After that Trojan off firewall cannot reactivate it

Similar Questions

• Satellite L750-1E5 - after that turn off the led at the front lights up

  Can someone tell me why the light in front on my laptop stays on after I've stop it?

  It s the light next to the power icon and after I ve closed the light changes from white to orange and stays on even though I ve removed the charger (it doesn't blink or dim). The laptop is only 1 month and he has not done this when buying.

  Help, please!

  Hello

  Please check this:
  

  and tell us which LED is always on when your laptop is turned off.

• Put on after that Trojans moved to Virus Vault

  Start up / Boot Up I get three small windows since my package of viruses AVG moved 3 Trojan horses in quarantine. (1) LOADING C:\WINDOWS\msiskbdf.dll---ERREUR. (2) LOADING C:\WINDOWS\udusamoqix.dll---ERREUR.       (3) fjof.sto - the specified module could not be found. QUESTION:-what can I do so that these 3 windows do not appear.

  These files were probably part of a virus or spyware infection that has been partially removed. You can use the free Windows Sysinternals Autoruns tool to find and remove references to these.

  For more information about how to use the Autoruns, please see:

  Autoruns for Windows Windows Sysinternals Autoruns Forum

  Boulder computer Maven
  Most Microsoft Valuable Professional

• HP Officejet 5740: after that 10 updated iOS, cannot print from the iPad

  Hello

  I've updated my iPad to iOS 10.1.1 2 Air.  I can't print remotely.  It runs from my other devices (phone, Macbook Air) Apple which have not been updated to iOS 10.  I use AiO Remote.  The iPad recognizes the printer and the IP address is correct.  I was able to print from my iPad yesterday until I updated.

  I appreciate your help.

  Hi @AllanAAB,

  Welcome to the HP Forums!

  I came across your post where you are unable to print from the iPad after iOS update. I would like to help.

  Please refer to this article http://hp.care/2bSjSnW , he explains how to use AirPrint and also troubleshooting steps to solve the problems with it.

  Recommend that you remove the printer from the iPad, and then reconnect the printer on the iPad. (Display settings and select Wi - Fi, if the printer is listed, click on the i on the right side of the printer that there are listed and select forget this network/printer.) And reconnect the printer)

  Restart the router, printer, and iPad. I'm sure you could have already tried this.

  Also, look for the printer firmware updates (if applicable, on www.hp.com/drivers) and also check if there are other updates released by Apple via iTunes.

  Remove the HP all-in - One Printer remote app on the iPad and reinstall it.

  Let me know if this helped.

• After that the BIOS update cannot start my Satellite L305-S5885

  Last night I've updated the BIOS of my laptop, but when the completed BIOS flashing, she restarted Windows. The machine could not start. The CD/DVD device go into a cycle with a yellow light and the screen does not appear anything. Can someone help me solve this problem.

  Old Bios: v1.40
  New Bios: v1.50
  OS: Windows XP with SP3

  I can't use the CD/DVD device to start with a Win PE.

  Thank you

  Hello!

  I think that the BIOS was not correctly because your computer laptop doesn't start up again.
  In this case, you can make t a lot of.

  Try this: remove the battery and the AC adapter, wait up to 1 hour and then connect the battery and AC adapter. Try it again and hope it works.

  If this does not work, you should contact a local ASP. In the worst cases, the motherboard must be exchanged :(

  Welcome them

• After that update the BIOS cannot reboot my Satellite A200

  I did the bios update for the trueearnings tol, just instructrion restart so I can't reboot my computer, then, what can I do?

  Hello James

  It sounds pretty bad for me. It is typical behavior if the BIOS is damaged.
  What you can do? Unfortunately not much besides make the closest meetings of Toshiba authorized service provider and ask for help.

  I'm sorry. :(

• Posted on a Trojan horse: js/medfos.b elsewhere. Now just discovered. that my firewall cannot be manufactured. Help!

  Having a persistent Trojan horse: js/medfos.b...asked to this topic on another post.  Now have discovered that my Microsoft Firewall somehow has been disabled and I can't turn it on... How can I get the firewall of my machine is working again?

  Hi William,.
  First, remove the infection: http://www.selectrealsecurity.com/malware-removal-guide
  Then follow these instructions to fix the Windows Firewall:
  Download and install Windows repairr:
  http://www.TechSpot.com/downloads/5314-tweaking-Windows-repair.html
  When the repair of Windows opens, click on the tab to start repairs, click Start. Unselect all the boxes except for the following:
  -Reset the registry permissions
  -Reset the permissions of files
  -WMI repair
  -Repair Windows Firewall
  Then click Start. Once it is finished, restart your computer. Let me know if this helps you.
  Brian

• After the attack of virus cannot activate Windows Firewall

  Something has attacked our copmputer. We have done several virus scans to correct the problem, but we cannot yet turn on the firewall on, what can be the problem?

  Hello

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and use scanners online and other methods.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntiSpyware Portable Scanner - free
  http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

  AdwCleaner
  http://www.bleepingcomputer.com/download/adwcleaner/
  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Scan online ESET
  http://www.eset.com/onlinescan/

  Scan Kaspersky online
  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ======================================

  If necessary AFTER THAT you are sure that the machine is clean of any malware.

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Windows Firewall: get the message that the firewall cannot be activated because a "service is not associated with running.

  In the last days is message that my computer is not protected by a firewall. I followed the recommendations to enable the windows firewall (both through the alert procedure and the control panel); but get message that the firewall cannot be activated because a "service is not associated with running.

  I'm usually protected by the free AVG service and its protection of identity theft.

  How can I recover the windows firewall?

  How to turn on the windows firewall?

  1. Open Windows Firewall by clicking on the button start , clicking Control Panel, clicking Security, and then clickingWindows firewall.

  2. Click turn on or off Windows Firewall. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. Click on (recommended), and then click OK.

  If you want the firewall to block everything, including the programs selected on theExceptions tab, select theBlock all the incoming connections checkbox.

  WARNING: More than a firewall running at the same time program could lead to conflict. It is best to use a firewall program.

  If this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• BlackBerry Smartphones backlight turns off after that I have a dial

  Whenever I have dial a number, the backlight turns off until the time wherever I disconnect. So if anyone wants any information about me that is stored on my phone, I can't just read from the phone. I got to wait for the call ends, find the info and then call them back!

  What is the use of call waiting if I can't see who's calling while I am already on another call.

  It's frustrating, I tried Googling, but have not been able to solve this problem. My bb torch is only 7 days old!

  Help, please!

  p.s. extending the duration of backlight in 'options' doesn't help either.

  Your flashlight is not only a smartphone, it's a "smart phone".  When you dial a number and place the phone in your face, the photocell detects this and turns off the display to save battery power.  If at any time you need to remove the phone from your face during a call (to add some numbers or receive another call, etc.), your phone reactivates the backlight, so you can see what is on the screen.

  If this isn't the case for you, remove the battery while your phone is on, then replace it (to do outside of a call, not on a call).  Try once more after that to dial a number.

  Let us know if that helps you.

• I cannot install extensions, they appear with "will be installed after you restart Firefox" even after that I restarted.

  Hello

  I cannot install extensions, they appear with "will be installed after you restart Firefox" even after that I restarted.

  The 'Intermediary' folder is present and rest after a restart, but the extensions do not get installed. They show in the extensions page with the message "will be installed after you restart Firefox" and remain like that, no matter how many times I restart.

  Any idea?

  Under Firefox 24.0 Windows 8.1

  Thank you very much
  BD

  P.S. Just tried to install the add-on "convenience store" before asking the question and I got an error saying that it cannot install because it cannot change the necessary file. (I did manually instead)

  I tried to delete the files extensions.* nothing works. However, I deleted the addons.sqlite file and restarted my computer (computer not only Firefox) and that seemed to do the trick. Problem solved.

  Thank you for your help, it is appreciated.

• Satellite M200 screen turns off after that start & battery does not charge

  Hello, I am from Jakarta, Indonesia
  I have a problem with my Toshiba Satellite M200 Notebook (running Windows 7 Home Premium)

  After I press the power button to the top of my laptop, it works fine display BIOS and Windows startup screen.
  but after that my monitor off all of a sudden when Windows is supposed to show the login screen.

  Sometimes, the monitor doesn't turn off, but shows a lower resolution (I don't know exactly what resolution, 1024 x 768 or 800 x 600, i use maybe 1280 x 800)
  so the only thing I can do is, press the power button to stop bad then press power again turns on, my monitor works normally
  try to stop and then turn on again in a few hours later, problems still comes once.

  from the moment where I install Windows 7, I use 8.15.10.1930 version of the driver (downloaded from Download Center of Intel, which included Assistant TV Intel)
  2 days ago, my friend told me that I should install the driver from the Toshiba site support, so I went to csd.toshiba.com and download the 8.15.10.1825 version of this site (which is not included Assistant TV Intel)

  my monitor works normally after I installed the driver I of csd.toshiba.com, so I think that the problem because the Intel TV Wizard somehow messed with my laptop. But this morning this problem once again, my turns just monitor suddenly...

  In addition, this problem seems to be my battery was unable to recharge, my completely reloaded Windows shows, but when I plugged my AC adapter,
  There are 15-20 minutes before my laptop turns off automatically

  Three months ago, I just brought my laptop to the local Service Center of Toshiba and bought the new motherboard to replace my old mobo (which have a VGA problem too!)
  Is there something I can do (related to Windows or driver/software) or I can bring my notebook at the center of service again?
  are they somehow an incorrect wiring when replacing my motherboard?
  and am I need to replace my battery too?

  I use this laptop for about a year and a half and there is nothing wrong with my battery before replacing the motherboard

  any help would be appreciated :D

  Hello

  Talk about your screen, the a graphics driver causes this malfunction with resolution and turn off. Go to the page of the toshiba driver and download the correct Vga driver for your model. I see, you are running Windows 7, if there is no driver for win7, try the vista driver.
  On your power supply, you have used for the year and a half and he is released in 20 minutes, there is nothing strange. It's standard for power supply operating period, need to be replaced. Just to be sure, you can check with a new battery. You will see that the trick works as expected.

  Welcome them

• Apple ID disabled after that contact iTunes support for transaction cannot be complete

  OK my thread before all my problem that I can't buy the itunes gift card... Now, a big problem happens.

  so my problem has been resolved and I can sent a gift to my friends, but then the error came again. I contact apple support chat and they even said as before. And surprisly, they ended without me confirming my cat! After that when I try to download a free app on the appstore a pop up show that my ID apple has been disabled! What a great shame. So maybe the support do not like me and they disable my account? Apple very embarrassed, very ashamed. I feel the support treat me like a thief. Perhaps, I buy a gift with my credit card!

  I hope someone from apple read this and help me solve my problems.

  Thank you

  Apple are not here, these are user forums.

  If it is disabled for security reasons: If your identifier Apple is locked - Apple supports (disconnect you, then back in anywhere after reset)

  If that is not set then contact technical support for your country and see if they can / will reactivate

• my iphone 5 works if connected to my charger, when I unplug it it stays on for a minute and then turns off, I can activate it after that but it turns off again. you wonder if it's my battery. I have already restored the phone, but it did not work. Help

  my iphone 5 works if connected to my charger, when I unplug it it stays on for a minute and then turns off, I can activate it after that but it turns off again. you wonder if it's my battery. I have already restored the phone, but it did not work. Help

  Most likely, the battery is broken. With AppleCare +, a replacement of the battery is free. However, without AppleCare +, a replacement battery will cost $79.

  Apple-Support - iPhone - battery and power: https://www.apple.com/support/iphone/repair/battery-power/

• Windows Update has encountered an error and cannot display the requested page after that I click on express update.

  Original title: page Web update always comes back also cannot display the Web page after that I click on express update.

  Page Web I cannot update. Obviolsy I have access to the internet. I tried this several times. I have reintalled windows and I need update Inorder for programs work. Help. I have IE8. XP pro74 free concerts on drive c 400gigs e and d

  Is this the same computer as in this thread previous & abandoned of yours? -Online http://answers.microsoft.com/en-us/windows/forum/windows_xp-networking/remote-desktop-wont-connect-win-7-to-win-xp-pro/d0995287-356b-4e1f-aa51-1813625b4014