After the failure of Windows Vista Service Pack 2 installation I get error: E_UNEXPECTED (0x8000ffff)

Similar Questions

• After the release of windows vista service Pack 2 and flash 10 my system continues to blue screen

  After the last update of windows vista service Pack 2 and flash 10 that my system continues to blue screen, the solution has advised windows that will fix it is to uninstall flash and reinstal, it dosent solution work any ideas? I tried to roll back to Flash 9 and it's less, but happens again... someone has any ideas?

  First, uninstall Flash to make sure that's not the problem.  If the problem persists and if the problem is related to the installation of Vista SP2 (as seems to be the case), then Support Microsoft offers free technical support for installation of Vista SP2 issues at: https://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034&st=1&wfxredirect=1&sd=gn.  They are experts on these issues and you should take advantage of the offer, although it is still free.  I'm sure they will be able to help you.  Minimize (but do not deny) the update of Flash and to focus on the installation of SP2 when you explain the problem.

  I hope this helps.  If this isn't the case, after return and we'll see what we can do.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows Vista Service Pack 2 (KB948465) I get the error code 80092004 and it was not able to load.

  Windows Vista Service Pack 2 (KB948465) I get the error code 80092004 and it was not able to load.

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Impossible to solve the problem of Windows Vista Service Pack 2 update! (error code 80073712)

  original title: could not resolve the problem of Windows Vista Service Pack 2 update!

  Hey there,

  I got Windows Vista Home Premium Service Pack 1 in my laptop when I bought it. Recently there was no updates of security (e.g., KB2481109) to install it into my system with a error: 80073712 and I had received a notification from windows to install Windows Vista Service Pack 2update. I tried to install it from windows update, but I got the error: 8024200d. I read the solution on this site and followed by download the stand-alone file and install "System Update Readiness Tool" (KB947821). ". After that I downloaded the standalone version "Windows Vista Service Pack 2" (KB948465) and tried to install it, but I got the error: 800f081f. "» I did Scan SFC which there is "no question of integrity" in the system, uninstalled "Avira Antivirus software" and again tried to install Service Pack 2 , but again, I've got the error: 80073712 After all this I couldn't solve the problem. Please provide some tips if anyone has solved the same or has a solution!

  Thank you very much

  UD

  Hi Electrocuteud,

  You have access to a Windows Vista installation disc? If so, follow the steps in this document to perform an InPlace upgrade. This will reinstall Vista without making any changes to the files and programs on the computer. Even if your data and programs must be safe, it is always advisable to make sure that you have a recent backup before major changes on the computer.

• Update for Windows Vista Service Pack 2 (KB948465) repeatedly fails - error Code 80246007

  Update for Windows Vista Service Pack 2 (KB948465) repeatedly - fails error Code 80246007.  BITS ok - Microsoft 'Fix' detected 'problems' and 'fixed '.

  them, but the update continues to fail.  Any help would be appreciated.

  Hello

  Perform the steps from the link below and see if it helps.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  Hope this information helps.

• Why is the Windows Vista Service Pack 2 Installation Progress Bar stuck?

  I downloaded the Service Pack 2 of Windows Vista, so I could install an application on my computer. Is not compatible Windows Vista Service Pack 1. I've been sitting in front of my computer for a while and the green bar progress is stuck at it seems to be 100% or 99%. I was going to complete the process, but I don't want to damage my PC.

  Too bad guys! I had Windows Update running in the background and my computer is automatically restarted on 5 Minutes after!

  Tips:

  Make sure to close all programs and applications that might interfere with the Installation of the Service Pack.

• I can't install the update for Windows Vista Service Pack 1 (KB936330). I get error code 800F081F & dt000.

  I tried to solve this problem, almost every day since the 01/08/2012 a period of 3 to 7 hrs @ a time, following troubleshooting instructions everything including the fix It Center without success. I even tried to do it manually.  I need a disk to achieve? Please give me detailed instructions thoroughly. Is this a common problem with Windows Vista.

  What are error codes: 800F081F & dt000

  Hello

  1. have you made changes on the computer recently?

  2 is the issue specific to this update?

  3. are you able to install other updates successfully?

  4. What is the brand and model of the computer?

  5 all the troubleshooting steps you have done?

  Try these steps and let me know the status.

  Method 1.

  I suggest you follow the steps in this article.

  Problems with the installation of the updates: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-problems-with-installing-updates

  Method 2.

  Clean boot : Try to set up your computer in a clean boot state and check if you are able to install the update. Tuning your system to start in mode minimum state helps to identify third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Disable Firewall: turn enable or disable Windows Firewall: http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Note:

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you need to disable temporarily to install other software, you must activate it as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3.

  Learn how to install Windows Vista Service Pack 1 (SP1): http://windows.microsoft.com/en-us/windows-vista/Learn-how-to-install-Windows-Vista-Service-Pack-1-SP1

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate. The virus scanner is provided so that the computer is virus-free before you start to install the updates.

  Method 4.

  The system update tool scans inconsistencies in the computer where it is installed. It usually takes less than 15 minutes to run the scan. However, the tool might take much longer on some computers. Although the progress bar seems to stop, the analysis is still running and you should not cancel the update.

  The system tool that corrects problems with Windows Update is available for Windows 7, Windows Vista: http://support.microsoft.com/kb/947821

  For reference:

  Windows Update 800F081F: http://social.technet.microsoft.com/Forums/en-US/itprovistasetup/thread/2cf14002-250f-4cd3-baab-185b13d1e501/

  I hope this helps.

• I cancelled the update of Windows Vista Service Pack 2 (KB948465) and now I can't get it to download?

  I have started to download Windows Vista Service Pack 2 (KB948465) but cancelled it.. and now I want to download and update, but it does not display on my update list... any help?

  You can download the Vista SP2 standalone installer:

  • Download the SP2 32-bit from the Download Center

  • Download the SP2 64-bit from the Download Center

  To see if you have Windows 32 or 64-bit:

  1 open the system by clicking the Start button, right-click computer, and then clicking Properties.

  2. in respect of the system, you can view the type of system, it will say 32 or 64 bits.

• Try to install Windows Vista Service pack, but I cannot get past that the terms of the license pop-up ads.

  Install service pack for my Vista program,

  ... can not get past the license terms box pop... Help!

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://support.Microsoft.com/kb/947366

  Also check out this link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

  It will be useful.

• Don't have Windows Vista Service Pack 2 installation

  My computer has downloaded Windows Vista Service Pack 2, but he never finished the installation. It will start the installation, but after waiting for two or three hours, it still shows zero installed. Someone at - there experience this problem, and if so what needs to be done about it?

  Adequate preparation may make all the difference when you install a service pack.

  How do I install the Vista SP2

• Failed to read the videos after the upgrade to Windows XP Service Pack 2 with Service Pack 3.

  Original title: I recently updated my windows xp service pack 2 with service pack 3. sound suddenly day now, I can not play videos on my pc. Please help me on this issue.

  Windows xp 2002
  service pack 3
  Intel celeron cpu 2.13 ghz
  504 MB of ram

  Hi Karthik,

  You receive messages or error codes?

  Given that you have upgraded to Windows XP service pack 2 (SP2) to SP3, you can try to upgrade the video card on your system and check.

  We can refer to the computer or the device manufacturer's Web site and try to update the drivers.

  How to manage devices in Windows XP

• I have a problem with the download of Windows Vista Service Pack 2.

  Original title: Vista SP2 help for download

  I just download Vista SP2 on my Compaq Presario PC and it seemed to install correctly.  However, after it restarted my computer, nothing happened.  The computer was on, but he was not making a noise and the screen was black (and eventually appeared in mode 'sleep').  After about 3 hours of this, I restarted my computer manually. When I turned it on the Tower made a lot of noise (sounded like a blowing fan), but the screen remained black and didn't try again to exit mode 'sleep' (even when I moved my mouse and restarted my monitor).  I am unable to do anything on my desk now, then, what can I do to fix this?

  Thanks for the help.

  Hello

  See if that helps you.

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Installation of the Service Pack information for when you arrive, it fixed:

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  See you soon.

• Way around being hung to one outlet during the update of Windows Vista Service Pack 2?

  I have a problem, I have a laptop Toshiba where AC internal adapter is broken, it has been for some time - but my buddy has also a Toshiba laptop computer, where I can just return for batteries between the two and this system has worked fine just now, the problem - I could do my Windows updates business as usual until Service Pack 2 for Vista, it will not allow the installation of the update because my laptop is on battery.  Is there a way to get around this?  I have of course no way to connect to food unless it is repaired, and at this point I just prefer to get a new laptop that money put into this one - I'm hoping somewhere someone has suggestions! :(  Help!  Thank you!

  Hello Victoria MariaElena.

  Unfortunately, there is not another way. Your laptop must be powered by the sector during the update to avoid the laptop shut down due to lack of battery power.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer:www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• try to install the update for windows Vista service pack 2.

  install the drop-outs, citing error code 80070490. What should I do now?

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997

  System update scan tool corrects errors of Windows Update in Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008
  http://support.Microsoft.com/kb/947821

  0 x 80070490

  ERROR_NOT_FOUND

  Windows could not search for new updates.

  However, a repair (AKA In-Place Upgrade) installation will be not solve the problem if it is due to a hijackware infection.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044

• Windows Vista Service Pack 2 installation problem

  I am having major problems installing service pack 2 on windows Vista on a Dell Inspiron from 32-bit. It returns the 8007000D error code.

  I tried the PC back to factory settings, removing the anti-virus and the deactivation of some things non-nessasary start up with msconfig. Also, I have disabled all the wireless devices using a switch on the side of the laptop - it seems that would enable me to install service pack 1.

  Even with all the foregoing it always fails and recommends the system "Update system tool" update running. I have run, restart the computer and run the SP2 and it does not always work with the same error message.

  The only other methods recommended to install must remove antiviris and other programs that I've done so I don't know what to do!

  Help, please!

  Thank you

  Matthew

  Robear,

  Thanks for your reply.

  I looked at the link (http://support.microsoft.com/kb/947366) and went through all the troubleshooting guide without success. With my current attempts to install SP2 (after the return to factory settings), I remove McAfee from the computer (that came with it as default) and then install the service pack SP1 and SP2 by using the stand-alone installation programs by downloading from another computer.

  Thank you for give me the Microsoft technical support link, that I had read on another thread that the free support is exhausted.

  I will try to sue microsoft and come back here if I have any luck!

  Thank you

  Matthew