After the clip in the timeline, there is no audio track of the clip more

Similar Questions

• Blue screen issue started after the warranty more

  Hi I bought a HP laptop and exactly after the warranty period, there is a problem.

  And provided HP customer support a lot of drivers to install but not working.

  Seems that if we extended the guarantee we will get the right driver to install.

  My previous laptop was HP, so I got another. and now, I shall not repeat this error.

  Any soln for blue screen.

  Kind regards...

  Depends on the blue screen.

  You are able to write code for the blue screen error?

  BSOD (Blue Screen Of Death) tend to be caused by software problems, so there may be an easy solution to the problem. However, they can also be caused by serious hardware problems that may be more difficult to correct. In all cases, we will need the code error to determine what went wrong.

• Timeline between video and audio tracks splitter

  The separator between the video and audio tracks on the timeline is very difficult to see. Although it is thicker that other lines of demarcation is not yet clear enough for many people. Y at - it anyway to change the color of the "divider". Does anyone know of a plugin or a workaround may achieve this result? Ideally, we should be able to change the thickness and color so that the timeline between the video and the audio division are visible immediately by glancing at the screen. Can anyone help?

  Unfortunately, no thickness and color cannot be changed, and I've never seen a plugin to enable this. Sounds like a feature request for me!

  Feature request/Bug Report Form

• No audio track appears when I drag the clip to the timeline.

  Hi, this problem has just. When I try to put a video file in the timeline, only the video portion appears. I tried different types of video file, and the result is the same. I still have PP CS4 and experimented with the same movie files, and it works perfectly. This is probably a simple solution, but I've exhausted all my ideas. Help, please! I'm under PP CC. Thanks in advance.

  See here:

  FAQ: Why no audio or video will not at the track where I let down?

  After the clip in the timeline, there is no audio track of the clip more

• How to find max Crest audio audio tracks combined with the applied effects?

  Hi all

  I work in the CS5.5 body.

  Often when I'm working on a timeline, I have two audio tracks of the same songs, one of the camera and the other a separate, synchronized sound recorder on the timeline, so that they combine into a single signal. Applied to these titles, I might have an effect filter or high-low pass EQ. Now, I know that the maximum peak of each track or the individual clips is easy to find using the "Gain Audio" menu item, which I hope is the equivalent of this item of menu but related to the final output after two signal tracks has been added and effects have all served? It is a task that is very painful to have to listen through the entire timeline to discover if the output goes into 0db, if there was a way I could locate on the timeline where the max output, which would definitively solve the problem.

  Find the way to do this would literally save hours per project! It's the only thing that makes me groan inwardly when I perform the output volume, what I have to do most of the time.

  If all goes well,

  Peter.

  I always put a compressor and - 1db limiter of ridges on the master to stop overmods.

• The audio track to video1 moved to audio2, why, and I can restore to audio1?

  The audio track to video1 moved to audio2, why, and I can restore to audio1?

  John

  Now, I know what you did and what happened.

  The key was when you wrote

  . I think that's all happened after I had added another audio track

  When you right-click close a numbered audio track name and select Add titles in the context menu, you make your selection

  a. Add the number of video and/or audio tracks

  b. development: before first track or after last range

  Here are the scenarios given when there are 3 audio tracks by default 3 video. If you have video related to audio in 1 Audio video 1

  To get your result

  You must have used

  Add track

  Video add 1 before the first track

  Audio add 1 before the first track

  

  To overcome this situation where the content of the video 1 is linked to 2 Audio content when you decide to add an audio track to the timeline

  1. right click on the items in this undesirable state, select Delete Audio and video of the pop-up menu links, pass the audio not coupled 2 Audio to Audio 1. Align the video and audio as they were originally...

  2. Select video 1 and Audio 1 at the same time, right-click anywhere in the selection and select the Audio and video connection from the drop-down.

  If you had selected instead

  Add track

  Video add 0 before first track

  Audio add 1 before the first track

  you would have gotten

  

  Note the arrangement that created this way.

  What are the details of what you asked to do? Explore and experiment with the video, add titles or audio track number and investment options.

  Please consider.

  Thank you.

  RTA

• Clips added to timeline have no audio track (beginner CS6)

  I don't know how I did it but I am adding clips to a file of simple media using the source window (brand, mark, insert) to the timeline, but it is not inserting the corresponding audio track.

  Audio plays well in the source window, although I noticed that at one point it was a rattling noise is played while I was using the cursor keys to navigate through the media in the source window.

  I checked and there is no audio track disabled. They are all empty.

  1. what I am doing wrong?

  2. is there a way to add audio without having to go through the whole process to mark the clips and add them to the timeline again?

  You have the appropriate audio tracks identified and mapped?

  

• Continue after the end of the Movie Clip on the timeline

  Hello:

  So far so good. But I need the timeline to keep playing after the end of my MC.

  From now on chassis #45 of my calendar, I have this script on my scripts layer:

  / * Stop to this image

  The Flash timeline will be stop/pause on the frame where you insert this code.

  Can also be used to stop/pause the chronology of the movieclips.

  */

  Stop();

  / * Play a Clip

  Play the clip specified on stage.

  Directions for use:

  1 use this code for the video clips that are currently stopped.

  */

  Video.Play ();

  All so far works fine, but after the end of the MC (fl.video.FLVPlayback), it does not continue down the timeline to the end.

  Any help, please?

  Thank you very much.

  use:

  / * Stop to this image

  The Flash timeline will be stop/pause on the frame where you insert this code.

  Can also be used to stop/pause the chronology of the movieclips.

  */

  Stop();

  / * Play a Clip

  Play the clip specified on stage.

  Directions for use:

  1 use this code for the video clips that are currently stopped.

  */

  Video.Play ();

  Video.addEventListener (Event.COMPLETE, completeF);
  function completeF(e:Event):void {}
  Play();
  }

• Clips on the timeline in PP display color bars after the use of stabilizer warp?

  Hello, hoping someone can help here as I have tried and can't work on what I have done. I use CS5.5, 'replace with after effects', I used to send clips to AE, and then used the deformation of images of stabilse stabilizer. Effect could be seen on PP project and was going well. The re open my project some time later I noticed color bars showing on these clips on that I had used the warp, the play still clips stabilizer, but they show a brief shot of the colored bars. I think it may have started after I made my PP project? If I drag these elements in the source panel just as I see the colored bars is changing and still it will play in the workspace of the timeline, I tried to export to the encoder and all I get is the color bars. I'm sure I've probably made a simple mistake here, but I can't cope and hope someone can help me here.

  Thanks in advance

  Open After Effects clips projects are in and make sure that everything is fine.

• Playing several clips video one after the other on the main timeline

  Excuse the probably simple question but I'm just starting with Flash.

  I imported a few trailers directly in flash and saved as video clips.

  I want to be able to insert these clips on the main timeline and play one after the other, by repeating once they all played.

  In the main timeline, I put one layer for each clip and a keyframe where the clip is inserted for each layer.

  When I go to play the flash file, is to show the first frame of each movie file and before the first frame of the next movie file.

  What should I do to make the entire movie file flash game in this specific context before moving on to the next section where is the following file in the sequence, then to play all this film?

  Sorry for what is probably a simple thing to ask.

  Thank you

  Create a new layer actions on the timeline stop() and the main square. commands on this layer in each frame where resides a movieclip.

  In each clip, at the end (last image) you mean the main timeline to play(); While it moves to the next section (where it stops because of the stop() commands you add).

  If at the end of each movieclip you put either:

  AS2: _parent.nextFrame ();

  for AS3: MovieClip (parent) .nextFrame ();

  For the last movieclip in programming, you will replace nextFrame() by gotoAndStop (1);

• End of the short film after the last clip.

  USE: PE8 / WIN XP

  I'm new to PE but understand the Non-linear editing and made my first movie

  I have tried to look through the manual but cannot find the soliution to this problem:

  When I released a movie (tried the flash and MPG files), the final product runs on minutes after the end of all audio and video clips.

  I checked the track and there is nothing there after the end of the video.

  My film should be 04:59 (minutes)

  but

  ends up being about 05:47.

  http://www.YouTube.com/watch?v=RkD1YUeTngA

  How can I fix this?

  This may be due to the superposition of pictures still more video?  (Best estimate after skimming online help)

  And if so; WHY?

  Thank you.

  Mike

  Your work area bar is probably longer than your film. This can be a "ghost image" is floating some place on your timeline.

  Press the-key (above the Enter key) so that you can see your entire work area bar. Happening at 05:47.

  Click and drag your mouse over the timeline beyond your film. You should hang a few pictures at random. Remove them until your work area bar (the gray bar at the top of your timeline) snaps again at 04:59.

• Sansa Clip + Player ignores the titles with sound of frying after the last firmware update

  Hello

  My Sansa Clip + tracks audio playback stopped (same mp3 files it used to always play) after I updated to firmware 1.02.18A.

  The player jumps just all tracks with sound of frying one after the other.  No longer play.

  What's wrong??

  Is it possible to fix it?

  Is it possible to revert to the original firmware version 1.02.15 that worked well?

  Well,.

  I don't know what the problem actually was, but certainly it's associated BONE.
  I'm at home in my Windows 7 and everything works perfectly now.

  The problem I experienced was at work, where I have Windows XP SP3 OS.

  On Windows 7 home, I copy the MP3 files in MSC mode and don't play them no problem at all.

  Driver to work on Windows XP may be defective or unsuitable for copy files correctly on the drive using the MSC mode.

  I do not know. At least, everything works fine now.

  P.S. The funniest is that tech support lady told me that my drive is ruined and it is absolutely impossible to fix.

  She also said that it is impossible to install the previous version of firmware absolutelly and that it not there no previous version of the firmware available more she also said that the only way to "solve" the problem is for me to buy a new player

  Everything just great!

  Every1 thanks for your help.

• Time-video playback after the clip of transfer from Windows XP to Windows 7

  Original title: Windows XP movies play well on windows 7

  Windows XP movies plays not on windows 7

  Windows XP movies plays not on windows 7

  Hello

  What I mean with my question is I have movies or videos running on windows xp in .wmv format, wma. I migrated this clip for Windows 7 and there is a delay with a black window instead the videos before the video can show. Therefore, do not work well.

  Thank you

  =======================================
  Just a guess but maybe your video driver would need
  an update.

  Reduce the graphics hardware acceleration is a
  a simple way to test the video driver.  If there is one
  improvement... is a strong indication that your video
  driver requires an update.

  Proceed at your own risk *.

  (The basic steps for Windows 7 should be...
  Start button.
  Control Panel.
  Appearance and personalization.
  Display settings. /
  Advanced Settings.button.
  Troubleshoot tab.
  Change settings button...
  Click left/drag the acceleration hardware cursor for
  the left, one notch to the right of None / OK.)

  Now... try to play one of the video clips of problem and
  see if the problem is improved. After the test, return the
  slider to full.

  (Note: If you can't adjust the graphics hardware)
  Acceleration... that means you've got integrated
  Graphics and do not have a separate graphics card.

  In this case, you can always try to update video
  driver, but the best source would be the computer
  manufacturer or the manufacturer of the motherboard.)

  (For a real kick in graphics performance, installation)
  a separate video card may be something to consider.)

  To find an updated video driver, search support
  your manufacturer of computers and video sites
  card manufacturer for an updated video driver...

  The following article is maybe worth a visit:

  Update the graphic driver - Windows 7, Vista
  http://helpx.Adobe.com/Creative-Suite/KB/update-graphics-driver-Windows-7.html

  If you find a video updated driver... it would be a
  good idea to create a system before Restore Point
  install. Also be sure to follow any installation
  instructions which may be available on the download site.

  Good luck...

• No audio imported after the first clip

  I have been dealing with this problem for about 3 weeks now. I can import the clip with audio when I import the first clip, but eventually all the clips have no audio imported into the project.

  It's weird. I have not found someone online with the same problem. I use Pro CC first.

  I'll probably have to delete the application and reinstall it, but I was hoping that there is an easier option.

  There are two messages. Don't know if they will help you. I thought I've seen messages like yesterday and the day before. The links do not look like they will work, but they are a copy / paste of the browser window.

  https://forums.adobe.com/thread/1572614?q=no audio after first clip

  https://forums.adobe.com/thread/1441198?q=no audio after first clip

• rearrange tracks, moving clips in the timeline each on its own track

  Hello

  A few simple questions.

  (1) how to reorder the video tracks?

  (2) how can I move clips from the bin of media in the timeline so that each clip runs on its own track instead of one after the other on a track?

  (3) how to cut a stereo audio track to two mono tracks?

  Thank you!

  Saami

  Select & cut content that you are moving. Then, with only the target destination track and the playhead to the correct location, paste.

  Or, if you prefer click and drag, then enlarge the window on your screen and maximize the timeline panel. If you're still not popular enough, move the separator between the audio and video sections down. If that still does not show enough, then you need to add empty a track in the middle and move the content in two steps.