After restart of 2 of our servers ESX 3.5 - 110268 the console or VMS are inaccessible
Hi all
We've had this problem for a year now, and we assume that when we fixed a server that was causing the problem in these two places (Singapore and London). However, we have since discovered that just reboot the server causes as well. So I'll try to find a solution if we do not have to have the car of people for hours to get physically on the server to resolve the problem. I wish the problem more in detail now.
In London, we have an HP Proliant DL380 G3, with a NETWORK NC7781 card, which has 2 ports (vmnic0 and vmnic1) connected to vSwitch0 (which is the Port of the VM - DataCenterLAN)
In Singapore, we have an HP Proliant DL 380 G4, with a NETWORK NC7782 card, which has a port (vmnic5) connected to vSwitch4 (which is the Service Console Port - Legacy eth0)
During the reboot of these machines are for some reason, the tg3 driver does not load properly and causes the switches above to lose the connection. In London, I can at least PuTTY in and solve the problem, but to Singapore, it's the Console port that breaks down, making it impossible for me to connect, so get hold of local people, and they can take less 2 hours and up to a few days to get there.
What I have to do is run the following commands
esxcfg-module d tg3
esxcfg-module e - tg3
vmkload_mod u tg3
vmkload_mod tg3
in London I can go to VIC - Configuration - networking and readd the vmnic on the Virtual Machine Port
In Singapore, I have the most local support to run these 2 commands as well.
esxcfg-vswitch - L vmnic5 vSwitch4
and then
esxcfg-vswitch - M eth0 vSwitch4 Legacy\ Pei vmnic5
Why is happening. We have a few other machines that I expect to have the same problem, based on the type of computer and network cards, but they did not. The only thing these two have in common is that they are both among the first ESX boxes, we have deployed and they have been upgraded to version 2.5.2 and 2.5.3. We had 2 other machines that have been in our Dev environment which were identical, but they did not have this problem, but they are local to us and not in another country and one-third of the way around the world.
If there is not a direct solution, is there a way to put something in place so that the controls can run on startup or reboot?
Thank you
Steven Stuart
If nothing else, you can put orders in /etc/rc.local as if entered you them in the command line. It will keep you in suspense when / if another number arrises. If you have the time, it may be interesting a relocation for strange topics such as this one.
-KjB
VMware vExpert
Tags: VMware
Similar Questions
-
original title: Auto Adjust
Hello.
Whenever we start to use our computer, the screen goes black and the message 'Auto adjust is in Prgress'. Then, all of our screen is small and all the icons and pages are smaller than before.
I tried restoring the system that works and that gets our screen back to normal but every day that this Auto setting is coming and we can't seem to stop it.
Any help would be appreciated... Thank you
Try this:
Go to the Web site of the manufacturer of your laptop computer-graphics/computer card > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.
Then:
http://Windows.Microsoft.com/en-AU/Windows-Vista/change-screen-resolution
Change the screen resolution
Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.
See you soon.
Mick Murphy - Microsoft partner
-
Why VMS are inaccessible after change of data store?
Hello
I have two ESX 3.5 running servers that share two disks of SAN. I moved files VM of all virtual machines of a SAN disk to another disk of SAN using vCenter server. After you move these files, I am unable to work with virtual machines (unable to start virtual machines). I rebooted an ESX Server after you move the files from the virtual computer. In vCenter server, I can see that virtual machines are inaccessible. I have attached the screenshot of the vCenter client application.
For the other ESX Server (which I have not re started after moving the VM files) VM is available, but if I try to start this virtual machine, I get an error saying
*' A general error occurred: the system returned an error. " Communication with the computer may have been interrupted. » *
I am also attaching the screenshot of this error.
When I installed ESX Server for the first time, I had created virtual machines on ESX Server's hard drive only. After that, I moved files VM to ESX from disc to disc shared in SAN.
Anyone know what's the problem?
Inaccessible VM may be due to different reasons. So, it depends on how you migrated virtual machine between the data store. If vmx and vmdk files are not accessible from storage, then you see this error message. Otherwise, check that all the files on a virtual computer has been moved to the single data store and there is no file delta left behind. This happens if the migration is not complete.
If you see a delta file, then clone a new vmdk with "vmkfstools-i" and fix it with VM and try again to power.
Anuj Modi,
If you have found my reply to be useful, feel free to mark it as useful or Correct.
The latest articles and articles about Virtualization:
-
Why our servers IP address is on the black list of hotmail?
Please our IP 212.118.23.45 from your black list could you help me
Thank you
jiad khlifat
Contact your ISP. They control the IP addresses and will incur any contact.
-
Unable to connect to the console of the virtual computer after dns change
I finished just change of my VM and VC servers esx hosts to use the new dns servers. In addition the area changed as follows
from vm1.subdom1.xxx.com to vm1.subdom2.xxx.com the esx hosts and vCenter server all underwent this change at the same time although ip addresses have remained the same.
In vCenter but I do not see "cannot connect to MKS: address for server vm1subdom1.xxx.com host lookup failed: no host is unknown.»
If I log into the esx vSphere Client with server can't connect to the console where I can say vCenter to use the new name of the virtual machine instead of the old host? I can ping and resolve the vm from the vCenter server and RDP to DNS so it works but vCenter is still going to the old address.
Any help?
To access the Console of the virtual machines... the vCenter does not really rely on the DNS config. It communicates only through ports 902/903
This problem could have arisen due to some misconfig while changing the DNS... .pls try below
Remove and re-add the vCenter ESX Server
Restart the ESX management services... #Service mgmt-vmware restart
-All the best
-
The "Console" tab fails on servers on a host ESX Server 3.5.0
Hello
On one of our server VMware ESX 3.5.0 123630 hosts, I get an error message when I try to use the "Console" tab on the servers located on the ESX Server.
The error message "unable to connect to the host esx006.sb.local: a connection attempt fails, because the connected party did not properly after a period or the connection failed because the connected host has failed."
This ESX Server is configured as all the other ESX servers in our environment, so I don't understand why it does not work on the ESX Server.
I have no problems connecting to the ESX Server and I have no problems connecting to servers through the mstsc.
I have the following VMware Infrastructure customers installed on my computer:
-VMware Infrastructure Client 2.5
-VMware Virtual Infrastructure Client 2.0
-VMware vSphere Client 4.1
To connect to the above mensioned ESX Server, I use the client "VMware Infrastructure Client, Version 2.5.0 Build 147704".
Can you help me solve this mystery?
Kind regards
Carl-Marius
Hi still =)
Sorry, that you're still having problems... I hope that we will get there in the end!
In any case, take a look at the following site, there is a solution out there that can help (it's certainly worked for several!) people who added to comments
Please try this and let me know how you go.
See you soon
Waffle
-
Three servers esx or two esx servers?
We currently have three esx (dual dual-core, 16 GB) servers that are connected to a network of Hitachi SAN. We are trying to replace these servers with replacements and we have two options to meet our requirements about 12 GHz of CPU and 64 GB. We run around 20 virtual machines that are a combination of windows servers running exchange and file and print and redhat running oracle and jboss.
Option 1: 2 x superiors servers dual QuadCore with 32 GB each
Option 2: 3 x lower servers dual QuadCore with 24 GB each
Both servers are the same model but different specifications, one is a high-end server. Three servers operate at about 20% cheaper.
We will reuse the FC HBA, we have already three ESX licenses and we manage servers using VC, so there is no additional cost to the three servers (except the maintenance cost each year on an esx server).
The advantages I see to have three servers are;
12 hearts as opposed to 8 cores
redundancy n + 2 for base servers
66% of capacity left after a failure instead of 50%
servers cheaper and cheaper maintenance as collateral can be reduced by one day to the next
more easy upgrades to new versions of esx server can be taken offline and still leave redundancy
bandwidth of 50% has increased to SAN
bandwidth increased by 50% to network (18 versus 12 NIC NIC
I really don't see any downsides to having three servers?
My boss however like the idea of two servers and I need to convince him, if anyone has information that would help in my case I'd be very happy.
On the surface, it's easy to say, come on 3 Server... as you well pointed out the technical benefits. However, it is easy to underestimate the cost of this 3rd server. Of course, you have a sunk cost in the Vmware licensing, but you again year 2 and 3 cost. It is the same with the server, support costs for 3 years, power and cooling for another 3 years etc.
This probably isn't a huge number, but your boss is probably thinking in this direction. Maybe you need to hit a quick worksheet to calculate these costs, and then compare these costs and benefits that you mentioned. Until you do this, your boss will probably have his way
I would focus on availability and additional capabilities. Capacity is easy to align costs, so start there. The availability is important, but more difficult to quantify.
Good luck.
Dave
-
VMkernel no longer works after restart
Hello
I have some problems using VMotion.
Here is our configuration:
-2 servers ESX Infrastructure 3.5;
-on each server, we have 2 redundant interfaces (was and B) for the default network connection (iSCSI + VMs: she will be cut in half later with another network card);
-on each server, we have 2 redundant (C and D) interfaces for VMotion which are connected directly to another ESX;
-2 servers are added to a data center with vCenter (HA and DRS active);
-as a result, on each server, we have a virtual switch with a VMkernel and the default network Service Console (0: hasB) and another for VMotion (1: CD).
Our problem is the following. When restart us one or two servers the VMkernel does not work anymore. Both servers ping between them on the interface of VMotion, but vmkping does not work. Finally, remove us the vSwitch1 and recreate it with the same breaks randomly on one of the parameters, and it seems to fix the problem.
We tried to repeat the same scenario several times and we get the same problem each time.
We look at /var/log/boot.log and/var/log/vmkernel and, for us, there is no problem.
Any idea?
1 test = Test VMotion with own vswitch and 1 NIC (two guests)
I would start by removing the vSwitch1 and all groups of associated ports. Create a new vswitch. Under this vswitch, create a port vkernel group. Call the VMotion (just to identify him only). Select the vmotion on it. Add only vmnic2 to the vswitch. Hardcode than NIC to 1000 Full. If this configuration works, you're laughing. Add the second group of ports for the "Service Console 2" and test again. If adding the vmnic1 it breaks, it is the cause. I would start by following these recommendations, rather than simply remove the network card.
I guess "vMotion Service Console" is your second service console for redundancy HA... Take it out at the moment. Simply your installer for troubleshooting. Use only a NIC personally, I don't like to create links with different cards.
Test 2 is the question of routing/network vmkernel Test.
The vmkernel to the VMKernel default gateway allows NetAppcommunications in and out of the ESX host. The VMotion uses cross over cables. If these two elements are in conflict, it may be the cause of the problem. Can you connect to the network instead of a direct cross your vmotion over cables? The vmotion network connects to should be able to use the same default gateway of vmkernel as NetApp.
Start with a simple config. If you can provide a simpler configuration for the virtual machine as local storage disks and remove the NetApp, it would be useful to remove the question from the vmkernel trace. Today, I do not use NetApp. The configured vmkernel is used for vmotion and the default gateway is the same IP address as the Group of ports of vmotion. Yes = 10.0.0.23 vmotion, def vmkernel gw is 10.0.0.23.
-
There is no volume after restarting the device. Need urgent help
Hello.
Our ReadyNAS RN31600 iSCSI target device. We have (had) two LUNS of 8 terabytes each built on X - RAID 5, which are presented on a Windows Server.
This device is less than a year, and he began to have problems today. First two LUNS disappeared from the iSCSI (WS 2008 R2) client. When we tried to restart the NAS server, he's hanging on "restart now, see you soon."
We power off of the switch and after restarting, two LUNS seem to have disappeared, and the unit is empty somehow? How to solve this problem? Or is it quite normal on the Netgear devices to suddenly lose 16 terabytes of data?
The GUI shows "there is no volume" and also "delete inactive volumes using disk. Disc # 1,2,3,4,5,6 ". This means that all the disks.
Firmware is 6.4.0.
And no, we don't have backups, because this device is used to a backup unit.
I suggest you to contact support (support.netgear.com), because I think it will be faster than from here.
-
Why do I have to restart my internet wireless connection after restart of Windows Vista?
why I have to restart my internet wireless connection after restart Vista
Hello
Second time to answer that line however initially seems to have disappeared. The message displayed
upward in my Threads as if there was a response.-----------------------------------------------------------------------------------------------------------------------------------
Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
Update your WiFi drivers on computers. How you are positioned in the router? Are there
obstacles in the path?Actually try updating your driver and disabling the network logon.
Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlDownload - SAVE - go where you put it - right click – RUN AS ADMIN.
You can download several at once however restart after the installation of each of them.
After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
manufacturer of system become your backup policies).Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
updated drivers.I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
are almost always old, and you can search drivers manually as needed.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx------------------------------------------------------
Make sure you know the details of connection to your wireless router - SSID and password.
You lose connection when you do and have to redo your logon.
Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
lower left click on merge or delete network locations - REMOVE all instances of your network (and the
others you don't use anymore) - REBOOT. Start - Connect To log on to the network.-----------------------------------------------------
Check this box:
Strange problem with Internet under Vista
http://www.catonett.com/blog/archives/194Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
http://support.Microsoft.com/kb/928233/en-us----------------------------------------------------
And:
Network connection problems
http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
mini h710p forget right SATA raid after restart?
Hello
I have trouble adding a new hard drive in my existing server. My server is R720 and with 2 virtual disk (the two 3-drive raid 5, HDD SAS)
I just want to add a SATA hard drive, so I inserted the disc at the front and Ctrl-R in the raid configuration, press F2 to create new VD and add the disk, check the initialization, and after clicking ok system the initization is completed as in 2 seconds. It all seems normal. And I pressed the ESC key to exit, System told me to Ctrl-Alt-Del... OK, very good.
However, after the restart in the startup message Raid card, it says that my newly created VD02 doesn't have the drive and will be inadequate. The exact message is:
The following virtual disks are missing: 02 If you continue (or load the configuration utility), these virtual disks will be deleted from your configuration. If you want to use them later, they will have to be imported. If you believe that these virtual disks should be present, please turn off your system and check your cables to ensure all disks are present. Press any key to continue, or 'C' to load the configuration utility.
Tried updating raid card to the latest firmware (21.3.2 - 0005), to build a raid 1 with a SATA 2 drive instead of one, replace the hard disk, build the raid using raid tool in the bios, all with the same result.
I have not installed any kind of dell openmanage.
Tried a blink and unblink disc, there is no problem. And of course I unplug the disc after the reboot.
I have once again, read the instructions and see that SAS & SATA drives are supported simultaineously, as long as they are not in the same virtual disk. What did I miss? Any help is appreciated.
It is certainly the case. Probably more so now then years... and for different reasons.
Company leads to meet SATA or SAS standards and increasingly being designed to run 24 x 7, are designed to react differently to the controllers and behave differently with regard to the maintenance of data in redundancy (standalone vs) environment.
EACH disc is designed for a specific purpose these days - some for storage of low power in a NAS capability, some to access high-performance RAID arrays, some for use Office/casual consumer, some for quick access to the database, others for a slower archival capacity. A bit of research necessary to make sure that you have the good tech for the good work. Use the Server grows in servers, NAS NAS drives, disks of desktop/laptop computer in desktop computers / cell phones, etc.
Using a player from the server as a stand-alone drive in a laptop Desk/computer is as bad to use a portable office/computer in a server... you may lack of reliability and the potential loss of data.
-
Push does not not after restarting the device?
So we have successfully implemented BlackBerry push with our Android app-focus. The application registers with RIM and receives a response of success. We register successfully the info back to our application server. Our application server send push messages to the device, they are accepted by the RIM servers and are received successfully on the device. Everything is great!
Except...
If we shut down the device or reboot the device when he returns is no longer receives pushes for the application unless that register again with RIM BPA. They are sent to the device and the same agreed before they get simply never received on the device.
What we're doing wrong? Is he expected to receive pushed back them after a reboot of the device that the user must launch our app to record with pusher? It would be really weird because a user will not necessarily start the application after each reboot.
Thanks for that bring to our attention. We have the Android Runtime search dev team in this.
As ennova2005 said, you need to unregistor/re-resistance after a reboot as a work-around. In addition, because the application does not start automatically, the application must be opened/started by the user.
Thank you
-
Problems after restarting the vAPP vCOPS
Hey there - I am under vCOPS 5.
I noticed that some VM indicated "no data" in their respective details panels... I read somewhere the restart of the service was the way to solve this problem...
At the time I was not aware of the mode of command line to restart the service (from the resumption of vcops-admin Ui box), so I right click the VAPP vCOPS itself clicked shutdown, expected some time after that he had done and he turned his back.
Tried to login using the domain name COMPLETE on the web of the said server browser is not available - redirect where possible... shortly there after it struck me to a 404 screen.
I checked in the vSphere Client IP are different and static, I then connected the box to user interface and run a summary, he showed the VM analytics from the same Ip address... so I ran the repair tool (repair vcops-admin - XXXXXXXXXXXXX ipaddress) with the address of the VM analytics... They say "fixed" after restarting the service once again, but after another analytical perspective - showed the same thing.
I read that in v1 vCOPS, it was a graphic incompatibility known - and ignore it. So-what could be the problem? Let me know (I've already checked there is disk space)
Thanks in advance for any help!
Leffingwell,
Can you check how much space is left on the partition/data of each virtual machine? the 404 error means a webservice started, but one of the DB background servers probably didn't.
If either/data is near or at 100% full, then you need to turn off the TIME... Add a new drive... power back on.
When you add a drive, take all the default settings... and preferably choose style Eager zero thick (runs faster than the other two).
Best regards
Jon Hemming
-
Blocking of data after restart of the success
Hi guys,.
I'm stuck in a process where my DB starts but after a few seconds his begins to close all processes of sorting. The system worked perfectly before but after todays restarted that's what happening.
the following is the log from start-up to shutdown. Can help them understand what is causing this problem any one.
It comes to ORACLE 11 G on LINUX business. _
Mon Aug 13 13:12:28 2012
Starting ORACLE instance (normal)
Large information Pages *.
Total shared global area in large Pages = 0 KB (0%)
Large Pages used by this instance: 0 (0 KB)
Large wide Pages unused system = 0 (0 KB) (alloc incr 16 MB)
Large Pages configured wide system = 0 (0 KB)
The Page Size = 2048 KB
RECOMMENDATION:
Total size of Global region shared is 4098 MB. For optimal performance,
before next restart of the instance, to increase the number
unused wholesale Pages by 2049 2048 Pages atleast big Ko (4098 MB)
scale to get 100% of the Shared System
Global area allocated by using large pages
***********************************************************
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Shared memory for the instance of created monitoring segment
SNA system picked latch-free 3
With the help of LOG_ARCHIVE_DEST_1 parameter value by default as USE_DB_RECOVERY_FILE_DEST
Autotune undo retention is enabled.
IMODE = BR
ILAT = 28
LICENSE_MAX_USERS = 0
SYS audit is disabled
Commissioning:
Oracle Database 11 g Release 11.2.0.3.0 - 64 bit Production.
ORACLE_HOME = /u01/app/oracle/product/11.2.0.3/db_1
Name of the system: Linux
Name of the node: OM5000
News Release: 2.6.18 - 308.el5
Version: #1 SMP kills Jan 27 17:17:51 EAST 2012
Machine: x86_64
Using the settings in client pfile /u01/app/oracle/admin/OML5K/pfile/init.ora on machine OM5000
Parameters of the system with default values:
process = 150
nls_language = "ENGLISH."
nls_territory = 'AUSTRALIA '.
SGA_TARGET = 4G
control_files = "/ u01/app/oracle/oradata/OML5K/control01.ctl".
control_files = "/ u01/app/oracle/fast_recovery_area/OML5K/control02.ctl".
DB_BLOCK_SIZE = 8192
compatible = "11.2.0.0.0."
db_recovery_file_dest = ' / u01/app/oracle/fast_recovery_area.
db_recovery_file_dest_size = 50000M
undo_tablespace = 'UNDOTBS1.
Remote_login_passwordfile = "EXCLUSIVE."
db_domain = «»
dispatchers = "(PROTOCOL=TCP) (SERVICE = OML5KXDB)" "
audit_file_dest = ' / u01/app/oracle/admin/OML5K/adump.
AUDIT_TRAIL = 'DB '.
db_name = "OML5K".
open_cursors = 300
pga_aggregate_target = 34558M
diagnostic_dest = ' / u01/app/oracle '.
Mon Aug 13 13:12:28 2012
PMON started with pid = 2, OS id = 21976
Mon Aug 13 13:12:28 2012
PSP0 started with pid = 3, OS id = 21978
Mon Aug 13 13:12:29 2012
VKTM started with pid = 4, OS id = 21980 high priority
VKTM clocked at (1) precision of milliseconds with DBRM quantum (100) ms
Mon Aug 13 13:12:29 2012
GEN0 started with pid = 5, OS id = 21984
Mon Aug 13 13:12:29 2012
DIAG started with pid = 6, OS id = 21986
Mon Aug 13 13:12:29 2012
DBRM started with pid = 7, OS id = 21988
Mon Aug 13 13:12:29 2012
DIA0 started with pid = 8, OS id = 21990
Mon Aug 13 13:12:29 2012
MA started with pid = 9, OS id = 21992
Mon Aug 13 13:12:29 2012
DBW0 started with pid = 10, OS id = 21994
Mon Aug 13 13:12:30 2012
DBW1 started with pid = 11, OS id = 21996
Mon Aug 13 13:12:30 2012
DBW2 started with pid = 12, OS id = 21998
Mon Aug 13 13:12:30 2012
DBW3 started with pid = 13, OS id = 22000
Mon Aug 13 13:12:30 2012
LGWR started with pid = 14, OS id = 22002
Mon Aug 13 13:12:30 2012
CKPT started with pid = 15, OS id = 22004
Mon Aug 13 13:12:30 2012
SMON started with pid = 16, 22006 = OS id
Mon Aug 13 13:12:30 2012
RECCE has started with pid = 17, OS id = 22008
Mon Aug 13 13:12:30 2012
MMON started with pid = 18, OS id = 22010
Mon Aug 13 13:12:30 2012
MMNL started with pid = 19, OS id = 22012
commissioning 1 dispatcher (s) for '(ADDRESS =(PARTIAL=YES) (PROTOCOL = TCP))' network address...
commissioning or shared server 1...
Environment ORACLE_BASE = / u01/app/oracle
Mon Aug 13 13:12:30 2012
kcbztek_populate_tbskey: key of db in controlfile and datafile 1 is incompatible...
Complete full restoration of datafile 4 to datafile copy u01/app/oracle/oradata/OML5K/users01.dbf. Elapsed time: 0:00:00
Checkpoint is 995547
last deallocation CPN is 3
Complete full restoration of datafile 3 to datafile copy u01/app/oracle/oradata/OML5K/undotbs01.dbf. Elapsed time: 0:00:00
Checkpoint is 995547
last deallocation CPN is 3
Mon Aug 13 13:13 2012
Complete full restoration of datafile 2 to datafile copy u01/app/oracle/oradata/OML5K/sysaux01.dbf. Elapsed time: 0:00:30
Checkpoint is 995547
last deallocation CPN is 995211
Complete full restoration of datafile 1 to datafile copy u01/app/oracle/oradata/OML5K/system01.dbf. Elapsed time: 0:00:38
Checkpoint is 995547
last deallocation CPN is 993074
Mon Aug 13 13:13:08 2012
Create database set controlfile reuse "OML5K."
MAXINSTANCES 8
MAXLOGHISTORY 1
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
Data file
' / u01/app/oracle/oradata/OML5K/system01.dbf',
' / u01/app/oracle/oradata/OML5K/sysaux01.dbf',
' / u01/app/oracle/oradata/OML5K/undotbs01.dbf',
' / u01/app/oracle/oradata/OML5K/users01.dbf'
LOGFILE GROUP 1 ('/ u01/app/oracle/oradata/OML5K/redo01.log') SIZE 51200 K,.
GROUP 2 ('/ u01/app/oracle/oradata/OML5K/redo02.log') SIZE 51200 K,.
GROUP 3 ('/ u01/app/oracle/oradata/OML5K/redo03.log') SIZE 51200 K RESETLOGS
WARNING: Temporary Tablespace default not specified in the CREATE DATABASE command
Default temporary tablespace will be necessary for a locally managed database in future release
Mon Aug 13 13:13:08 2012
Mount of redo thread 1, with mount id 3547719972
Completed: Create controlfile reuse set database 'OML5K '.
MAXINSTANCES 8
MAXLOGHISTORY 1
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
Data file
' / u01/app/oracle/oradata/OML5K/system01.dbf',
' / u01/app/oracle/oradata/OML5K/sysaux01.dbf',
' / u01/app/oracle/oradata/OML5K/undotbs01.dbf',
' / u01/app/oracle/oradata/OML5K/users01.dbf'
LOGFILE GROUP 1 ('/ u01/app/oracle/oradata/OML5K/redo01.log') SIZE 51200 K,.
GROUP 2 ('/ u01/app/oracle/oradata/OML5K/redo02.log') SIZE 51200 K,.
GROUP 3 ('/ u01/app/oracle/oradata/OML5K/redo03.log') SIZE 51200 K RESETLOGS
Closure of proceedings (immediate)
Closure of proceedings: in addition to logons disabled
Stop background MMNL process
MMON background process stop
The high waters = 1 license
All dispatchers/dispatchers and shared servers stop
ALTER DATABASE CLOSE NORMAL
ORA-1109 marked during: ALTER DATABASE CLOSE NORMAL...
ALTER DATABASE TO REMOVE
Stop process to archive
Archiving is disabled
Completed: ALTER DATABASE DISMOUNT
ARCH: Disabled archives due to the stop: 1089
Stop process to archive
Archiving is disabled
ARCH: Disabled archives due to the stop: 1089
Stop process to archive
Archiving is disabled
Mon Aug 13 13:13:11 2012
Stop background VKTM process
Mon Aug 13 13:13:13 2012
Instance shutdown complete
Mon Aug 13 13:13:13 2012
Starting ORACLE instance (normal)
Large information Pages *.
Total shared global area in large Pages = 0 KB (0%)
Large Pages used by this instance: 0 (0 KB)
Large wide Pages unused system = 0 (0 KB) (alloc incr 16 MB)
Large Pages configured wide system = 0 (0 KB)
The Page Size = 2048 KB
RECOMMENDATION:
Total size of Global region shared is 4098 MB. For optimal performance,
before next restart of the instance, to increase the number
unused wholesale Pages by 2049 2048 Pages atleast big Ko (4098 MB)
scale to get 100% of the Shared System
Global area allocated by using large pages
***********************************************************
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
SNA system picked latch-free 3
With the help of LOG_ARCHIVE_DEST_1 parameter value by default as USE_DB_RECOVERY_FILE_DEST
Autotune undo retention is enabled.
IMODE = BR
ILAT = 28
LICENSE_MAX_USERS = 0
SYS audit is disabled
Commissioning:
Oracle Database 11 g Release 11.2.0.3.0 - 64 bit Production.
ORACLE_HOME = /u01/app/oracle/product/11.2.0.3/db_1
Name of the system: Linux
Name of the node: OM5000
News Release: 2.6.18 - 308.el5
Version: #1 SMP kills Jan 27 17:17:51 EAST 2012
Machine: x86_64
Using the settings in client pfile /u01/app/oracle/cfgtoollogs/dbca/OML5K/initOML5KTemp.ora on machine OM5000
Parameters of the system with default values:
process = 150
nls_language = "ENGLISH."
nls_territory = 'AUSTRALIA '.
SGA_TARGET = 4G
control_files = "/ u01/app/oracle/oradata/OML5K/control01.ctl".
control_files = "/ u01/app/oracle/fast_recovery_area/OML5K/control02.ctl".
DB_BLOCK_SIZE = 8192
compatible = "11.2.0.0.0."
db_recovery_file_dest = ' / u01/app/oracle/fast_recovery_area.
db_recovery_file_dest_size = 50000M
nonerecovery_through_resetlogs = TRUE
undo_tablespace = 'UNDOTBS1.
Remote_login_passwordfile = "EXCLUSIVE."
db_domain = «»
dispatchers = "(PROTOCOL=TCP) (SERVICE = OML5KXDB)" "
audit_file_dest = ' / u01/app/oracle/admin/OML5K/adump.
AUDIT_TRAIL = 'DB '.
db_name = "OML5K".
open_cursors = 300
pga_aggregate_target = 34558M
diagnostic_dest = ' / u01/app/oracle '.
Mon Aug 13 13:13:14 2012
PMON started with pid = 2, OS id = 22030
Mon Aug 13 13:13:14 2012
PSP0 started with pid = 3, OS id = 22032
Mon Aug 13 13:13:15 2012
VKTM started with pid = 4, OS id = 22034 high priority
VKTM clocked at (1) precision of milliseconds with DBRM quantum (100) ms
Mon Aug 13 13:13:15 2012
GEN0 started with pid = 5, OS id = 22038
Mon Aug 13 13:13:15 2012
DIAG started with pid = 6, OS id = 22040
Mon Aug 13 13:13:15 2012
DBRM started with pid = 7, OS id = 22042
Mon Aug 13 13:13:15 2012
DIA0 started with pid = 8, OS id = 22044
Mon Aug 13 13:13:15 2012
MA started with pid = 9, OS id = 22046
Mon Aug 13 13:13:15 2012
DBW0 started with pid = 10, OS id = 22048
Mon Aug 13 13:13:15 2012
DBW1 started with pid = 11, OS id = 22050
Mon Aug 13 13:13:15 2012
DBW2 started with pid = 12, OS id = 22052
Mon Aug 13 13:13:15 2012
DBW3 started with pid = 13, OS id = 22054
Mon Aug 13 13:13:15 2012
LGWR started with pid = 14, OS id = 22056
Mon Aug 13 13:13:15 2012
CKPT started with pid = 15, OS id = 22058
Mon Aug 13 13:13:15 2012
SMON started with pid = 16, OS id = 22060
Mon Aug 13 13:13:15 2012
RECCE has started with pid = 17, OS id = 22062
Mon Aug 13 13:13:15 2012
MMON started with pid = 18, OS id = 22064
Mon Aug 13 13:13:15 2012
MMNL started with pid = 19, OS id = 22066
commissioning 1 dispatcher (s) for '(ADDRESS =(PARTIAL=YES) (PROTOCOL = TCP))' network address...
commissioning or shared server 1...
Environment ORACLE_BASE = / u01/app/oracle
Mon Aug 13 13:13:15 2012
Create database set controlfile reuse "OML5K."
MAXINSTANCES 8
MAXLOGHISTORY 1
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
Data file
' / u01/app/oracle/oradata/OML5K/system01.dbf',
' / u01/app/oracle/oradata/OML5K/sysaux01.dbf',
' / u01/app/oracle/oradata/OML5K/undotbs01.dbf',
' / u01/app/oracle/oradata/OML5K/users01.dbf'
LOGFILE GROUP 1 ('/ u01/app/oracle/oradata/OML5K/redo01.log') SIZE 51200 K,.
GROUP 2 ('/ u01/app/oracle/oradata/OML5K/redo02.log') SIZE 51200 K,.
GROUP 3 ('/ u01/app/oracle/oradata/OML5K/redo03.log') SIZE 51200 K RESETLOGS
WARNING: Temporary Tablespace default not specified in the CREATE DATABASE command
Default temporary tablespace will be necessary for a locally managed database in future release
Mount of redo thread 1, with mount id 3547724076
Completed: Create controlfile reuse set database 'OML5K '.
MAXINSTANCES 8
MAXLOGHISTORY 1
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
Data file
' / u01/app/oracle/oradata/OML5K/system01.dbf',
' / u01/app/oracle/oradata/OML5K/sysaux01.dbf',
' / u01/app/oracle/oradata/OML5K/undotbs01.dbf',
' / u01/app/oracle/oradata/OML5K/users01.dbf'
LOGFILE GROUP 1 ('/ u01/app/oracle/oradata/OML5K/redo01.log') SIZE 51200 K,.
GROUP 2 ('/ u01/app/oracle/oradata/OML5K/redo02.log') SIZE 51200 K,.
GROUP 3 ('/ u01/app/oracle/oradata/OML5K/redo03.log') SIZE 51200 K RESETLOGS
Stop background MMNL process
MMON background process stop
From MMON background process
From MMNL background process
Mon Aug 13 13:13:18 2012
MMON started with pid = 18, OS id = 22077
Mon Aug 13 13:13:18 2012
MMNL started with pid = 19, OS id = 22079
ALTER SYSTEM active session restricted;
ALTER database open resetlogs ' OML5K'
RESETLOGS after incomplete recovery until this THAT the CHANGE 995547
Errors in the /u01/app/oracle/diag/rdbms/oml5k/OML5K/trace/OML5K_ora_22071.trc file:
ORA-00313: open failed for the members of the group log 1 of thread 1
ORA-00312: thread 1 1 online journal: ' / u01/app/oracle/oradata/OML5K/redo01.log'
ORA-27037: unable to get file status
Linux-x86_64 error: 2: no such file or directory
Additional information: 3
Compensation online redo logfile 1 /u01/app/oracle/oradata/OML5K/redo01.log
Deletion log 1 of thread 1 sequence number 0 online
Errors in the /u01/app/oracle/diag/rdbms/oml5k/OML5K/trace/OML5K_ora_22071.trc file:
ORA-00313: open failed for the members of the group log 1 of thread 1
ORA-00312: thread 1 1 online journal: ' / u01/app/oracle/oradata/OML5K/redo01.log'
ORA-27037: unable to get file status
Linux-x86_64 error: 2: no such file or directory
Additional information: 3
Errors in the /u01/app/oracle/diag/rdbms/oml5k/OML5K/trace/OML5K_ora_22071.trc file:
ORA-00313: open failed for the members of the group log 1 of thread 1
ORA-00312: thread 1 1 online journal: ' / u01/app/oracle/oradata/OML5K/redo01.log'
ORA-27037: unable to get file status
Linux-x86_64 error: 2: no such file or directory
Additional information: 3
Mon Aug 13 13:13:18 2012
Running the Checker found 1 new failures of persistent data
Online redo logfile 1 full compensation
Errors in the /u01/app/oracle/diag/rdbms/oml5k/OML5K/trace/OML5K_ora_22071.trc file:
ORA-00313: open failed for the members of the Group of newspapers wire 2 1
ORA-00312: wire 2 1 online journal: ' / u01/app/oracle/oradata/OML5K/redo02.log'
ORA-27037: unable to get file status
Linux-x86_64 error: 2: no such file or directory
Additional information: 3
Compensation online redo logfile 2 /u01/app/oracle/oradata/OML5K/redo02.log
Erasing online newspaper wire 2 1 sequence number 0
Errors in the /u01/app/oracle/diag/rdbms/oml5k/OML5K/trace/OML5K_ora_22071.trc file:
ORA-00313: open failed for the members of the Group of newspapers wire 2 1
ORA-00312: wire 2 1 online journal: ' / u01/app/oracle/oradata/OML5K/redo02.log'
ORA-27037: unable to get file status
Linux-x86_64 error: 2: no such file or directory
Additional information: 3
Errors in the /u01/app/oracle/diag/rdbms/oml5k/OML5K/trace/OML5K_ora_22071.trc file:
ORA-00313: open failed for the members of the Group of newspapers wire 2 1
ORA-00312: wire 2 1 online journal: ' / u01/app/oracle/oradata/OML5K/redo02.log'
ORA-27037: unable to get file status
Linux-x86_64 error: 2: no such file or directory
Additional information: 3
Compensation online redo logfile 2 complete
Errors in the /u01/app/oracle/diag/rdbms/oml5k/OML5K/trace/OML5K_ora_22071.trc file:
ORA-00313: open failed for the members of Group 3, Journal of thread 1
ORA-00312: wire 3 1 online journal: ' / u01/app/oracle/oradata/OML5K/redo03.log'
ORA-27037: unable to get file status
Linux-x86_64 error: 2: no such file or directory
Additional information: 3
Compensation online redo logfile 3 /u01/app/oracle/oradata/OML5K/redo03.log
Erasing online Journal 3 of thread 1 sequence number 0
Errors in the /u01/app/oracle/diag/rdbms/oml5k/OML5K/trace/OML5K_ora_22071.trc file:
ORA-00313: open failed for the members of Group 3, Journal of thread 1
ORA-00312: wire 3 1 online journal: ' / u01/app/oracle/oradata/OML5K/redo03.log'
ORA-27037: unable to get file status
Linux-x86_64 error: 2: no such file or directory
Additional information: 3
Errors in the /u01/app/oracle/diag/rdbms/oml5k/OML5K/trace/OML5K_ora_22071.trc file:
ORA-00313: open failed for the members of Group 3, Journal of thread 1
ORA-00312: wire 3 1 online journal: ' / u01/app/oracle/oradata/OML5K/redo03.log'
ORA-27037: unable to get file status
Linux-x86_64 error: 2: no such file or directory
Additional information: 3
Compensation online redo logfile 3 complete
Log in online /u01/app/oracle/oradata/OML5K/redo01.log: thread 1 Group 1 had been previously authorized
Log in online /u01/app/oracle/oradata/OML5K/redo02.log: thread 1 group 2 was previously disabled
Log in online /u01/app/oracle/oradata/OML5K/redo03.log: thread 1 Group 3 has been previously authorized
Definition of embodiment of recovery target 2
Assigning activation ID 3547724076 (0xd375f92c)
Thread 1 is open to the log sequence 1
Currently journal # 1, seq # 1 mem # 0: /u01/app/oracle/oradata/OML5K/redo01.log
Opening of redo thread 1
SMON: enabling cache recovery
[22071] successfully put 2 undo Tablespace online.
Cancel initialization is complete series: 0 start: 256557774 end: 256557834 diff:60 (0 seconds)
Dictionary check start
Tablespace 'TEMP' #3 found in the data dictionary,
but not in the controlfile. Adding to controlfile.
Verification of the complete dictionary
Check the compatibility of the header files for tablespace 11g encryption...
Compatibility check header files 11g for tablespace encryption completed
SMON: enabling the recovery of tx
*********************************************************************
ATTENTION: The following temporary tablespaces do not contain any file.
This condition can occur when a backup controlfile
been restored. It may be necessary to add files to these
storage spaces. This can be done using the SQL statement:
ALTER TABLESPACE < nom_tablespace > ADD TEMPFILE
Furthermore, if these temporary tablespaces are no longer
necessary, then they can be recessed.
Temporary tablespace is empty: TEMP
*********************************************************************
Database character set is US7ASCII
Create the relationship IPS_PACKAGE_UNPACK_HISTORY
No Resource Manager plan active
**********************************************************
WARNING: Files may exist in db_recovery_file_dest
that are not known to the database. Use the RMAN command
RECOVERY of CATALOG AREA again all these files from the catalog.
If the files cannot be catalogued, then remove them manually
using the OS command.
Cause one of the following events:
1. a backup controlfile was restored.
2. a standby controlfile was restored.
3. the controlfile was recreated.
4 db_recovery_file_dest had previously been activated and
then disabled.
**********************************************************
off replication_dependency_tracking (no replication multimaster async found)
From QMNC background process
Mon Aug 13 13:13:20 2012
QMNC started with pid = 24, OS id = 22087
LOGSTDBY: Validation controlfile with logical metadata
LOGSTDBY: Validation complete
World famous OML5K
Completed: alter resetlogs open database 'OML5K '.
ALTER database rename global_name to 'OML5K '.
Completed: alter database rename global_name to 'OML5K '.
ALTER TABLESPACE TEMP add TEMPFILE ' / u01/app/oracle/oradata/OML5K/temp01.dbf' SIZE 20480 K REUSE AUTOEXTEND ON NEXT 640 K MAXSIZE UNLIMITED
Completed: ALTER TABLESPACE TEMP add TEMPFILE ' / u01/app/oracle/oradata/OML5K/temp01.dbf' SIZE 20480 K REUSE AUTOEXTEND ON NEXT 640 K MAXSIZE UNLIMITED
ALTER DEFAULT DATABASE TABLESPACE 'USERS '.
Completed: ALTER DATABASE default TABLESPACE 'USERS '.
change the character set of database INTERNAL_CONVERT ZHS16GBK
From CJQ0 background process
Mon Aug 13 13:13:22 2012
CJQ0 started with pid = 23, OS id = 22089
Mon Aug 13 13:13:23 2012
50000 MB db_recovery_file_dest_size is 0.00% used. It is a
user-specified limit on the amount of space that will be used by the present
for the files related to the recovery of databases and does not reflect the amount of
space available in the underlying file system or ASM diskgroup.
Mon Aug 13 13:13:27 2012
Thread 1 Advanced to save sequence 2 (LGWR switch)
Currently Journal # 2 seq # 2 mem # 0: /u01/app/oracle/oradata/OML5K/redo02.log
Mon Aug 13 13:13:30 2012
Character in controlfile to ZHS16GBK update
Set the synchronization information in connection with the base characters
SYS. RULE$ (CONDITION) - modified CLOB representation
SYS. PLANNER$ _EVENT_LOG (ADDITIONAL_INFO) - modified CLOB representation
SYS. SNAP$ (REL_QUERY) - modified CLOB representation
SYS. SNAP$ (ALIAS_TXT) - modified CLOB representation
SYS. WRI$ _ADV_OBJECTS (ATTR4) - modified CLOB representation
SYS. WRI$ _ADV_OBJECTS (OTHER) - modified CLOB representation
SYS. WRI$ _ADV_DIRECTIVE_META (DATA) - modified CLOB representation
SYS. WRI$ _DBU_FEATURE_METADATA (INST_CHK_LOGIC) - modified CLOB representation
SYS. WRI$ _DBU_FEATURE_METADATA (USG_DET_LOGIC) - modified CLOB representation
SYS. WRI$ _DBU_HWM_METADATA (LOGIC) - modified CLOB representation
SYS. WRI$ _OPTSTAT_HISTHEAD_HISTORY (EXPRESSION) - modified CLOB representation
Mon Aug 13 13:13:30 2012
From OCMS background process
Mon Aug 13 13:13:30 2012
OCMS started with pid = 27, OS id = 22098
SYS. WRI$ _REPT_FILES ($SYS_NC00005) - modified CLOB representation
SYS. AMOUNT $ (SRC_STMT) - modified CLOB representation
SYS. AMOUNT $ (DEST_STMT) - modified CLOB representation
SYS. ATTRIBUTE_TRANSFORMATIONS$ (XSL_TRANSFORMATION) - modified CLOB representation
SYS. METASTYLESHEET (STYLE sheet) - modified CLOB representation
XDB. XDB RESOURCE $ (SYS_NC00027$)-modified CLOB representation
XDB. XDB$ XDB_READY (DATA) - modified CLOB representation
XDB. XDB$ DXPTAB ($SYS_NC00006) - modified CLOB representation
MDSYS. SDO_XML_SCHEMAS (XMLSCHEMA) - modified CLOB representation
Thread 1 Advanced to save sequence 3 (switch LGWR)
Currently Journal # 3 seq # 3 mem # 0: /u01/app/oracle/oradata/OML5K/redo03.log
Mon Aug 13 13:13:43 2012
MDSYS. SDO_COORD_OP_PARAM_VALS (PARAM_VALUE_FILE) - modified CLOB representation
MDSYS. SDO_GEOR_XMLSCHEMA_TABLE (XMLSCHEMA) - modified CLOB representation
MDSYS. SDO_STYLES_TABLE (DEFINITION) - modified CLOB representation
SYSMAN. MGMT_IP_ELEM_DEFAULT_PARAMS (VALUE) - modified CLOB representation
SYSMAN. MGMT_IP_REPORT_ELEM_PARAMS (VALUE) - modified CLOB representation
SYSMAN. MGMT_IP_SQL_STATEMENTS (SQL_STATEMENT) - modified CLOB representation
SYSMAN. MGMT_JOB_LARGE_PARAMS (PARAM_VALUE) - modified CLOB representation
SYSMAN. MGMT_SEC_INFO (B64_LOCAL_CA) - modified CLOB representation
SYSMAN. MGMT_SEC_INFO (B64_INTERNET_CA) - modified CLOB representation
APEX_030200.WWV_FLOW_FLASH_CHARTS (CHART_XML) - modified CLOB representation
APEX_030200.WWV_FLOW_FLASH_CHART_SERIES (SERIES_QUERY) - modified CLOB representation
APEX_030200.WWV_FLOW_SHORTCUTS (SHORTENED) - modified CLOB representation
APEX_030200.WWV_FLOW_STEPS (HELP_TEXT) - modified CLOB representation
APEX_030200.WWV_FLOW_STEPS (HTML_PAGE_HEADER) - modified CLOB representation
APEX_030200.WWV_FLOW_STEP_PROCESSING (PROCESS_SQL_CLOB) - modified CLOB representation
APEX_030200.WWV_FLOW_PAGE_GENERIC_ATTR (ATTRIBUTE_VALUE) - modified CLOB representation
APEX_030200.WWV_FLOW_TEMPLATES (HEADER_TEMPLATE) - modified CLOB representation
APEX_030200.WWV_FLOW_TEMPLATES (FOOTER_TEMPLATE) - modified CLOB representation
APEX_030200.WWV_FLOW_TEMPLATES (BOX) - modified CLOB representation
Mon Aug 13 13:13:54 2012
Thread 1 cannot allot of new newspapers, sequence 4
Checkpoint is not complete
Currently Journal # 3 seq # 3 mem # 0: /u01/app/oracle/oradata/OML5K/redo03.log
Mon Aug 13 13:13:57 2012
APEX_030200.WWV_FLOW_PAGE_PLUGS (PLUG_SOURCE) - modified CLOB representation
Thread 1 Advanced to record the sequence 4 (switch LGWR)
Currently journal # 1, seq # 4 mem # 0: /u01/app/oracle/oradata/OML5K/redo01.log
APEX_030200.WWV_FLOW_PAGE_PLUGS (CUSTOM_ITEM_LAYOUT) - modified CLOB representation
APEX_030200.WWV_FLOW_PAGE_PLUG_TEMPLATES (MODEL) - modified CLOB representation
APEX_030200.WWV_FLOW_PAGE_PLUG_TEMPLATES (TEMPLATE2) - modified CLOB representation
APEX_030200.WWV_FLOW_PAGE_PLUG_TEMPLATES (TEMPLATE3) - modified CLOB representation
APEX_030200.WWV_FLOW_PROCESSING (PROCESS_SQL_CLOB) - modified CLOB representation
APEX_030200.WWV_FLOW_REGION_REPORT_COLUMN (PK_COL_SOURCE) - modified CLOB representation
APEX_030200.WWV_FLOW_ROW_TEMPLATES (ROW_TEMPLATE1) - modified CLOB representation
APEX_030200.WWV_FLOW_ROW_TEMPLATES (ROW_TEMPLATE2) - modified CLOB representation
APEX_030200.WWV_FLOW_ROW_TEMPLATES (ROW_TEMPLATE3) - modified CLOB representation
APEX_030200.WWV_FLOW_ROW_TEMPLATES (ROW_TEMPLATE4) - modified CLOB representation
APEX_030200.WWV_FLOW_BANNER (BANNER) - modified CLOB representation
APEX_030200.WWV_FLOW_BUTTON_TEMPLATES (MODEL) - modified CLOB representation
APEX_030200.WWV_FLOW_INSTALL (DEINSTALL_SCRIPT) - modified CLOB representation
APEX_030200.WWV_FLOW_LIST_TEMPLATES (LIST_TEMPLATE_CURRENT) - modified CLOB representation
APEX_030200.WWV_FLOW_LIST_TEMPLATES (LIST_TEMPLATE_NONCURRENT) - modified CLOB representation
APEX_030200.WWV_FLOW_LIST_TEMPLATES (SUB_LIST_ITEM_CURRENT) - modified CLOB representation
APEX_030200.WWV_FLOW_LIST_TEMPLATES (SUB_LIST_ITEM_NONCURRENT) - modified CLOB representation
APEX_030200.WWV_FLOW_LIST_TEMPLATES (ITEM_TEMPLATE_CURR_W_CHILD) - modified CLOB representation
APEX_030200.WWV_FLOW_LIST_TEMPLATES (ITEM_TEMPLATE_NONCURR_W_CHILD) - modified CLOB representation
APEX_030200.WWV_FLOW_LIST_TEMPLATES (SUB_TEMPLATE_CURR_W_CHILD) - modified CLOB representation
APEX_030200.WWV_FLOW_LIST_TEMPLATES (SUB_TEMPLATE_NONCURR_W_CHILD) - modified CLOB representation
APEX_030200.WWV_FLOW_WORKSHEETS (SQL_QUERY) - modified CLOB representation
Mon Aug 13 13:14:08 2012
APEX_030200.WWV_FLOW_CUSTOM_AUTH_SETUPS (PAGE_SENTRY_FUNCTION) - modified CLOB representation
APEX_030200.WWV_FLOW_CUSTOM_AUTH_SETUPS (SESS_VERIFY_FUNCTION) - modified CLOB representation
APEX_030200.WWV_FLOW_CUSTOM_AUTH_SETUPS (PRE_AUTH_PROCESS) - modified CLOB representation
APEX_030200.WWV_FLOW_CUSTOM_AUTH_SETUPS (AUTH_FUNCTION) - modified CLOB representation
APEX_030200.WWV_FLOW_CUSTOM_AUTH_SETUPS (POST_AUTH_PROCESS) - modified CLOB representation
Information about the game refreshing attributes of type new character
Completed: alter database INTERNAL_CONVERT ZHS16GBK character set
Mon Aug 13 13:14:11 2012
ALTER SYSTEM disable session restricted;
Mon Aug 13 13:14:12 2012
Thread 1 Advanced to record the sequence 5 (switch LGWR)
Currently Journal # 2 seq # 5 mem # 0: /u01/app/oracle/oradata/OML5K/redo02.log
Mon Aug 13 13:14:28 2012
Closure of proceedings (immediate)
OCMS background process stop
Closure of proceedings: in addition to logons disabled
Stop background QMNC process
Mon Aug 13 13:14:29 2012
Stop background CJQ0 process
Stop background MMNL process
MMON background process stop
License of the high waters = 14
Stop slave queue treatments, flags = 7
Treatment of slave leader arrested projects
All dispatchers/dispatchers and shared servers stop
ALTER DATABASE CLOSE NORMAL
Mon Aug 13 13:14:33 2012
SMON: disabling recovery tx
SMON: disabling of cache recovery
Mon Aug 13 13:14:33 2012
Stop process to archive
Archiving is disabled
Stopping the process Archive avoided: active 0
Thread 1 is thrown to the sequence of journal 5
Closing of redo thread 1
Completed: ALTER DATABASE CLOSE NORMAL
ALTER DATABASE TO REMOVE
Stop process to archive
Archiving is disabled
Completed: ALTER DATABASE DISMOUNT
ARCH: Disabled archives due to the stop: 1089
Stop process to archive
Archiving is disabled
ARCH: Disabled archives due to the stop: 1089
Stop process to archive
Archiving is disabled
Mon Aug 13 13:14:34 2012
Stop background VKTM process
State of the system dumped to trace file /u01/app/oracle/diag/rdbms/oml5k/OML5K/trace/OML5K_ora_22163.trc
Mon Aug 13 13:14:36 2012
Instance shutdown complete
Mon Aug 13 13:14:37 2012
Starting ORACLE instance (normal)We are in 2013, all the logs of your alerts indicate former far
-
ghettoVCB extract missing after restart
Hello
can someone help me with this problem, I used and followed this document ghettoVCB.sh - free alternative for the backup of the virtual ESX (i) 3.5 and 4.x + machines - last updated 14/03/2011 to set up n schedulling for my VM Server backup. After completing the configuration, I tried to backup using the list and it is successful. Then I try to program using crontab, everything is ok until I have restart the server after restarting, I noticed that all the files and folders that I had created and configure disappeared... I hope there is someone out there can help my problem here...
Hello
Changes or the location of the files in ESXi are not preserved through reboots that ESXi is loaded into memory. Only some configuration files are saved via cron, to changes to preserve as cron, you will need to run the script to auto - backup.sh which is documented in the documentation of ghettoVCB. It is also recommended to place scripts ghettoVCB and the configuration files, the local or shared data store, where they will be persit by restarts.
Maybe you are looking for
-
X23O Finger Print Reader LED lights up when the unit is off NORMAL function?
Hey guys, is it normal that the fingerprint reader to Flash green when the X 230 is off? Win8 running Thank you!!
-
Pavilion Slimline s3400f: HP slimline s3400f desktop bluetooth
HP Pavilion Slimline s3400f desktop PC - this computer has Bluetooth devices listed on the control panel. I have a set of 2 wireless speakers UEBoom I want to use with the computer. I lit one of the speakers and proceeded to Bluetooth devices on th
-
How can I check the spelling of apply to wordpad?
OR can I?
-
XPS 8900 internal power connectors
Looking inside my 8900 XPS desktop computer I find that I have 2 female molex connectors type 6-pin black on the end of the cables coming from the power supply. Anyone know what these are for, please? Thank you
-
Cannot install Windows 8.1
I have an Alienware Area 51 triad I bought last July. It came with a 8.1 Windows restore disk that I used to install Windows on the machine 8.1 the first day. Basically, I wanted to use my PCIE SSD. OK, so all is well since then and I've upgraded to