After market cartridges

Similar Questions

• Does not print black after changing cartridge

  Printer model: HP Photosmart Premium e-All-in-One Printer - C310a

  After that I changed the black cartridge, I cannot print my computer more black pages (prints blank page)

  and when I tried the printer alignment, it does not have too

  Help, please!

  Thanks for the comments. I ended up going to the place on the printer that says to clean the print head and it has worked, at least for now. If this isn't the case, then I will try to clean it with hot water. Thank you

• Color LaserJet CP1025nw: printer does not print after changing cartridges

  I just inserted cartridges M, Y and C in my printer.  They are official cartridges 126 a.  I followed all the instructions (shook gently, removed the orange protective cover and pulled the Ribbon out).  I inserted one at a time, waiting after each insertion for the printer to run through its cycle.  Then I tried to print a color print job with no luck.  Then I tried to print a simple typed page - once again, no luck!

  Is it possible to print a test page?  I don't get any messages on my computer.  When I look at the print queue, it says "error printing".  Help, please!  Thank you.

  Note later: my mistake!  I turn on the blue light from the top; Once lit, the printer has been good to go.  Can tell you that I'm not very technologically savvy?

  So it works very well now?

• HP Photosmart 3210: I can't close the top of my hp3210 printer after changing cartridges

  After changing a few cartridges of my hp3210 photosmart printer I can't close the top, there is something blocking

  This youtube video can be useful: replace the ink cartridge

• Help - hp deskjet 5650 - printer cannot print black after changing cartridge

  original title: help the printer - hp deskjet 5650

  OK, so my black printers ink ran out, so I changed the cartridge.  The cartridge said it is appropriate for my printer.  However, now he usually print anything in black... Help!

  Replaced by Inkrite H-56 who say that it is suitable for Deskjet 5650.  I ran the test page, still no black ink.  Any tips?

  Hello

  If you have a problem after the replacement of a material component, the manufacturer with your HP printer ink cartridge

  link below has Manual HP how etc. for your model

  http://h10025.www1.HP.com/ewfrf/wc/product?product=304445&LC=en&cc=us&DLC=en&submit.y=4&submit.x=8&lang=en&cc=us

  or contact HP

  http://h10025.www1.HP.com/ewfrf/wc/contacthp?LC=en&DLC=en&cc=us&lang=en&product=304445

  or hp support forums

  http://h30434.www3.HP.com/

• HP Photosmart: Printer does not print more thin lines after changing cartridge

  Hello!

  I changed the black ink cartridge (HP original) and who has never been a problem. But now when I try to print a verified page it displays only executives thicker and not thinner lines. See pictures of what it should look like and what it will be printed as now.

  I wouldn't waste ink by cleaning the heads as this impression only uses black and black is new. I tried the so-called "Align" but that did not help. (I took a few steps, but after he said it failed.)

  Heeeeeellpppp!

  Best regards

  Anna

  

  Ah, it's working now. I cleaned the heads and reopened the PDF that I thought that maybe it was not loaded correctly, even if it looked good. Now it is printed on the lines.

• DeskJet 832c disappeared ink after new cartridges installed.

  I have a deskjet 832c missing ink after installing new cartridges (23/45).   Strange, but just recently, it does not print MS Word doc but prints OutLook e-mail.  Test page prints OK but faded.  B & W only options but no change and tried to color.  Removed the printer and let Win re-find-the XP (drivers) and no change.  any ideas?

  No lights or error messages.

  No new application installed on the PC.

  O/s updates are performed regularly.

  Identify the root cause.  The date code on the cartridge has been since 2008!  Apparently, I had an old cartridge laying around and finally take advantage.  After the installation of a "fresh" cartridge (2014 date code), the printer is back to normal.

  I always find it interesting that 2008 cartridge didn't print documents from MS word but print e-mail and test pages OK (but faded) w / the option to print black and white...

  in any case, case closed.

• print in color questions after changing cartridges

  My Deskjet 1000 J110 printer do not print in color, after that I replaced the cartridges with original HP cartridges.

  It prints black, but no color. I tried 2 HP 61/color cartridges, so far, but without success in everything except black.  I also made several attempts to "ask a question", only to have the search engine telling me "no one else has asked your question. I also spent a lot of time reading threads in the hope to come across a solution, but without success.  Can you help me, please?  I use the printer on a HP Pavillion G6 series laptop that I just bought the last sale online from HP, less than 4 months... The OS is Windows 7 Home Premium Service Pack 1.

  In this page troubleshooting steps can help solve the problem.  The diagnosis in Solution 6 page shows the color?  If so, the question is probably in the driver or its settings.

  If the color does not print in the diagnosis page then the document here may help.

• HPDeskjet 3070 DOES NOT PRINT AFTER CHANGING CARTRIDGE.

  After changing all four cartridges in printer Deskjet 3070, is no longer prints black, produced a blank sheet on the copy function and will only print jpg files, this happens with the Dell laptop on USB or network, also Dell laptop computer on the network (not tried USB). The printer worked perfectly before the change, on the site of consumables HP HP cartridgesare. This is the third change of cartridge (HP, always) since the purchase of the printer in November 2011, they appear in the last four months.

  Hello JohnFo

  So the color is printing, but not black? What happens if you make a color copy by using a black text word document? I suggest as a result of the article below. It contains troubleshooting steps for the white pages. If the problem persists check the next few sentences.
  Printer prints white sheets of paper

  The problem could be a bad cartridge. Before working on the printer as the article suggests you should contact HP. All authentic HP ink cartridges come with their own warranty, so if you call HP on the cartridge, you should be able to replace to help determine if the cartridge is the problem.

• HP C4480 printer makes the black spots on the longer side after change cartridge

  After several years of impeccable service (thanks, HP!), my C4480 House today started leaving black fingerprints on one side 8.5 "x 11" long.

  This started after I replaced both cartridges with certified HP cartridges.

  Three printed documents were all the same--a moderate amount of burrs in the bottom right of the document, tapering to light burrs on the top right.

  The tasks are diamond shaped. They start as a string, but 1/3 of the way to the top of the page, they space out about 1/3 inch of distance.

  I unplugged and replugged the power and USB cables at both ends, make sure the glass is clean and remove and reinstall the cartridges.

  No change.

  I'm no technician but it looks like a mechanical problem, not software.

  I scanned a printed list and joined here as a JPG.

  Thank you, all.

  Arrgh... looks like the document is incorrect, and I don't have a C4480 to check.  Said the full user guide here:

  Print a self-test report

  If you experience problems printing, print a self-test report before replacing the ink cartridges. This report provides useful information on several aspects of your product, including your print cartridges.

  To print a self-test report

  1 load letter or A4 unused plain white paper into the input tray.
  2. press and hold the Cancel button and then press the start copy color button. The product prints a self-test report, which may indicate the source of the print issue. Below is an example of the test of ink of the report area.

  I will file a bug report to get the document updated.

• ink printer button continues to Flash after new cartridges replaced correctly

  Replace all printer cartridges according to instructions printer, ink button is still blinking.  Have unplugged unit and no change.

  Hi Jody,.

  If the flashing is on the printer itself, your best bet for good support would be with the manufacturer of the printer.

  If the flashing is on a window inside your PC, then we should probably do the following:

  1. remove the printer from the PC.

  2 uninstall the printer from the PC driver.

  3 reinstall the printer driver.

  4 reinstall the printer.

  Several references to printer:

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Find and install printer drivers

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

• Motherboard, after market video card replacement or owners of HP?

  I have a Presario SR1610NX desktop she waved, fragile, wobbly, lines (get a) on the screen.

  I tried everything, I say all reasonable to try to fix it and failed.

  Now, I try to replace some hardware to save this beast.

  If I go with replacement / without going through the integrated graphical subsystem: ATi Radeon Xpress 200

  I wonder if I can add any brand pci-e 16 x card or that HP is going to require a

  card owner (as I've seen cards with HP in the title, I hope not)?

  I could also just put in a new (mobo / motherboard / motherboard):

  I also wonder if any micro ATX mainboard may be slapped

  (of course that's all I need for system box)

  or the system (my hard drive) will not recognize anything but the original mobo?

  HP/Compaq adds or tweek the mobo, maybe something in the bios? I would like to Flash the

  BIOS from HP after installation?  I have replace mothers before but

  only on systems I've built and not on a large computer brand.

  MSI MS-7184 SOCKET 939 and Compaq calls AmethystM-GL6E.

  The same thing right?

  Anyone who has made alterations on a Compaq with material aftermaket mobo please give

  me a leg up. Thank you

  Message edited by Plattcan on 04/26/2009 12:34

  If it's right for your platform page: http://support.hp.com/us-en/document/c00472088

  Who says that your computer was released in 2005 and was minimual material, even for the time.  If you plan to try to get this fixed with a video card, then you can go with a relatively low-end PCI-e card without any problems, but whatever it is in the nature of game would probably require a new PSU as says dmhoo29.  Light that you use onbaord graphics though, I guess you're not game.

  Change the motherboard is probably not worth it unless you can get a direct replacement for this: name of the motherboard: name card mother MS-7184 HP / Compaq: AmethystM-GL6E.    From a computer used like on EBay or a friend.  And most likely the recovery/reinstall disk for the operating system won't work and you need a retail version of XP.

  First, borrow a monitor and/or video card to a friend to see if that helps before I ask a lot of money.

• C410 Photosmart will not print red after magenta cartridge replaced

  Hello

  I just replaced the cartridge Magenta on my Photosmart C410, it was a genuine HP cartridge and the printer shows ink levels are now full but when I try and print anything in color that it is, or printing of the Red hues.  Any suggestions as to what I can do?

  Thank you

  Hello

  Please click here here for access which should solve the problem.

• Upgrade from CS3 to CS6 - after market disappeared stuff!

  After my CS3 to CS6 upgrade, my after-sales articles can't be upward.  (Dashboard of the Kubota Action, Totally Rad Actions RadLab...)

  My inexperience guess the CS6 would replace the CS3 in the upgrade, but now I have two programs... with my after-sales products and the other without.

  Any help out there?

  Thanks in advance...

  Dawn

  Only, you will need to reinstall your third-party products. If they support CS6, their installers will place all the elements in the right place. Otherwise, only contact sellers to inform on how to proceed.

  Mylenium

• Sony KD-65XD8505 wifi disconnect after market turn / stop

  When I configure wireless with my Sony KD-65XD8505, it works fine until what I turn it off, when I turn it back on, it tells me that it is connected but there is no internet connection.

  Now, I'm positive, that there is an internet connection as my laptop / phone all work with wifi.

  If I remove the connection and you add once again it works but it's very annoting, anyone know a solution?

  It wasn't, however, I contacted my ISP and I replaced my router with support from HQ and now it works fine.

  I think that there are problems with the old protocols.