vCAC 6.0 cannot connect after the creation of the tenant

Similar Questions

• OSX El Capitan 10.11.5 7.29 Skype cannot connect after the sleep or Hibernate

  I normally several days (10-20) without having to restart my computer. I have my setup system for sleep (sleep for hard disk) when I change places of work at home. Before this version of Skype that has worked. Now, Skype does not recover after sleep. I have to restart my system for Skype can properly connect again. Can I please have a post to an earlier version of Skype so I can reinstall this version? This isn't really correct. Having to restart a system developer daily is messing up my workflow.

  Has finally managed to fix it myself. I had a couple of virtual NICs enabled for communication on the replacement test networks. I put the two off and then tried Skype again and this time only it connected without a problem. So, apparently, Skype does not use the main network connection.

• Cannot connect after the installation of recovery

  I got my laptop to the 'out-of-box' State & I cannot now connect you.

  When I try to use the administrator password is locked.

  When I restart the laptop, it sits at the prompt of "program."

  Any ideas how I can get connected?

  See you soon

  Gerry

  > I got my laptop to the 'out-of-box' State & I cannot now connect you.
  > When I try to use the administrator password is locked.

  That s not logical for me. When you install Recovery option you can e asked to create new account and password, if you want so for successful login, you must this username and password if you have set a. That s it.

  I got different books several times and have never had such a problem. You use recovery for the first time?

  Option switch user is available on logon?

• Cannot connect after the restoration planning

  Hi expert,
  
  
  I can not connect to application after that I restored the repository. I need to restore it from prod to my Local.
  the steps are:
  -export repository prod
  -to create the same application and local db
  -import prod repo in local db
  -try to connect
  
  did I forget something?
  
  
  THX.

  Looks like to me you have not migrated the relational database across successfully.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Cannot connect after the change of DNS. Can someone please provide a non-specific to the connection site url?

  I just need a URL to connect to my account and not the site.

  Try this url for the connection

  http://hl0001.BusinessCatalyst.com/Admin

  Let me know if you have any question.

• Help! Safari cannot connect to the server

  I really need help! I tried to forget the network and turning it back on, I have disabled the firewall and remove all extensions of safari. I seems that nothing works.

  I get the message 'Safari cannot connect to the server' on almost every site except this and facebook. I can't enter same Urbanoutfitters.com or ASOS. I just got the message "Safari could not connect to Server" I'm not a computer genius so hopefully someone here can help me...

  You may have installed one or more variants of the malware "VSearch' ad-injection. Please back up all data, and then take the steps below to disable it.

  Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

  Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

  Step 1

  VSearch malware tries to hide by varying names of the files it installs. It regenerates itself also if you try to remove it when it is run. To remove it, you must first start in safe mode temporarily disable the malware.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for other instructions.

  Step 2

  When running in safe mode, load the web page and then triple - click on the line below to select. Copy the text to the Clipboard by pressing Control-C key combination:

  /Library/LaunchDaemons

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named "LaunchDaemons" can open. If this is the case, press the combination of keys command-2 to select the display of the list, if it is not already selected.

  There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. Please don't skip this step. Files that belong to an instance of VSearch will have the same date of change for a few minutes, then they will be grouped together when you sort the folder this way, which makes them easy to identify.

  Step 3

  In the LaunchDaemons folder, there may be one or more files with the name of this form:

  com Apple.something.plist

  When something is a random string, without the letters, different in each case.

  Note that the name consists of four words separated by dots. Typical examples are:

  com Apple.builins.plist

  com Apple.cereng.plist

  com Apple.nysgar.plist

  There may be one or more items with a name of the form:

  com.something.plist

  Yet once something is a random string, without meaning - not necessarily the same as that which appears in one of the other file names.

  These names consist of three words separated by dots. Typical examples are:

  com.semifasciaUpd.plist

  com.ubuiling.plist

  Sometimes there are items (usually not more than one) with the name of this form:

  com.something .net - preferences.plist

  This name consists of four words (the third hyphen) separated by periods. Typical example:

  com.jangly .net - preferences.plist

  Drag all items in the basket. You may be prompted for administrator login password.

  Restart the computer and empty the trash.

  Examples of legitimate files located in the same folder:

  com.apple.FinalCutServer.fcsvr_ldsd.plist

  com Apple.Installer.osmessagetracing.plist

  com Apple.Qmaster.qmasterd.plist

  com Apple.aelwriter.plist

  com Apple.SERVERD.plist

  com Tether.plist

  The first three are clearly not VSearch files because the names do not match the above models. The last three are not easy to distinguish by the name alone, but the modification date will be earlier than the date at which VSearch has been installed, perhaps several years. None of these files will be present in most installations of Mac OS X.

  Do not delete the folder 'LaunchDaemons' or anything else inside, unless you know you have another type of unwanted software and more VSearch. The file is a normal part of Mac OS X. The "demon" refers to a program that starts automatically. This is not inherently bad, but the mechanism is sometimes exploited by hackers for malicious software.

  If you are not sure whether a file is part of the malware, order the contents of the folder by date modified I wrote in step 2, no name. Malicious files will be grouped together. There could be more than one such group, if you attacked more than once. A file dated far in the past is not part of the malware. A folder in date dated Middle an obviously malicious cluster is almost certainly too malicious.

  If the files come back after you remove the, they are replaced by others with similar names, then either you didn't start in safe mode or you do not have all the. Return to step 1 and try again.

  Step 4

  Reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select

  ▹ Safari preferences... ▹ General

  and click on

  Set on the current Page

  If you use Firefox or Chrome web browser, remove the extensions or add-ons that you don't know that you need. When in doubt, remove all of them.

  The malware is now permanently inactivated, as long as you reinstall it never. A few small files will be left behind, but they have no effect, and trying to find all them is more trouble that it's worth.

  Step 5

  The malware lets the web proxy discovery in the network settings. If you know that the setting was already enabled for a reason, skip this step. Otherwise, you should undo the change.

  Open the network pane in system preferences. If there is a padlock icon in the lower left corner of the window, click it and authenticate to unlock the settings. Click the Advanced button, and then select Proxies in the sheet that drops down. Uncheck that Auto Discovery Proxy if it is checked. Click OK, and then apply.

  Step 6

  This step is optional. Open the users and groups in the system preferences and click on the lock icon to unlock the settings. In the list of users, there may be some with random names that have been added by the malware. You can remove these users. If you are not sure whether a user is legitimate, do not delete it.

• HP Envy 4500: Printer says it has solid network connection, but cannot connect to the internet

  So I have not been able to use my printer wireless lately, so I decided to check if it was connected to my wireless network. It is; I checked, re-connected and checked several times. So I decided to reactivate my web services. I have them turned off, and now whenever I press the button on the printer ePrint, it says connection for a really long time and then displays the message in the sense of "the printer cannot connect to the server. Check the internet connection and proxy settings.

  I have re-connected the printer to my wireless network, I checked that if I use a proxy server (I'm not), I used the HP print and Scan Doctor - just, it won't just matter what I do.

  All I can think about is the fact that I have recently purchsed a new router, but says that its connected which is what really stem me.

  This printer makes me crazy - please help

  Hi @mastersword64,

  Welcome to the HP community!

  I hope you have a pleasant experience with us.

  I want to help you with the connection error, you get on your e-all-in-one of HP ENVY 4500 printer when you try to enable web services.

  Here are some steps, I suggest trying to get your web services up and running it again:

  Network Power Reset:

  We'll leave the router and unplug the power cable (NOTE: do not reset the router.), and then do the same with the printer and shut down the computer. After a minute, plug in the router, wait to fully turn on, then plug the printer back in and wait for the wireless light become solid. Once the router and the printer are on, go ahead and re - turn on the computer. This will refresh the network connection.

  Restore the default settings of the network and reconnect:

  1. on the front panel of the printer, press your up wireless icon

  2. Select settings.

  3. Select restore default network settings.

  4 turn on your printer.

  5. once it is initialized to save, press the wireless icon again.

  6. Select settings.

  7. Select Wireless Assistant , and then follow the prompts to enter the details of your wireless network.

  8. try to activate the web services again.

  Configure a manual DNS for your printer:

  1 obtain the IP address of your printer

  a. This can be done by pressing the icon on the printer wireless.

  2. Enter the printer's IP address in a browser on your computer.

  3. Select the tab network at the top of the page.

  4. on the left, select network.

  5. Select network address (IP)

  6. Select manual DNS server

  a. manual Preferred DNS should read 8.8.8.8

  b. alternate DNS server should read. 8.8.4.4

  7. Select apply. You can get a warning simply select OK.

  Please reply to let me know if these steps resolve your issue.

  Good luck!

  

• "Cannot connect to the network." When you enter the correct password for wireless network

  Hello

  I have the HP Photosmart C7200 all-in-One series.

  This seems relatively insignificant compared to some of the problems posted here, but nevertheless it is a problem.  I have a Verizon FiOS (Actiontec) router.  I am trying to connect to it wireless; the network key is using WPA authentication.  I followed all the instructions in the quick start guide.

  My printer detects my network and application authentication key.  I enter the correct key, the printer is trying to establish a connection, but after about 15 to 25 seconds, I get the error message, "cannot connect to the network.  I know that my key is correct; I connect to my router very well through several laptops, PDA, etc.  I have reset the settings network default manufacturer and tried without success.

  I don't know what kind of trouble shooting I'm supposed to do here.  The printer detects the router (albeit low signal strength) whenever I try to connect, I enter the password each time and I get the error each time.

  Your help is greatly appreciated.

  Edit: I printed the test report wireless network, here are the results:

  Radio on   PASS

  The radio work   PASS

  Ethernet cable not plugged in   PASS

  Network name (SSID found)   PASS

  Security   PASS

  The printer settings compatible with the configuration of the wireless router   PASS

  No filtering   IN CASE OF FAILURE

  Connected   Not work

  The signal strength   Very low

  Other networks detected matching you the network name (SSID)   NO.

  I know this sounds strange, but try changing channel by channel 11 of the wireless router.

• Programs cannot connect to the internet, while IE8 and firefox work very well on the internet.

  I used google chrome as my default browser, but one day it stopped working, while firefox and IE always worked / work fine now.  When google chrome no longer works, all my programs stopped to connect to internet, like Skype, itunes, WMP, etc.  The itunes gives error me is "make sure that your network connection is active and try again.  When I download programs through to firefox or IE8, now my default, they download but used to install or connect to the internet (I tried to reinstall chrome after that deletion but it will not be completed).  I was certain this isn't the router or the Internet itself, my wireless works very well to navigate through the Internet and other computers on the network do not have this problem. problem when I connect to other wifi networks.  The help and support center will not be to the point after that I click on it.  I use windows xp sp3 home edition 2002.  I looked through the other threads to see if I can solve the problem, check the exceptions in the firewall, disabling firewalls and other security, running an antispyware/malware, someone suggested (super antispyware), lowered or disabled security settings, but all without success.  I don't know what to do at this point but to restart the system.  Please help, any suggestions?  Thanks in advance.

  Hi unlucky2013,

  Follow the steps from the link below: Windows XP Internet programs cannot connect to the Internet through the connection broadband:http://support.microsoft.com/kb/307164

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows cannot connect to the Internet using HTTP, HTTPS or FTP. __This is probably caused by settings of firewall on this computer. __

  I recently installed the version of Norton, after that I was unable to use the internet, I thought it was the Norton firewall settings. After having playing with her for 30 minutes, I gave up and uninstalled Norton. I have disabled the firewall, I have reset the default settings. Here is the message I get when I run a diagnostic. A crazy thing is that I can connect to internet when I connected to this same computer as a guess.

  Please help me!

  Windows cannot connect to the Internet using HTTP, HTTPS or FTP.
  This is probably caused by the settings of firewall on this computer.

  Check the settings of firewall for the HTTP port (80), HTTPS port (443) and FTP port (21).

  Hi rhonda9937,

  1. what browser you are using to connect to the internet?

  It is not recommended to keep Windows Firewall disabled on the computer.

  This would happen if the ports are not open in the Windows Firewall.

  I suggest that you open ports in Windows Firewall and check if it works.

  How to manually open ports in Internet Connection Firewall in Windows XP

  http://support.Microsoft.com/kb/308127

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users

  http://support.Microsoft.com/kb/875357

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows cannot connect to the printer. Access is denied.

  From: Steve

  Desperately, I try to print from my laptop Windows Vista Home Premium to a shared printer on my home wireless network.  The shared printer is connected to a XP Home machine.  This machine is wired (via a LAN cable) to the wireless router.  I can 'see' the printer that I want to use but trying to to connect to it. I get the error message "Windows cannot connect to the printer.  Access is denied. "I would be grateful for any help.

  Kind regards.

  -Steve

  From: Alan Morris [MSFT]

  Since the XP machine is HOME, I don't think that the permissions dialog box is accessible.

  Run the XP network sharing wizard again and see if it affects safety correctly on sharing.

  Is the printer you share one that has drivers provided with Windows XP?

  In the meantime we will at least get the printer works for you.

  Create a local printer on Windows Vista; Creation of a Local Port in the form \\XPMACHINE\Printsharename (this will send the files by using the redirector instead of the RPC service).  Install the Windows Vista driver for the device.

  You can print because print$ access is required for printer drivers.

  -Alan Morris

  Windows printing team

  Another response of the community of Windows Vista discussion groups

• Vista problem: "failed to connect to the windows service, Windows cannot connect to the system event.

  I have reported this problem on my PC at home that connects to the internet. My laptop runs Vista Home Premium and I can't connect to the internet. I took my laptop on a trip, tried to connect to the wireless network that was free to the place we are. Could not connect, and after this initial test, the following is displayed after the start of "failed to connect to the Windows Service, Windows cannot connect to the system event notification service. This problem prevents limited users to logon to the system. As administratvie user, you can view the system event log to see why the service did not respond. "(have no idea how or what it means) when I go to the task bar you want to connect to a network, it is said:" the dependency service or group could not start"and if I go ahead and press"connect to a network"it says it can't find.  I search for computers on the network (who I'm sitting next to) and then try to diagnose the problem and it cannot. I have limited knowledge of this type of problem. Anyone have this problem and how to fix it?

  Hi ptkein,

  Thanks for posting your question on the Forums of Windows Vista.

  Option 1: You can download and install the latest network card drivers and see if that can solve the problem.

  Option 2: Follow the link below to fix network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Option 3: Follow the link below to solve Internet connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Option 4: To verify if a third party application is a cause, follow this link (http://windows.microsoft.com/en-us/windows-vista/Advanced-startup-options-including-safe-mode) for this boot to the desktop using the safe mode with networking option and try to install the network. If the problem is resolved, you will need to perform a clean boot by following the steps in the following article to refine the exact source and isolate it: http://support.microsoft.com/kb/929135

  Let me know if it worked.

  Hope it will be useful.

  Thank you and best regards,

  Kadoch - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Help! Setup Wizard cannot connect to the router!

  I tried several times to install this router wireless MO # BEFW11S4.

  I get an error message that Setup Wizard cannot connect to the router!

  I pressed the reset on the back button each time, it is turned off, check the cable connections between the modem cable to the router, then router to the computer.

  After dropping out of the router and connect the PC to the top with the modem, the PC is then connected to the internet once more.

  How to solve problems, or isolate the problem as a bad router?

  Please send me a PM for any suggestions or help.

  Thxx

  (Note to mod: Email address removed.)

  Thank you very much this has helped. You don't mention there was a button "generate" to create the password agorythm code to use as a password.

  Thank you! Problem has been resolved.

• Extension mobility / CAD issue: "You cannot connect because the phone is compatible IPV6"... help please.

  Hi all

  I'm having a problem with the mobility of the extension and CAD.

  UCCX 8.0.2.10000 - 41

  8.0.2.40000 - 1 CUCM

  CAD 8.0 (2)

  Phone: 7945G (configured according to other phones no 'contact center' of society, but not 'line' unaffected - want them purely for Contact Center users to connect to their posts)

  When the user logs in the phone itself, there is no question at this point.

  When the user goes to sign in CAD, they are presented with the following error:

  "You cannot connect because the phone is IPV6. IPv6 compatible phones are not compatible with CAD. »

  Workaround is to unlock (settings > * #) Network Configuration on the config of IPV6 phone and physical removal.

  Settings > * # > 2 (Network Configuration) > 2 (Configuration IPv6) > button 'more' > 'Clear' button > it presents 'clear IPv6 network settings '.

  The user can then successfully connect to the CSA.

  The problem is that, after his shift, the user logs on to the phone, then when they log in again, the question is again presented and the 'workaround' to manually remove the IPv6 configuration out of the phone must be done all over again (and each time after that too). Arrrrg.

  I also noticed that in CUCM > devices > Device Settings > Commond Device Configuration > find > my CDC > the IP address Mode IS set to "IPV4 and IPV6.

  A test, I've changed that to "IPV4" only

  User logged off phone, phone rebooted, logged in user, has attempted to connect to CAD, same problem. No change! Ahh some more!

  Finally, I discovered an alternative (to avoid the issue and the previous workaround)... CUCM, I put devices > phone > find > select > sub-heading ("phone Configuration') 'Extension Information' >"Logout profile"profile of mobility of users and then we do NOT have the issue. Phone restarted, connected, do not connect you, tried all the different States - everything works fine now.

  I also found that by setting up a 'line' on the device - the problem is also solved.

  HOWEVER, I don't really want to specify a line configured to the individual if possible phones or mobility of the specific user profile.

  Is it possible to avoid this? What Miss me to avoid specifying a line or a profile on your phone?

  See you soon,.

  Brett

  Post edited by: Brett Hanson (in the message original, I've specified only the version 8.0.2 as version - to make this discussion more relevant, I just put in the details of the full versions we ran when the issue was present.) CAD, except that I don't remember what version it was then).

  Hi Brett,

  I saw something similar once I installed UCCX 8.x to a customer.

  Workaround there had to be a SU installed on the UCCX.

  If it helps,

  Kind regards

  Juan

• Why other computers cannot connect to the internet with my ad - hoc connection?

  Hi all! Here's my situation.
  My friends router is dead and we are in the smack dab Middle no where with no transport and we want the internet.
  We have only an Ethernet however.

  Here's my situation.
  I want to create an ad - hoc network and share the internet connection using ICS. The problem is, when I secure my ad hoc network with WEP or WPA cannot connect to the network. The network is visible on the computers of my friends (mac and PC) and they put the password nothing is done.

  But here's the kicker, when I don't put no security on the network, everything works fine.

  How do I create an ad hoc ICS with security network and have not really work?
  Thank you guys!

  Hello

  Thanks for posting. If I understand correctly, you experience the problem with the connection of computers using the Ad - hoc network. Correct me if I'm wrong!

  Before I continue, I would like to collect some personal information on the issue.

  1. what security software is installed on your computer?

  2. share your protected password put on or off?

  The sharing tab is not available if you have only a WLAN card.

  Method 1:

  Follow the link below and set the ad hoc network.

  Set up a computer-to-computer (ad hoc) network

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

  Set up a wireless network without router

  http://www.Microsoft.com/windowsxp/using/networking/setup/adhoc.mspx

  Method 2:

  After you follow the steps above to set up ICS on the host computer, make the following changes on other computers (but not on the host computer).

  (a) open Internet Options by clicking the Start button, clicking Control Panel, clicking network and Internet, and then clicking on Internet Options.

  (b) click on the connections tab, and then click never establish a connection.

  (c) click on LAN settings.

  (d) in the dialog box settings of the network Local (LAN), under automatic configuration, clear the check boxes automatically detect connection settings and use automatic configuration script .

  (e) under Proxy Server, clear the use a proxy server for your LAN check box, and then click on OK.

  If the password protection sharing is disabled, I suggest to turn on you or so try if this can help fix the problem.

  Method 3:

  Follow these steps and check if that helps.

  (a) click Start, type Control Panel in the search box, press ENTER.

  (b) click on network and sharing Center, click change advanced sharing settings in the left pane.

  (c) click on him to expand the network profile (type) that you want to turn sharing on or off for protected by Word.

  (d) select (dot), turn on password protected sharing.

  Visit these links for more idea on the Internet connection sharing between computers connected on an Ad - hoc network:

  Set up a shared Internet connection using ICS (Internet Connection Sharing)

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-shared-Internet-connection-using-ICS-Internet-connection-sharing

  Change the settings for ICS (Internet Connection Sharing) Internet

  http://Windows.Microsoft.com/en-us/Windows7/change-Internet-settings-for-ICS-Internet-connection-sharing

  More information on:

  Using ICS (Internet Connection Sharing)

  http://Windows.Microsoft.com/en-us/Windows7/using-ICS-Internet-connection-sharing

  Reply back with the results. I'd be happy to help you further.