After reboot windows take position reset)

Similar Questions

• From databases after reboot Windows (same OS different results)

  I had a strange situation.
  
  OS Windows XP. Professional
  Database 10.2.0.1
  
  The same CD was used for both facilities.
  
  We did an Installation on a PC at the office and Oracle starts after the reboot.
  We did an Installation on a Client Site and Oracle does not start after reboot. It had to be configured manually via the Administration Assistant for Windows.
  
  (i) what is the default behavior that is supposed to be?
  (II) could it be related to windows O.S. privileges?

  YES

• Cannot install the update for Windows vista (KB2718704) a safe mode or after clean window reboot

  I can't install the update for Windows vista (KB2718704), a mode without failure or after clean window reboot.

  What should I do?

  Hello

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         You are able to install other updates successfully?

  Follow these methods.

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot State to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  You cannot install some programs or updates

  Note: You must take the backup of the data before performing any installation of windows.

• Windows 7 hangs after reboot

  After that windows 7 attempted a system update hangs on the failure of configuration updates Windows - coming back from changes.  After hours of waiting, it remains the same.  I tried a hard reboot and selected "start in safe mode" and 'start in last good configuration' and 'debug mode' and in all cases, the system goes right back to the "failure configuration Windows...» "How can I leave it this loop?

  Restore to an earlier date that the latest updates have been made.  Use the system restore.

  Next, we need to prepare your system to properly manage the Windows updates.  It will take a long time (like a day or more), but in almost all cases, this becomes Windows Update on track.

  1. Download and run the appropriate version for your system KB947821 update readiness tool system.  https://support.Microsoft.com/en-CA/KB/947821 32-bit systems X 86.  X 64 64-bit systems.  This is likely to take some time (may be several hours) because it makes all kinds of resets.
  2. Download KB3102810 directly from the Microsoft web site and install it.   https://support.Microsoft.com/en-us/KB/3102810 32-bit systems X 86.  X 64 64-bit systems.

  Now restart Windows Update.  Do NOT restart Windows.   Be very, very sick, it will probably take a while.  Recently, the whole process took 24 hours or more time elapsed in my work on my client computers.

  Now, your challenge is to be PATIENT.  This can take several hours.

  Tip:

  Restore points

  The amount allocated to the point area by restoration by default in Windows 7 is 3% of the capacity of the disk.  In almost all cases, the computer uses but a small part of the available space.  This makes it very convenient to raise that 3% to say 8-10%.  This strategy will give a lot more restore points that will give you much more flexibility to recover a bad situation.

  To change the award, type create in the text box above the start planet.  Select create a restore point.  Click set up.  Move the slider to the right as you see fit.  Definition it to 50 gigabytes will have no effect if you have a 500 GB drive and use only about 100 or so, which is very typical.

• Windows 7 Edition Home Premium. After that windows update will in a reboot loop

  Windows 7 Edition Home Premium. After that windows update KB982926 & KB982670, will in a reboot loop, 64 bit, Dell Studio XPS. I used F8 & restore to burst. Tried the update again with the same results. Silverlight & Net Framework updates

  Hi pbmass,

  I want to clarify if you are able to start the computer on the desktop after the system restore.

  Follow the steps mentioned below and then try to install the updates manually

  Step 1: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Step 2: Run the fixit available in the link below to reset windows update components.

   

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

   

  Step 3: Disable the security software; Follow the steps mentioned in the link below

  Disable antivirus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important: Activate security software once everything is done.

  Step 4: Download the update manually and then install them

  The .NET Framework 4 Client Profile is available on Windows Update

  http://support.Microsoft.com/kb/982670

  Description of the update for Silverlight:

  http://support.Microsoft.com/kb/982926

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Update will not install after reboot required.

  Update of security for Microsoft Visual C++ 2005 Service Pack 1 (KB2538242).

  I'm running Windows 7 x 64.

  I have a Windows update that requires the closing down to install.   This is not, and after reboot, I have a slower computer.

  At this point, even removing the offending program would be useful.

  Thank you for your expertise.

  Hello

  Try the methods provided below and see if they help to resolve the issue.

  Method 1:

  In the case where you are not able to install specific updates then, try the troubleshooting provided in the link below steps to fix the problem.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Method 2:

  You can also try to reset the Windows Update components and check if that helps.

  Click on the link provided below for more information about resetting Windows Update components.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 3:

  Start the computer in a clean boot state and then try to download the updates manually.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note:

  After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Download the updates manually from the link provided below.

  MFC Package security update Microsoft Visual C++ 2008 Service Pack 1

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=26368

  MFC Package security update Microsoft Visual C++ 2005 Service Pack 1

  http://www.Microsoft.com/download/en/details.aspx?ID=26347

  I hope this helps.

• How much time after reinstalling window 7 32 Home Premium it take before that receive updates?

  * Original title: update Windows 7

  How long after reinstalling window 7 32 Home Premium does it take before that receive updates.

  Should be immediately the minute that an Internet connection is detected. I would advise that you install updates Windows Update batch well. There are about 300 post SP1 updates, more if you have reinstalled the version Windows 7 RTM.

  My recommendation would be to install updates in batches, these 5 at a time, exclude the hardware/driver updates. Avoid installing a set of updates for Microsoft Windows and Office at the same time. Also, try to install the first small updates. Avoid installing things like the .NET Framework and SQL Express updates.
  Whenever you install updates (it's a chore, but it guarantees a more reliable experience). Try to start the Microsoft Office updates for programs such as (Word, Excel, Outlook, PowerPoint).
  Another thing, try to download the updates, and then install them. When you are prompted to restart, disconnect from the Internet and restart your computer.
  To proceed with the installation of additional updates.
  If the continuous computer to become unresponsive, try the following:
  
  You can reset the Windows Update components by running the Fixit on this page.  But if there is malware present, she will continue to reset the connection to the update servers:
  How to reset the Windows Update components
  http://support.Microsoft.com/kb/971058
  Suggest you download and save the Fixit.  Then configure the system before the clean boot by running:
  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7
  http://support.Microsoft.com/kb/929135
  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously.  Now run the Fixit and choose the default mode.  Restart once it's done and see if the system can be connected to the update servers.  If he can't, then rerun the Fixit and choose aggressive mode.  Turn it back on when he finished the race and updates.
  I suggest before you stop and install the updates, disconnect from the Internet, first.

• 29 Firefox: toolbar guard reset after reboot

  Hello

  I use Firefox 29 since the first beta, and I did several customization menu. But if I take the 'Star + favorite' icon to the next restart I find in its default location (that is, before the menu button).
  Other items added to the toolbar disappear after reboot as well.

  I tried to return to default and the problem persists.

  I also tried to delete the localstore.rdf file and the problem remains.

  The problem is somehow similar to the following

  https://Bugzilla.Mozilla.org/show_bug.cgi?id=854226

  I prefer not to create a new profile since I many extensions, so I ask if there is another file, containing these customizations, what I could try to remove it.

  Thank you.

  Underpass, I'm sure you're problem is caused by one of your modules.

  Can you try to pin-point the offending module? I would suggest the following method:

  1. Cut the half of your add-ons (disable in the Add-ons Manager) and restart Firefox.
  2. If the problem is still there, turn off half of the other add-ons and restart Firefox.
  3. Continue step 2 as long as you can reproduce the problem.
  4. If the problem in not there anymore, the offending module is among the list you just disabled and should be easier to find.

  Thank you!

• Windows 7 hangs after reboot (after "Sensor HP Mobile Data Protection" updated)

  My Windows 7 Home Premium hangs (blue screen) to the 'Starting Windows' screen after reboot. And the reason for the rebate to zero (and crash) is updated to Windows "HP Mobile Data Protection Sensor" . I did hidden, but now I need to install drivers for my webcam and every time that I turn on "automatic driver installation" update of windows server, it installs not only the WebCam drivers, but also this «HP Mobile Data Protection Sensor» update Which brings me to the crash at the next restart of Windows. The only way is to return to the system restore point.

  I use a laptop "HP Compaq 6715 b" . I had Vista prior to this (it was preinstalled with HP all the "stuff"), but after upgrade (reinstallation) of windows 7, upgrading from windows found all the drivers (and graphics and sound and even the biometric device drivers), but is now something wrong after every update "HP Mobile Data Protection Sensor" . Why? Or at least I can make him 'banned '?

  P.S. I had and have the 32-bit version of Windows.

  ny6uctblu,
  Have you checked with HP on any problems with this software?  Here is a link for download of HP for the software.  You should also check that your BIOS is up to date.  I found some info on a wire of HP on the Data Protection sensor Mobile works is not propely.  This thread can also give you some other ideas.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The calendar settings reset after reboot

  Hello

  Could someone please check if you have the same problem on your phone?

  Sony calendar resets the settings after reboot.

  For example, if I put "week begins on ' = 'Monday' and restart the phone, this setting will return to 'Sunday' (which is the default).

  I am now running Calendar 20.0.A.2.5, but I think that this bug existed before as well (even on my old V Xperia I think)

  P.S. I found this subject, but I did not understand the solution correctly or it does not work for me... I tried to disable the calendar app, but it did not help somehow...

  There were improvements made on this subject and if you update the 23.4.A.0.546 phone and use the latest Google Calendar app I hope not to have this problem more.

• Downloaded Windows 10. Yet, after each reboot, windows 7 restart... no windows 10?

  Original title: Windows 10

  I have a laptop with windows 7 installed. I ran a few the applet to see if the laptop is eligible. He did, and I see the windows icon 10 appearing in the task bar. I click on it to get the upgrade and windows starts the download process. Then after it is downloaded double click on the file and it seems to be the installation. This seems to go to the end and I restarted several times when asked to do so.

  Yet, after each reboot, windows 7 restart... no windows 10.

  Review:

  • How to: 10 tips before installing Windows 10
  • How to: 10 things to do if the Windows 10 install fails.

  Retry the upgrade manually:

  Option 1:

  Download the media creation tool

  Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

  

  Note: How to check if you are downloaded or installed the update Windows 10 November

  How to create an ISO or USB drive.

  Select upgrade this PC now and then click Next

  

  Option 2:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• Office files and missing files after reboot. Windows XP

  I have a user who uninstalled Acrobat 8 Professional and when they restarted and stored in their profile all the icons and files have disappeared. I tried to do a system restore to the point before the uninstall and still no luck. Everything that is related to the profile is always functional (i.e. printers network, Outlook settings, network drives.)  It's like just wiped profile or delete Desktop folder.

  Hello

  Method 1: perform the steps from the link below and see if it helps.

  Your desktop icons are missing in Windows XP

  Method 2: perform the steps from the link below and see if it solves the problem.

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

  Hope this information helps.

• Viable way Top 2 to create Windows 7 password reset disk in all conditions

  This article describes how to create and use a disc to reset password of Windows 7 to a computer before and after that you forgot the password. You can use Windows 7 CD to reset password to access your computer.

  Scenario 1: I put t forget the password again.

  Windows 7 has its own backup feature, and you can create proactively a Windows 7 password reset disk before you forget it. With it, you can easily reset your password of Windows 7 and do things in your PC.
  Follow the steps below to create a reset disk of your own Windows 7 account password. Here's how:

  Note that this procedure requires a formatted blank floppy disk.

  1. click on 'Start'-> "control of the accounts of users and family safety"->""-> "user accounts".
  2. in the task pane, click "Create a password reset disk". The wizard 'forgot password' is displayed.
  3. click on 'Next' and choose the portable media player.
  4. click on 'Next', then enter your current password in the following box and click "next".
  5. Windows 7 starts to create the reset disk of password on your chosen media. When the progress bar reaches 100% complete, click 'Next' and then click 'Finish '.
  6. now you can remove your device and store the disk in a safe place. Once you have forgotten the password in the future, you can take it out.

  Follow the steps below to use a password reset disk to recover password of Windows 7. Here's how:

  1. the created disc of password can now be used for log-ins to reset the password. A password reset link appears on the account screen after an unsuccessful attempt to open a session.
  2. click on "password remains", and opens the dialog "password reset Wizard". Here, you will have to insert the disc to reset the PC.
  3. follow the wizard to enter a new password twice to make sure that you type the password. You are proposed to create a new indication of password, so that you remember the password with it if you forget.
  4. Windows switches to Windows Journal in the new screen where you can use the new password to connect.

  Scenario 2: I already forgot the password.

  If you have forgotten your password to Windows 7, but don t have a password reset disk on hand, you can choose another way to reset the password.

  Here's how to create Windows 7 password reset CD/USB:

  1. this procedure requires a USB flash drive or CD. Insert your media device into another computer that has access to the system as administrator.
  2. launch Windows 7 password reset software disc. On the main interface, choose "reset the local Windows account password.
  3. choose your target device, and then click "Burn" start Windows 7 password reset creating the diskette.

  Here's how to reset the password of Windows 7:

  1. with this software Windows 7 password reset USB, start the computer that you want to reset the password.
  2. under Windows PE, can access you the main interface of this software. Choose your Windows system and select the user account you want to reset the password.
  3. click on 'Reset' and then 'Yes' & 'OK' in order to remove the password of Windows 7.

  Pretty easy, isn't it? After that the system control password reset completely, you will never worry your bad memory

  + The message was edited: link has been removed.

  Very interesting announcement.
  Thank you.

• BeatsAudio missing/replaced after installation Windows 8.1

  Hello

  When I bought my laptop (HP Pavilion 15-p044tu), it had installed Windows 7. In addition, BeatsAudio controller installed.  Then I installed Windows 8.1 64 (clean install, not upgrade from 7) and it required a full format of my HARD drive. So all readers wiped out which one had driver & OS backup stored.

  After installing win8.1, I went to HP support page for my laptop and manually downloaded the drivers (including Audio drivers) from there. Please note that some of the drivers have been installed automatically by windows and there is no 'unknown device' in my Device Manager s tree "other devices."

  The problem I faced is that there is no BeatsAudio interface anywhere. It has been replaced by "Realtek HD audio". Even in the control panel where there was a bat icon, there is a realtek icon now. I searched other forums where they suggested IDT audio driver installation that will bring back the beats, but there is no such driver on my driver for laptop page. I tried the drivers for windows 7, but got no positive result. Also I tried to install different models for different laptop computer to the windows version IDT drivers but it says, "the hardware found is not supported by this IDT Audio Driver" & stop the installation process.

  I also tried to install it in safe mode, but got the same result. Note that my audio works as usual with realtek, but the soun is lower than before. I just need the audio back beats.

  Please help me with this problem. I searched your forum, but did not get any solution (just different drivers IDT which resulted in the same thing).

  Waiting for a response.

  Thank you.

  Hello

  Interface audio beats is provided by the audio software installer - this can be IDT or Realtek according to the material.

  Try the following.

  Download the Realtek Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66107.exe

  When finished, press and hold the Windows key and press R.  In the run window, type devmgmt.msc and press ENTER.

  Expand sound, video and game controllers.  Right click on the Realtek device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the Chipset driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66094.exe

  After reinstalling, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Let Windows load completely - it can automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the installation of Realtek Audio program and select "Run as Administrator" to launch the installation.  Once this done, restart the laptop again and let Windows take over completely for a few minutes before trying to launch the interface of beats for the Windows Control Panel.

  Kind regards

  DP - K

• Bug in Vista without response: the icons of the Office Keep disappear after reboot - have to manually make it visible each time that

  Vista!

  Bug again issue: Vista Desktop Icons keep disappearing in the course and more !

  Out of nowhere, my desktop icons disappear after reboot. When I reboot, they appear for about a second and then they are gone .

  I have to manually select the view desktop items box every time after a reboot . I tried a clean reboot but nothing. By coincidence, the sidebar keep appearing EVERY TIME that I reboot my unchecking it displayed when it restarts.

  Y at - it a fix for this bug that continues to make my office disappear and make me manually make them visible?

  Help!

  Hi ad391970,

   

  The reason for updates make changes on the computer would be some conflicting third-party programs or there might be a corruption in the Windows Update components.

  I suggest that you try to install updates by disabling the third-party program conflict and check if it works.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Perform the check and the clean boot if you have the problem.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  If the problem is resolved to check what is the cause of the problem, referring to the link given below:

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  Click Start, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  On the general tab, click the Normal startup option, and then click OK.

  When you are prompted to restart the computer, click on restart.

  If the step above does not resolve the issue updates suggest that you try to reset the component of windows update and check if it works.

  Check out the link below to find out how to reset the windows component update

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  If the step above does not resolve the question suggests that you check in a new user account if you are faced with a similar question. If a face similar to a new user account which means your other user account has been corrupted.

  See the link below for screw a corrupt user profile.

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Hope this information is useful.

  All the best!

  Thanks and greetings

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.