Unable to connect to the console of the virtual computer after dns change

Similar Questions

• Unable to connect to the virtual machine after adding new eSATA drive

  Hello.

  I'm trying to connect my new 2 TB drive in VMWare Workstation. It is connected via eSATA to the host computer, and it works. I added the drive to the desktop as a new "physical disk." But now I can not power the workstation the most.

  (1) when I start the VMWare Workstation it right ask admin (it didn't need before).

  (2) when I turn on the prompt does not charge even the bios. It shows a rear screen with the logo of VMWare for a while and then stop saying: "VMware Workstation cannot connect to the virtual machine. Make sure that you have the rights to run the program and access all directories that it uses and access rights to all directories for temporary files. »

  The host is running Windows 7 x 64. The workstation runs under the standard user account.

  Thank you.

  Hmmm - it's unexpected - works for me here - only difference: I tried with only 1 TB disks.

  You start Workstatiion as an administrator?

  _________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• Unable to connect to the virtual machine after they are created

  I installed VMware view and connected to my server Vcenter. Composer, I installed the server vcenter and View manager recognizes it.

  I created a virtual Windows Vista machine, is joined to the domain and instant, it.

  I then created a persistent office pool and allowed users to access.  I can see the virtual machine created the VCenter

  However, the view Client cannot access the virtual machine (he can see the office pool) bit tells me that the customer is not available.

  Any ideas on what I missed?

  Go to the desktop the pool in view Administrator resources and check the status, it should say "Ready".  If this is not the one usually means that there is something blocking the port 4001 of the agent on the view connection server.  I got this when deploying a pool on a different subnet and there is a network between the areas of the network firewall.  The Vista firewall can sometimes be reset on the deployed virtual check computer so who has not been reactivated and adjust the GPO if necessary.

• No network connection to the virtual computer after migration manually to the new host

  We have added six new hosts to our environment, and I was tasked to test connections of VIRTUAL LAN on each of them before we move VM production of their.  This is probably a simple problem, but I am new to VMWare and need help.  I already talked to our network guys, and he assures me that the physical switches are setup and working properly.  We work a vDS.

  I'm testing 14 VLANs on six new hosts.  All but one are constantly working.  (They all work on the hosts of origin which were in force before.)  I have a static IP configuration on my test VM and MAC is set to automatic.  I checked the MAC does not change when you migrate to other hosts and the VLAN correct is listed in the settings the VM network (it is not empty).  Him VLAN will work on three of the six hosts, but not all at the same time.  The strange thing is that guests at work are constantly changing.  For example, this morning hosts11, 12 and 14 may work, but this afternoon, that could change at hosts12, 14 and 16.  I don't understand why they would change on their own.

  My test consists of VM testing, migration manually, powering back, then he ping from my computer off.  Of course everything works when I get ping responses.  When I get no answers, the test of the virtual machine has a yellow exclamation mark on the network icon in the system tray.

  What should I do to fix this?

  How is the network configured?  You have a different NIC port/cable for each VLAN or Trunking used on the side of the switch?

  If you use circuits on the side of the switch, then your GRPE ports virtual switch a VLAN ID needs to match the vlan is underway to shared resources.  No matter if it's a standard switch or switch distributed... you still need this ID of vlan.

  I've seen the random question that you encounter if missing one or more of of the uplinks on the side of the switch the VLAN.

• Unable to connect to the virtual disk Service, Virtual Disk Manager Interface not registered

  I installed Windows 7 Ultimate on this laptop as a new installation about six months ago.  Since then, I don't think I ever ran diskmgmt.  Today, I joined a new external hard drive usb, it reported the drivers installed fine, but then the installation bombed at the beginning.  I went to verity, what had happened and has run diskmgmt.msc (as an administrator), but she came back with the message "Unable to connect to the virtual disk Service" and also a small OK msgbox appeared with the title "Virtual Disk Manager" and the "Interface not registered" message

  I disconnected the USB hard drive and tried again diskmgmt, but no change.

  I restarted in safe mode, tried diskmgmt, but no change.

  I ran sfc/scannow, but it has reported that it found no errors.

  I checked that the virtual disk service has been configured as a textbook in services.msc, and event viewer showed that when I ran diskmgmt he started VDS and then stopped VDS.

  I tried again, but still not like before.

  Is there some dll I can't regsrv32?

  Thank you

  Marc

  Hello

  I suggest you to return the items for the following responses from Microsoft, he says same issues with trying the troubleshooting steps and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/cant-start-disk-management-unable-to-connect-to/31898500-9d84-4CB5-9ba3-c1f42e3b1ace

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/problems-with-Vista-after-unplugging-by-external/093f1660-160F-478f-b81a-493e963ffd9a

  http://TechNet.Microsoft.com/en-us/library/cc771775.aspx

  Note: it also applies to Windows 7.

  Hope the information is useful.

• I am unable to connect to the virtual pc Xp mode when I try to open a session given an error unable to connect to the domain that a domain controller is down or unavailable,

  I am unable to connect to the virtual pc Xp mode when I try to open a session given an error unable to connect to the domain that a domain controller is down or unavailable,

  Hi Rajendra Patil,

  I suggest you to ask your question on the TechNet Forums.

  Windows Virtual PC and XP Mode.

  http://social.technet.Microsoft.com/forums/en/w7itprovirt/threads

  I hope this helps!

• Unable to connect with the Mac computer?

  Unable to connect with the Mac computer?

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  -Run "Difficulty Host File" option https://helpx.adobe.com/creative-cloud/kb/cc-cleaner-tool-installation-problems.html

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-desktop-application-failed.html

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

• Try to connect to the wireless computer after freshly installed Windows says I am connected to the router, but I have no internet access

  Original title: connection problem

  Hello! I recently did a clean installation of Windows 7 Professional 64 bit and I use a wireless USB adapter. Windows says I am connected to the router, but I have no internet access, and I have this yellow on trinagle. Work of all my other Windows 7 PCs, but this one. Could someone help me? Thank you!

  Hello

  Welcome to the community forums of Microsoft and thanks for posting the question. I've surely you will help find a solution on the issue. I see that you are unable to connect to the wireless network after you perform a new installation.

  I suggest you to consult the steps described in the article:

  Method 1:

  You can try the steps in the link and check.

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  You can update the driver of windows 7 on the manufacturer's Web site.

  Method 2:

  
  You can remove and re-create the wireless network connection, follow these steps:

  a. Click Start, type ncpa.cpl , and then press on Enter.
  b. right click on your wireless network connection and then click Properties.
  c. click the wireless networks tab.
  d. under preferred networks, click your Wireless
  network and then click on remove. e. click on view Wireless networks.
  f. under management of the network, click refresh the network list.
  g. under Choose a wireless network, click the wireless network to which you want to connect, and then click Connect.
  
  Method 3:
   
  
  If the steps above don't you can uninstall and reinstall the NIC drivers and check with the question.

  a. click on Start menu, in the Search tab type devmgmt.msc and press ENTER.

  b. right click on network adapters and click Uninstall and restart the computer.

  c. after rebooting, install network cards and check with the question.

  
  Method 4:
  
  You can temporarily disable the antivirus and firewall on the computer and see if it helps:
  Enable or disable Windows Firewall
  
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
  NOTE: Turn off Windows Firewall might make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.
  You can see the following link to disable the Antivirus installed on your computer software.
   
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks

  Please follow these recommended steps and post if you still experience the problem. I'd be happy to help you further.

• Remote assistance - unable to connect to the desktop computer using the remote connection

  Hello

  I'm currently running vista Professional 64 bits for portable and desktop computers.

  Problem:
  -I am not able to connect to the desktop computer by using the remote connection.

  Tried:
  -Setup the remote asstance for the Username (account login) designated
  -looked up the IP address
  -entering the IP then username and password
  Failed connection *.

  Little Question, too:
  -I run behind a router with 3 machines connected to the router, it would change my location from IP address? I think that's where I'm stuck at.

  The following article should you guide through the process and solve your problems:http://www.vistax64.com/tutorials/116361-remote-assistance.html.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Unable to connect to the remote computer

  Hello

  I work in an organization. I set up VPN in my computer and when I try to access a remote server, it comes with the following error:

  Remote Desktop cannot connect to the remote computer to one of the following reasons:

  1. remote access to the server is not enabled

  2. the remote computer is disabled

  3. the remote computer is not available on the network

  Make sure that the remote computer is on and connected to the network, and remote access is enabled.

  I connected several times using my computer. I had no problem. But suddenly am facing it.

  I also tried another computer and I was able to connect without any problems.

  When connected to the VPN, am able to ping the server name and IP. Am also able to connect to shared folders (\\COMPUTERNAME). But I am not able to connect to the desktop remotely using DRC (mstsc).

  Help, please!

  Thank you.

  Vignesh.

  Hello

  Thanks for posting your query in Microsoft Community.

  The Microsoft Answers community focuses on the context of use. Please reach out to the business community of COMPUTING in the TechNet forum below:

  http://social.technet.Microsoft.com/forums/en/category/w7itpro

• Unable to connect to the desktop computer running Windows 7 laptop running Windows 7, both in my home network, using remote desktop

  My desktop (host) is running Win7 Pro and my (client) laptop is running Win 7 Home Premium. For the office, I went to the control panel and allows remote connections. When I try to connect with the laptop in my same home network, I get an error message: Remote Desktop cannot connect to the remote computer you for one of the following reasons:

  (1) remote access to the server is not enabled

  (2) the remote computer is disabled

  (3) the remote computer is not available on the network

  Now, the computer is on and I can see what he listed as one of my computers on network. In fact, I accessed the command of remote desktop by right-clicking on the desktop in the list of networks and by selecting Remote Desktop in the menu dropdown.

  Obviously, I am missing something or something wrong. Please help me to understand.

  What do you call the remote [DRC] host desktop desktop machine, IE. local LAN IP static, the laptop?

  See this help as possible...

  http://theillustratednetwork.MVPs.org/RemoteDesktopTroubleshootingChecklist.html

• Unable to connect to the virtual wifi

  Hello

  I can not connect to the virtual wifi via android. on my old laptop with windows 7, it works the same way.
  I created it with commands cmd:
  command netsh wlan set hostednetwork mode = allow ssid = "MySSID" key = "Mykey" keyUsage = persistent
  netsh wlan start hostednetwork
  in the connected connections sound also displayed with internet, but when I try to connect with my GNex, his only tries to connect, but cannot...
  I have the Qualcomm Atheros AR8161 PCI - E Gigabit Ethernet Controller (NDIS 6.30) for Ethernet and wifi: Broadcom 802.11n
  OS: Windows 8 Pro
  You need more info?
  Thank you

  Hi Mike,.

  Try the following steps:

  a. click on properties of your data card (if you use it) connection.

  b. click the 5th tab "sharing".

  c. check box on all the options there.

  d. and reactivate your virtual network via the following command: -.
  
  netsh wlan hostednetwork stop
  netsh wlan start hostednetwork

• Connection to the virtual computer

  I disabled the connection to the local network through RDP.

  But I am able to connect through console of the vsphere client.

  How does this work?

  If you disable Network Interface at the level of the comments on a virtual machine or remove completely the vNIC to the VM, it would not affect vSphere Client to allow you to open the Console of the virtual machine.

  examine the console of the virtual machine as if the standard output device connected to your virtual machine. ESXi host running MKS (mouse, keyboard and screen) process for each powered on VM, so opening the virtual machine console is managed by the OS ESXi itself. It has nothing to do with the connection of the virtual machine.

• VDI connect to the virtual computer with multiple NICs, use wrong address

  Strange question, we are the double of a VM to autoguiding.  Each NIC is on a different network, and it works very well.  Except when you sign out of the VM with a zero client.  If both network adapters is enabled through the vsphere, zero client the client tries to connect to the virtual machine using a wrong address.  He will try to use the address 172.16.x.x, but the life of the virtual machine and is stored on 192.168.x.x network.  Is there a way to make the NETWORK on 192.168.x.x address network card that zero the client tries to connect?

  Using the network-> Advanced-> advanced-> tab connections maps and links, move the 192.168.x.x network adapter to the top of the list of connections.

  Linjo

• Not allowed to connect to the virtual machine after archive / installation of the Tiger

  I made an installation of archive / install OS 10.4 as part of the maintenance of the system. Today, VMware does not connect to the virtual machine and wants me to check my right to use the program and its directories.

  I recently bought VM Fusion and bought the license / registered. Something to do with installing the OS, maybe, but everything else works well.

  I don't have reinstall Fusion as part of the installation of archive / install.

  I would say that (this will not affect your VMS) because it is an easy thing to do and should decide on problems of permissions on the application itself.