After resetting the NVRAM C309a rejected all new cartridges

Similar Questions

• Hello. There is a problem on the IPhone s 5 - after reset, the display flashes on the sides for 10 minutes, then the flashing stops. And the problem does not appear again until they do not use a Hard Reset (Power Home). The phone is new (5 days). It's a m

  Hello. There is a problem on the IPhone s 5 - after reset, the display flashes on the sides for 10 minutes, then the flashing stops. And the problem does not appear again until they do not use a Hard Reset (Power + Home).

  The phone is new (5 days). It's a wedding?

  If you encounter this flicker, then the next troubleshooting step is to restore from a backup. If the behavior persists after the restore, then the last step is the factory restore. If after the factory restore and adding no additional content, you see always this problem, then you must make an appointment at the Genius Bar to the nearest Apple store or service provider authorized Apple to have the material examined. If the behavior goes after the factory restore, then sync again your content manually, without using the backup. It seems to me it's corrupted content in the backup.

  Restore your device from an iCloud or iTunes backup - Apple Support

  Use iTunes to restore your iPhone, iPad or iPod settings - Apple Support

• Restoration of old keychain after resetting the default keychain

  Restoration of old keychain after resetting the default keychain.

  I have "reset my default keychain" in Keychain Access after learning that he was the new version of "first aid" on the update OS X El Capitan.

  He said that a new keychain will be saved by default and moved my old side (but not deleted)

  I want to restore my old bunch who was moved aside but can't seem to find all the information on how to do it.

  Thank you very much

  Elliot

  The old keychain must be in ~/Library/keychains.  Rename the old keychain back to login.keychain.  If you do not know the password for the keychain of old connection then you will not be able to unlock it.  The old login Keychain password is different from the user account password, you'll want to change the corresponding password.

  

• Can not reset the NVRAM 10.11.2?

  I can not reset NVRAM with the command + Option + P + R keys since I am under 10.11.2.

  When you use the command + Option + P + R that opens the window of recovery?

  An idea for new reset the NVRAM of the keyboard as before

  Thank you

  pwhy

  The operating system is not relevant to reset the NVRAM since the reset occurs before the OS is loaded again.  Try making sure that all four keys are pressed at the same time and kept pressed until the startup chime once and the computer is automatically restarted.

• How to reset the button incase they click New to create the same effect?

  OK guys,

  So im at a stop of triggers on the timeline, EX: sym.stop (1000);

  Then I'm animating a click on an element div/EX function:

  SYM.$("Rectangle2Copy23"). Animate({left:'3px',height:'77'});)

  How to reset the button incase they click New to create the same effect?

  Instead the object does nothing because it is already in position.

  I would go back to its original position and recreate the same effect.

  Problem is that the timeline stops... even if I go to another point in the timeline panel

  the last position assigned by the rest effect, I want to reset it even on the same point on the timeline...

  Thank you

  First of all, you need to upgrade your board animate to 2014.1.1 to open the membership re-shared, and

  then check this out:

  Dropbox - Archive_upgraded.rar

  Note: I added jquery explicitly for use. animate(), like the last Animate edge has no dependency on jQuery.

  HTH,

  Vivekuma

• Move the user off the system disk folders? Envy of all the data on E, so need to move directories user E. not individually, but in the world. If all new users, I create will have their user and docs folder on E.

  Got a new laptop with win 7 home premium pre-installed. Using the language of win 7... I have decreased the volume of HDD to 55 GB.  Made new simple volumes. I want all the data personal on E, so need to move user directories to E. No individually change the location tab on dozens of files, but in the world. If all new users, I create will have their user and docs folder on E from the gitgo.

  Under XP, I could just change the 'My Documents' link on each desktop, go to the e. * instead of c *. *, but with win7?

  As a Windows Home Server and most wise OS facilities, the system drive is isolated and a drive of 2 or 3 for everything else.  Get a problem? Just restore the system drive.

  You need the answer?

  Thank you
  Tom
  PS Microsoft: This backup/do imaging software, why don't we name the image so many can all be stored on easily in one place without having to go and rename it or move them elsewhere?

  Hello TomZork,

  Thanks for posting on the Microsoft answers Forum.

  In another forum, I found the instructions to move folders of users to another drive.
  You can follow the post here. This is attributed to Jimmie R. Houts.

  Article:
  You can move the entire folder C:\Users to another drive quite easily once windows is installed:

  1. Boot from the installation media and access the command prompt (I think you need to click on fix everything first)
  2. Use Robocopy to copy C:\Users to D:\Users: robocopy c:\Users d:\Users /mir /xj
     a. /mir says robocopy to mirror directories, this will copy all files and permissions
     b. /xj is very important, it means robocopy does not follow the points of junction. If you forget this, you will have a lot of trouble.
  3. Make sure that the files copied successfully
  4. Delete c:\Users
  5. Create the junction pointing d:\Users: mklink /d c:\Users d:\Users

  That's all. I used this process for Vista RTM with no problems.

  Here's an article that explains as well. Just use robocopy instead of xcopy as it does in the article in order to avoid possible ntfs permissions problems.

  Update: because I discovered the hard way, I thought I would mention also that if you plan on switching "Program Data", or "Program Files" with this method, you will be disappointed to know that everything works as expected, but the windows updates will install is no longer. I don't know if this problem has been fixed in Win 7.

  With the foregoing, it is not a Microsoft forum or Web site so you will have to use at your own risk. I also recommend to do a system restore point before making any changes in directories that you can then go back to a previous state.

  Please reply back and let us know if these suggestions help you to solve your problem, then to benefit others.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• After update, the display text of all my PDF files is not clear (I mean not not strong)! Any suggestion?

  After update, the display text of all my PDF files is not clear (I mean not not strong)! Any suggestion?

  Hello

  Please tell the Reader/Acrobat version you use.

  Also say work on the operating system.

  You can try the next step and see if that helps.

  Launch Reader/Acrobat > Navigate to Edit > preferences > Page Display > rendering > smooth text choose to monitor and click OK.

  See if that helps.

  Concerning

  Sukrit diallo

• I just thought that I added 8 images to my library and it turns a license all. Very delicate! so bummed that I have there is one I want to use and 8 of my images! Can I please everything reset and start over? All new, so this summer

  I just thought that I added 8 images to my library and it turns a license all. Very delicate! so bummed that I have there is one I want to use and 8 of my images! Can I please everything reset and start over? All new, so this was a first time horrible user experience!

  Hello

  I'm afraid, it is not possible to reset anything, once an image has been authorized.  As a gesture of goodwill, I added 7 license credits to your account to replace those allowed by mistake.

  Thank you

  Bev

• SQL Loader - ignore the lines with "rejected - all null columns."

  Hello

  Please see the attached log file. Also joined the table creation script, data file and the bad and throw the files after execution.

  Sqlldr customer in the version of Windows-

  SQL * Loader: release 11.2.0.1.0 - Production

  The CTL file has two clauses INTO TABLE due to the nature of the data. The data presented are a subset of data in the real world file. We are only interested in the lines with the word "Index" in the first column.

  The problem we need to do face is, according to paragraph INTO TABLE appears first in the corresponding CTL lines file to the WHEN CLAUSE it would insert and the rest get discarded.

  1. statement of Create table : create table dummy_load (varchar2 (30) name, number, date of effdate);

  2. data file to simulate this issue contains the lines below 10. Save this as name.dat. The intention is to load all of the rows in a CTL file. The actual file would have additional lines before and after these lines that can be discarded.

  H15T1Y Index | 2. 19/01/2016 |

  H15T2Y Index | 2. 19/01/2016 |

  H15T3Y Index | 2. 19/01/2016 |

  H15T5Y Index | 2. 19/01/2016 |

  H15T7Y Index | 2. 19/01/2016 |

  H15T10Y Index | 2. 19/01/2016 |

  CPDR9AAC Index | 2. 15/01/2016 |

  MOODCAVG Index | 2. 15/01/2016 |

  H15TXXX Index | 2. 15/01/2016 |

  H15TXXX Index | 2. 15/01/2016 |

  3. the CTL file - name.ctl

  DOWNLOAD THE DATA

  ADD

  IN THE TABLE dummy_load

  WHEN (09:13) = "Index".

  TRAILING NULLCOLS

  (

  COMPLETED name BY ' | ',.

  rate TERMINATED BY ' | '.

  COMPLETED effdate BY ' | '. ' TO_DATE (: effdate, "MM/DD/YYYY").

  )

  IN THE TABLE dummy_load

  WHEN (08:12) = "Index".

  TRAILING NULLCOLS

  (

  COMPLETED name BY ' | ',.

  rate TERMINATED BY ' | '.

  COMPLETED effdate BY ' | '. ' TO_DATE (: effdate, "MM/DD/YYYY").

  )

  invoke SQL loader in a file-> beats

  C:\Oracle\product\11.2.0\client\bin\sqlldr USERID = myid/[email protected] CONTROL=C:\temp\t\name.ctl BAD=C:\temp\t\name_bad.dat LOG=C:\temp\t\name_log.dat DISCARD=C:\temp\t\name_disc.dat DATA=C:\temp\t\name.dat

  Once this is run, the following text appears in the log file (excerpt):

  Table DUMMY_LOAD, charged when 09:13 = 0X496e646578 ('Index' character)

  Insert the option in effect for this table: APPEND

  TRAILING NULLCOLS option in effect

  Column Position Len term Encl. Datatype name

  ------------------------------ ---------- ----- ---- ---- ---------------------

  NAME                                FIRST     *   |       CHARACTER

  RATE                                 NEXT     *   |       CHARACTER

  EFFDATE NEXT * |       CHARACTER

  SQL string for the column: ' TO_DATE (: effdate, "MM/DD/YYYY").

  Table DUMMY_LOAD, charged when 08:12 = 0X496e646578 ('Index' character)

  Insert the option in effect for this table: APPEND

  TRAILING NULLCOLS option in effect

  Column Position Len term Encl. Datatype name

  ------------------------------ ---------- ----- ---- ---- ---------------------

  NAME                                 NEXT     *   |       CHARACTER

  RATE                                 NEXT     *   |       CHARACTER

  EFFDATE NEXT * |       CHARACTER

  SQL string for the column: ' TO_DATE (: effdate, "MM/DD/YYYY").

  Record 1: Ignored - all null columns.

  Sheet 2: Cast - all null columns.

  Record 3: Ignored - all null columns.

  Record 4: Ignored - all null columns.

  Sheet 5: Cast - all null columns.

  Sheet 7: Discarded - failed all WHEN clauses.

  Sheet 8: Discarded - failed all WHEN clauses.

  File 9: Discarded - failed all WHEN clauses.

  Case 10: Discarded - failed all WHEN clauses.

  Table DUMMY_LOAD:

  1 row loaded successfully.

  0 rows not loaded due to data errors.

  9 lines not loading because all WHEN clauses were failed.

  0 rows not populated because all fields are null.

  Table DUMMY_LOAD:

  0 rows successfully loaded.

  0 rows not loaded due to data errors.

  5 rows not loading because all WHEN clauses were failed.

  5 rows not populated because all fields are null.

  
  

  The bad file is empty. The discard file has the following

  H15T1Y Index | 2. 19/01/2016 |

  H15T2Y Index | 2. 19/01/2016 |

  H15T3Y Index | 2. 19/01/2016 |

  H15T5Y Index | 2. 19/01/2016 |

  H15T7Y Index | 2. 19/01/2016 |

  CPDR9AAC Index | 2. 15/01/2016 |

  MOODCAVG Index | 2. 15/01/2016 |

  H15TXXX Index | 2. 15/01/2016 |

  H15TXXX Index | 2. 15/01/2016 |

  
  

  Based on the understanding of the instructions in the CTL file, ideally the first 6 rows will have been inserted into the table. Instead the table comes from the line 6' th.

  NAME	RATE	EFFDATE
  H15T10Y Index	2	January 19, 2016

  
  

  
  

  If the INTO TABLE clauses were put in the CTL file, then the first 5 rows are inserted and the rest are in the discard file. The line 6' th would have a ""rejected - all columns null. "in the log file. "

  
  

  Could someone please take a look and advise? My apologies that the files cannot be attached.
  

  Unless you tell it otherwise, SQL * Loader assumes that each later in the table and what clause after the first back in the position where the previous left off.  If you want to start at the beginning of the line every time, then you need to reset the position using position (1) with the first column, as shown below.  Position on the first using is optional.

  DOWNLOAD THE DATA

  ADD

  IN THE TABLE dummy_load

  WHEN (09:13) = "Index".

  TRAILING NULLCOLS

  (

  name POSITION (1) TERMINATED BY ' | '.

  rate TERMINATED BY ' | '.

  COMPLETED effdate BY ' | '. ' TO_DATE (: effdate, "MM/DD/YYYY").

  )

  IN THE TABLE dummy_load

  WHEN (08:12) = "Index".

  TRAILING NULLCOLS

  (

  name POSITION (1) TERMINATED BY ' | '.

  rate TERMINATED BY ' | '.

  COMPLETED effdate BY ' | '. ' TO_DATE (: effdate, "MM/DD/YYYY").

  )

• After resetting the iPad to default it show that the power cord is trying to connect to iTunes

  I got an iPad 16 GB factory reset default after a while display only the power cord going to iTunes, need help to get this operational back, it worked Ok before resetting all we have tried to make clear the former owner information

  The iTunes icon and cable image means he went into recovery mode, you will need to connect it to iTunes to your computer to reset the iPad, and you can then restore/resync your content.

  If the previous owner had not disconnected from the settings > iCloud on it and find my iPad has been activated, you will need to communicate with him or her: disable find them my iPhone Activation Lock - Apple Support

• RESET THE NVRAM

  How do reset you the NVRAM?  I can't find it in the HELPER function.

  Restart with the Option keys, command, P and R keys. Release them after the second ring.

  (141213)

• How can I restore my passwords in the keychain after resetting the PRAM?

  I have reset my PRAM on my iMac 24 "after some wobbly behavior.  Everything is going well except that all my saved passwords in Safari are gone.  Can I get back them?  Where should I look?

  Reset the PRAM should have no impact on your Safari passwords. I would recommend realized a report of EtreCheck and announcement to your response to this message. Simply click on the link, download the application and view the results of the report in your response to this message. The report will indicate any question obvious cause of your problems.

  If you want to learn more about EtreCheck, please click on the link.

• Historical data for missing Lifelog after resetting the software and restore

  Hello

  I used lifelog with sony account for one year. Two weeks ago, I sent my cell phone from Z3 to solve the problem of speaker. Before gaving the phone I save the data with the company Sony PC with all the options checked and reset the phone.

  After the fixed number, I restored the phone. Now I tried to lifelog of logon with the account of sony, and he says no account found. I'm doing a loss all records in history.

  I would like to have the records. Is it possible get it back my backup? I really hope I could have those back, would be very grateful for help.

  hosais

  You are probably using a different account, the data, it is stored with Sony servers, so even if the factory reset you phone or change phones, you can synchronize your data.

• Win 7 rejecting all new software as incompatible

  I just bought a new computer with WINDOWS 7.  I already have a laptop.  Both machines use the same version of windows.  The new box won't let me install software.  My laptop has no such qualms.  My first message is that the software in question is not compatible with the current version of windows - obviously not true since I don't have the software on my laptop.  When I try to run the software as an administrator, Windows tells me that I need to check if the software is compatible with Win 7 premium.   Again, it is the case.  I checked almost everything in the help and online

  Some people have problems with the individual software.  My problem is that win 7 64 bit rejects all the software I try to load.  Because I don't have broadband at home, the software is loaded on a USB key.

  Help please.

  I have to admit that this error was not related to Windows 7.  It turned out that the USB to which I was downloading my software has been altered.  Once I switched to another USB key, software installation went well.  I download my software at the local library, because Verizon WIRELESS has the download limit.  This machine is an office which is not portable, I think this problem is resolved.

  Thanks a lot for your review.
  Tonyz906

• Pavilion dv7: no internet after resetting the computer

  I don't know if I am posting this in the right advice.  I had to do a reset on my Pavilion dv7 laptop, kept my personal files, but now I can't access the Internet.  It shows that I am connected to my wireless network, but I can't go to all the websites that I go into my browser.  I went to Device Manager and went to network adapters.  I can say that the driver works fine and I don't see the warnings or errors on other drivers in Device Manager.  I am at a loss of what to so any help would be appreciated.

  Hey @Esoxdiver,

  I understand that you are experiencing you encounter some difficulties to connect your laptop in WiFi and I want to help.

  Here is a list of steps that solve common problems with wireless connectivity.

  First of all, we have a step by step guide to guide you through the process of diagnosis here:
  Troubleshooting your wireless network and Internet access

  A second option is to try the following steps:
  Network power cycle:
  1. turn off your laptop.
  2. unplug the power to your router.
  3. disconnect the power to your modem.
  4. wait at least 45 seconds.
  5 reconnect the modem and wait for it to come back online.
  6 plug in the router and wait for it to come back online.
  7. turn on your laptop and test your connection.
  
  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.
  
  Reset the TCP/IP settings on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.
  
  It can also help to reset the winsock catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.
  
  Reinstall the NIC drivers:
  1. download the drivers from here , but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.
  
  Test an Ethernet connection:
  Explicit. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.
  
  Test another connection:
  Many people excluded their home network as a problem if another device working on the same network. Networking is not as simple as that. Each device interacts differently with your router or modem and it is impossible to exclude the settings for this device until the laptop has been tested on another network.
  
  If these steps do not resolve the problem, try this document published by Microsoft for network management issues: wired and wireless network problems. You can change the operating system with the drop-down menu in the upper right corner of the document.

  The above steps are presented by @Great-Christine-Tree

  I hope this helps. If so, please hit the Thumbs Up and accept as a Solution.

  See you soon,.

  TechSurge.