After the reinstallation of Windows 7, it does not load and restarts continuously

Similar Questions

• Windows xp sp3 system root of the Hal.dll error or not found after auto update of windows system corrupt does not load.

  12/07/2011 my system automatically downloaded a system update and rebooted when it restarted, it wouldn't load windows and gave this error message. What should I do? I tried to remove the hard drive and put it on another computer if I could look at the problem but I don't know what to do to fix. My backup information are on another hard drive in the original computer. I use Norton 360 for my backups.

  It is extremely unlikely, there is nothing wrong with your file hal.dll despite what says the error message (do not try to replace).

  It is extremely likely that XP just cannot find the fine hal.dll where it says to look for.

  XP is maybe not able to find the file, it's file system is corrupted (Norton that sometimes), or if your c:\boot.ini has somehow become corrupted and told XP to find files in never never land.

  You must first run a chkdsk /r on your distressed HARD drive and if that does not do it, you have to redefine your boot.ini file.

  If you have the drive in another machine, you can open the file c:\boot.ini with a text editor and copy/paste the content back here for analysis.

  You can also rename your file c:\boot.ini to something like c:\boot.ini.bak (so now you do not).  In a single partition installation, XP is not even a file c:\boot.ini to start.  He'll complain briefly, but always begin (unbelievers - try it).

  t can take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  I'll keep an eye on your Norton since when your charge again, Norton System may corrupt your file system again and you will have to repeat the chkdsk/r to repair (so you can set Norton).

  I put the drive in the original system and fix it there with the XP Recovery Console.  After all, it's where he has to work, right?

  If you have any bootable XP installation CD authentic where you can start the XP Recovery CD of Console, you can make a bootable CD from the Console of the Recovery XP (no XP media required).

• After the updates of Windows 7 computer does not start

  I received a notice from the system Windows 7 updates have been downloaded and available for installation. I selected the installation of updates. After the updates when installed I was in charge to restart. The computer will not start at the top. It tries but stops at a blue screen with a cursor. I tried to boot into "safe mode" and get the same. I booted from my original Windows 7 disc and I went back to my restore point before the update. It appeared to restore successfully but I still get a blue screen.
  What is my next course of action? I certainly DON'T want to format the drive and start again.

  The only thing I can say is that I know that you will not like to hear.

  It is to re - install Windows 7 (do not enter the product key and uncheck the 'Activation').

  Then immediately turn off automatic updates.

  Then, go to the Microsoft Update site and only install one update at a time (make a note of the number KBXXXXXX), restart and check that you do not get the blue screen. Then download the next update and repeat the process until you either find to have installed the offending update or updates without any problem. If all goes well and the problem did not repeat, then you can activate Windows.

  If you find yourself always with the blue screen after a given Update call Microsoft and tell them. If they won't listen, then create a new post on this forum, making reference to the question of the blue screen AND the number associated with the update. Also post the number here if I can do some research on the problem.

  JS
  http://www.PAGESTART.com
  Never be afraid to ask. This forum has some of the best people in the world to help.

• After the upgrade to Windows 10 Firefox does not display some Fonts/Icons correctly

  Firefox displays a box with numbers inside instead of icons on some websites. I saw several other threads, and the problem was solved by allowing the pages to choose their own fonts. I confirmed this setting is enabled in the GUI and subject: config. However, the question is always natural. I disabled all addons, restarted FF and question persists. With the help of FF 40.0.3.

  I found the root cause of the problem. In Windows 10 when the WIndows Firewall service is stopped (I like this option disabled, I throw a perimeter FW), the problem occurs. Start the Windows Firewall service and everything is fine. Hope this helps others.

• I got an ipad 2, but after the ios 9.3.3 it does not load

  I got an ipad 2 but after that I updated ios 9.3.3 does not charge... What can I do?

  Let the iPad charge for at least half an hour and if it does not seem to be supported, see the following article for the troubleshooting steps. If your iPhone, iPad or iPod touch won't charge - Apple Support

  -AJ

• I loaded the new update for Firefox today and received a message from 'need to reboot to complete the installation'. However, even after restarting several times the update does not load and he always invites me to restart my computer.

  The update does not load, and I can't "remove" program to my computer and reload as the same (needs to restart to complete the installation) error message keeps appearing even after several reboots.

  Do a cleaning (re) install and delete the folder of the program Firefox (C:\Program Files\Mozilla Firefox\).

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html

  Uninstall your current version of Firefox if possible.

  • Do not remove the data of a personal nature when you uninstall the current version or you lose your bookmarks and other data in the profile folder.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  Your bookmarks and other profile data stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup

• I have windows 8 and ip4000. The software does not load and it doesn't seem to be a driver for 8 64-bit windows. What can I do?

  I have windows 8 and ip4000.  The software does not load and it doesn't seem to be a driver for 8 64-bit windows.  What can I do?

  Hello

  I had the same problem.  I was able to get around by loading the driver for Windows XP 64 bit from the Canon web site and then install the printer using the normal menu of 'install new printer' Windows 8.  If I remember correctly, I could have gotten an error message or two, but the printer appears in the printer window and ran very well.  Hope this works for you as well.

• After the update (December 2015), Camera Raw does not fit on the save new Camera Raw default.  It keeps coming back to the default settings.  Does anyone else have this problem?

  After the update (December 2015), Camera Raw does not on the save new Camera Raw default.  It keeps coming back to the default settings.  Does anyone else have this problem?

  Yes, this is the same bug.

  The engineering team working on it.

  We have no fixed timeline.

  In the meantime, you can restore the previous update.

• After that I put my password, it indicates that my personal profile does not load and it gives me a temp

  original title: Login - personal profile

  After that I put my password, it says that my personal profile does not load and it gives me a temp.  He told me to go in the event log or contact administrator

  Your computer has recently made an update? There are now three consecutive profile simillar problems in this forum. I checked my update and there are 13 important updates, I invited I have to wait. I hope that someone could come up with the cause. The problem is serious, which can lead to loss of your files.

  Vista - user - logged on with a temporary profile profile error

  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  I hope I could help

• Windows Media Player does not load on my desktop HP H8 - 1080t

  Windows Media Player does not load on my desktop HP H8 - 1080t.  I'm using Windows 7 OS.  When I click the icon, I get a small flash, and that's all.  Thank you.

  You can fix the problem with Windows Media Player in uninstalling and reinstalling Windows Media Player via configuration, programs and features Control Panel, add/remove Windows components.

• My windows Security Center does not open and I get a notice that "no software firewall is detected.

  My Windows Security Center does not open, and I am also unable to turn on my firewall.  I get notification "not detected any firewall software.

  Hello

  It seems that you need help to solve the problem of Windows Security Center. Please respond to the suite, which will help us to help you in the right direction.

  1. do you get an error message when you try to turn on the firewall?

  2. which antivirus app do you use?

  Refer to the following information and check the status of the issue.

  See the section "Nithyananda J replied on November 27, 2009" what about Windows Security Center

  The windows Security Center service cannot be started.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/the-Windows-Security-Center-service-cant-be/d8250e7a-ee3c-4302-8CA6-9e2a10262feb

  I also suggest you to run the Fixit from the following link.

  Diagnose and automatically fix problems of Windows Firewall service.

  http://support.Microsoft.com/mats/windows_firewall_diagnostic/en-us

  You can also try to solve the problem by running SFC scan

  Make the SFC scan and check the status of the issue.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  I hope this helps.

• Right-click the folder or any other function does not work, and I don't have a sticky key...

  Right-click the folder or any other function does not work, and I don't have a sticky key...

  While I click right click in windows Explorer has stopped working... Help, please!
  

  A Virus Scan. Your PC can be infected. If you have not installed it, use MS Security Essentials if you have a genuine Version of Windows. It's free.

• After the use of commercial software, Netflix does not work in Windows Media Center.

  original title: a SOFTWARE UTILITY NOW NETFLIX in WMC ON VISTA PREMIUM 64 BIT DON'T WORK. ANY CONNECTION?

  WINDOWS MEDIA CENTER DOES NOT NETFLIX. INTERNET CONNECTION WORKS AND I AM A MEMBER AND WAS SIGNED IN. NETFLIX CHARGE UP AND I GET TO PICK THE MOVIE AND PRESS PLAY. YESTERDAY, 29/05/11 WMC GAVE ME A CANNOT PLAY, UNAVAILABLE TRY AGAIN LATER ERROR MESSAGE. TODAY, WHEN I TRIED IT AGAIN BEGINS TO CHARGE UP, I SEE THE CIRCLE OF ROTATION THEN THE SCREEN BECOMES BLACK AND REMAINED BLACK UNTIL I TOUCHED THE BACK ARROW (BUTTON). ALSO I DO NOT KNOW IF IT IS RELEVANT, BUT ON 27/05/11 I DOWNLOADED GLARY UTILITY SOFTWARE AND I USED IT, SO I DON'T KNOW IF I DELETED SOMETHING I SHOULDN'T HAVE OR UNCHECK SOMETHING WHICH IS SUPPOSED TO BE CLICKED, OR OFF A PROGRAM THAN WINDOWS MEDIA CENTER NEEDED TO RUN CORRECTLY. I HAVE NO IDEA. NEED HELP. ANY IDEA IS APPRECIATED. Thank you!!! FOR THE RECORD, I HAVE NEVER HAD PROBLEM WITH NETFLIX IN WMC BEFORE, IS THAT SUNDAY LAST.

  Hi liitkjay,

  There could be many causes for the issue. First of all, you can read the following article and try the steps to solve the problem:

  Known issues and limitations of Netflix on Windows Media Center for Windows Vista

  If you're still having problems, you can uninstall the utility software and check.

  You can view the following link to uninstall a program:

  Uninstall or change a program

  Hope this information is useful.

• HP Pavilion g7 1178 AC: windows jingle/tune does not sound and the start up programs do not start before the RESET

  When I start my computer, I have the lock screen, enter my PIN and then nothing really happens, I get all the blank screens or error messages just my old image of the windows desktop 7, then I RESTART my pc and then I get Windows Small Volkov song/jingle/air once it starts again , then my lock screen and then my start up programs start at work, bitdefender, toolwiz and things are working properly.  I removed my old windows, clean up the files using the disk.

  I do not understand why the windows little tune does not make its sound until I restart?  Does this mean that windows is does not start properly until I restart?  And would that be why my bitdefender is does not properly start as well. ?

  I checked in the Task Manager after the first start-up, he said that the two programs have been activated, but they do not work properly.  I checked bitdefender and it also says that it is on the startup list, but why he doesn't have the things I have planned to start rebooting?

  It is very frustrating having to start my pc, wait a while, then do a reboot to get things every morning.  Suggestions, ideas, help would be greatly appreciated.

  Thank you for your time, sincerely, Niki

  I too was wondering why * nothing * played, even when I had checked the box "Play Windows startup sound" in the advanced sound settings > Sound > sounds section. After a LOT of research (that brought me here, among others) here are the "definitive"...
  
  "By Raymond Wong2015-07-31 13:30:22 UTC.

• After the upgrade to 6, security server does not change the listening Port

  Came across a weird situation where after upgrading a server security 6.1.0 - 2509221, it does not change the listening SSL port during the upgrade, it was not on the standard SSL port.

  It was initially configured to listen on 444 before the upgrade, after the upgrade, I tried to go back to 443 and a netstat-ban shows that it is listening on port 444.

  I double checked the config.properties file and there is no entry for serverPort, and configuration shows 443 in the admin View handler.

  -Re-apply the configuration via the web page does no change, always tuned to 444.

  -Don't restart the service of security server no change, still plays on 444.

  -Restart of the server, no change, still plays on 444.

  -Statically placed serverPort = 443 in the config.properties, always tuned to 444.

  All ports are verified open, 443, 444 and so I think I could have hit a bug. Someone else has security servers that listen on non-standard ports SSL?

  A complete reinstallation of the Security server is provided, changing the port to listen 443, shouldn't have to do that well.

  You checked config.properties, but did you check in locked.properties for the port setting see if it's been moved there before and during the upgrade? Locked.Properties replaces all the configuration settings.