVY8B
  The Windows Product Key hash: fRtBOPOPT00WHeJEbwGV/OqVH6o =
  Windows product ID: 00371-177-6290927-85271
  Windows product ID type: 5
  Windows license type: retail
  The Windows OS version: 6.1.7600.2.00010100.0.0.048
  ID: {25853437-7ED8-4F60-9297-19CED5282884} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Professional
  Architecture: 0 x 00000009
  Build lab: 7600.win7_rtm. 090713 1255
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Internet Explorer\iexplore.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0 x 80070003]
  [File mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0 x 80070003]
  [File mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0 x 80070003]
  [File mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0 x 80070003]

  Other data-->
  Office details: {25853437-7ED8-4F60-9297-19CED5282884}1.9.0027.06.1.7600.2.00010100.0.0.048x 64*-*-*-*-HVY8B5S-1-5-21-2774350695-836626266-3624229488the system manufacturer,System Product NameAmerican Megatrends Inc. 00371-177-6290927-85271 1208 20100730000000.000000 + 000E3BA3607018400FE04090409Time(GMT-08:00) Standard Pacific03109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7600.16385

  Name: Windows 7 Professional edition
  Description: operating system Windows - Windows (r) 7, retail channel
  Activation ID: e838d943-63ed-4a0b-9fb1-47152908acc9
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00371-00170-177-629092-00-1033-7600.0000-3132012
  Installation ID: 014524044086706882994890873683587011910490414255584555
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: HVY8B
  License status: initial grace period
  Time remaining: 41280 minute (s) on (28 day (s))
  Remaining Windows rearm count: 3
  Trust time: 10/11/2012-06:49:09

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: n/a
  Beyond: 0 x 0000000000000000
  Event time stamp: n/a
  ActiveX: Not registered - 0 x 80040154
  The admin service: not registered - 0 x 80040154
  Output beyond bitmask:

  --> HWID data
  Current HWID of Hash: PAAAAAEACAABAAEAAAADAAAAAQABAAEAln3EZMwZHIje8kLGgJZgTsrevCAcv3Y6fj/KLK7jWVeo53ZW

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes, but no SLIC table
  Windows marker version: N/A
  OEMID and OEMTableID consistent: n/a
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC1838 APIC 073010
  FACP 073010 FACP1838
  HPET 073010 OEMHPET
  MCFG 073010 OEMMCFG
  LASRYVITRAGE OEMB1838 073010
  OSFR 073010 OEMOSFR
  SSDT DpgPmm CpuPm

  It looks like the installation that was actually in the process.

  the only thing that your report shows is the WAT update is not installed, and it is not enabled. (you are in your grace. initial period to 28 days rest).
  a non-genuine windows will work almost normally and would not lead to the symptoms you describe. In my view, the notice is by other problems that you have.
  I can read a diagnostic report, but do not have the skills to help others.

• Just installed new hard drive 1 TB

  Just installed new hard drive 1 to and vista only reads only 127 GB. How can I get vista to recognize the full 1 TB

  http://www.vista4beginners.com/how-to-manage-your-disks-using-only-Windows-Vista-disk-management-tool

  Take a look in disk management.

  See you soon. Mick Murphy - Microsoft partner