The calendar settings reset after reboot

Similar Questions

• The mouse pad on laptop XP always settings reset after reboot

  Pad parameters (touchpad), I put the mouse on my laptop Dell running XP Home edition. When I reboot all my settings are gone, and I'm back to the default value.

  I found the answer for Vista that says remove startup KHALMNPR, but I don't have anything like that in my startup.

  How can I get these settings to 'paste' beyond a reboot?

  Thank you

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• my calendar has frozen after trying to move a clip in e-mail by using the calendar; still frozen after that force them to leave

  my calendar has frozen after trying to drag and drop a piece of mail to the calendar; still frozen after forcing them to leave... using OS X v 10.9.5

  Get the error that civilian could not be refreshed... requires a force quit and then when reopened, get the same message

  Try restarting your Mac in safe mode:

  -Stop your Mac

  -Wait until your computer turns off and after that press the power button

  -Just after you hear the startup tone, press in and hold the SHIFT key

  -Release the SHIFT key when you see a gray Apple sign and the progress under this sign bar

  -Once you see office, start a scan Disk Utility to detect and repair file system errors (remember to choose your primary hard drive)

  -Click on the disc to check, then, if requested to solve the problems on the repair disk

  -After that click on verify disk permissions, and then click Repair disk permissions

  -Once the process is complete, stop your Mac and turn it on again after 30 seconds

  I hope this helps!

• My Photoshop CC 2015 does not work correctly. After I edited some photos and I want to meet one of them, the program Terminates? After reboot, the program charges all files again...

  My Photoshop CC 2015 does not work correctly. After I edited some photos and I want to meet one of them, the program Terminates? After reboot, the program charges all files again...

  Hello

  Make sure that Photoshop is closed.

  1 - go to this place C:\Users\user name\AppData\Roaming\Adobe\Adobe 2015\AutoRecover CC in Photoshop

  You will be able to see all the. PSD file that opens automatically when Photoshop is open, delete or move all the files in this folder.

  2 - restart Photoshop and go to edit > preferences > performance UN check the gpu processor use and restart Photoshop.

  It should be working fine now.

  Thank you

• Parameters of system tray icons keep the reset after reboot

  Hello

  My system tray icon settings are lost whenever I restart my laptop.

  I tried to reset all settings, I tried to install the experimental fix Windows6. 1 KB979155-x 64.msu nothing works.

  I also tried the following registry settings that now I have no more than two keys mentioned and I do not know if they had to be re-created after I cancelled them.

  1. Click Start , type regedit in the Search box and press ENTER.

     If you are prompted for an administrator password or for confirmation, type the password, or click allow .

  2. Locate and then click the following registry subkey:
     Settings\Software\Microsoft\Windows\CurrentVersion\TrayNotify HKEY_CURRENT_USER
  3. In the Details pane, click the IconStreams registry entry.
  4. On the Edit menu, click delete , and then click Yes .
  5. In the Details pane, click the PastIconsStream registry entry.
  6. On the Edit menu, click delete , and then click Yes .
  7. Exit Registry Editor.
  8. Restart the Explorer.exe process. To do this, follow these steps:
     1. Press CTRL + SHIFT + ESC.
     2. On the process in the Task Manager tab, click the process explorer.exe and then double click on end process .
     3. On the file menu, click new task (run) , type Explorer and click OK .
     4. Exit Task Manager.

  The only option is either to have all the icons in the sawn system tray which takes 3\4 of my task bar or do them all hidden which is a pain in the neck because I have to open the "new taskbar" every time.

  I hope someone can help me.

  Thank you :D

  Hello

  As you have removed the registry keys, I recommend you to run a system restore to restore the work correctly the settings.

  Note: You must first create a restore point on your computer to do that you must follow the steps below.

  1. open the control panel (all items view).
  (A) click on the system icon.
  (B) proceed to step 3.
  or

  2. open the Start Menu.
  (A) right click on the computer button and click Properties.
  3. click on the System Protection link.
  4. close the system window.
  5. check to make sure you have System Protection turned on for the list available on the disc, that you want to create a restore point, to include in the restore point.
  6. click the Create button
  7. enter a description to point restoration in order to recognize it when you do a system restore and click on the button create.
  8. you will now see this as the restore point is being created.
  9. when the restore point is finished being created, click on the close button.
  10. click on OK.

  Follow the document below for additional guidance on the creation of System Restore Point:
  http://Windows.Microsoft.com/en-us/Windows7/create-a-restore-point

  After completing the steps above, you will need to follow the instructions below:

  1) click Start, type system restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  (2) in the System Restore dialog box, click on choose a different restore point and then click Next.
  (3) in the list of restore points, click a restore point created before you started having the problem, and then click Next.
  4) click Finish.

  For more information, see this link below.

  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  After you perform a system restore, follow these steps below to configure the icon settings according to your choice.

  1. click on start.
  2. tap icons customize.
  3. click on customize icons in the taskbar.
  4. click on turn system icons on or off.
  5. place the icons you want on.
  6. click on ok.

  Note: Make sure that the behavior for the selected icons is set correctly, and then click OK.

  Thank you, and in what concerns:
  I. Suuresh Kumar-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Color calibration settings reset after restarting the computer

  Hello!
  I had a really hard time with my monitor calibration.
  I will try to describe my problem as simple as possible. I hope that someone will find a solution to this because I just couldn't.

  SYSTEM:
  ASUS N750JV, Intel Core i7, NVIDIA GeForce GT 750 M + Intel HD Graphics 4600 and, of course, Windows 8.

  PROBLEM:
  "Calibrate display" settings change/reset back from each time after restarting the laptop, shut down or put to sleep.

  DESCRIPTION OF THE PROBLEM
  I just can't calibrate my screen. Everything I do just does not work.
  Calibrating monitor in Windows 8 works very well only during the time when I actually do
  But if I restart, stop, or put my laptop to sleep just goes back to normal.

  For example, as a first step, the screen of Loggin on Windows 8 when I start seems calibrated.
  but when I connect I wait 2 seconds or two and all my settings are changed in return.
  I have to recalibrate the screen again and again once and again and again...

  Swear to God that I tried all possible solutions to solve my problem and none of them worked.
  I have read a lot of forums, and I can't find the solution that actually works.
  I did the solution 'Safe mode' , the 'clean boot' solution, in 'color management', I changed the settings (in a way that people who said it should work).
  I've updated all my drivers (my system than the GeForce GT 750 M is up to date). I installed all available updates for Windows 8 (when I check updates, the system tells me there aren't everything and my system is also up-to-date).

  I guess there could be a problem with my graphics card. I know that everyone has had problems these last time with the new update for GeForce, but like I said before, if I have confidence in my laptop then my graphics card is up-to-date.

  It really bothers me. It's annoying and I'm frustrated by that. The worst is that I can't find a solution to this, so I'm really asking for help.
  Thank you!

  Original title: calibration unsolved display problem - Windows 8

  Adeline B, thank you very much for your answer.
  I'm sorry that I have not responded in such a long delay.

  Well, my problem has been resolved. I downloaded my GeForce graphics driver was last updated.
  Now everything works fine.

  • I know that this problem can be irritating. If anyone has the same issue so I recommend you (like everyone else) download of the updated driver for your graphics card.
  • If this does not work, try to calibrate your system using programs/software installed on your computer by your manufacturer. In my case it was splendid ASUS utility. I also used Intel® HD Graphics Control Panel.
  • Another thing is you may think that your system does not calibrate when it actually... made. So what you can do, it's just waiting for the start until your system is finally charge up. In my case, Windows 8 something takes about 10 to 12 seconds, until what it changes all the settings of ' my settings'.»» Then first Windows 8 loads up to original settings (and this is why you find that your screen is not calibrated) but then it loads the calibration settings you make before you restart and all is well.

  I know this sounds so easy is probably not solve anything, but when I had this problem with the calibration I was so irritated by it I wasn't noticing the changes! I'd just instantly to the desktop or control panel configuration, or web and try to solve the problem, without waiting for my system completely load all settings. But... If the wait does not then consult my previous statements.

• Bug in Vista without response: the icons of the Office Keep disappear after reboot - have to manually make it visible each time that

  Vista!

  Bug again issue: Vista Desktop Icons keep disappearing in the course and more !

  Out of nowhere, my desktop icons disappear after reboot. When I reboot, they appear for about a second and then they are gone .

  I have to manually select the view desktop items box every time after a reboot . I tried a clean reboot but nothing. By coincidence, the sidebar keep appearing EVERY TIME that I reboot my unchecking it displayed when it restarts.

  Y at - it a fix for this bug that continues to make my office disappear and make me manually make them visible?

  Help!

  Hi ad391970,

   

  The reason for updates make changes on the computer would be some conflicting third-party programs or there might be a corruption in the Windows Update components.

  I suggest that you try to install updates by disabling the third-party program conflict and check if it works.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Perform the check and the clean boot if you have the problem.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  If the problem is resolved to check what is the cause of the problem, referring to the link given below:

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  Click Start, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  On the general tab, click the Normal startup option, and then click OK.

  When you are prompted to restart the computer, click on restart.

  If the step above does not resolve the issue updates suggest that you try to reset the component of windows update and check if it works.

  Check out the link below to find out how to reset the windows component update

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  If the step above does not resolve the question suggests that you check in a new user account if you are faced with a similar question. If a face similar to a new user account which means your other user account has been corrupted.

  See the link below for screw a corrupt user profile.

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Hope this information is useful.

  All the best!

  Thanks and greetings

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• 29 Firefox: toolbar guard reset after reboot

  Hello

  I use Firefox 29 since the first beta, and I did several customization menu. But if I take the 'Star + favorite' icon to the next restart I find in its default location (that is, before the menu button).
  Other items added to the toolbar disappear after reboot as well.

  I tried to return to default and the problem persists.

  I also tried to delete the localstore.rdf file and the problem remains.

  The problem is somehow similar to the following

  https://Bugzilla.Mozilla.org/show_bug.cgi?id=854226

  I prefer not to create a new profile since I many extensions, so I ask if there is another file, containing these customizations, what I could try to remove it.

  Thank you.

  Underpass, I'm sure you're problem is caused by one of your modules.

  Can you try to pin-point the offending module? I would suggest the following method:

  1. Cut the half of your add-ons (disable in the Add-ons Manager) and restart Firefox.
  2. If the problem is still there, turn off half of the other add-ons and restart Firefox.
  3. Continue step 2 as long as you can reproduce the problem.
  4. If the problem in not there anymore, the offending module is among the list you just disabled and should be easier to find.

  Thank you!

• Keep the Lightroom settings reset.

  Everytime I open lightroom Im noticing my lightroom in particular settings at export settings are reset.   I'm using the latest version update, Windows 7

  My preference in appdata/roaming/adobe/lightroom/preferences file is showing that the last update 15/09/2015

  Hi taranom

  I suggest the first backup of your catalog so that preferences are corrupt need the saved settings.

  Also save your Presets in Lightroom

  Then move the preferences file"Lightroom5Prefernces.agprefs located in appdata/roaming/adobe/lightroom/preferences on the desktop and restart Lightroom.

  Concerning

  Assani

• y550p color calibration settings ignored after reboot

  I use the calibration color in windows manager and its fine. But whenever I restart, the colors turn bright and ignores the previous settings. What is the problem here? To mean bright yellow turn annoyingly thin, and you could hardly distinguish white. For example, I don't see even the boxes lined the sketch of this text box with the parameters of restart. Frustrating.

  Moderator edit: subject changed to reflect further discussion.

  
  

• The quiz settings: modification after the first attempt Action

  Hi all.

  I'm creating a series of learning units, and each has a quiz at the end. I was asked to set up each unit so that the user gets two attempts to pass the test. If they fail on their first attempt, they go to the beginning of the unit to review additional documents. If they fail in their second attempt, an email gets automatically generated to the author of the series. Two options are available in the test configurations, but it seems to me that you cannot choose a different action on each attempt.

  Does anyone have a solution?

  Thanks in advance.

  If they fail on their first attempt, I guess that you gave them the chance to take the Quiz by clicking on the button on the Quiz results slide.

  When the student clicks on resume Quiz, it will return back to the first interactive object scored in the project.  This is the beginning of the scope of Quiz.  If you add a button or click on to the first slide of the project, you effectively extend the reach of Quiz so that the slide and the slide in which the learner is jumped to when they click on resume Quiz.  This behavior is usually something that confuses the Captivate newbie authors, but you can use it to your advantage in this case.

  This button Retake Quiz will not present AFTER their first attempt, so the only option available after the second attempt will be revision quiz on (if you allow) or click on continue to go to the next slide after the Quiz results slide.

  You can use the value in the cpQuizInfoAttempts of system variables in Actions Advanced conditional.  For example, you can create an advanced conditional Action that looks at the value of this variable and if it is greater than 1, perform the action to send an email.  You define this conditional Action advanced fire OnSlideEnter of the blade immediately AFTER the Quiz results slide.

  Be aware that sending emails of Captivate is not a completely reliable method to get report that depends on a lot of things that are working properly and that are beyond your control.  For example mail client of the learner won't react to the mailto: event or learners themselves could not send the email (you can not automatically send an email to Captivate demeaned knowledge of the learner.)

• The LifeCam Cinema settings reset after a reboot of the system

  I want to disable the auto focus and auto exposure, but when I turn it off, they turn their backs on the next reboot of the computer. It's a nuisance to turn them off whenever I turn on the computer. You know a way to disable them permanently, or implementing a feature to do this in the next update?

  It is another question, perhaps in connection with prior approval. When I use the lifecam cinema with another device, it makes serious glitches on the image of the camera. The seeds of becomes more serious when I put my face on it, but not other objects. I think it's the face detection feature, lifecam cinema, it attempts to use the feature on the camera too. If you think I'm right, how can I turn off auto face detection function? By selecting 'no effect' on the 'Effects' tab is a not to disable :(

  Hi Efreet,

  Thank you for your message.

  I suggest to perform a clean boot to see if a startup program may interfere with your settings being saved:

  http://support.Microsoft.com/kb/929135

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Text captions are not displayed on the calendar settings after publication.

  Hi all

  I use Adobe Captivate 4. I have provided at different start times in editing for 4 text captions settings. When I saw my slide, it shows well. But when I publish and try to see, it's only dsiplaying that the first legend text and other text captions are not displayed.

  Request for help in this regard.

  Thank you very much

  Murielle

  Hello

  so, the question I ask is you have a button or box click on the slide? (I'm guessing that you do)

  Buttons and click areas normally pause the slide. My guess is that you have one that is pausing the slide before the other legends were lucky to appear.

  See you soon... Rick

• Audio-Midi Setup reset after reboot

  Hello

  I have the problem, very frustrating that my settings in configuring audio-midi-keep the reset with every reboot.

  So I tried the com.apple.audio.AudioMIDISetup.plist in Preferences, but there is no files and no Audio folder.

  It seems that Mac OS X problem create this configuration file.

  Would be nice if someone could help me here.

  concerning

  Info: I upgraded from the Mavericks in El Capitan Yosemite without. I also had some network problems, and removing the plist of network has helped here.

  Please triple - click anywhere in the line below on this page to select:

  ~/Library/Preferences/com.apple.audio.AudioMIDISetup.plist

  Right-click or Ctrl-click on the highlighted line and select

  Services ▹ display info in the Finder (or simply to view info)

  of the menu.* contextual Info year dialog should open.

  ☞ Is the dialog box display "You can read and write" in the section sharing & permissions?

  Article in the General ☞, is the locked box checked?

  ☞ What is the modification date?

  If you do not read and write access to the item, change the settings as directed here. Note, however, that if a file has incorrect access settings, probably others as well. If the item is locked, unlock it.

  * If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. Open a TextEdit window and paste it (command-V). Select the line that you just pasted and continue as above.

• Safari extensions are reset after reboot or stop smoking

  Hey guys and girls!

  I have an end 2013 15 inch rMBP El Capitan 10.11.2 running Version. It happened for about a year and now that I have some time to the school I want to dive in and try to fix it. Its driving me crazy!

  I have an interesting problem that is really stumping me. I only have a three Safari extensions: RES (continuation of development of reddit), AdBlock, Waste No Time.

  These are all parameters very sensitive especially Waste No Time extension. Whenever I have to restart or Quit Safari reset the settings of the extension. Extensions are still there, but the parameters are all back to the default. It's frustrating, as you can imagine. I must go to my block list for waste No Time, add my sites to whitelist to add block, etc...

  As regards to troubleshooting goes, I tried removing the iCloud Keychain in the keychain support enforcement. It really helps for a while. I restarted the computer and settings remained the same. However, today, I rebooted the computer and BOOM all settings disappeared again. I tried to reinstall the extensions, and that doesn't change. Someone has ideas of how to do to solve this problem?

  If you synchronize Safari via iCloud, try System Preferences/iCloud and turn off sync. Any change?