HP Envy h8 - 1417c i7-3770 3.40: computer upgrade HP Envy

Similar Questions

• ENVY of HP dv6-7215nr Notebook PC: portable computer upgrade wireless for AC

  Hi I have the

  ENVY of HP dv6-7215nr Notebook PC

  and it has the Intel Centrino Wireless - N 2230 card. I would like to replace it with a card that meets the standards of the AC and works on a network of 5 GHz. Are there compatible replacement cards?

  Thank you

  Chris Goebel

  Your wireless card is currently not 2 antennas connected to it?

  It should be. I don't think that HP had begun the practice of using only a single antenna for single band wireless cards in this series of models.

  Take a look now before ordering a replacement card, as running a second antenna would require a complete disassembly of the laptop including the area on display at the antenna of the road a 2nd.

  If your laptop's wireless card has two antennas already attached, all you need to do is to uninstall the drivers in the devices and current wireless network card Manager, stop the PC and swap on the map.

  I want to download drivers AC 7260 first, if you are ready to install after you connect your new card.

  I also suggest you get the card with number HP on this subject.  You can find other suppliers and more HP for less money.

  Intel Dual Band Wireless-AC 7260 802.11 ac 2 x 2 WiFi + BT 4.0 HP Part #710661-001

  For example...

  http://www.Amazon.com/710661-001-Intel-wireless-AC-7260-PCI-Express/DP/B00PDLCFL8/ref=sr_1_1?s=PC&ie=UTF8&QID=1455579299&SR=1-1&keywords=710661-001

• HP Pavilion 500-319NA: new to < see below > graphics card

  Hello

  I am new to the computer upgrades and know almost nothing about it, so please keep any simpler answer and understanding as possible.

  My computer is the "HP Pavilion 500-319na".

  It contains the graphics card "NVIDIA GeForce 705" (I think it's a 1 GB model)

  There's a game coming out next year called Overwatch, this graphics card is unable to play the game, so I decided that I want to upgrade this Christmas.

  The graphics card, I have drawn attention is the "ASUS 2 GB GeForce GTX 750 Ti.

  I have mainly two questions:

  • Is my computer compatible with this graphics card?
  • the Geforce 705 dosent require any kind of power, but one that I want (the GTX 750 it) seems to require a power adapter 6 pin or something.

  If anyone could help with any of these things it would be wonderful.

  Thank you, Callie

  You'll be glad you asked, you need to clarify some issues.

  This is your computer.  There really a 180W external PSU?  Or is the power supply inside the box?  There were some variations in generation of HP model #.   If internal, envy is the coast?

  Your computer has a 2.9 Ghz CPU... but Overwatch requires a 3.3 - 3, 46 Ghz CPU. That will slow down the game.

  GTX660 (140W) is far superior to the GTX750Ti (60W), but power is a problem. AQgain, need you a new power supply, but it's an internal model.  See above question. !!!

  You also have a problem of compatibility of the UEFI BIOS.  The GTX750Ti is OK, but the GTX 660 requires BIOS settings inherited.

• [Solved] IRQL NOT LESS or EQUAL coupled with nvldmmkm stopped responding and has recovered

  First things first: https://skydrive.live.com/redir?resid=A9EEBFDA96AC580D%212010

  Here's my dump files.
  As the title suggests, I am experiencing BSOD issues and video driver issues.
  I clean installed Windows 8.1 to 8 and update my driver by Nvidia, and now I can't update to 8.1 for a reason any: http://answers.microsoft.com/en-us/windows/forum/windows8_1-windows_install/windows-81-installation-ends-in-black-screen-of/0099d7bf-f4e0-4853-ae36-da9d126b7162
  But anyway, I tried to fix this on my own. I ran the test of memory included with the computer, and nothing is turned up to. I ran sfc and chkdsk.
  This only happens when I play games.
  I put the power management in the Nvidia Control Panel 'prefer maximum performance '.
  I made sure that in power options, PCI express power management is disabled.
  I have a HP Envy Touchsmart 14 t, which comes with the Intel HD Graphics 4400 and Nvidia GT740M. »
  I'm on other opportunities, unless I have a faulty graphics card.
  Any help will be appreciated!
  Thank you!
  Solution:
  If you have an HP computer, downgrade to the version of the BIOS F.08.

  If you have an HP computer, upgrade to the version of the BIOS F.08

• 8.1 Windows Pro update the problem (from Windows 8 Pro) on Envy 23 TouchSmart all-in-One...

  Hello

  I have a HP Envy 23 Touchsmart all-in-one that I bought a year ago (12/2012). It comes preinstalled with Windows 8.

  System information:

  (a) Intel (r) Core i7 - 3770 S CPU @ 3.10 GHz

  (b) 8192 MB of RAM

  A few weeks after that I had bought the system, I've upgraded to Windows 8 Pro with Media Center that I bought through Microsoft upgrade program.

  Last week (19/10/2013), I saw the option upgrade to Windows 8. 1 in the store and decided to upgrade.

  After a few minutes, I got a prompt asking me to restart the computer, and I did.

  However, I noticed that the screen has turned white, but it restarts not really - I have seen that the hard drive light was still flashing and I waited for about 15 minutes. I know it does not restart because if that were the case I would have seen the HP logo on the screen of the BIOS. A little later, the system entered into mode 'sleep' (at least the light blinked slowly as if it was the sleep). As it was late at night, I decided to leave the system alone and decided to check on it the next morning. The next morning, he was still in mode 'sleep' (as I feared) - when I tried to wake up from her sleep by moving the mouse/hit the return key, he did the exact sounds as if he were to wake up from its sleep (as it always does), but the screen is still blank. The light power button lit up constantly indicating he's awake now.

  At this point, I decided to turn off the system by holding the button for a few seconds. To restart, I saw the HP logo on the BIOS boot screen and the screen went white and nothing came.

  So I decided do a system recovery using my Windows 8 recovery CD and turn off the system with the CD in its niche. This time, the system came and began immediately to restore my OS to a previous version.

  After connecting to the system recovered, I received the following message:

  "Could not update for Windows 8.1.

  Sorry, we could not complete the update Windows 8.1. We have restored the previous version of Windows on this computer.

  0xC1900101 - 0 x 40019.

  I tried to reinstall Windows 8.1 a couple of times after that. Once to disable all non-Microsoft services and disabling all startup programs. Always the same result.

  I have no antivirus software on my other system protection of Microsoft default system software.

  Any help, greatly appreciated.

  Thank you.

  I have disabled active secure boot existing starter and the update worked.  Now we get the error of watermark "secure boot not configured correctly.  But I have re-enabled secure boot and the error disappeared.

• Windows 8 or 8.1 update? HP ENVY TouchSmart all-in - One desktop PC 23-d260qd

  I just bought the HP ENVY TouchSmart all-in-One desktop PC 23-d260qd and it happens today. I wonder if it is better to upgrade to Windows 8.1 instead of windows 8. It seems that several people had problems with the upgrade. I just got my computer today and have yet to open the box, but I wanted to know what OS is better and how I would go about updating Windows 8.1 must be optimal. My computer specs are below:

  • 64-bit Windows 8
  • • 3rd generation Intel® Core™ i7 - 3770S processor [3.1 GHz, 8 MB of shared cache]
  • • 1 GB NVIDIA GeForce GT610M [DX 11, 3. 0a MXM]
  • • 12GB DDR3 1600 MHz SODIMM [DIMM 2]
  • • 2 TB 7200 RPM SATA Hard Drive
  • • Microsoft Office Trial

  Thanks in advance for your suggestions and help!

  Create a recovery disk set before even considering the upgrade.

  If you are not yet accustomed to Windows 8, then give yourself a little time to get familiar with before committing to an upgrade to Windows 8.1.

  I prefer the upgrade of Windows 8.1, in particular the return of the Start button, it is not the same as the Start button was before Windows 8.

  Important factors for Windows 8.1 are available on the web support download portal for your PC.

• HP ENVY h8 - 1420t CTO: the HP ENVY h8 - 1420t CTO upgrade

  I intend to update my graphics card, memory and power supply bu tI have a few questions. Can I put my HP ENVY h8 - 1420t CTO to a 750 w power supply with damaging them.
  
  Also, I wonder how many pins I have to have for my computer. I can't specifically to locate only with the opening of my computer.

  I have a core i7-3770 if that makes a difference

  Hello

  Use a good adjustment of the power supply replacement.  Standard power SUPPLY HP block dimensions are 5.5 "by 3.4"by 5.9".  Something more will compress the distance between the power supply and the optical drive even more complicated wiring and installation problems.  A 750 watt PSU should work but get one with the appropriate dimensions.  If you drop to the low power of some, the Corsair CS650m would be a very good choice.

  If your computer is running a version of HP 8 BIOS the largest part of the most recent graphics card will work providing that they will hold.  Study it posted article.  You need to open your PC and measurement. Generally of less than 10.5 graphics cards "must adapt.

  Thanks for posting on the forum.

• HP ENVY h8 - 1520t: set the bios for the site with riders

  I need jumper to clear the BIOS settings in the CMOS. Does not start to any menu or menu setup after getting out of battery and replacement.

  Thank you

  Chet wood

  Product number:

  C9D47AV #ABA

  • HP ENVY h8 - 1520t CTO desktop PC
  • Win 8 64-bit
  • Microprocessor Intel core i7-3770 CPU @ 34.0 Ghz
  • 8 GB MEM
  • Mem slot 1 8 GB 1600 Mhz Micron
  • Chart AMD Radeon HD-7570
  • Current RES 1920 x 1080
  • refresh rate 60
  • 2AD5 Board of Directors system 1.03

  BIOS 8.14

  2AD5 Board of Directors system 1.03

  The motherboard is the same as indicated, BUT the jumper CMOS block illustrated on the Web page must be another block I watched card mother pictures of this model from EBay and they show the jumper in the position that you indicated.  There are two blocks.  There are two blocks of blue jumpers with the configuration pins as shown in the picture I posted.  I think that what the picture posted is saying leave the jumper on the right side block is and only move the jumper on the left side of the position shown, then again.  Just to clarify, there is a block under this block, we want, and who says "ROM_RECOVERY" and this block has a single rider together 1-2.  Jumper block we are debating is actually marked "CMOS-PW.

  Hope that helps clear things upward.

• Desktop HP Envy h8 - 1420t CTO: problem Samsung SSD causing with upgrading 8.0 to 8.1 Windows

  I can't upgrade my OEM installed Windows 8.0 to 8.1 HP desktop computer.  First, I tried the upgrade when 8.1 was deployed for the first.  It seemed to level OK, but after a reboot I found myself with a black screen... no error message, just a black screen.

  I retried it this morning, but this time it failed with DPC_Watchdog_Exception, then Machine_Check_Exception.  After looking in several forums, I'm "guess" it is maybe disk 0, which is a Samsung 830 Series SSD (model: MZ7PC256 / 0:1, s/n: S0U3NSAC705912 p/n: MZ7PC256HAFU - 000: 1) which has been installed and configured by HP, when I ordered this computer from office in 2012.

  Magician of Samsung software does not recognize this SDS supported a product, but they identify it as a Samsung MZ7PC256HAFU - 000: 1, with Firmware version CXM05H1Q.  I thought I'd see if a firmware update is available, but there is no information about this SSD on the Samsung support site. In addition, HP doesn't offer not just any which firmware for this SSD, not even the original firmware.  What I saw on the internet says that it is a custom SSD OEM which is not taken in charge by Samsung.

  I'm not desperate to upgrade to Win8.1, but I would like to know exactly why the canned upgrade fails.  I have an other available SSD (a Samsung 850 Pro, model: MZ-7KE256BW) that I considered to use to replace the current drive 0, but I hate swapping parts without knowing that this is really the problem.

  I am open to advice. The info on my current system follows. Furthermore, I note that there is no conflict of devices or outdate drivers.

  Desktop PC HP Envy h8 - 1420t CTO, s/n: 2MD3020CF9, Nr C1U69AV #ABA

  Windows 8 Pro 64 (installed by HP)

  Intel Core i7-3770 3rd Gen, Quad-core (Ivy Bridge) 64 - bit processor, 3.4GHz

  Memory: 16GB DDR3

  Disk 0: 256 GB SSD, Samsung 830 Series, model: MZ7PC256 / 0:1, s/n: S0U3NSAC705912 p/n: MZ7PC256HAFU - 000: 1

  Disc 1: 1 TB 7200 RPM SATA hard drive, model: WD10EZEK-60ZF5A0, s/n: WCC1S1261511

  Disc 2: 750 GB SSD, Samsung series 840, model: MZ-7TE750BW, s/n: S1DMNEADB03609

  

  Hello

  Don't forget that the W8 is fully updated before upgrading to W8.1. I would suggest to run for a while after the W8.1 update and see if your PC is stable.  If so, then manually a system restore point and then continue the Windows Update process. If your PC is stable after that Windows updates have been applied then manually take another system restore point and proceed to apply the HP recommended software updates for the W8.1 that are posted for your PC.

• Dumping Windows 8 installation of Windows 7 need help with drivers desktop HP ENVY

  During the holidays, we bought a HP ENVY with Windows 8 is installed, model H8 - 1417C.  This machine has a processor intel I7 3rd generation processor a graphics card from nvidia Geforce GT 630 with 2 GB of memory preinstalled audio beats and 12 GB of RAM as well as a 2 TB HDD.  Sounds like a great machine however several programs I use are not windows 8 compatible over all work via citrx will not load windows 8 anytime in the forseable future.  I therefore decided to remove the original hard disk and replace it with another 2 TB drive and install Windows 7, already purchased.  Today was the day of the change more however when I started hunting for the drivers I came across problems.  HP web site uses drivers for download only in Windows 8.  Its been a while since I've worked inside a machine and Windows 8 only adds to the problems.  But I am sure that if I can find the drivers that I can do the job, that is why I bought the Tablet instead of custom build in order to avoid all this. THANKS in advance for any help.

  You are the very welcome.

  Is there a recommended order generally agreed to install some of the hardware drivers.

  1 chip set.  Install and reboot.

  2 chart. Install and reboot.

  3. audio. Installation and reboot

  4. network cable.

  All others as you wish.

• pictures 1.0.1 quit unexpectedly after printing on HP Envy 5640

  Hello

  I just bought a HP Envy 5640 printer.

  It works very well, but every time I have to print a photo in Photo 1.0.1 NICU OS X 10.10.5, Photos will be leaving after that print is sent to the printer.

  The photo prints fine, but needs pictures to be restarted every time.

  Does anyone have the same problem?

  Any solution?

  Thank you.

  I've not seen posted here - but since you are more than a year behind in updates, bug fixes and new features, you can see a verry old bug that has been fixed many years ago for people who follow to this day - unless he ia a clue right for you m = not updated I suggest you backup and update of OS X Sierra = and Photos 2.0 - this never can solve your problem

  LN

• I have a MacBook Pro, who hates contact my HP Envy 7640 printer all-in-one. Printing can take as long as 10 minutes! If it prints at all! Does anyone have similar problems?

  If I use my iPad to print a photo there is no problem, but if I use the Macbook for the same function, it will be either print it after a long period of time or he'll quit and say "Printing cancelled!" It seems that these problems started after the update. I am running El Capitan 10.11.6. In addition, when you use Hallmark Card Studio for Mac, as soon as I use two back, it will print the first side no problem and then he hangs up and ends by spit the paper without printing the second side! When I got to the printer, everything worked fine, but now...

  Maybe:

  e-with-OS-El-Capitan/td-p/5417344 http://h30434.www3.HP.com/T5/Printer-Software-and-drivers/HP-Envy-7640-compatibl

• How to print multiple copies on a HP Envy 5540

  I'm running OS X 10.7.5. on an iMac. I recently bought a HP Envy 5540, connected wireless printer. It fails to print more than one copy at a time. I see nothing in the software or instructions to change it. Help please!

  It is not clear, put you number of copies in the boxes of Copies and pages?

  Can try this...

  Startup HD, (operation key shift key down to start), run the disk utility in Applications > utilities, then highlight your reader, click on repair permissions.

  All devices which appeared already in your list of printers and faxes list should be added again after resetting the printing system.

  Reset the printing in Mac OS X 10.5.x system +++

  1. To use the reset function of printing under Mac OS System X 10.5.x, follow these steps:
  2. Choose System Preferences from the Apple menu.
  3. On the view menu, choose Printers and faxes .
  4. Control-click on the printer list on the left side of the window, then choose "Reset printing system" from the context menu. If you don't see the list of printers, Ctrl-click on the text "click on + to add a printer or fax" and select "reset printing system...". »
     
     As an alternative, if you have one or more printers from the list, you can click the "-" (deletion of printer).

  http://support.Apple.com/kb/ht1341

  Reset.

• Very slow fire 14.01. Intel I7-3770 computer GZ 8x3.4 crashes

  New Lenovo M92p with 32 GB of Ram, 1 TB HD, Intel I7-3770 with GZ 8x3.4 processors.

  Finally fixed it.
  It is Flash, but certainly not easy to find.
  You may need to run Adobe's Flash removal tool,
  Looks like there is a 32 bit (firefox) and 64 bit (IE)
  has finally got installed 11.3.300.265 and FF 14.0.1 works.
  Before installing, I could see the 'circle' that while the site had been hit and then maybe stop stop. Still green but frozen. Sometimes, I had to do an ALT + TAB to go to another job and after that 1-4 minutes, it would break free.
  It has been interesting.
  Thank you all for all the ideas.

• ENVY 15: HP Support Solutions Framework Service - high CPU usage

  ENVY 15, 10 Windows version 1607

  CPU cycles was about 50% this morning and discovered that the HP Support Solutions Framework service was 40 + % permanently.   No problems so far with high utility usage.  Problem started not with the update of the birthday that was filled with 4 days and there are several reboots.

  At a chat session with HP support, but they couldn't help.

  I stopped running - task seems to restart every time I run the HP support assistant and continues with + 40% of CPU usage.

  Any suggestions please?   Y at - it an update utility that I have to download?

  Uninstall HP Support Assistant HP Support Framework in Control Panel > programs and features

  Then, reinstall the latest version of this link

  http://h18021.www1.HP.com/helpandsupport/HP-self-support.html