HP Envy M4: Just changed the HARD drive (failed) and replaced with SDDS, having problems loading OS System.

SO as I said, my HARD drive wasn't so I went and replaced by a DDI, I did not have any recovery disk or anything, because I didn't need anything off the old HARD drive (I had an external which had all my videos and photos) now my only question is how can I load my old windows 8 OS and then upgrade to windows 10.

any advice or assistance would be greatly appreciated.

Thank you

Alex

Hello

Please follow the instructions below:

http://support.HP.com/us-en/document/bph07143

Kind regards.

Tags: Notebooks

Similar Questions

  • Question about reinstalling windows on a laptop that came with it, but the hard drive failed and had to be replaced.

    OK, until recently, the hard drive of my laptop couldn't, and I had to replace, no biggie, I really care about this laptop in any case. Then I threw ubuntu top and let it go from there. But recently, I wonder, if I could get windows again for her, for free. I am sure that it is not under warranty, but I could go and check of 90 percent. I have no back ups for it because it was cheap.

    Additional information:

    HP Pavilion G6-2235us

    Bought in the United States

    Provided with Windows 8

    No backups.

    Yes, if the hard drive has been installed you can just catch a Windows ISO-8 8.1 is not available now and make an own Install.Then, if you have the sticker of the product key on the back of your laptop use the product key to activate. Devices with Windows 8 generally have incorporated in their BIOS product key and use the following tool to get the product key:

    Download the key tool produces OEM of Windows

    Then, you can use the key to activate. In the meantime, here is the link to download windows ISO 8.1 and generate the installation media

    http://www.eightforums.com/tutorials/18309-Windows-8-Windows-8-1-ISO-download-create.html

    Later you can improve Windows 10 too if you wish.

    Let us know if you have any other questions.

  • change the hard drive, protectSamrt

    can I change the hard drive in a laptop with protectSmart? If I can, the new hard drive get the protectSmart?

    Hello

    Yes you can.  ProtectSmart is a hardware component of the laptop, all you need to do is to install new protectSmart software which you will find on the download page for your laptop computers.

    Kind regards

    DP - K

  • HELP: How to change the hard drive on the envy 15

    Hello

    I have a problem with my PC. I need to change the hard drive but I can't open the top box to access the old hard drive.

    someone has experienced the same problem?

    OME information on my computer:

    HP ProtectSmart

    model: 15-u060nz

    OS: Windows 8.

    in advance, thank you

    Pascal

    Hello everyone,

    great, I found, I have reality my colleague one saw 2 hidden screws.

    After that no problem to replace the hard drive.

    Thank you very much

    Take care

    Pascal

  • Satellite P10 - how to change the HARD drive?

    Hello

    I want to change my Satellite P10 for a bigger HARD drive.
    But I Don t know how to remove the DvD drive.

    On this laptop, I mean that the HARD drive is under the DvD drive.

    Please help me, if you know how to change the HARD drive.

    Welcome them

    Mister_X

    Hi Frank,.

    I'm not too sure about the P10, but on my A30 the hadr drive is under the DVD-ROM. It is secured in place by a single screw (accessible from under the laptop), and when it is deleted the DVD-ROM slides just to place revealing the hard drive.

    The hard drive is fixed with 4 screws (2 on each side)

    HTH

  • HP pavilion dv6-7029wm recovery kit lose after changing the hard drive

    Hello

    Recently, I changed the hard drive after the old one crashed, so I need the recovery kit, but the site it says shipps only in canada or the United States

    as I left the States, how can I get them?

    where can I download the recovery image and burn it to a DVD?

    Hello

    Another option that you might consider is to create your own Windows 7 installation disc.

    Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

    An example of a COA label can be seen here.

    You can create a Windows 7 installation disc yourself using another PC - just download the Disk Image correct ( this must be the same version that originally came with your laptop - it is listed as Windows 7 Home Premium 64 - bit ) from the link below and use an app like ImgBurn ( Note: you can deselect additional software during installation of ImgBurn offerings) to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  The source of the Windows Image is Digital River.

    Windows 7 Home Premium 64 bit SP1.

    Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

    http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

    You may need, additional drivers and software are here.

    Kind regards

    DP - K

  • I changed the hard drive, how do I put on an operating system on the new hard drive

    I changed the hard drive, how do I put on an operating system on the new hard drive

    Restart with the keys Option and command R keys. If this keyboard shortcut does nothing on your Mac, use a compatible Mac OS X installation DVD.

    Follow the prompts on the screen.

    (142198)

  • Satellite Pro L500-1W4 - cannot install Win 7 Pro after changing the HARD drive

    Hi all

    I need assistance with Windows.

    I have a Toshiba Satellite Pro with Windows 7 preinstalled pro and the recovery DVD to downgrade to Windows XP Pro.
    I had to change the hard drive, so I try to reinstall Windows 7 from the recovery CD, but it does not work. He said that it is not possible to install this on this machine.

    So I tried with Windows XP CD recovery and no problem
    I'd rather have windows Windows 7 but I do not know how to retrieve
    Last information, the Windows XP CD recovery came with the laptop that Windows 7 was made by the store who sold me the computer.

    Thank you for your help
    Julie

    As far as I know there is not a kind of limitation and if there is no problem with the original recovery for Win7 disc, you should be able to install it on any HARD disk that you use with your machine.
    I upgraded HDD to the SSD on my installation of picture machine and the restore worked without any problems.

    To be honest, it is not easy to say what the problem is here, but the Win7 installation disc is somehow suspect for me. I don't know what model of laptop you have exactly, but somehow, I feel you didn t get original drive Win7. Best evidence is the Windows XP Home edition recovery disk. The prinziple with Win7 is the same and it should works.

    When you use this disk you should have the menu as shown on http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm

    This document explains how this works with the original installation disc of recovery.

  • Change the HARD drive in the laptop Satellite P10-304

    I bought a new hard drive for my laptop toshiba satellite sp10, can someone tell me were the hard drive is in the laptop, so I can change it as it does not tell you in the instructions booklet
    Thank you
    jm75uk

    Hello

    For some portable models change HARD drive is very simple and not complicated. Change the HARD drive in your case will be not so easy, and in my opinion, you should contact the service partner. I don't know how old is your laptop, and if the warranty is still valid, but as Tobi said if you open the Briefcase with laptop computer on your own, you can lose the warranty.

    I don't know, but the HARD drive should be placed somewhere under keyboard because on this model there is no coverage of HARD drive in the lower corner.

    Good bye

  • I changed the hard drive of a 4440 probook s and I can not configure the fingerprint reader

    Hi, I have a probook 4440 s, I changed the hard drive due to malfunction, I used paintings General; I can't set the finger print recognition

    Hi Rubio7,

    Welcome to the HP forum!

    Your Probook is a commercial unit and the consumer forum.

    I'm sorry, but to get your question more exposure, I suggest posting in the trade forums, since it is a commercial product. You can do the Forum Commercial/Notebook - HP ProBook, EliteBook, Compaq, slate/Tablet PC, Armada, LTE

    I hope this helps.

  • I changed the hard drive and was invited to provide an activation code in order to achieve the functioning of the operating system

    I had problems with my PC which is an old, 2003 E - business machines, I changed the hard drive and was invited to provide an activation code in order to achieve the functioning of the operating system, it is the third time that I had to do it in 2 years, a message came back to me that I could use this activation key which is Microsoft XP Home Edition... any suggestions I'm a student who can't afford to keep buying these keys to get my PC running, I have homework to fill out online... Please help

    Use telephone activation, say nothing, and you will possibly connected to a human being.  They should be able to sort out you.

  • Changed the hard drive and stays of Windows vista is not genuine

    Original title: why do need me a new product key
    My computer stopped working and a new hard drive has been implemented. Now my computer asks for a product key and my computer says that I am using a windows vista that is not authentic. My background goes black and won't keep any substance I put in place.

    Thanks for posting in the Microsoft community!
    You have reached the right forum for your question.

    This problem occurs because you changed the hard drive. When a change is made in the hard disk of the windows vista system will ask you to activate.

    To activate Windows Vista by using the automated telephone system, follow these steps:

    a. Click Start, and then click computer.
    b. click System Properties on the toolbar and then click here to activate Windows now in the Windows activation section.
    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
    c. click Show me other ways to activate.
    d. click on use the automated telephone and then follow the instructions.

    You can also navigate to the link below and try to follow the steps to reactivate the copy of Vista.
    http://support.Microsoft.com/kb/950756

    Reference link:
    What is activation?
    http://Windows.Microsoft.com/en-in/Windows-Vista/what-is-activation

    Activate Windows on this computer
    http://Windows.Microsoft.com/en-in/Windows-Vista/activate-Windows-on-this-computer

    Please respond with the information. I'd be happy to help you further.

  • change the hard drive in the Pavilion all-in - one ms228

    My hard drive has stopped working on my Pavillion ME 228 all in an office.   I found a replacement at a reasonable price.  I bought this computer in France a couple of years ago, it came with windows 7 family in french with a keyboard french azwerty.  Now, I have to change the hard drive is possible to put on Windows 7 'Ultimate' in English (I have the disc) and English qwerty keyboard would work on this subject?

    Any advice would be really appreciated.

    Yes, you can install Windows 7 Ultimate English and plug an English keyboard. It uses only a keyboard USB, right? Computers have no nationality... they will take the language of the hardware and software you install on them.

    If the computer did not come with Ultimate you will need a new key Code. You can install the English version of the Windows 7 level it came with (probably Home Premium) using your own key Code.

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • I just replaced the hard drive in my PC with my arrival of the damaged disc. I'm wondering now "activate Windows now".

    I just replaced the hard drive in my PC with my arrival of the damaged disc. I'm wondering now "activate Windows now". The code on the computer case was partly carried away and I do not have a record of it. The software has been activated once already. Suggestions, please.

    original title: hard drive swap.

    Use a magnifying glass and a strong light and see if you can retrieve the key.  It is not registered anywhere except on the label.  They are applied at the factory in batches, and there is no record that the key is affixed to a specific computer.  Recover what you can and then try to activate by phone.

    To activate Windows Vista by phone, follow these steps: click Start, and then click computer.  Click System Properties on the toolbar, and then click click here to activate Windows now in the Windows activation area.

    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.  The Windows of Activation Wizard starts.  Click use the telephone system automated in the Windows Wizard of Activation.

  • Slow Internet on my dell laptop corei3 after changing the hard drive

    My hard drive failed and I changed it...

    now, my internet works very very slow many times he hanged but other laptops connected to the same network works very well only my PC has this problem,

    Sometimes it takes minutes to open the new faucet...

    Please let me know what is the problem?

    Hello

    Thanks for posting your query on the Microsoft Community.

    According to the description, I understand that your internet connection is working slowly.

    I suggest to try to start the computer in safe mode with network and check, see the Microsoft article below and check if it helps.

    http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

    I suggest refer you to the Microsoft Help Article below and try the steps mentioned and check if that helps.

    http://Windows.Microsoft.com/en-us/Windows/why-Internet-connection-slow#why-Internet-connection-slow=Windows-7

    Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings. Reset Internet Explorer is not reversible, and all the previous settings are lost after reset.

    Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

Maybe you are looking for

  • Stop text Notifications during phone calls

    How to stop text message notifications sounds while I'm in a phone call without silencing everything? It is very annoying and unprofessional when you talk to someone and there is the same constant beeps heard on their end.

  • Missing titles of the drop location bar

    URLS and page titles are not displayed in the drop-down list the location bar which should view history. Page icons are there on the left, because they are normally, but all the text is missing. I recently had to put an end to the process of firefox

  • OfficeJet 8500 has 910: Macbook Pro won't find my Officejet Pro 8500 printer

    Until recently, my Officejet 8500 910 has worked very well with my Macbook Pro, desktop computer wireless Mac and iPad.  Now, it will not be printed with any of these devices. Yesterday, he worked with my iPad, but today it says that it cannot find t

  • I can't read attachments. When I download they are encrypted.

    Please can someone tell me how I can make these readable downloaded files?

  • Heward packard photosmart 7760

    I have a photosmart 7760 printer and recently bought a special edition laptop Heward Packard. I want to add my photosmart on it, but have lost the software. How can I download it? Can you please help? I need my printer ASAP! My laptop has windows vis