After update to Go I have a camera problem

Similar Questions

• After updating to SP3, I have to restart. When I do that my computer goes to a safe mode. How to exit safe mode? I have to do a system restore to fix.

  I'm going to an auto to install update. The installation is correct. But when I do a restart, he comes back in a safe mode. I don't know what to do.

  Any help is greatly appreciated.

  I'm sorry, I thought you were all the same team. One of the members of the staff of microsoft helped me. I had to disable the 'pilot' and I had to change a valur at 4. After that, it works perfectly.

  In response to your earlier questions on Norton and McAfee. Yes thery have been installed with the computer, but I removed the programs. Whenever I tried to download SP3, I got in trouble. But even if I did a system restore. Everything still works from before. Not sure how many times I did it. But I wanted to finally come to a duty case or get a new computer.

  Thank you very much for your help and support.

  Sincerely

  R Q POWERS

• Windows Update indicates that I have a connection problem

  When I try to do a windows update, it says that I have a problem with the connection... when I test, sound fine... im on a cable modem and im always on...

  See if anything here helps:

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  TaurArian [MVP] 2005-2011 - Update Services

• Problems after updating the BIOS on Satellite Pro P200

  I recently buy a Satellite Pro P200 running Windows Vista Business. Yesterday, I updated the BIOS to the version 1.50 supplied with the machine to 1.80 available on the Toshiba site. I double checked that I was using BIOS correct update for the Pro P200 Satellitel running Vista.

  After updating the BIOS, I have now two problems:

  1. whenever I start and join the office, I get an error message "record of Vista has stopped working". This problem has been identified as toshibavistaregistration.exe here: [link: http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=99805]

  2 Control Panel > system now shows the processor and the memory (RAM) as "not available". Execution of the diagnostic PC Toshoba tool and looking at basic information show also no information on the memory (RAM) Although the processor information here. There may be pieces others missing too under the eyes of list shorter than before the update of the BIOS.

  Basically, I want to get everything working again as it should, but cannot find any information on these issues.

  After further review, it appears that the update of the BIOS is not the cause of the problems.

  Immediately after updating the BIOS, I had a major system crash. It turns out that this is what has caused problems.

  After a system restore to a point before the update of the BIOS and the major system crash, now everything is working again with BIOS version 1.8 in place.

• Qosmio F30-147 - no sound after update driver

  Hello

  you I ve a problem with my qosmio f30-147 running with the 32-bit version of windows 7.

  Recently, I wanted to upgrade my Codec driver SigmaTel HD audio a former pilot XP to a latest driver I ve Vista that is on the internet. But after the reboot, there is no noise at all and my windows tells me that couldn t he read the driver for SigmaTel. Then I reinstalled the new driver and installed again the old XP driver (again found on the internet). SAME PROBLEM! Now it s not even working with the old driver... someone knows what evil? I have can´t NOTHING on google or elsewhere, West found no official Site of Sigmatel and there is no sigmatel drivers on the toshiba site. Please help me I need my sound as quickly as possible without having to reinstall the system.

  hosts of the Germany, sry for my English untrained! Help, please!

  Hey,.

  This strange but may s I ask you why you updated audio driver? Have you had problems with this older version?

  Anyway, in your case I would try to restore the system to a point. Usually this should restore the previous version of the driver, and the noise should start working again.

  Check this box!

• Update: installed Vista update 10/29/09 (have only already installed SP1) now computer freezes randomly

  Given that I'm running in safe mode I can't set up the log with the error code.  I've had various errors after update 8/25 - I have not removed it and wonder if this could be the cause of the problem now.

  If I delete these updates, should I allow updates of the 29/10 reinstall or is this a new problem?

  Updated - removed 8/29 updates and have always freezes.  This is an error event report that seems to occur at the time of the accident

  Log name: Application
  Source: Microsoft-Windows-search
  Date: 2009-10-29 19:01:18
  Event ID: 3030
  Task category: Gatherer
  Level: error
  Keywords: Classic
  User: n/a
  Computer: sz - PC
  Description:
  Cannot initialize the Gatherer service.

  Details:
  The Temp folder is on a drive that is full or inaccessible. Free space on the drive or verify that you have permission write to the Temp folder.   (0 x 80070660)

  The event XML:
  
   
     
      3030
      0
      2
      3
      0
      0 x 80000000000000
     
      7105
     
     
      Application
      SZ - PC
     
   
   
     

  Details:
  The Temp folder is on a drive that is full or inaccessible. Free space on the drive or verify that you have permission write to the Temp folder.   (0 x 80070660)
  
   
  

  Hi Pacoffeegirl,

  Welcome to the Microsoft Answers site.

  Follow the steps mentioned below.

  Method 1:

  You can reset the Windows Update components. To reset the update Windows components automatically follow the steps mentioned below.

  1. click on the button to resolve this in the article mentioned below.

  2. click run in the file download dialog box and follow the steps described in the fix it Wizard.

  For more information, see the article mentioned below.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 2:

  This error occurs especially if there is no disk space. You can try a disk clean up and a Disk Defragmenter to free space on the system. Follow the steps mentioned below.

  Step 1:

  To determine how much space is available on the hard disk:

  1. click on Start and then click on computer , then point to the hard drive. The total capacity of the disk and free space will appear on a ToolTip.

  2. If you want to free up more space, use the disk cleanup and Disk Defragmenter utility.

  Step 2:

  Disk Cleanup lists all temporary files and unnecessary program that you can remove the file from the Internet cache. You can direct disk cleanup to delete some or all of these files and Disk Defragmenter will improve the performance of computers by aligning the files.

  Use disk cleanup

  1. click on Start , type disk cleanup in the Search box, and then click on Disk Cleanup in the programs list.

  Step 3:

  To use Disk Defragmenter

  1. click on Start , type disk cleanup in the Search box, and then click Disk Defragmenter in the programs list.

  For more information about Disk Defragmenter, see the following article in the KB942092 .

  Features of the Windows Vista hard disk defragmentation utility.
  http://support.Microsoft.com/kb/942092

  The following article will give a better understanding on how to improve the performance of computers.

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062

  After the methods mentioned above, you can update your computer.

  Hope this information is useful.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• bug in settings after update 4.2.2

  Hello guys, I have a bug in my Xperia L in the settings after update to Android 4.2.2
  The problem is in storage that I can't transfer data to the sd card. When I click it, it crashes with a message "Unfortunately the parameters have stopped."
  Any idea about it?

  arbz wrote:
  Hello guys, I have a bug in my Xperia L in the settings after update to Android 4.2.2
  The problem is in storage that I can't transfer data to the sd card. When I click it, it crashes with a message "Unfortunately the parameters have stopped."
  Any idea about it?

  Known issue.

  wait fix sony selection until this problem.

• Wireless connection disappeared after update wireless connection device

  Hi, I can't connect to any WiFi recently on my computer laptop so I did a little research on the internet and discovered that keep the device wireless to date is one of the solutions. But after I updated it my laptop have a bigger problem, my wireless connection is totally absent. Until it isn't "manage wireless connections" on the left side of the network and sharing Center , but has now disappeared, my "change adapter setting" to have a WiFi connection , but now also disappear. My laptop is Windows 7 and I have attached a screenshot here for your better understanding. I'm not an expert in computers, so please respond in detail as you can, thank you.

  

  

  

  

  

  Thanks PML and GTS-NJ for your good answer. I solved it by downloading the drivers the website of the manufacturer of my laptop's wireless and re - install all drivers wireless.

• Computer does not recognize the monitor after update of Win7.

  Computer does not recognize the monitor after update of Win7. Have a projector connected to the computer with the monitor; from clogging the last evening updates have been installed. When the computer has been restarted this morning the monitor is entered but did not detect a signal and fell asleep: do not get an image on the monitor or projector.  Suggestions?

  It is a laptop?

  And if you start in safe mode?

  Desktop

  Haven't tried safe mode
  Disconnected the projector, and then restarted; back to work now!

• My front camera not working after update to ios 9 (Iphone 5) Please help me to solve this

  Hello

  My front camera of the iphone 5 does not work after update to ios 9, please help?

  I have the same problem on my 5s.  Just after the upgrade to 9.3 camera is black.

  Work, rear camera, but the camera application usually freezes before let me pass.  Sometimes a warning icon yellow appear in enforcement camera, touch, he says the flash does not work for the unit to cool down.  No change after a restore is complete.  Other applications of the camera have the same problem.

  iPhone 5, iOs 9.3

• Camera problems of Smartphones from blackBerry after 8100 Firmware update to v4.5

  Hi all

  It is a known issue for me that I'm updating all the handsets of our work with the Blackberry firmware for the company that I work.

  After updating the firmware on multiple handsets to the latest version of the Blackberry 8100 4.5, there is a problem with the camera.

  When you are in display mode and the outside (even if covered) the screen turns white as if the lens opening is open wide.

  Even when you take the picture, the result is white all over.

  Please see examples here:

  http://www.imagedump.com/index.cgi?pick=get&TP=540100

  and

  http://www.imagedump.com/index.cgi?pick=get&TP=540101

  Two of these photos were taken inside with just on fluorescent lights.

  However if I return to the firmware to a lower level the problem no longer exists.

  I tried to change the settings for the White Balance on the handset and no matter what setting I put it on the same results occure.

  I was wondering if there is a patch or I have to wait the next release for a bug fix?

  Thank you for your help in advance.

  Gadget

  Updated the 4.5.0.55 combined software and the camera problem no longer exists.

  Can I get some laurels to solve the problem myself? Laughing out loud

  Gadget

• Why can't I open my camera with bridge after updating my Mac with Mac was last updated?

  After updating my Mac with the latest Mac updates, that bridge will not read my camera when it is connected even when I try to refresh the picture towards the bottom of the charger?

  Have you tried recommended workaround here Bridge and El Capitan ?

  ~ Assani

• After Update Camera Raw to 8.2.0.94 cannot be opened. NEF files

  After update my plugin raw camera today at 8.2.0.94, I can not open. Nikon NEF files, 7100

  I get the error "Could not complete your request because an unexpected end of file has been detected.".

  Photoshop CS 6, MacBook Pro OS 10.8.5

  This error usually, almost always points to an image file damaged or corrupted.

  If you have used the Nikon software to copy the files to your Mac, be advised that such software Nikon is infamous for having damaged files in the process.  Use the Mac Finder or, better, the bridge to download your images.

  A faulty card, a hard disk failing, a bad USB port or cable can also be the cause of damaged files.

  I've never seen or heard of this error message generated on a Mac by a bad installation of Camera Raw or something other than a file corrupted or damaged.

• On Win 7 after update itunes Error Message error 7 (Windows error 127) whenever I have start download iTunes

  On Win 7 after update itunes Error Message error 7 (Windows error 127) whenever I have start download iTunes

  HI MikeGeorgen,

  I understand that you have updated iTunes on your Windows 7 computer, but now you see an error when you try to open it. I know it's important to have iTunes working properly, so you can sync your device, so I'm happy to help you.

  Make sure that you logged in as an administrator on your computer, and that you have the latest Windows updates. Then check out the additional troubleshooting steps that are listed here:

  Remove and reinstall iTunes and the components of the software for Windows 7 and later versions

  Thank you for using communities Support from Apple. See you soon!

• after update, the Favorites have disappeared. There is no automatic backup in the last 2 months. under the restoration, it gives me the possibility to restore until today.

  all of a sudden I have no Favorites.

  I read to all bookmarks, clikc backup and restore, restore and it will list the last 10 backups. the only listed backup is starting today, and no bookmarks are added when I restore

  I also saw to look on the desk in the old firefox files... most recent automatic backup was 2 months ago... it's too old

  I can't find the latest bookmarks files

  If you haven't tried stopping and restarting Windows because this problem occurred, I would suggest trying it. Some users have reported a problem after the updates of Windows where they see only partial information in Firefox, perhaps because of a problem of privileges.

  After that, if the problem persists, I'll ask you to verify a parallel settings folder. You can open the settings file (AKA Firefox profile) current Firefox help

  • button "3-bar" menu > "?" button > troubleshooting information
  • (menu bar) Help > troubleshooting information
  • type or paste everything: in the address bar and press Enter

  In the first table of the page, click on the view file"" button. This should launch a new window that lists the various files and folders in Windows Explorer.

  Make a note of the name of the current folder in the Windows Explorer address bar, and then click the 'profiles' word that appears before him to navigate a level and see if you find other profile folders here. If you check the inside, a folder bookmarkbackups in other profiles appear to be current?

  IMPORTANT: Do not use Windows System Restore feature — which can cause loss permanent data.