Update Firmware of Bloggie then dies

Similar Questions

• Satellite A45: need to update firmware on DVR K12D drive

  Hello...
  IM new here... Well, I have a toshiba > Satellite A45 Series... which had a DVD Multi Drive (DVR K12D) inside. The problem is that his operation stopped. Sometimes she would write a CD then sometimes it spoils my CD. I used on the media player were Verbatin, Imation, Supermedium, Sony.

  Well the reader works as a very short period and then dies OFF... every time I took it to the repair center...

  The drive has been changed now 4times by toshiba support. I asked for the release of Firmware from 1.05 to 1.15 or higher. They keep answering back telling me to ask pioneer. But it is an OEM obvious by toshiba.

  The player after having been changed stops working without delay of 2 to 3 months max 4 months time and den customer tried upgrading the drive by putting a higher config recorder multi disc double tht is the 8 GB one. The satellite detects that hardware.

  been 2 years now my readers send me problems such as:

  does not read DVD
  doeant read CD RW
  don't write CD/DVDs
  sometimes DVD detects any sometimes they detect its weird.

  The only solution is to update the firmware, but how can I do? I need the update of the firmware. I called toshiba WE also, they talked for two hours and then answer that I have to contact pioneer!

  Please help me!

  Vik!

  Hello

  CD/DVD players support generally not all means.
  As far as I know in the manual you will find a list of the CDs and DVDs is supported and it works properly.

  In addition, it seems that this device was designed for an American market and in this case, you should look at the Toshiba Site us.

  I checked this American site:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_home.jsp

  There, I found several notebooks A45 and the necessary drivers. I also found a driver for DVD rom and ram. It s not a firmware update but maybe it helps.

  However, on Toshiba Europe site, I found several updates firmware for the readers and the different European books but as I said at the beginning you have a US laptop and have to look on the American website. If you don't get an update of the firmaware if you ask the manufacturing of the car.

  In addition, I want to say that you can not be sure that, after updating the firmware of the player will not work correctly. This kind of malfunction looks like a defect of lens calibration and therefore only a replacement disc can solve this problem.
  If the drive has been replaced several times so I guess that the guarantee is valid and you will get a new.

• Satellite Pro A300 PSAG9E - unable to update firmware

  It has come to my attention that my laptop will not install updates of the firmware.
  I tried all updates firmware on the Web from Toshiba site and on-site support for other countries but still no luck.

  My laptop is a series of Satellite Pro A300 PSAG9E and when I try and install a firmware update a box telling me it's not compatible with my system.
  I checked the version proposed by the pdf file and I know that it is the basic version before the update, and I'm sure I have install the correct way of m.
  So I don't know what goes wrong.

  Does anyone else have this problem or knows something that could solve this problem? Because I'm at a total loss.

  Thank you

  Hello

  The European driver Toshiba page provides three firmware updates;

  _UPDATE for drive_ TS-L632
  + Changes have been made in order to correct the following: +.
  + Impossible to burn songs on iTunes to some CD media. iTunes error "the attempt to burn a disc fialied. An unknown error occurred (2131)"is displayed. +

  _UPDATE for drive TS-L632P TO02_
  + This firmware solves some problems in the optical disc drive. +

  _UPDATE for TS-L632H drive TO03_
  + This firmware solves some problems in the optical disc drive. +

  You have a TS-L632P and TS-L632H drive?
  Isn't it? Then you cannot update the firmware.

• After updating Firmware, cannot access DDNS

  Two days ago, I consulted my router page (AC1450) and found a banner telling me that an update of the firmware (V1.0.0.34_10.0.16) was available, so I enabled it to happen.

  Since then, I am not able to access my computer remotely. In the advanced for DDNS page, he says that the update was two days ago. When I clicked update, it says that the username and password are incorrect.

  They are not wrong he was working before the update.

  I don't know what was the previous version, but I need to get this back to work.

  John

  After this announcement, I called Netgear support. My router is out of warranty, so it wasn't much that I could discuss with the representative outside to pay a tax of exhorbant for an answer. I was directed to the FAQ page for answers.

  Error on my part, and the lack of Netgear.

  First of all, I got the router back up and operational. Was my fault, I didn't make a backup of existing information. Lack of Netgear, it didn't ask me to do this, after I clicked on the balloon to upgrade the firmware of the router status page.

  If you are going to place a guest who is an update is available for a router, then Netgear must inform the end user that there are steps that need to happen, otherwise the data will be lost.

  I found myself without downgrading the firmware, download the firmware on Netgear, then upgrade to the latest version of the software package, then instill information from scratch in my router and I was able to communicate with my computer remotely through DDNS.

  Laserman

• Workstation HP Z240 tour: update Firmware for Z240

  Workstation HP Z240 Tower
  Product number: L8T12AV
  
  To update the Firmware, I provided this link by the customer support:
  
  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=8323794&swItemId=wk_158289_1&swEnvOid=419...
  
  Using the link, I was able to download and run sp74202.exe.
   
  A set of instructions then appear as follows:
   
  Another utility of FWUpdLcl.exe in the directory of Mee Flash\Local-Win is designed to update the ME firmware in an environment 32-bit or 64-bit Windows, the "Run" box or a command prompt. Her can be updated by running the following command: "FWUpdLcl.exe - f... \11001197.bin-generique. In addition, when you run a 64-bit Windows environment, use the command: "FWUpdLcl64.exe - f... \11001197.bin-generique. ME Flash contains the binary update image for use with the utility.  The binary image of the update and the content of the file room for both parties can be copied to any volume of storage available in the Windows operating system.
   
   
  Since I'm on 64-bit Windows 10 I guess I need to run the command: FWUpdLcl64.exe - f... \11001197.bin-generique
   
  My question is... How can I fill this order, that is, how know what folder to look at, to find the files.

  Many thanks for the advice.

  When you run HP service packs, they will enlarge and place their content under a clean directory in C:\swsetup.

  Specifically, in your case, if you are running sp74202.exe, you should see a new directory that c:\swsetup\sp74202 was created with the contents of the service pack to the breast.

  You can also use 7-zip to look inside the service pack exe without running from the exe is a zip file that runs the installation program once unzipped self-extracting

  In any case, is a more recent version update ME here , but first of all, I would apply the latest system firmware update available here.

  When looking at service pack HP above links, it is advisable to selectively click on each 'Description' and 'Improvements', 'Instructions of Installation' 'Release Notes' 'fixes' tabs 'History' and read the information (some of it is repetative, but you'll soon learn where to focus your attension).

  The content of these tabs contain important and relevant information on what has been improved, corrected, what system it is, how to install the update, etc. And if one SP installed previously is not listed in the tab 'historic' liberation may have been driven by HP due to certain behaviours fauly or another question!

  Attension pay including prerequisites in some cases of updates must be reinforced (is that you can always just apply later).

  And if you read these things boaring, tab Instructions of Installation of the firmware (BIOS) system would have given you a clue where the sp files are extended to the

  Have you tried simply enter the command (as shown) via a command prompt window and change the directory where the FWUpdLcl.exe file is located?

  Just keep in mind that sp74202 is the initial ME firmware release is nothing so sould update

  So best to apply the latest firmware system (BIOS), then the ME firmware, then maybe later ME software (under chipset drivers).

  Better to mark this page that lists all downloads for your 64-bit of Windows 10 z240 Tower system then see him regularly.

• Update firmware CM1415

  Update firmware CM1415 malfunctions. (CM1410 MFP series FW Update 20120629)

  After a few minutes the wireless connection is lost.

  I use e-print, or fax function, the same thing happens. Lost wireless connection.

  Not possible to use ePrint settings.

  'Lost' mode it is not possible to print reports, etc.

  If I turn on and turn on the printer it works for a few minutes, then returns to the error state.

  Where can I find more old firmware to reverse and to have a functional printer?

  Thanks for your tip!

  While preparing for the partial resetting, I found under network settings > reset to the standard network settings.

   

  
  After that I've reconfigured the network and now it seems stable. I see that it stays on if I do the reset.

  Thank you.

• WAG160N - cannot update firmware de.09

  I downloaded the updated firmware (A Anex).15 but no matter what I try, I can't firmware to stick.

  (1) I tried the Firmware Upgrade option via the HTML interface to the router. I select the file (WAG160Nv1-EU-ANNEXA-ETSI-1.00.15-code.img) and click on the upgrade button. It seems to be loading the file in, counting to height of the percentage until it got to 100%, then the screen seems to be messed up. I turn off the router for 30 seconds and then on again, but it remains as version.09. I also tried the reset button for 30 seconds and then turn off now. No diff.

  (2) have also tried the TFTP.exe program without success, because it cannot connect to the server as it is said that there is no reply from her.

  I have screenshots if anyone is interested.

  I am at a loss. Certainly not a local help available by phone. Must have stuck to DLink - at least you can call.

  Does anyone have a similar experience? A way around it?

  (And reason for wanting to upgrade est.09 keeps giving up DSL connection and Wireless disappears.)

  -MARK

  Have you tried to update the firmware of your router to the other computer? Before you try to update the firmware of your router, turn off the firewall and Antivirus on your computer?

• Unable to update firmware Laserjet CM1415fnw

  Hello

  I tried several times to update the firmware on my printer HP LaserJet CM1415fnw.  I get the happy face after the utility.

  The Firmware datecode remains to 20111215 even after I use the utility to update the firmware in the 20120629 date.

  The PC that I use is Windows 7 64-bit OS.  (I tried 3 different PC with the same result.)

  This who can I try to fix this?

  Thank you

  Hi Wamer_ca,

  From the control panel:

  1. tap on settings

  2. press on Service

  3. press on the RFU.

  4. highlight on, then press ENTER to set.

  Try to update the firmware again and let me know what happens?

  Installation instructions

  Flash Firmware Update Notes:
  The firmware update utility uses the network or a USB connection to the printer.

  • HP Color LaserJet Professional CM1415 MFP series printer driver software must be installed before using this utility.
  • The HP Color LaserJet Professional CM1415 MFP printer must be on and in a READY State, as indicated by the LCD screen of the control panel and remain under tension during the process of updating entire firmware.
  • 1415fn HP LaserJet Pro printer MFP series CM color must be connected and able to print documents from the computer.
  • The RFU on the control panel (Service-> RFU) must be set to 'ON'
  • Depending on the speed of your PC processor, the firmware update process may end on the printer before the end of the progress bar to update status in the utility to update firmware flash on the screen of the PC, it's normal.
  • Once the update process has started, do not use your PC for other activity, until the process is complete.
  • Do not power cycle the product or the computer until the firmware update process.

    Process:
    1 download the update firmware from HP.com flash on your desktop.
    2. turn the printer power off and then back to the main printer clear memory.
    3. make sure that the RFU on the control panel (Service-> RFU) is set to 'ON'.
    4. double-click on the file of the firmware flash update utility. It will open a window of the HP firmware update.
    5. Select the correct driver from the HP CM1415 MFP series in the dialogue window. If you have assigned a different name for the HP CM1415MFP, choose the name that represents the correct printer. 6. click "send the Firmware" when you are ready to move forward.
    7. the progress bar will start to move to the right indicating the transferred information.
    8 power cycle are NOT the product or the computer that during this process or the product may become unstable and or unusable without further attention of HP. The firmware flash update can take up to 5 minutes to complete. Please be patient.
    9 in the flash firmware update product, display on the product control panel will display "Print Document - delete - programming - complete - Hewlett-Packard - loans - initialization - Ready". Once the download is complete, the printer is in the ready state.
    10. at the end of the update of the firmware, the dialog window displays a smiley face. Click exit.
    11. the firmware flash update process is complete.

  12. If you want to check the update, use the menu of reports under Setup Control Panel to print a configuration report. The configuration report displays the current firmware revision in the block of product information. If the firmware datecode don't change, check the setting of the RFU in the Service from the control panel Menu - it must be 'ON' for a successful update.

• Update firmware on Dell Powerconnect 6248P battery

  Hello

  I need to update the firmware on the switches on my stack, the stack consists of 3 all current 6248P to run version firmware 3.2.1.3 Powerconnect switches.

  I plan to stack in a 4 switch that is running 3.3.1.10 so I need to update my existing carpet before doing this.

  I would like to use auto update and upgrade the firmware on the circuit breaker that will modernize, then the rest of the stack, but the issue I'm having, it's that the documentation Dell tells me to enable synchronization of the firmware using the command "start auto-copie-sw" in the cli, however appears not to exist at all?

  Can someone advise?

  Thank you

  Steve

  The documents listed here.

  www.Dell.com/.../pwcnt_stacking_switches.pdf

  Is a little outdated. Therefore, the listed order is more part of the 6200/CLI firmware. By default, the switch will try and push any updated firmware for the other switches in the stack, no need to run a command.

  See you soon.

• Unable to update firmware DRAC6 past 1.10.13 on R610

  Hello

  I have a number of R610s I need to upgrade the DRAC firmware, so you can talk to our new management system. Most of them updated correctly when I left versions gradually 1.10.13 (their version) to 1.97.

  About 7 of them, however, will not move past 1.10.13. I have the version of the 1.11 firmware available via TFTP; When I try to install this (via idracadm, starting from the local operating system or a separate box or through the administrative SSH console) I get first "Firmware update is not current" then 'Firmware update operation failed' when subsequent attempts until I have make a racreset. I tried clearing space by removing the logs of the system, I have done a factory reset, drained flea power and the problem persists.

  I also tried to update from the Dell Repository Manager bootable media as shown here http://lonesysadmin.net/2011/03/07/the-easiest-way-to-update-a-dell-servers-firmware/. No joy.

  Finally I tried the update to a new installation of CentOS; the upgrade appears to start but is never-ending; fwupdate s presents 'The Firmware update Operation failed'.

  Is there any other approach, or y at - it logs I can check what goes wrong?

  Thank you!

  ClintonF_Dell,

  The first things that I would look into what version of BIOS and the lifecycle of the R610 controller run. If you do not update those in tandem with iDrac you may encounter problems of this kind. If they're behind then I test this on one of them and get the BIOS and the LC caught up and see if after a racadm racreset and NVram clear as the iDrac allows you to update.

  Also, have you tried to update the iDrac tab to update the iDrac with the firming.d6 file? To do this, for example, you download the iDRAC6_1.97_A00_FW_IMG.exe file and run it on a Windows system to extract the files, then find the file firming.d6 and save. Use it in the iDrac GUI tab updated. Now, I know that it is the current file name, so to keep walking until you need the 1.11 and so on.

  These are the current versions, if you are far behind in these institutions, I recommend walk them up as well.

  BIOS 6.4 - http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=C6MRW&fileId=3287843619&osCode=RH60&productCode=poweredge-r610&languageCode=EN&categoryId=BI

  Lifecycle controller 1.6.5- http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=F7XJ1&fileId=3364056173&osCode=RH60&productCode=poweredge-r610&languageCode=EN&categoryId=SV

  Let me know what you see.

• BlackBerry Smartphones Blackberry curve 8520 white goin guard then dies?

  Suddenly, my bb 8520 curve goes white then dies even if he is charged at 100%? I got new battery but still does it? So, it may be the battery?

  Hello and welcome to the community!

  I recommend that you try to start safe mode:

  • KB17877 How to start a smartphone BlackBerry in Mode safe

  It will take several attempts to get the combination of keys ESC (press/release/hold) OK, so be patient. When properly in Safe Mode, see what happens.

  If the behavior continues, then well... think what happened just before this behavior started? A new application? An update? A theme? Something else? Think carefully that the slightest change can be causal... and try to undo all that was.

  But if the behavior continues mode without failure, you may need to consider more drastic measures - WIPE, OS Reload, BBSAK Wipe/Reload and the process of reloading OS 'skeleton '. To prepare, you should be sure that you have a full backup of your PC... Please see the Backup link in my sig auto on this post for instructions.

  You may also use these tips:

  • KB10144 How to force detect the BlackBerry smartphone using the Application Loader
  • KB27956 How to recover a BlackBerry smartphone from any State
  • http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry

  Good luck and let us know!

• Update firmware H730 on ESXi

  We have two R530 running ESXi 5.5. They run slightly updated firmware on controllers RAID minis H730 I would like to update.

  The problem is the firmware update files I can find are if you are on Windows or Linux. How do I the R530 firmware update if I run ESXi? I am aware of the image of Dell SUU, but it's more than 10 GB is size, which is much too big, even for a DVD double layer.

  Dell do not seem to offer a "hard drive" version of the firmware from what I see.

  tonybarrett in your case, you can start in the LCC (Life Cycle controller) to perform updates to the server.

  1.demarrez Lifecycle Controller: press within 10 seconds after the Dell logo appears.
  2Click on Firmware update and update Firmware of the launch.
  The select the update repository page appears.
  3Select FTP server as source location and then click Next.
  The enter access details page.
  4 in the address box, type the host or IP address of the FTP server name, and then click Next.
  Server FTP from Dell (ftp.dell.com)
  5The latest firmware is downloaded from Dell's FTP server, internal FTP server or FTP server of the service provider.
  The select updates page appears. For a component, compare the currently installed firmware version and the latest version in the current and available column.
  6Choisir the required components.
  7Click applies.
  Once the update process is complete, the system restarts.

• Update firmware is defective

  On the ePrint centre, there is a red exclamation mark next to my color Laserjet Pro CP1525nw printer, indicating that he needs a firmware update. But when I try to install the firmware software, a message indicates that there is no updated firmware for this printer. A fix is required on the end of HP.

  If your ePrint works, then you don't need an update of the firmware. The problem is that it will show this red exclamation on the ePrint center site all laser printers to spray even if she didn't need an update of the firmware. When you have clicked on the link to the HP site and it would not allow you to update it's because you have the version more up-to-date. Sorry for the inconvience of the exclamation point still be there. You were all right. You can ignore that.

• Update firmware HBA Qlogic? Or delivered with the driver?

  I'm about to start resettlement of esxi clusters 5.1 to 5.5. By doing this, I get all the updated firmware. We are System X IBM has a pretty good bundler of everything. The only exception is for 2562 Qlogic which was an optional update. I'm bios 3.2 and 5.1 firmware. BIOS newer is 3.24 and I do not have any fixed revolutionary. I can't find any information on the newest firmware, so I decided to update anyway when I came across this link, which says that there is no need to update the firmware on the Qlogic HBA, the pilots themselves?

  http://blogs.VMware.com/vSphere/2013/02/QLogic-HBA-firmware-versions.html

  Can someone explain is more in detail for me and is it true?

  I can confirm it has packaged, too.

  Before installing ESXi 5.1, I've updated firmware to 7.0 manually. Once ESXi is installed, I found firmware has been downgraded to 5.0 that comes with the driver of stock. Then I updated the driver, firmware has been updated to 7.0 again.

• Cannot update firmware Officejet 6500 has more

  I just receivevd my new Officejet 6500 a Plus (e710n-z).  The status page shows a f/w Rev. CIP1FN1110AR.  I did a search for updates on the printer itself and he says it's not.  I went to the 6500 a Plus page Web on HP.com and find f/w CIP1FN1126AR (OJ6500_E710n - z_R1126A.exe).  It is obviously a most recent version, right?  So I download it, then run it.  It works very well and even detect my printer.  However, the printer is gray and under STATUS does not say there is.

  Can anyone help with this?

  Thank you!

  Sea

  I am employed by HP

  If my post helped you... click on the LAURELS on the left to say thank YOU! ***

  I DID IT!  I finally got the updated firmware update!  Gotta think sometimes off the beaten path!  I am a technician in field HP and normally we cannot simply click one. EXE firmware update.  Then that which made me think to extract the. EXE (see previous post).  Then I thought about the update via USB, in the same way that we do it not connected to network Laserjet printers and it worked!

  So what you have to do is extract the file update package .ful (OJ6500_E710n - z_R1206A.exe), I used 7zip for this.  Then rename it and place it in the root of C: I just renamed mine fw.ful, short and sweet.

  Then you need to share the printer, use a name that is short and sweet.  I called mine Officejet.

  Then I went to a command prompt (not sure if it was necessary, but only in the case) and copied the firmware file.  Here is the command that I used

  copy/b c:\fw.ful \\your computername\printer sharename

  My printer works now the firmware version 1206!  Not sure why it wouldn't run and update you want to its supposed to but at least now we have a way to do it.  I hope everyone can get what goes on their printer.