Get the message: "your ID Windows Live ID is unchangeable right now", during a change of Windows Live ID

Similar Questions

• When I try to connect to the net on my laptop LG I often get the message saying that windows could not connect.

  Windows does not remember the setting.

  When I try to connect to the net on my laptop LG I often get the message saying that windows could not connect and I have to go into the advanced settings and check the box that says allow windows to configure the network. My problem is that windows doesn't remember this setting and that I need to check the box almost everytime I try to connect. He made it with my desktop so I was wondering if anyone has a solution for this.

  Using a wireless router? What is the brand and model of your router? I don't think it's a matter of windows.

  Troubleshooting in windows wireless network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows

  Hope this helpful. Post back if your problem is not resolved in the link above.

• Windows Vista startup in the Boot Manager Windows Im getting the message of File:\windows\system32\winload.exe and this isn't the start of the DVD

  Original title: Windows Vista upgrade to Windows boot disk boot manager is located in the computer but will not start up installation disc

  Im getting the message of File:\windows\system32\winload.exe

  Hi WillieGuyton,

  (1) since when are you facing this problem?

  (2) remember to make changes?

  (3) what is the complete error message you receive?

  (4) what is the number of brand and model of your computer?

  Method 1:

  Step 1: disconnect any external devices (printers, scanner, USB (universal serial bus) readers, etc...)  Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  Step 2: Follow the steps mentioned in the link below to access pre - install the system recovery tools.

  How to access the System Recovery Options menu?

  Run the tool to restart system as shown in the link below
  How to use Startup Repair?

  
  Method 2:

  Step 1:

  Set the first boot device in the DVD in BIOS to boot from the Windows Installation DVD. To do this, see the documentation that came with the computer.

  Important: Change BIOS (Basic input output system) /semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Step 2: Follow the steps mentioned in the article below for the restoration of the Boot Configuration database (BCD) store

  Windows no longer starts after you install an earlier version of the Windows operating system in a dual-boot configuration

  http://support.Microsoft.com/kb/919529

• I get the message "process host windows (Rundll32) has stopped working" & "Windows Explorer has stopped working".

  When I go to one of the three users on a Vista Home system, I get the message "process host windows (Rundll32) has stopped working" & "Windows Explorer has stopped working".

  I ran SFC and chkdsk for this user, (took 2 hours) and it is not fixed. Help, please?

  I ended seting up a new user for my wife, the user who is messed up. and I overcame everyting execpt his address book/contacts. She wants me to fix the first. Help, please.

  SpamLessSN

  Hello

   
   
  Are what contacts/address address you referring to?
  
  Perform the following steps in order to correct the damaged user account
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
   
   
  Hope this information helps.
   

• I tried in several ways (in line, calls and return on this forum), but no aid has been granted on Edge inspect.  I get the message "your user name and password are incorrect, or your account has no access onboard inspect CC.  Any assistance

  I tried in several ways (in line, calls and return on this forum), but no aid has been granted on Edge inspect.  I get the message "your user name and password are incorrect, or your account has no access onboard inspect CC.  Any help is greatly appreciated.  One of my original case numbers were: 0216572509

  You need installed Adobe Creative Cloud. Check the link for more information below.

  Edge inspect FAQ EAC

• When I download and try to install Thunderbird, I get the message "your Thunderbird profile cannot be loaded, it may be missing or inaccessible.

  Due to a virus, I redownloaded 24.4.0 Thunderbird and it completed than in trying to open Thunderbird when I get the message "cannot load your Thunderbird profile. It may be missing or inaccessible. "I know that the profile exists in a folder"recovered files ". I tried to move to the current folder in Thunderbird, but get the same message. I tried to follow a Mozillazine article, but it's too complicated. Is there assistance online, such as chat or by phone?

  # It is not necessary to move the e00qmtzd.default.old for now.

  You can leave it in place and restore the C:\Restore file e00qmtzd.default.

• Get the message "your profile cannot be opened properly. Some features are available. "in the Chrome browser.

  When you click on my chrome browser, I get a message, "your profile cannot be opened properly. Some features will be may not be not available '... of ideas?

  C:\Documents and Settings\Settings\Application Data\Google\Chrome\User data< would="" be="" for="" xp="" my="">

• Replacing hard drive, made restoration of the factory, get the message error "installing windows could not configure windows to run on a hardware on this computer."

  OS = Windows 7

  Computer = Gateway FX6840
  Media = gateway recovery media
  Hard drive is set to AHCI in BIOS

  I started meeting with S.M.A.R.T. errors.

  I backed up my data.

  I replaced 1 TB Seagate original with a new 2 hard drive to Seagate Barracuda SATA STBD2000101. Computer is equipped also is from the factory... no additional or modified facilities.

  I tried to restore Windows 7 from the rescue of the disks created with the "Gateway Recovery Management"

  Windows copying files over, the machine restarts, it installs the devices, then it stops at the "installation program starts services" and a window opens with the message "windows Setup could not configure windows to run on a hardware on this computer.

  I can't apply the Article ID: 2466753 because the process of restoration of the plant seems not provide an option to load a driver .

  Any help would be appreciated... Gateway is only interested to collect money.  They have no interest in serving the poor suckers who buy their products (computer is 2 years old so it is out of warranty).

  Thanks for the reply.

  Fortunately, I solved the problem myself (after 19 hours of stress).
  The problem is that the recent hard disk has something different that no longer ages and makes pre-service pack 1 (SP1 solves the problem) versions of Windows 7 incompatible. My set of recovery disks have been created the day I bought the computer, which had no windows updates installed at the time.

  There is an "easy solution" on the Microsoft support site: http://support.microsoft.com/kb/2466753/en-us

  Unfortunately, their method works only if you have a Windows 7 installation disc, which does most of the people who buy computers pre-built manufacturers. Essentially, the solution is to install SP1 from a disc when don't give you the possibility to load drivers during installation, an option that the gateway recovery disks.

  So I thought that, theoretically, if I use my recovery discs to get a clean install on a hard drive that works, then use windows update to get updated (or at least to get SP1), and then make a set of NEW recovery disks (using windows backup: start > all programs > maintenance > Backup and Restore), I should be able to use these discs to install the new hard disk.

  It worked.

  So for someone else who has this same problem with new hard disks, I hope that the above is easy to understand. If not, ask someone else more savvy and show them this thread. Do not forget that at the end to create new recovery disks, it will ask you if you also want to create a 'system' repair disc. DO THIS! This is the disk that you need to start from when you are ready to install.

  Also: If your new hard drive is bigger than the one that you have created the new recovery disks, the partition on your new hard drive (once everything is installed) will be the same size as the one that you have created the records on. You will need to use a kind of editor of score for re - size. I recommend Gnome Partition Editor. http://www.gparted.org

  Burn gparted Live CD and him, resize your partition, and you're done (google for more in-depth instructions).

  Thank you, theloungelizardK, for the offer on the ISO, but I don't need. :)

  Eastan - ITF

• On the OWN website of mozilla, I get the message "Your Firefox is out of date and may contain a security risk!' but I just download and install the latest version?

  I have the latest version of firefox to date (15/10/2014 v32) and I still get messages while on various sites Internet (Youtube, Google, Gmail), telling me that your Firefox is out of date and may contain a security risk.

  I have not even this message on the support pages of mozilla.org?

  I tried the subject: config reset the useragent (s) fix, but it does not work.
  I tried browsing in safe mode and still get the error.

  Why this false/positive happening?

  Thank you

  Hello your useragent (information, the browser sends to websites to identify its version) - apparently by mistake - shows this:

  Mozilla/5.0 (Windows NT 6.1; WOW64; rv:2.0.1) Gecko/20140923 Firefox/4.0.0; xs-A30GTmfXR3o;CkHZPf;
  

  probably some kind of unwanted software has crashed it. Please refer to this article in order to reset the user agent settings in firefox:
  Sites Internet says that Firefox is obsolete or incompatible, even if it's the latest version

  in case this is not enough, please try to reset the whole browser:
  Firefox - modules to reset and refresh settings

• All of a sudden get the message saying my windows 7 is not genuine?

  I bought this copy of Windows 7 Ultimate (updated version) nine on amazon. I used it to upgrade the windows 7 Home premium, which is installed with a new laptop. The laptop was purchased directly from Toshiba so I'm reasonable sure it is authentic. It was a little embarrassing turn on and had to be done by phone to Microsoft. He was well until the message no real work appeared two days ago. The diagnostic below report indicates what could be the problem? I still have the original 7 key ultimate disc and thus that domestic product premium oem version supplied with the laptop. I also found slui.exe does not, nor has the link change product key in the windows activation section. ???

  Diagnostic report (1.9.0027.0):

  -----------------------------------------

  Validation of Windows data-->

  Validation code: 0x8004FE22

  Validation caching Code online: n/a, hr = 0xc004f012

  Windows product key: *-* - RPXBQ - D8FWK-9D47V

  The Windows Product Key hash: xyrL3h5FyhOBsEhMlPptozn1Y8A =

  Windows product ID: 00426-074-5926643-85695

  Windows product ID type: 5

  Windows license type: retail

  The Windows OS version: 6.1.7601.2.00010100.1.0.001

  ID: {D5824B5A-7B3F-4AAB-B718-A5CE790A76D3} (3)

  Admin: Yes

  TestCab: 0x0

  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002

  Signed by: n/a, hr = 0 x 80070002

  Product name: Windows 7 Ultimate

  Architecture: 0 x 00000009

  Build lab: 7601.win7sp1_gdr.111118 - 2330

  TTS error:

  Validation of diagnosis:

  Resolution state: n/a

  Given Vista WgaER-->

  ThreatID (s): n/a, hr = 0 x 80070002

  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->

  Cached result: n/a, hr = 0 x 80070002

  File: No.

  Version: N/a, hr = 0 x 80070002

  WgaTray.exe signed by: n/a, hr = 0 x 80070002

  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->

  Cached result: n/a, hr = 0 x 80070002

  Version: N/a, hr = 0 x 80070002

  OGAExec.exe signed by: n/a, hr = 0 x 80070002

  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->

  Office status: 109 n/a

  OGA Version: N/a, 0 x 80070002

  Signed by: n/a, hr = 0 x 80070002

  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->

  Proxy settings: N/A

  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)

  Default browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe

  Download signed ActiveX controls: fast

  Download unsigned ActiveX controls: disabled

  Run ActiveX controls and plug-ins: allowed

  Initialize and script ActiveX controls not marked as safe: disabled

  Allow the Internet Explorer Webbrowser control scripts: disabled

  Active scripting: allowed

  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->

  Office details: {D5824B5A-7B3F-4AAB-B718-A5CE790A76D3}1.9.0027.06.1.7601.2.00010100.1.0.001x 64*-*-*-*-9D47V00426-074-5926643-856955S-1-5-21-3935993167-2126870205-1677796191TOSHIBASatellite P770DTOSHIBA1.1020110513000000.000000 + 000FB8A3007018400FC04090409US Mountain Standard Time(GMT-07:00)03TOSCPLTOSCPL00109

  Content Spsys.log: 0 x 80070002

  License data-->

  C:\windows\system32\slmgr.vbs(22, 1) (null): library not registered.

  Windows Activation Technologies-->

  HrOffline: 0x8004FE22

  HrOnline: n/a

  Beyond: 0 x 0000000000000800

  Event timestamp: 3:16:2012 20:25

  ActiveX: Registered, Version: 7.1.7600.16395

  The admin service: recorded, Version: 7.1.7600.16395

  Output beyond bitmask:

  Tampered files: Check %systemroot%\system32\slui.exe|slui.exe.mui|COM

  --> HWID data

  Current Hash HWID: MAAAAAEAAQABAAEAAAACAAAAAwABAAEAonZq2hIlugu + Pt7DYj0Qd5a1bOguEgBq

  Activation 1.0 data OEM-->

  N/A

  Activation 2.0 data OEM-->

  BIOS valid for OA 2.0: Yes

  Windows marker version: 0 x 20001

  OEMID and OEMTableID consistent: Yes

  BIOS information:

  ACPI Table name OEMID value OEMTableID value

  APIC TOSCPL TOSCPL00

  FACP TOSCPL TOSCPL00

  HPET TOSCPL TOSCPL00

  MCFG                                 A M I                     GMCH945.

  SLIC TOSCPL TOSCPL00

  SSDT AMD POWERNOW

  SSDT AMD POWERNOW

  Ignore the error message. It will be always copy and paste.

• Windows 7 Home premium install the update. When I reboot the update tries to install, but fails. I get the message "failure of windows update Setup, reverse the change.

  I tried to copy the CBS.log to a folder, then opening the files to search for an error code. I couldn't find any error code. These files are large I can remember something small.

  Try this first: -.

  Open the Windows Update troubleshooting tool
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  If no joy, then

  1. open Windows Update by clicking the Start button, all programs and then click Windows Update.
  2. in the left pane, click view update history.
  3. find an update for Windows that has failed to install, and then double-click the update to view more information.
  Updates that have failed to install will display failed under status, next to the name of update.
  4. in the Windows Update dialog box, next to the details of the error, review the error code for the update has failed.
  5. follow the links in the dialog box of Windows Update as more information or help and Support to try to resolve the problem or post back with more information on what the error code can be.

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Connection to Hotmail, get the following error "he has a problem with Hotmail right now."

  said Hotmail site has a problem (for 30 hours now?)

  for 30 hours, I continued to receive a message when I tried to log on my hotmail by saying: "Sorry, there is a problem with Hotmail right now" do not know what to do.

  Hi endgame6,

  Thanks for posting your question in the Microsoft answers Forum. For any question on Hotmail, please visit the following link:

  http://windowslivehelp.com/forums.aspx?ProductID=1

• After signing into Hotmail to access my account, I get a message "Sorry, there's a problem with Hotmail right now."

  After registration to Hotmail.com by username correct ande real password, I got a message that "sorry, there is a problem with Hotmail right now.

  Hotmail was not able to complete this application. Microsoft may contact you about problems that report you. »

  Hi JeffStern,

  Thanks for posting your question in the Microsoft answers Forum. For any questions about Hotmail, please see the Forums of Hotmail.

• I am trying to install windows on my Mac Book Air 2014 10 and I get the message "your drive could not be partitioned.

  When using Boot Camp, I proceed to the stage where he made the partition. I'm out 19 concerts for OS X and the allocation of 50 GB for Windows. I deleted all other external drives then the flash drive that has the Windows ISO and I keep getting an error. I already did a disk repair and remove all external hard drives as well as drop-down list and good road. Help please!

  

  Can you OSX boot without failure - try safe mode if your Mac does not commissioning - Apple support - and start normally and try again?

  Please after the release of OSX Terminal commands.

  diskutil list

  Cs diskutil list

• Get the message that my Windows 7 can be counterfeit

  After 5 years earlier to have Windows 7 installed on this computer, I have a message saying that it is not authentic.  Then, I get a window asking me to validate, but the "run" box could not check the origin.  I know that this is a valid software, since I got directly from Microsoft.  What should I do?

  Andre:

  Thank you for that comprehensive answer.  Unfortunately, it is too technical for me.  I made no changes to several months; This just today.  When I bought my laptop, it's VISTA and since Windows 7 has been out in a month or two, I got Windows 7 for free and it has been downloaded directly from Microsoft.  It was 5 years ago, and I had no problem until today.  When I tried to validate as requested by the system of the "run" box says that he could not verify the sender, so I stepped back.

  Any ideas? Remember, keep things simple.

  Thank you

  Carol

  Carol, I suggest following the instructions of the phone.  Just stay silent as the voice of the computer asks you questions, and finally you will be asked if you want to be transferred.  Answer at this time, with, "Yes!"  Explain your situation to the operator and he or she will give you probably a very long code to enter to get through activation.  I just did all of this with great success, but I'm still puzzled why I had to go through this in the first place