My version of Firefox (I think) does not screen captures after the help. I can't navigate according to the troubleshooting and reset. I want to reset

Similar Questions

• address bar does not respond by typing the URL and press on enter

  Address bar does not respond by typing the URL and press to enter. All the other links work well. I used version 7 and version 8 upgrade did not fix the problem

  I had the same problem. I just uninstalled digsby ask toolbar, and now it works.

• Creative cloud does not remember IDs after the computer restarts

  Creative cloud app does not remember login after restart of the computer, or simply when it starts after having turned it on. The app starts up fine and appears in the notification area (Windows 64-bit 10), but I have to log each time until I can get updates, etc. This problem started about 3 weeks ago and I still have to find a solution. Does anyone know how to fix this?

  In this case I advise you to Contact customer services as technical troubleshooting may be required.

• On the Bookmarks tab, I don't have a tab to organize bookmarks. Who was my earlier version of Firefox, but it does not appear in the version 4. How to bring back this tab?

  I'm trying to access the Bookmarks tab organize and can not find since I upgraded to version 4 of Firefox. He has been on the Bookmarks tab, but does not show now. How can I get that back?

  "Organize bookmarks" has been renamed to "show all bookmarks" in the bookmarks menu.

• Installed the new version of Firefox, scroll wheel does not work

  Installed the new version of Firefox, now my scroll wheel does not work. I need this problem immediately or will be forced to give up Firefox as my browser. Can anyone help? I've seen some Q & A on this, but no trouble. Thank you!

  This has happened

  Each time Firefox opened

  == Immediately after installing

  UPDATE: I've updated my synaptics driver for my touchpad (by going to the device by clicking on Update Manager in the tab drivers mouse) and this fixed the problem not only for my touchpad, but also for my USB mouse. My computer is a laptop HP, is told by the way.

• xdg-open does not take into account the url and opens the different website when Firefox is the default browser in Ubuntu

  I am running Ubuntu 14.04 64 bit with Firefox version 38 for Ubuntu
  It is complected, and I tried to explain everything clearly.

  Today, I noticed a strange behavior.
  I have several URL saved as .desktop files.

  I use webupd8.org as example.
  The code for the exec in the desktop file is:
  Code:

  Exec=xdg-open http://www.webupd8.org/
  

  Today, I noticed that if I try to go to webupd8.org, or most of the other sites, by launching the .desktop file for this site, or by typing the url
  Code:

  http://www.WebUpd8.org/

  in the dashboard Firefox opens to a completely different site. The site that opens is a site that I set up for my children's grandparents to watch videos and see photos of the children. This Web site opens each time. I'm not be directed to a site at random each time. This is the case when I try to visit the webupd8.org OR one of several websites using .desktop file or enter the url you want in the dashboard. Whenever I went to my own domain.

  It happens that I have also several sites registered in a reminder in the Firefox icon in the Launcher sidebar thing in Ubuntu.
  In the case of the beast, the exec code is slightly different and it still responds as it should. In this case, I have:
  Code:

  Exec = firefox-new-tab http://www.webupd8.org/

  Also, if I change my default in opera browser, for example as .desktop files and entering the url directly in the dashboard work as it should.

  To recap:

  When Firefox is the default browser, enter a url in the dashboard or use a to surf to a desired site .desktop file causes my be redirected to my own domain name (which is hosted remotely and not on this computer).

  If, however, I change the Exec command in the .desktop file
  Code:

  Exec=xdg-open <url>
  

  TO
  Code:

  Exec = firefox-new-tab < url >

  the .desktop file will open Firefox and go to the desired site.

  If I change the browser by default Firefox to another browser, everything works as it should and has always so far. That is, with the Opera for example, both
  Code:

  Exec=xdg-open <url>
  

  and
  Code:

  Exec = firefox-new-tab < url >

  result in the browser by opening and going on the planned site. Typed a url in the dashboard is not a problem if the default browser is not Firefox.

  Anyone seen this before? If so, how to solve it?

  Thank you very much for your answers!
  I checked the url of the home page in Firefox and it has been set at startpage.com, but then when I looked at the default programs in Ubuntu, I noticed that the default program for the web had been unintentionally configured to use a .desktop file that leads to t he admin for my Web site login page.

  I changed this back to Firefox and the problem was solved.

• Why Firefox 4.0 does not save passwords even the box is tigged?

  I installed the version of Firefox 4.0 yesterday for the first time. He did not transfer the passwords from IE, only bookmarks. Icuold yesterday save a password, but it doesn't today. When I want to save the password, Firefox don't ask even on this subject. Tool box / Options is tigged. I even tried to take the tigg far and swichts off the Firefox and after you start then putting the tigg in the box, but it did not help. What should I do?

  • Take a look at your Options > privacy > history
  • Make sure that you do not choose "never remember history".
  • If you choose "Use the custom settings for history", make sure that "Permanent Private Browsing Mode" is unchecked.

• A game running adobe flash player does not crash - it restarts the game and lost course. What can I do to fix?

  Get more than 50% of the time on Shockwave.com "crossword" - also occurs on Addictinggames.com

  Recent crashes of some multimedia content (this includes the Youtube videos, some flash games and other applications), in collaboration with Firefox are most likely caused by a recent update Flash and/or malfunction like Real Player browser plugin.

  To resolve this problem, follow the steps in these articles in the Knowledge Base:

  • Flash Plugin - maintain and troubleshoot
  • Adobe Flash plugin has crashed - avoid that it happen
  • 11.3 Flash does not load video in Firefox

  We'll find other information on more technical issues under these links:

  • http://forums.Adobe.com/thread/1018071?TSTART=0
  • http://blogs.Adobe.com/asset/2012/06/inside-Flash-Player-protected-mode-for-Firefox.html

  Please tell us if it helped!

• Satellite A210-199 does not start successfully after the BIOS update

  Hello

  I've got Sat A210-199.
  Yesterday I updated the BIOS, and after that problems occurred:

  While restarting my computer does not start. When I enter the BIOS after a while, it shuts down.
  I guess all this because the temperature of the CPU:

  When I do nothing it is 77 C. I don't think it's normal: (.)
  Computer is very recent, so it's probably not dust inside. And it's so hot from the start, but after the new BIOS, something bad happens.

  Why this temp is so high?
  There is no any process background or something.
  Is this normal?
  And what about this new BIOS?

  To be honest, something like this should not happen. I really don't understand why this is happening. I have updated the BIOS on friends A200 and mine P200 and everything works fine. Here on this forum we can only speculate on this issue, but what you need exactly's professional opinion.

  This probably not help but install recovery image and check with the factory settings. Make sure you also on the lower side cooling fan is not blocked and the laptop can be cooled properly. If the problem persists, you should contact the nearest authorized maintainer and clarify this issue.

  Sorry, but I don't really know what you can do in this situation. I don't see any other way to solve this problem.

  Good luck!

• 850 - 009na M1Z34EA #ABU: CPU fan for the 850-009na feel like Phoenix does not turn down after the power - on self test unless the BIOS is entered

  Hello

  I have posted responses to other posts on this topic, but thought I'd start a new thread to gather my conclusions. I'm sorry for a trial

  This PC is virtually brand new (only a few weeks now) and otherwise perform exceptionally.

  Basically, if the machine is disconnected from the power grid (i.e. the power is off at the plug or the power cord removed), when the machine is supplied then the CPU fan turns over 2000 rpm and stays there. All the other PC that I do this too, but the fan will slow down after turning upward. I know that this is done as part of the POST to check that the fan is running.

  If I go into any installation of seed, start-up or BIOS for example (i.e. by pressing ESC or F10 etc.), the fan will slow down immediately up to 700 rpm. It will stay like that until the next time the machine is started against the cold. If I shut down the PC - watch or stop - but do not cut the power supply, then the next time the machine is started, the fan is still about 700 rpm. It is not to turn up to 2 k + RPM when lit.

  As soon as I unplug, then the next time the PC boots, it will turn to the top and I have to repeat steps - off, boot, enter the BIOS, exit and continue. It is something to do with the cold start.

  Note that I don't have to do anything in the start menu - I for example go to the BIOS settings, exit without saving the changes, and the fan will still slow. It's going in the boot sector that slows down the fan.

  When the PC started out-of-the-box, I opted for the upgrade to Windows 10 during installation. I have read in various places that people had experienced after the upgrade, so I reset the machine to factory settings (Win 8.1) and have not upgraded, but the problem persisted. However convinces me that Windows 10 has been removed completely, as when I went to restore the backup image (i.e. dating back to what I had before the factory reset) there are references to 10 Windows (for example, it says 'Continue to Windows 10' as well as various food options). I do not understand UEFI so I don't know if that was involved.

  I tried to change the power plan options "Processor power management-> cooling system strategy" on the liabilities side, but no joy there.

  I think that the fan and sensors work, based on the findings below. These readings of temp and fan are taken from AIDA64

  After starting cold (current was cut, without entering the BIOS), machine runs dry without load

  

  Exactly the same thing--starting in cold, but go in the BIOS, do nothing and continue. Once again, no load

  

  This is after power off and resarting, but to let the PC network

  

  After the above, I used Prime95 to put the CPU support (use of 95-100%), and after an hour, the readings are:

  

  Note that even so, the fan was not particularly strong, but it's at 2222 rpm as in the first reading.

  If I play at 4K (the whole point of the PC ) the CPU so far got very warm, the GPU is but his fan turns up as planned.

  In conclusion, it seems that the POST has a problem because it does not slow down the fan after the test.

  I can live with let the machine always plugged into the sector (for example, most of the time) and I guess that's what most people do, but I would like to know what the problem is (for example if it's really something 10 Windows, or a bug in the BIOS/UEFI)

  Thank you very much!

  John

  Explain you a lot of people who maybe have returned their system immediately because of this? Others might judge normal sound. Not irritable average is not coming here to complain. Others might judge her so little. They simply don't like. You will never convince me that is not a BIOS problem. As the problem resolves itself when you enter manually each time. It can be reproduced every time.

• Windows XP Pro does not correctly load after the release of the Radeon graphics driver

  Hello

  I have a Shuttle XPC with Windows XP Pro and an ATI Radeon Sapphire graphics card. The entire system is 5-6 years, if that helps my raw description.

  My graphic card Radeon has had performance problems, so I downloaded ATI "autodetect tool" and he did choose the update of the driver concerned. After installation and reboot, my PC load Windows XP, but remains unused in ' grainy 8 colors low resolution version ' of my office. No icons, toolbar or whatever it is well visible. The mouse moves the pointer autour, but does not respond to clicks. The only combination of keys which gives anything is Ctrl + Alt + Delete, raise the usual options (in this case useless) to lock the computer, close the session, stop etc.

  In short, it seems that I'm not really on my desk, even if it loaded my wallpaper by default.

  'Safe mode' or "last working configuration" does not take me anywhere useful.

  How to contact with the system to at least start to change my settings for graphics cards?

  I thank very you much for any help.

  Hello

  I suggest to follow the steps provided and check if it helps.

  Method 1: How to fix a computer that does not start.

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

  More information: Advanced Troubleshooting for General startup problems in Windows XP: http://support.microsoft.com/kb/308041

  Hope this information is useful.

• OME does not receive details of the inventory and the State for some devices

  OME does not receive the details of the inventory and the State for some servers.

  For example when looking at one of our PowerEdge R620s is all that presents itself:

  

  iDRAC firmware and LCC is updated (version 2.21.21.21 is installed.)

  I reset the iDRAC, and that did not help.  I have no problem with most of the other R620s in the same range of discovery.

  I deleted the object to OME and re-discovered twice over the past week it but did not help.

  Things seem ok when I use the troubleshooting tool:

  

  Anyone has any info on what may be going on here or how to fix this?

  Thank you

  Hello

  Thanks for the details in the post.

  Wanted to check what version of OME use you - OME 2.1?

  If so, this behavior with ws - man discovery could potentially due to expiry of certificate on this device. You can launch the iDRAC user interface and confirm the certificate information.

  2.1 the OME, the WS - Man communication component is updated. The most recent component does not communicate with the device if that device has been exceeded in the certificate.

  Sslresetcfg running via racadm will reset the certificate. For details and solution, see same threadhttp://en.community.dell.com/techcenter/systems-management/f/4494/t/19653767 .

  Let us know if that helps.

  Thank you
  Vijay

• Site of the muse does not fully convert to the phone and Tablet

  Hello

  I've been a paying member of Adobe Muse (no member of cloud).

  I am unable to get Muse running on the modes 'Tablet and phone. When I click the buttons phoe or tablet, it will make the changes, but give me all the pages are empty, except for the images of the pages.

  I uninstalled Muse and deleted the folder and went to "regedit" deleted all the files Adobe Muse.

  I downloaded the new version of Muse of http://www.Adobe.com/go/muse_latest_win , new version of AdobeAir thus also downloaded.

  Yet, I can't use Tablet functions, or phone.

  This is the Web site; www.ahmettan.com

  Could you please help me.

  Thank you in advance,

  Denis

  I think you should watch the video again:

  1 Terry click on the + tablet button, not the phone.

  2 Terry chose to copy on the desktop Site Plan and backgrounds. There is no option to copy ALL the contents of the page, nor that he claims that this is possible. The content that you see after that he created the Tablet version is all coming from the master page.

  3 Terry said that he has already created phone available, there is no alto! When something is converted automatically, and he claims that you can.

  4 adobe TV videos are more 'miss' as 'hit' but your criticism is unfounded in this case.

• .chm TOC using variables - print SSL does not recognize anything after the variable

  Here's something interesting that I came across today.  I think that maybe it's a bug in RH 10.

  I create .chm TOCs using variables.  For entries of table of contents of page, a content before the variable in the table of contents entry converts to the table of contents printed without problem.  But any content after the variable is ignored.  It's only a problem with the pages in the table of contents.  Books are very good.

  For example:

  Book TOC:

  "Clinic - {variable} {variable}.

  This translates very well to the table of contents printed in printed documentation SSL.

  Table of Contents Page:

  "Clinic - {variable} {variable}.

  Aside from the link in the table of contents page, the code for the TOC book and page table of contents is the same.  But, for some reason, anything after the * first * variable in the page table of contents is ignored in the table of contents printed for printed documentation SSL.  It doesn't matter if it's another right or variable text.

  

  In the image above, both the "clinic - display the list of participants in the" book of the TOC and TOC page on the left contains two variables:

  "Clinic - {variable} {variable}.

  On the right page "Clinic - Participant list", the variable "screen" is ignored and deleted page table of contents only when the layout of the chapter is created for printing SSL.  HR will remove anything after the first variable in the table of contents page, whether it's a text variable or right.  HR does not remove the antything of a book TOC when the presentation of the chapter is created for printing (visible in the picture above).

  Post edited by: eeddings - added image to visually show the bug.

  When you generate print books will go in the printed document.

  Pages in the table of contents of the document are not based on what is in the table of contents above, but on the topic title.

  Add the variable there and it works.

  See www.grainge.org for creating tips and RoboHelp

  

  @petergrainge

• Windows does not start until after the second day to have.

  I just got my laptop Toshiba yesterday with Windows 7 above. I used it for about 4 hours, when I'm done I turned it off by saying it close here go to start > stop. Before putting the laptop on I saw the lights on so I pressed the manual to close button, at the last second, I saw he said something as 341 on 356 updates installed, do not turn off the computer. I don't think a lot because I was tired so the next morning, I try to turn on my laptop and it stops after the Windows 7 load loading animation, and all I have is a black screen with a mouse. I tried to run in safe mode, same thing black screen with my ability to see where is my mouse.

  Contact Toshiba support under your warranty. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft