After the creation of QR Code, when I instead of the Code, it is empty

Similar Questions

• Satellite M50D-A-10W does not start after the battery is completely empty

  I have a laptop Toshiba Satellite laptop Satellite M50d-A-10W AMD A, 15.6.

  I have problem when the battery is completely empty I have to use the needle achieve hard reset the switch behind the laptop... so I can't enter in bootmode with f2

  How can I solve the problem?

  Thank you

  I guess you are talking about the shutdown procedure force as described in this document:
  http://APS2.toshiba-tro.de/KB0/TSB3C03JR0000R01.htm

  This problem can appear in case the PC freezes, do not start or has a power failure.

  I think that the laptop turns off in case the battery is completely empty. In this case the system does not close properly.
  As the default state, the system keeps laptop but usually the unit carries out a stop of the hybrid. This procedure allows the laptop to start much more quickly, but it could affect the system startup in case something goes wrong during the process of closing.
  You can disable this hybrid mode and in my opinion, it is also recommended.

  Details:
  http://APS2.toshiba-tro.de/KB0/TSB2B03EY0002R01.htm

  However, to avoid these problems, it of very important to correctly perform the closing procedure.

• Windows empty creative cloud after the first installation. where is the problem?

  Hi all, I have install a creative cloud of the trial for lightroom, but after the windows installation is empty, so I can't install lightroom. where is the problem? can someone help me?

  --

  Arturo

  

  As the primary diagnosis, try to remove the file opm.db once and check.

  Launch the Task Manager, to terminate any process like the creative cloud, CoreSync Adobe related to... etc.

  Then follow the procedure below:

  Press Windows button (located between Ctrl and Alt buttons) with the key R together at once, you will get a command window.

  Type below command and press the enter"" key.

  AppData

  It will open the Appdata folder.

  Then go to the Local > Adobe > OOBE. OOBE folder and delete "' Opm.db ' file."

  Once you had deleted opm.db fIsland, relaunch the application Adobe Creative Cloud and check.

• URGENT::opening multiple files - i have 3 files in my directory... When I run the code I can open a file and read it... but the while loop get blocked after the first iteration... can someone me help or give some indications

  bbmChatDB of public database;

  public static FileConnection fconnRead = null;
  public static String fileReadData = "";
  public static InputStream is = null;
  data Byte [] = null;
  DataInputStream is = null;

  Here is my code...

  I have 3 files in my directory... When I run the code I can open a file and read it... but the while loop get blocked after the first iteration... can someone me help or give some indications

  try {}

  FileConnection fc = Connector.open("file:///store/home/user/documents/BSM/") (FileConnection); "

  If (fc.exists ()) {}

  Enumeration e = fc.list ();

  While (e.hasMoreElements ()) {}

  System.out.println ("files are:" + (String) e.nextElement ());

  play this file
  StringBuffer stringBuff = new StringBuffer();
  try {}
  System.out.println ("opening file")-;
  System.out.println ("file name is:" + (String) e.nextElement ());
  fconnRead = Connector.open("file:///store/home/user/documents/BSM/(String)e.nextElement(),Connector.READ_WRITE) (FileConnection);
  System.out.println ("data length")-;
  If (fconnRead.exists ()) {}
  is = fconnRead.openDataInputStream ();
  data = IOUtilities.streamToBytes (is);
  Ddd = new String string (data);
  fileReadData = ddd.toString ();
  System.out.println ("length of data:" + fileReadData.length ());
  System.out.println ("read data :" + fileReadData);

  }

  } catch (IOException ee) {}
  ee.printStackTrace ();
  System.out.println ("Exception in the read data :")
  + ee.getMessage ());
  }

  }
  }

  } catch (IOException e) {}

  e.printStackTrace ();
  }

  {Finally

  try {}
  If (is! = null) {}
  is. Close();
  }
  System.out.println ("is closed...");
  } catch (IOException e1) {}

  E1. PrintStackTrace();
  }

  If (fconnRead! = null) {}
  try {}
  fconnRead.close ();
  } catch (Exception e) {}
  System.out.println (try ());
  }

  }

  }

  You can recode this treatment so that it uses only:

  e.nextElement ())

  Once a loop iteration.

  Directly at the start saying something like:

  String fileName = e.nextElement ());

  and use fileName everywhere in your loop.

  Also be aware that printStackTrace() will do nothing in your situation, it only works if you catch Throwable.  So make sure you something output all your catches exception and also have a catch (Throwable t) to catch the things you miss, as follows:

  {} catch (Throwable t)

  t.printStackTrace ();

  System.out.println ("Eception exception:" + t.toString ());

  }

  I think your code is thrown an exception and you don't see it.

• I have a serial number and request code when I bought Adobe Acrobat of TechSoup. For some reason, I can't post it after the download, and now I can't use it yet at all. Please notify.

  I have a serial number and request code when I bought Adobe Acrobat of TechSoup. For some reason, I can't post it after the download, and now I can't use it yet at all. Please notify.

  What is the exact error you get when you enter your serial number?

  Chat support: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Satellite U500 - Code 52 after the installation of recovery

  Hello

  I tried to reinstall my U500. After installtion some devices work not (code 52 in Device Manager).

  It is related to driver signing. When I imagined "disable driver sign" in the F8 boot menu some of them work properly.
  I tried to change bcdedit to ignore driver signing with no luck.

  Please notify.

  Long ago, I had the same machine. I got it several times but I never noticed this problem. did you notice immediately after the recovery image installation or later, after connection to the installation of Internet and Windows updates?

• Pavilion Media Center does not restart after the full system recovery. get the error code 0 x 4001100200001005

  Pavilion Media Center does not restart after the full system recovery. created recovery disks when purchased new. get the error code 0 x 4001100200001005

  Original title: recovery problem

  Hello

  According to the HP Support Forums, this error may be to do with the hard or for other reasons.

  You never have it replaced with a no HP bought in car?

  Read these threads HP on your error code:

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/recovery-disk-error-0x400110020000-1005/TD-p/22936

  http://h30434.www3.HP.com/T5/desktop-recovery-reply-only/trying-to-recover-an-old-PC-error-code/TD-p/964509

  If the original hard drive, press F11 at startup to start the process of recovery partition HP, did you recovery disks of.

  See you soon...

• Cannot enter 'log-in' page after the upgrade of VISTA SP1 x 32 SP2 with failure code 0xc0190036 340/47122 (explorer.exe)

  I was "forced" to upgrade my computer to SP1 to SP2 when I tried to download the latest msn who.

  The upgrade part wasn't serious and VISTA asked me to restart my computer after the upgrade. Then I REBOOTED.

  The problem came when the final stages of the upgrade, which took part after reboot. It was somewhere near STADIUM 1/3 or 2/3 and then suddenly all blackened. I'm POSITIVEMENT SAFE that my computer is connected to the power supply (mine is a laptop). And then when I start to restart my computer (the second time), I got this message

  0xc0190036 340/47122 (explorer.exe)

  Then I restarted and I got to a page where windows told me that my computer is not able to be marketed with success because of the recent changes I made.

  I did an upgrade from the night before, where I update the OFFICE GENIOUS sthsth (sorry, but I forgot the name). I need to upgrade this thing in order to be able to upgrade to SP2 (complicated huh? lol)

  I tried to use the recovery thing and save the thing but WINDOWS insisted that I do not have a recovery... I would say is quite disappointing...

  COMPUTER:

  HP 2133 NetBook

  VISTA HOME BASIC run x 32

  I ' ve done some searching on the web but found nth related code 340/47122 and VISTA HOME BASIC x 32 and SP2...»

  The last method I want to use is the method of parameters factory reboot, restore... so here I am, ask help from experienced users. I don't have any DVD or CD ROM for the restart or what. any method that can safe me to restart my computer?

  Million thanks,

  momikoo :)

  Hello

  Method 1:

  I suggest you to check if you are able to start in safe mode or last known good configuration. Follow the steps mentioned below.

  a. restart the system and keep tapping F8 until you reach the start menu.

  b. Select secure known mode/last good configuration in the list and press ENTER.

  Method 2:

  I suggest you follow the steps mentioned in the link given below and let us know if your problem is solved.

  Error code on a black screen when you try to install a Service Pack in Windows Vista: "0xc0190036."

  http://support.Microsoft.com/kb/975430

   

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• JAD params of the reading of the JAD file that is changed after the cod file is built?

  Hello

  We have a requirement in which, you must change the jad file, after the cod file is generated.

  But when I try to do is not able to read the newly added params to MIDlet.getAppProperty() . He can read the jad attributes that were there in the jad file before creating the cod file.

  Example:

  existing JAD has "KeyA" whose value is "A." Now package for the project and generate the blah.cod file

  Add a parameter more "KeyNew" with the value "ValueNew.

  Print the source MIDlet.getAppProperty("KeyA") andMIDlet.getAppProperty("KeyNew")

  Step 1. Existing.jad

  KeyA: A.

  Step 2. Build the cod

  Step 3. Add another parameter to Existing.jad

  KeyA: A.

  KeyNew: ValueNew

  Step 4. Existing.jad of charge using javaloader.

  load Javaloader u Existing.jad

  Step 5. Run the application

  Actual output: it prints only a. and not ValueNew

  I read that this is possible in JDE 4.3 + and I'm working on JDE 5.0

  Help, please.

  ~ Joey

  Apparently it only works if we install the Jad with Javaloader file. Having an installation OTA of the Jad file works.

• I can not intall Lightroom 4 (I have the license) - he is blocked after a partial installation - error code 2203 (Win 10).  Can you help me please.

  I can not intall Lightroom 4 (I have the license) - he is blocked after a partial installation - error code 2203 (Win 10).  Can you help me please.

  Hi BobPryce,

  Please see: 2203 error when installing the Adobe Creative Suite 4 products, 5 or 5.5 or updates

  Kind regards

  Mohit

• Is it possible a 0 is displayed after the decimal point when the value is rounded? (I get: 20-20, 1;) "I need 20, 0-20, 1).

  Using the effect of text "cursor", I am able to view replace "30 ° C" "35.5 ° C". My question is: is it possible a 0 is displayed after the decimal point when the value is rounded? (I get: 20-20, 1;) "I need 20, 0-20, 1). I use this code:

  Temp = effect ("Slider Control") ("Slider");

  sliderValue = Math.round(temp*10)/10;

  [sliderValue + ' ° C ' "']

  Here is the solution:

  numDecimals = 1;

  Temp = effect ("Slider Control") ("Slider");

  sliderValue = (Math.round(temp*10)/10).toFixed(numDecimals);

  sliderValue + "° C";

• Please let us put code immediately after the &lt; head &gt;

  I need some space

  <meta http-equiv="X-UA-Compatible" content="IE=edge">
  

  Just after the opening < head > tag.   This tag only works when it is placed immediately after the opening < head > tag.

  I need this because I need to replace how some internal networks against Internet Explorer. Without this tag all my muse sites are detailed on our internal network. I guess that many networks of companies would have the same configuration.  It's really frustrating to have to put it manually on every page whenever I export my Muse site.

  Is there a way to get around this?

  Interesting.

  It is impossible within the Muse to add the code that appears earlier in the HTML content.

  Given that it is an intranet site and apparently all content must be edge mode, you might consider to change the configuration of the server configuration of web servers to specify the modes of document (Internet Explorer)>.

• vCAC 6.0 cannot connect after the creation of the tenant

  After the creation of a new tenant for use with vCAC 6.0, I disconnect from the default connection ([email protected]) and continue to go to the new URL and connection. When I do, my connection attempts fail. I followed the documentation and even used this blog entry as a reference to make sure I wasn't missing a step (vCloud Automation Center - vCAC 6.0 - addition of tenants - DailyHypervisor). After trying to connect with a users AD I created, I get the same error "username/password Incorrect name."

  Attached are the screenshots of the new tenant that I created.

  

  

  

  

  I didn't know all of the other signs on the site of the community with the people having this same problem, so I'm thinking I'm missing something important/simple. Any help you could provide would be greatly appreciated. Thank you.

  --

  Chris.

  You probably need to configure your domain Alias that your ad server is probably change the domain (if AD is configured to use an alias).

• Where is the best place to put the code pl/sql only for after the events of the insert?

  Hi, I can not use database triggers, but I need to run pl/sql code only after an insertion.
  
  I think I need to create a process in the page that inserts into my table, but how do I know if the page is inserting or editing?
  
  Now I have 3 process: (the tablename parameter is in_incidencias)
  
  After the execution of
  
  10 get PK blocked anonymous PL/SQL
  30 process row IN_INCIDENCIAS
  page 40 of reset
  
  What kind of process that I need to create, and how can I know if there is a new record to insert?
  
  Thanks in advance

  Do not be sorry, that this forum is for all kinds of developers :) I am fairly new to APEX.

  When you create a process on your page, you choose ' PL/SQL', click 'Next', and then give you it a name, a sequence number and a point of execution (after Submit, generally). You click 'Next' again and then you can code your process. Encode you, click again on "next". Now you have success and failure messages, you can put whatever you want in here. Click 'Next' again, and you finally processing Conditions. Select the button in the field when you press button and're you good to go. If you never want your process to shoot several buttons, and they all have a request, you can also choose the "Request is contained in the Expression 1" Type of Condition and type a comma list of applications in the field of the Expression 1 (something like "CREATE, SAVE", but without the quotation mark).

  With respect to the code of the process itself, I still have to code an email sending process myself, but this thread contains the basics that you need, with useful links to the official documentation.

  Hope this helps,
  Matt

• Problems with duplicate DATA when the data file was added after the backup completes

  Hello
  
  I am facing a problem when running of duplicate database with the command of database duplicate RMAN on a 10 g database. If I have the duplication from a full backup that is missing a data file that has been added to the database after the full backup of preforms, I get the following error message:
  

  Starting restore at 10-10-2009 18:00:38
  
  released channel: t1
  released channel: t2
  RMAN-00571: ===========================================================
  RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
  RMAN-00571: ===========================================================
  RMAN-03002: failure of Duplicate Db command at 10/10/2009 18:00:39
  RMAN-03015: error occurred in stored script Memory Script
  RMAN-06026: some targets not found - aborting restore
  RMAN-06100: no channel to restore a backup or copy of datafile 43

  Redo log which was Pond at the time of the creation of 43 of the data file is also available in the backups. It seems that RMAN cannot use the log information archived redo to restore the content of the data file 43. I guess that because failure is already reported in the RESTORATION and not in the RECOVERY phase, so again the archived logs are not available yet. I get the same message even if I do another backup of the data file 43 (so a backup that is not in the same backupset as the backup to all the other data files).
  The script, the command duplicate product, I guess that RMAN reads the contents of the source database controlfile and trying to get a backup that contains all the data files to restore the database Assistant - if such a backup is not found, it fails.
  
  
  Of course, if I try to perform a restore/recovery of the source database, it works without problem:
  

  RMAN> restore database;
  
  Starting restore at 13.10.09
  using target database control file instead of recovery catalog
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: sid=156 devtype=DISK
  
  creating datafile fno=43 name=F:\ORA10\ORADATA\SOVDEV\SOMEDATAFILE01.DBF
  channel ORA_DISK_1: starting datafile backupset restore
  channel ORA_DISK_1: specifying datafile(s) to restore from backup set
  restoring datafile 00001 to F:\ORA10\ORADATA\SOVDEV\SYSTEM01.DBF
  .....

  The 43 data file is re-created and then redo is applied to the course.
  
  So, does anyone know if the duplicate database can use archived redo logs to recreate the contents of a data file, as does a normal restore/recovery? If this is the case, then it is necessary to perform a full backup before each duplicated if a data file has been added after such a backup database.
  
  Thanks in advance for any answers.
  
  Kind regards
  Swear

  Hi swear,.

  I got exactly the same problem during replication.
  Because we backup archive logs every 6 hours with rman, I added an additional block of running this script.
  run
  {
  backup incremental level 0
  format "% d_ % s_ %%t p_ bk_ '.
  filesperset 4
  database not saved;
  }

  (I also hit a bug in the catalogue which was resolved by patching up the dbs catalog 11.1.0.6, 11.1.0.7 for.)

  This will restrict the data not making file not part of any backup rman 6 hours while jumping for which there is already a backup of data files.

  Kind regards

  Tycho

• Sierra crash when after the "sleep mode"

  My MacBook Pro (13-inch, mid 2012) after update of the sierra accident when, after the "sleep mode".

  I try to reset the SMC sama NVRAM but always crash.

  suggest to solve?

  Thank you

  When you say 'crash', what do you mean?

  Probably something that runs in the background. Open the black Apple at the top left. Select system, then users and groups and login items Preferences. All deleted in this window.

  You can add applications and programs back to the points of connection with a window to see what is the origin of the crash.

  You can also start the computer start-up (hold down the SHIFT key when you start) which will make the computer start with no 3rd party apps. If that solves the problems, just disable the third-party applications and add back one by one until the problem occurs again.