Win 7 rejecting all new software as incompatible

Similar Questions

• After resetting the NVRAM C309a rejected all new cartridges

  How to fix c309a after resetting the NVRAM rejected all new cartridges, for an ox610000fb mistake made semi nvram reset done

  after reboot, asking all the cartridges to replace? help is appreciated.

  Unfortunately, I think that the printer is irredeemably right now especially if you did a reset full semi and still get an alphanumeric message. I have a document that I can link to for you on the error codes alphanumeric on this printer, which I will give you. But at this point, you must call to HP Total Care for assistance. Here is the link to this document.

• HP all-in-one 5610 model: All in One 5610, problem loading new software for Windows 8.1

  Hi, just bought new HP computer with 8.1 widows, my all-in-one 5610 has been working fine on the old Windows XP.  Installation of new software 8.1 system HP I get unknown device (configuration descriptor request failed). As for the USB controller get Windows has stopped this device because it has reported problems Code 43. Thnks for any help you can give.

  Hi @Joe62 and welcome to the Forums of HP!

  I understand that you get code 43 error. I'd be happy to help you!

  I recommend to check this page from Microsoft on Code 43: Windows has stopped this device because it has reported problems.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• I'm moving the standard Acrobat XI to a new computer, but the downloaded software seems incompatible with my serial number.  Help

  I'm moving the standard Acrobat XI to a new computer, but the downloaded software seems incompatible with my serial number.  Help

  your serial number is 6 groups of 4 numbers, find the serial number of your product Adobe quickly

• Had upgraded LR 4 to 6 a few months ago.  Have updated all the software and am running LR 6.4 and 9.4 Raw.  Mac also improved to 10.11.3 software.  Camera not too new... Nikon D800e.  Always make me "files have been imported because they couldn't"

  Had upgraded LR 4 to 6 a few months ago.  Have updated all the software and am running LR 6.4 and 9.4 Raw.  Mac also improved to 10.11.3 software.  Camera not too new... Nikon D800e.  Always make me the note 'files were imported not because they could not be read ".  Any thoughts?  Thank you

  This means that you don't have WRITE permission in the destination folder.

  You should:

  1. In Lightroom, determine the exact destination folder (it is on the right side of the import dialog box under Destination)
  2. Change the permissions in your operating system on this specific file WRITE permission; OR Change the destination folder in a place where you don't have WRITE permission

• I just pass the parameters and software my PowerBook has a new Mac Pro. All CC software download is here and work, with the exception of the CC and there is no way to install.

  I just upgraded the software and settings, include CC, of my PowerBook for a new Mac Pro. All CC software download is here and work, with the exception of the CC and there is no way to install. I try because whenever I restar keep bothering asking for installation, (by the way, the link is not updated). You will appreciate your help.

  never migrate adobe software.  It must be properly installed.

  Uninstall all the programs of cc you can, clean and reinstall then by, use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

• We need to get the new software we ix2-200 NAS new computers-Win 7 64 bit, old XP32 bit

  Hi everyone;

  Our company's new computers and they will be Windows 7 64 bit. We currently use XP with 32 bits. Do we need new software to connect to ix2 - 200 or the software that accompanies if will be good. Thanks for you help and have a great weekend.

  Hello Raym0nd69,

  There isn't any software owner to access the ix2.

  They run out of network/Internet protocols.

  as long as you have the IP address you can access the user interface, and as long as you map the actions you should be able to access the data.

• I have a touchsmart IQ 820es and you just win 8 in English. new installation, no problem?

  Hi, my machine is a touchsmart IQ 820es equipped of Vista in Spanish, I bought 8 pro victory but on the verification of the conditions weather model will take, it says there is no driver available for this product. I don't want to lose all of the bios and drivers more touch ability.  Are there ways of installing win 8 with all the necessary software.

  Disk is partitioned with backup from vista. Should I delete this and start a new installation.

  Thanks for any help.

  Stan

  Hi stannor,

  HP likely will not win 8 drivers for your PC, but this does not mean that win 8 will not work on your PC. I have personally updated two TouchSmarts who do not ' have HP drivers and I was able to get both. Just make sure that you have just system recovery disks in case something goes wrong and you want to go back to the original software.

  If after the upgrade, you have a few driver problems, Windows 8 has a feature that creates its own driver for some devices. If the device does not work, uninstall all driver software and remove the device from Device Manager. Shut down the PC and wait 3-5 minutes. Then reboot and Windows will be attmpt to create its own driver for the device. Also, could you post your questions on the forums and we can maybe help you.

• Move the user off the system disk folders? Envy of all the data on E, so need to move directories user E. not individually, but in the world. If all new users, I create will have their user and docs folder on E.

  Got a new laptop with win 7 home premium pre-installed. Using the language of win 7... I have decreased the volume of HDD to 55 GB.  Made new simple volumes. I want all the data personal on E, so need to move user directories to E. No individually change the location tab on dozens of files, but in the world. If all new users, I create will have their user and docs folder on E from the gitgo.

  Under XP, I could just change the 'My Documents' link on each desktop, go to the e. * instead of c *. *, but with win7?

  As a Windows Home Server and most wise OS facilities, the system drive is isolated and a drive of 2 or 3 for everything else.  Get a problem? Just restore the system drive.

  You need the answer?

  Thank you
  Tom
  PS Microsoft: This backup/do imaging software, why don't we name the image so many can all be stored on easily in one place without having to go and rename it or move them elsewhere?

  Hello TomZork,

  Thanks for posting on the Microsoft answers Forum.

  In another forum, I found the instructions to move folders of users to another drive.
  You can follow the post here. This is attributed to Jimmie R. Houts.

  Article:
  You can move the entire folder C:\Users to another drive quite easily once windows is installed:

  1. Boot from the installation media and access the command prompt (I think you need to click on fix everything first)
  2. Use Robocopy to copy C:\Users to D:\Users: robocopy c:\Users d:\Users /mir /xj
     a. /mir says robocopy to mirror directories, this will copy all files and permissions
     b. /xj is very important, it means robocopy does not follow the points of junction. If you forget this, you will have a lot of trouble.
  3. Make sure that the files copied successfully
  4. Delete c:\Users
  5. Create the junction pointing d:\Users: mklink /d c:\Users d:\Users

  That's all. I used this process for Vista RTM with no problems.

  Here's an article that explains as well. Just use robocopy instead of xcopy as it does in the article in order to avoid possible ntfs permissions problems.

  Update: because I discovered the hard way, I thought I would mention also that if you plan on switching "Program Data", or "Program Files" with this method, you will be disappointed to know that everything works as expected, but the windows updates will install is no longer. I don't know if this problem has been fixed in Win 7.

  With the foregoing, it is not a Microsoft forum or Web site so you will have to use at your own risk. I also recommend to do a system restore point before making any changes in directories that you can then go back to a previous state.

  Please reply back and let us know if these suggestions help you to solve your problem, then to benefit others.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I downloaded the new software recently and now my Epsom printer does not work

  iMac late 2009. Processor 3.06 GHz

  Hi, I downloaded the new software recently and now my Epsom printer does not work and my Wi - Fi on the computer keeps dropping out.

  I spoke with Epsom and they recommended to remove the drivers and reinstall them. Now, I can not install the ad pilots Wi - Fi does not work correctly. The research on this forum I see there have been many problems with the new version of the software. Can someone help me?

  < re-titled by host >

  Try a reboot.

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode - on El Capitan

  Start Mode without failure-El Capitan.

• New software download Iphone4s

  I have an iPhone 4 s and tried to download the new software, asked to attach the phone to iTunes, this is not possible as long as no access to do it, I can get around this at all? Phobell joint

  This article may help:

  If you are unable to update or restore your iPhone, iPad or iPod touch - Apple supports

  especially in step 1: If you don't have a computer, borrow one from a friend or go to an Apple Store or Apple authorized service provider for assistance.

  I doubt that you can work around it, but you can try without connecting to iTunes if you really want to step 2.

• -win 7 64 - all versions of Firefox (tested 17-20.b) keep crashing except if used in compatibility XP sp3

  Since yesterday my firefox crashes, sometimes I have the option to reset firefox or start in safe mode. Using only the mode without failure of firefox works fine (but without plugins/addons)

  So I did a fresh reinstall (No Add ons etc) thought to solve the problem.
  I was using v19 when all this happened so retrograde to v17 hoping to fix it.
  Now, I tried to v20b v17 and all keep crashing when used "normally".
  After the new installation I have more the possibility to use the firefox safe.

  If my recollection is correct, I had a few Java Update at the time of the first collision. I also tried to use the automatic update of win7, but those failed.
  I therefore also uninstalled all java components, installed fresh firefox and tried to start firefox, before and after reinstalling java.

  in all situations is immediately crashes.

  The only way to make firefox work now uses the Windows XP (sp3) to windows compatibility.

  I have no system restore points win7, so there is no option to use.
  All other software (and browser) work very well... only firefox crashes all the time.

  How to solve this problem?
  I looked around and followed all the suggestions I found on topics somewhat related to mine, but nothing works.

  Here is my latest 5 crash reports:

  BP-5c91d587-5e12-4078-8046-0d7ca2130305

  BP-f4292032-9AB9-4682-ac42-3fcaa2130305

  BP-4e56b119-5B52-46b5-A163-174592130305

  BP-921cd557-b2ee-4159-8e29-cd9af2130305

  BP-f9cb9b6c-b4ee-4835-8c2b-b17122130305

  and two yesterday before I the freshly installed firefox

  592a429a-2cf5-4CE6-8538-288612130305

  fd534141-B87A-4BDF-AF98-2d11e2130305

  Disable hardware acceleration, that does not work? Disabling hardware acceleration

• Operating system preinstalled on all new Satellite C850 - 14 c is in Finnish

  It is a strange problem. My brother has recently ordered a new laptop C850 - 14 c and it arrived by mail direct from the warehouse. When it out of the box, she had a UK Plug and a UK keyboard (we are in England), but when it was starting up it was all in Finnish! Is Windows 7 and all the software is provided. The indicator of keyboard in the status bar in down options STANDARD (for England and the Australia), FI - Finland and MK - (former Yugoslav of Macedonia).

  I was wondering if there was some sort of option 'dual boot' to start in different languages, but I did not fall on something like this in this forum. So I checked the serial number on the Support from Toshiba page, who correctly identified it as a C850 - 14 c with Windows 64-bit Home Premium edition SP1, but the language was not English but "NH".

  Someone met by this kind of thing before? He will probably have to return the machine to get a warranty replacement, but wanted to know if he was missing something obvious before he sent again.

  There is probably a mistake. Return it to the seller as soon as possible and ask for replacement.
  By the way: can you please post part of exact model number?

  You can find it at the bottom of the thumbnail of Toshiba. It must be something with PSKC9E-01xxxxx.

• How to disable the new software alerts

  Every once in a while, I get a window pop up on my screen, announcing that the new software updates are available for my computer. My action options are limited - download all, remind me later, and one more. These alerts are a nuiscance for me. Is it possible to disable them?

  Thanks for your help.

  System of preferences/App Store and uncheck automatically updates.

• Video error on Qosmio G10 since the new software

  Hello world

  I have a problem with my MCE LiveTV. When I want to watch live TV, then always comes this error:

  "Error video - files neede to display video are not installed or not working not properly." Please restart Media Center or restart the computer.
  When I follow this order, nothing changes.

  I have this problem since I installed new software on my Qosmio G10 yesterday. It's called Magix Video deLuxe 2005/2006. When I uninstalled the new software, Live TV still does not work.
  It only works when I have sett my computer back to the time where I have not yet installed Magix Video deLuxe. But then I can't use the new software.
  I also tried to reinstalled the video driver and the TV Tuner, but the error is still there.

  What can I do now? Please help me

  I would say that the software that you install is not compatible with Windows MCE. It is possible and the cause likley. If you have all updates for windows and Magix Video and it still does not work then the problem is with the software application and the no compatibility. The fact that it works before and after roll you back OS proves it.

  What are you actually trying to do with the Magix software that Windows can't do?