After restarting the Services, service of the Foundation does not start

Similar Questions

• ICS error - "the service of the redundancy or the grope does not start.

  These days I was facing this problem on ICS. Whenever I try to share my internet connection with wifi, it gives an error saying: "the service of the redundancy or the grope does not start" I have reset the connection, disable on surroundings & & restart the system as well, but not the changes even error every time. Is there someone can help on this desire to please much appreciated.

  Hi kaliszewski,.

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, it looks that you are facing with Internet connection sharing problems.

  Please follow the steps mentioned below that can help us to solve the cause of the problem.

  Method 1:

  Maybe not all services that run the Internet (ICS) ICS are enabled. I suggest to start over and make sure that the underside of addiction services are activated.

  1. click on Start, run, type services.msc and click OK.

  2. to activate a service, find in the right pane and double click on its entry.

  3. make sure that the Startup Type is set to Automatic , and then click OK.

   

  All the following services must be so configured to use ICS:

  Application Layer Gateway Service
  Network connections
  Knowledge of the network (NLA) locations
  Plug-And-Play
  Remote Access Auto Connection Manager
  Remote Access Connection Manager
  Remote procedure call (RPC)
  Telephony

  After checking and automatic startup for each of these services configuration, close the Services window and restart the computer before trying again to enable ICS.

  Method 2:

  To disable and then re-enable the Internet connection sharing on the Internet connection of the Windows 7 computer. If it asks you to select a private network connection, select the one that connects to the hub. Check the connections to the LAN on each computer:

  1. Press Windows Key + R.
  2. Type ncpa.cpl in the box and press enter.
  3. Right click on the connection to the local network, and then click status.
  4. Click on Details. It should show these values:
  • IPv4 address: 192.168. *. *
  • IPv4 subnet mask: 255.255. *. *

  If the values are not good, Internet connection sharing is not configured correctly.

  You can also consult the following link for troubleshooting Internet connection sharing problems:

  http://Windows.Microsoft.com/en-us/Windows7/using-ICS-Internet-connection-sharing

  Hope the above caliper problems

  If you need further clarification or additional assistance, please let us know, we will contact you as soon as possible.

  Thank you.

• When the Admin sign on the office comes to the top, but after that the computer does not respond when the user tries to do anything. There are actually turns off the computer with the power button.

  Original title: user profile

  My administrator user profile does not work properly, but I have a user profile that has activated the parental control that worked well for about a year and yesterday when this user logs on the desktop comes up, but after that the computer does not respond when that user tries to do anything. There are actually turns off the computer with the power button.  I ran a virus scan and spyware scan in my user admin profile and he has not found anything.  I don't know what to check.

  Hello rhunter15,

  There may be a program to interfere with Parental controls so that we can try a few things to see if we can determine the application or program that is causing problems.

  First of all, we run System File Checker to see if you have a corrupt file system.

  • Click Start
  • Click on all programs
  • Click Accessories, and then right-click on the command prompt.
  • Select the Security tab and choose "Run as Administrator"
  • Click on command prompt
  • Type SFC/scannow.

  It will scan and repair any damaged operating system files.

  To determine if there is a program because of a conflict, we recommend that you perform a "clean boot" of the computer. A clean boot is designed to disable programs and services in the background as much as possible. This helps determine which service or program can be the cause of the problem.  For more information about how to perform a clean boot for troubleshooting, click the number below to view the article in the Microsoft Knowledge Base.

  KB 929135 - how to solve a problem of performaing a clean boot in Windows Vista.
  http://support.Microsoft.com/kb/929135

  Once you have finished the clean boot, check again and see if you get the error of parental control.

  If please post again and let us know if that helped pinpoint the problem or if you still need help.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The browser does not start after you have turned off and turned on the computer

  The browser does not start after you have turned off and turned on the computer. I tried to remove the program entirely (as well as personal preferences), to create a new account, install a different browser versions. All this has not helped. (I have Windows 7). Help, please! Every day I have to reinstall Firefox!

  Hello Nastena, try a clean reinstall, some Firefox issues can be resolved by performing a clean reinstall. This means that you Remove Firefox program files and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

  • Also check if your antivirus or other access security software (firewall, antispyware etc.) blocks firefox.

  Thank you

• after update after effects cc 2015, the program does not start.

  Yesterday I did just a little update - now after update after that effects cc 2015 the program does not start. I have the message - aftereffex exe cannot start (0xc0000142) - an idea?

  Best regards

  Robert

  The update of the corrections after effects CC 2015 (13.6.1) is available. It fixes several bugs, including one in discussion on this topic.

  Details: http://adobe.ly/1QqMMc6

  Let us know how things work after installing the update.

• my power green LED flashes and the laptop does not start

  Mr President, I have laptop computer Sony vaio, when I press the power button, my power LED green light begins to blink, sometimes sometimes brighter Sun, but nothing else happened, my fan remains closed, screen remains black, just POWER green LED flashing, flashing in the same way as orange light flashes in case of in standby mode, it is usually solid green , but now it flashes and the laptop does not start, what should I do Sir...

  My model number is the model of Sony VAIO PCG-61911W... His VPCEG18FG of the product name

  ankurgupta53,

  It seems that your device is not post.  You can try reinstalling the ram or simply by using a single module at a time, but other that that the device would need service...

• Vista 64-bit Black Screen of Death, with just a mobile available slider, the system does not start in safe mode.

  My system worked properly on 25 April and then something happened and now the machine comes back with "Start menu options" but will not start in one of the listed options, modes result in the same outcome.  System also starts on the Vista CD.

  System begins to boot normally, shows the tracer Green Windows at the bottom of the screen, then the mouse pointer appears and moves but the rest of the screen remains black.

  That's it, that's all what he will do.  I checked the settings of the computer and ran the diagnostic tests available and everything seems to go fine and passes all the tests.

  I worked on my own computers for over 20 years and never been stumped before, but I must say this is a first, and I have no idea what to try to do it now.

  Help or direction is appreciated.

  original title: Vista 64-bit Black Screen of Death, with just a mobile available slider, the system does not start in safe mode.

  See if there is a way to tecover clean your data before doing a restore to conditions of factory that will wipe the drive of all.  You can use Knoppix http://www.knopper.net/knoppix/index-en.html with a good ISO as Copier: http://isorecorder.alexfeinman.com/isorecorder.htm as well as a blank CD (which you will need to do on another computer).  Starting on this disc and lla should give you enough access to the system (if you do not have any other means) to backup your important data.

  So since you seem to have no other alernatives, you can try retoring the original factory computer options. However, if it is a hardware problem as could very well be the case, you can still encounter problems after even this drastic step.  Then you will need to consider in a reputable computer repair shop (NOT Geek Squad or or a any of these big store centers) or maybe even go back to the manufacturer for repair.   Check out several options and compare the costs, quality and guaranteed and then make your best decision.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• The app on the market does not start, the page is white with some Blue Cross top left.

  The market does not start even on the internet.

  Hey Karin!

  I'm sorry you had to go through the frustration that you presented this nuisance. I am very pleased to hear that these steps solved your problem. =)

  Enjoy new applications you find on the market of Firefox. Here are a few suggestions that I find very useful, to help you get started:

  • Documents Viewer
  • Notes, you can synchronize with Evernote
  • PDF Viewer
  • File Manager
  • ConnectA2 to be able to chat with users of WhatsApp
  • Telegram, Open Source, cross-platform and safe customer chat
  • Dial.Radio, because all the world could use a little music on their lives

  Have a wonderful day and please feel free to post new threads in the SUMO forums, if you have other questions about your Firefox OS device.

  Thank you

  -Ralph

• I deleted the boot camp trying to resize the hard drive on my mac pro book. now, the computer does not start without a bootable device, which I don't have, and any download must be on a windows machine. Can anyone help

  I deleted the boot camp trying to resize the hard drive on my mac pro book. now, the computer does not start without a bootable device, which I don't have, and any download must be on a windows machine. Can anyone help

  1. did you remove Bootcamp using disk utility?

  2 have you tried local restore or recovery of the Internet? - OS X: on OS X Recovery - Apple Support . Mac with built-in optical drives may need 'Gray' disks to boot the system.

• My mini ipad 4 has no battery completely not discharged, called to the charger, but the system does not start. What should do?  Already a time connected to the charger, but the system does not start. I have iPad 3 months and never suffered no damage.

  My mini ipad 4 has no battery completely not discharged, called to the charger, but the system does not start. What should do? Already a time connected to the charger, but the system does not start. I have iPad 3 months and never suffered no damage.

  When connected to the charger make a forced reboot: hold the home and sleep buttons, wait for the Apple logo, release the buttons. May take a few tries.

• I installed the birth of nations gold on my new pc... it has windows 7. the installation was successful, but the game does not start... Please help!

  I installed the birth of nations gold on my new pc... it has windows 7. the installation was successful, but the game does not start... Please help!

  Hello

  1. what happens when you try to start the game?
  2. do you have messages or error codes?

  Follow the steps in the article mentioned below and check if this solves the problem.

  Known graphics issues in Rise of Nations
  http://support.Microsoft.com/kb/820089

• The Installation does not start! Error: Unable to launch vcredist_x86.exe

  Original title: the Installation does not start!

  My installation does not start. As soon as I put the disc in the drive, the installation wizard appears, but at this time there that weird noise comes from the disc. Then the this black window appears and the installation does not start. I got the game installed before on the computer. But he had problems, so I uninstalled the game. Then, when I tried to reinstall the game, it wouldn't install again. "And this error comes ~ could not launch vcredist_x86.exe".

  Help, please. Thank you!

  -Maryse

  Hello

  Please try to install the game in compatibility mode.  Here is some information that can be very practical...

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  -Check the functionality of the game under a spare user account

  Uninstall/reinstall the program

  -Clean Boot http://support.microsoft.com/kb/331796

  I hope that this information is beneficial.

  Thank you

  Aaron
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• 2000-2D02TU HP: HP 2000-2D02TU Power LED power switch but the laptop does not start.

  Someone help me.

  HP 2000-2D02TU Power LED power switch but the laptop does not start.

  What I'm doing.

  Please help me

  Model No. - HP 2000-2D02TU

  Hello @Alok_Bhai,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I read your post on the laptop won't start does not and wanted to help you!

  You indicate that the lights are flashing, but the laptop does not start?  If this is the case, try to review the following document and let me know how it goes:

  Computer does not start and emits a LED or beep Code

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• I want to install WIN 7 on my Dell XP computer. The disc I bought says that the hardsrive must be clean first. The disc does not start on the existing XP. How can I do this?

  I want to install WIN 7 on my Dell XP computer. The disc I bought says that the hard disk must be clean first. The disc does not start on the existing XP. How can I do this?

  Hello

  Have you changed the boot order?

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order and boot from the Windows 7 DVD:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  Do install a cleaning, removal of the existing XP partition and create a new partition to install 7 on in the own installation process:

  http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.html

  See you soon.

• How can I reinstall windows xp when the computer does not start and there is no cdrom/dvd drive?

  I have an Acer netbook aspire one.  It will not boot past the windows logo.  I have a windows xp disc to reinstall windows, but the computer has no CD or dvd rom.  Can I copy cd of windows xp on startup SD memory card and reinstall windows?  Or can I run connect the non working pc a working PC to access the cdrom on the work pc to reinstall windows?

  First of all, you are mistaken when you say that the PC does not start.

  This is clearly starting. The problem comes from Windows, not with the real PC. It's actually a very important distinction!

  There are methods to repair Windows, but they can be a bit tedious. By all means, follow the advice given here to do if you're so inclined.

  If you would not rather to repair Windows (and I think it's interesting a try) or your repair attempts are unsuccessful, apparently, you would need to use an external optical disc drive and follow the instructions here:

  http://Acer.custhelp.com/app/answers/detail/A_ID/2631