After the help of Animation effects

Similar Questions

• Blur of the lens not no projection in after the release of 2014 effects CC

  Hello

  As I am new to After Effects - environment video Copilot I can't understand this is why, after the plugin in the effects folder I do not blur lens Effects > blur and sharpen > Lens Blur?

  I'm working on the project named ParticleDesign which can be found here. How can I solve this problem?

  I see that Camera Lens Blur as the only close effect Lens Blur blur...

  There has not been a lens blur effect in After Effects for several versions. It has been replaced by the Camera Lens Blur years effect.

• After the start of 2015 effects all closed pallets

  Hey there,

  I've just updated to ae cc 2015. First start, everything was fine, but second early on consequences, the only window I see is list of rendering, everything else is closed. I am also unable to open any new windows/pallets, because almost everything in the menu is grayed out. Reset preferences did not work. The only thing that has so far allowed has been reinstalled after effects. But I can't reinstall ae every day...

  I am running OSX Yosemite on a 5 k Imac.

  Please help, thanks.

  You started the application of rendering engine, not the After Effects application complete.

• After the movements of camera effects?

  Hello

  I am currently working on an animation, and I have a small question. So far, I've been moving everything in my composition around the monitor to make it look as if the camera was moving around them and not vice versa. I was wondering, is there another way to do it, as for example, movement of the camera itself, with the ability to set keyframes for it, etc.?

  Thank you

  Jack Reynolds

  After Effects CS6, Windows 8.1

  This page contains information about the animation and the moving cameras:

  Using After Effects | Cameras, lights, and points of interest

  Start here learn After Effects:

  http://Adobe.LY/AE_basics

• After the problem of editing effect

  Hi, I have problems to update to the latest version of After Effect via Creative Cloud.

  It starts downloading but after awhile, it will stop.

  I found this window with an error message.

  In Italian we say:

  If during the film. (U44M1P7)

  Must be in English.

  Errors during installation. (U44M1P7)

  Any ideas?

  Concerning

  Daniele

  See the following help documents:

  U44M1P7 - updates:

  http://helpx.Adobe.com/Creative-Suite/KB/error-u44m1p7-installing-updates-CCM.html

  U44M1P7, U44M2P7 - CC help / cannot apply the extensions 6.0.2 update manager | Mac OS:

  http://helpx.Adobe.com/Creative-Suite/KB/unable-apply-Extension-Manager-Update.html

• After the trial of cs6 effects does not download

  Hi, I have problems to download after effects cs6 trial, download assistant is to throw an error and the Download Manager is not at all equipped of AE. It was this wasy for 3 weeks. Help, please.

  N °

  http://www.Adobe.com/products/AfterEffects/FAQ.html#64bit-support

  "I use a 32-bit version of Windows and want to buy CS6 Production Premium or Master Collection. What should I do?

  Under Windows, versions CS6 from Adobe Premiere Pro, After Effects, SpeedGrade and still need a 64-bit edition of Microsoft® Windows 7. If you use one of the following operating systems, you will not be able to install or run these applications:

  • 32-bit editions and 64-bit of Windows XP Edition family or professional
  • 32-bit editions and 64-bit of Windows Vista® Home Premium, Business, Ultimate or Enterprise

  If you use one of the listed incompatible operating systems, Adobe recommends that you upgrade to a 64-bit Windows 7 Edition edition Home Premium, professional or ultimate edition"

  In short, you will need to upgrade to a 64-bit computer and operating system.

• My version of Firefox (I think) does not screen captures after the help. I can't navigate according to the troubleshooting and reset. I want to reset

  I want to reset to remove Mysearchdial. I can help but then my version of Firefox (I think) opens a tab of choice and none include troubleshooting or reset as indicated on the screenshots.

  Hello

  The tags on this issue show that you use Firefox v26. It is the latest version.

  You can find instructions on how to reset Firefox here:

  Firefox - modules to reset and refresh settings

  Please note that if your PC has been infected by adware that is hijacking your browser default homepage etc., search engine so you can find that Firefox settings be diverted even after doing the reset.

  You must ensure that the adware that is browser hijacking is removed from the computer before resetting.

  You can try these free programs to search for malicious software that work with your existing anti-virus software:

  • Microsoft safety scanner
  • MalwareBytes' Anti-Malware
  • TDSSKiller - AntiRootkit utility
  • Hitman Pro
  • ESET Online Scanner

  I had particular success with MalwareBytes and Hitman Pro.

  More information can be found in the article troubleshooting Firefox problems caused by malware .

  I hope this helps. Let me know if not.

• After the responsiveness of space effects

  Hello

  I have currently updated to CC2015 and since then I had problems with the naked head of reading/space reactivity in AE. I somethimes must press space 3 times to stop the playback head. Very annoying. Seems that there is someone having the same problem in first CC2015:

  CC2015 - responsiveness of the SPACEBAR

  But there's no solution. Someone else?

  It seems that AE reacts, because the 'RAM game' and fps in the Info Panel meter meet the SPACEBAR (soon disappear, as if the playhead stops. "But the reading head is run).

  I'm running on Win8.

  Assumptions?

  The corrections after effects CC 2015 (13.5.1) update is available, with great difficulty to previews and more: http://adobe.ly/1Il5JYe

• After the properties of transparency effects CC 2014 pre comps, collapse of transformation, is more keys? !!!

  Hey there,

  Lately I use After effects CC 2014. Now I had to experience, after having optimized (collapse transformation) pre model, the transparency of the global property no longer works.

  I can make keyframes, but the pre comp acts as my easy ease keyframes are hold keyframes. Btw If the transformation of reduction button is unchecked, it works very well but as I don't optimization features. There is a catch 22. Of course, I can go in my pre comp and set keyframes there, but it's pretty boring and seriously not the way to work.

  So is this a bug in CC 2014?

  Assistance is needed.

  Specifications of the computer:

  Mac osX 10.9.4

  2 x 2.4 GHz Quad - Core Intel Xeon

  32 GB 1066 MHz DDR3 ECC

  ATI Radeon HD 5870 1024 MB

  Thanks for the tips

  Gwen

  Layer styles in a different order, so a lot of things can get the dirt with you to use them. They are still usable in complex situations, just apply them to the right place in your composite. I've never found a situation where I needed a layer Style and another effect that I have not been able to work around this limitation.

  There are other things that change the rendering order. After Effects only doing one thing at a time. The basic order made is registered directly in the timeline view. Here is a sample.

  Base with the layer Style effect is turned off:

  

  First mask 1 is applied to the layer, then mask 2 is subtracted by creating the hole

  Then fast blur is applied, then bbad edges to create the button with rounded edges

  It will record the processing controls and the anchor point is evaluated, the position reported, then scale, then the rotation and finally the opacity

  Then the layer Style is applied.

  In my design of button I want to apply a line on the button, so that I look like this but with the soft base and a race inside hole:

  

  But, as you can see I had to disable the Fast Blur to get the hang of working because the layer Style race is calculated from the alpha channel, how fast blur made 76 pixels wide, so with a fast blur on I get this:

  

  The solution to my problem is to compose before and add the layer style to the demo and then use an adjustment with masks for the fast blur layer to get what I wanted first place:

  

  Here is what AE done with the final project.

  1. The background layer is rendered
  2. The model of the pre is added to the mixture
     1. Inside the pre-comp layer is rendered
     2. Mask 1 is added to give rounded corners
     3. Mask 2 is subtracted to puncture the hole
     4. Layer styles are applied to add the line
  3. Back to the main competition is rendered the demo
  4. Bevelled outlines is applied to the demo using the alpha chanel
  5. Now the adjustment layer is added to the mix
  6. Mask 1 is added, and this limits the area in the underlying layers, where the effects applied to the adjustment layer will work
  7. Mask 2 is subtracted from her prick a hole in the adjustment layer effects
  8. The fast blur is added don't blur than the lower edge of the button

  There you have it. One in the tutorial of depth on the rendering order in AE and how to use nesting and comps pre to reorganize the effects to get what you want.

• USB and a targus wireless mouse does not work, even after the help of MS tech.support

  Microsoft Tech. checked my pc online to see if I could connect my Targus mouse and its usb device. He said that I can. I still can't activate it

  Hi DebraKennedyUP,

  1. did you last changes made on your computer before the show?

  2. What is the operating system installed on your computer?

  3 - is the same mouse work on different computers?

  Perform the following troubleshooting steps:

  Method: 1

  Configure the computer to clean boot and check how it works.

  To configure the computer clean boot, follow the steps in the below link:

  How to perform a clean boot

  Note: After checking in the clean boot, follow step: 7 article to reset your computer to normal startup.

  Method: 2

  Run the troubleshooter of material to find exactly the problem.

  Open the hardware and devices Troubleshooter

  Method: 3

  Also, proceed as shown in the following link.

  Hardware devices do not work or are not detected in Windows

  Method: 4

  I suggest you to update the drivers and check how it works.

  Updated a hardware driver that is not working properly

• After the lips to animate effects

  

  I'm trying to link my time remap to the slider so I can animate lip sync mouth in after affects CC 2015.3. When I alt-click on the time remapping it gives me the possibility to choose the whisk (or bind my time remapping to cursor) who am I hurting?

  your switches column is missing. Add right here

  

  or here:

  

  There you go:

  

• CS6 after the problem of pixelation effects

  Most of the time when I rub the timeline in my current animation she rasterizes bringing corrections extremely difficult.

  This is how Adaptive mode works simply and well, if it is that serious and it is deteriorating with even a simple model, then your system is simply not enough juice.

  Mylenium

• After the main window of effects equipment

  Hello

  I'm new with sequels and I probably hit the wrong key, now the main window is in mode "full screen".

  which means I can't resize the AF window and do appear on a part of my screen, it still uses the entire screen.

  and I do not see the file name, that I am, or the 'x' button

  

  the equivalent photoshop for this case is "full screen mode" and the shortcut to toggle however modes is "f".

  hope I made my self clear enough

  Thank you

  Seems that you pressed the shortcut key Alt + \.

  This program all fullscreens. Try to press Cancel again

• I did this after intro animation effects and it was made entirely from photoshop files and my comp settings in AE is HDV 1920 x 1080 25, then I was asked to the release of the film in 1920 X 1080 MPEG H.264 NTSC 29.97 progressive, someone has an idea how?

  I did this after intro animation effects and it was made entirely from photoshop files and my comp in AE settings is HDV 1920 x 1080 square pixels 25,.

  Then they asked me out of the movie at 1920 X 1080 MPEG H.264 NTSC 29.97 progressive, someone has an idea how?

  1. to adjust for NTSC composition without affecting the report l / h.

  2 - this film must be rendered in RGB + ALPHA, and yet the mpeg does not support this definition, it seems that the record will be in the video codec animation or other.

  I am bit confused if I need to adjust the model, or leave it and set the video codec only.

  Thank you

  If you have (or get) MPEG Streamclip, which is free, you can open the anamorphic clip and resize it to 1080 true. You will be able to choose H.264 as a codec. It will be if necessary deinterlacing. Suppose that the MPEG card is a MP4 container.

  Good luck.

  Russ

• Animations in the taskbar are lost after the installation of Windows 7 Service Pack 1!

  Hello

  Today I installed Windows 7 Service Pack 1. After you install the service pack, all the animations in the taskbar are lost! I tried to restart the computer 2 times, always the same.
  Then, I uninstalled SP1. The animations are back! Now I tried to reinstall SP1, and the animations are lost again! I want to have the SP1 and animations.

  Help, please!

  Marko Calasan.

  Hello

  ·         Are you referring to the Aero features in Windows 7?

  I suggest you run the aero Troubleshooter and check if that helps resolve the issue.

  See the link below to open utility troubleshooting Aero.

  Open the Aero Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Aero-Troubleshooter

  See also:

  Guided Help: Troubleshoot aero in Windows 7

  http://support.Microsoft.com/kb/976170