After updates on Nov.11 button starts everything seems different.

Similar Questions

• Satellite Pro A300 (PSAG9E) - after updating BIOS Windows will not start

  Restart went well after update BIOS and Windows XP logo appears loads for a few seconds then a beep and restart - last good known or start Windows normally same effect.
  Reboot back to start - this is a new laptop - using the BIOS of Toshiba s official download site.

  Quite annoyed to try to find a way to upgrade or downgrade the BIOS.
  Took battery and RAM to see if I can delete it?

  Any ideas anyone?

  I think you mean BIOS * update * and do not upgrade ;)
  An upgrade is not possible

  However, you can try to remove the battery and the AC adapter and wait an hour. After that, reconnect the battery and the AC adapter and try to start Windows.
  Moreover I would load the default settings in the BIOS before starting Windows.

  If it doesn't work, it seems that your ROM module needs to be reflashed. In this case an ASP can help you.

• >: everyone is having the same problem with all the days that I have now with the update on thursda after update, it could not be started "could not find xpcom" restored Dáil

  with the update of daily Thursday (Australia) after update owned couldn't boot received message "could not find xpcom.
  I then restored by day sauvegardΘ installed upgrading again every day would not restart with the same message
  I tried again on Saturday you have the same problem
  I'm now ignoring the update message that is very annoying because he wants me to update daily

  The bug in question should be solved with a daily update of today. However, I agree with the recommendation to go with 31.0 once it comes out next Tuesday, or at least to use the beta versions (once per cycle) as a compromise between stability and get the latest features and updates to the platform.

• Re: Satellite P100 - after update BIOS it does not start optical drive

  I have updated the BIOS to 4.70 in my P100 PSPAAE. After restarting, I expect about 10 minutes, but nothing has happened, after that the screen of the BIOS, the screen went black. I turned off the laptop only.

  I chose the option "start windows normally". Since (I assume) the laptop does not drive. Any, I have to start from there. Everything else works fine.

  It is because of the update of the BIOS, or something else could cause this problem? Any idea or help appreciated!

  Hello

  The optical drive is recognized from the BIOS?
  You can read the disc in Windows?

  Maybe you should load the default settings in the BIOS and try another bootable disk.

• T440S corrupted after update solution center, no menu start

  My T440S has corrupt files and the various problems which all seem to have started (maybe) an update of the lenovo Solution Center. I have Windows 8.1, model number 20AQ-CTO1WW. Problems:-"Windows Start menu" anything when you click it doesn't. -You try to start the solution Center Gets error "this application requires a version of adobe air, which can not be found. -Try to update or reinstall adobe air gets the same error shown above. -Try to uninstall adobe air gets the same error shown above. -I can't begin to interface user of Norton Internet Security. I tried to go back to a repair system point before all this began, and the return seems to work, except that the problems are all still there. I tried to reinstall the solution Center, downloaded 2.4.003, page load version low said that t440s is taken in charge. However, when I try to install it, I get the error "this version of lenovo Solution Center program can only be installed on select lenovo computers. This installation cannot continue. "I can't find a download of 2.4.002 on the lenovo site. I can't start the user interface for the solution Center, I get the error of adobe air. I ran sfc/scannow and got the "Windows Resource Protection found corrupt files but could not solve some of them." I see several files in the log that must be replaced, but I don't know how to replace them. I don't have a win 8.1 installation media. And when I try to create the recovery partition recovery media, I get an error that the file is missing (or something like that, I'm sorry, could not capture the exact error). so... suggestions welcome! I'm not positive all started with the update of the solution Center, but it's my best guess. Thank you!

  Just to conclude this, I have my system working again. If it actually occurred during the update of the solution center or not, I can't be sure, but what it, caused repeated error saw afterwards was "the application could not start correctly (0xc0000142)", listed in a dialog box, for many applications (when I tried to get the start menu, when I tried to run some applications (but not others) When I tried to install something new. The steps that finally cleared up things were:

  ran-a ' sfc/scannow' in a guest of administration. SFC found errors, but could not fix them.

  -Ran chkdsk, some disk errors were found and corrected.

  ran-a ' sfc/scannow' in an administration invites once again, same error still there, could not be repaired.

  -ran "Dism/Cleanup-Image /ScanHealth Online" in a prompt administrative., he finds errors and said they were repairable.

  -ran "Dism/Cleanup-Image /RestoreHealth Online" in a prompt administrative., he says he is able to repair the windows image. However, problems still occur.

  -run "sfc/scannow" in a guest of administration, and this time, it was able to repair the corrupted files. And after that, everything works again.

  Here is the info on the microsoft System File Checker: http://support.microsoft.com/kb/929833

  Here is an article on the help of DISM to repair a windows image: http://technet.microsoft.com/en-us/library/hh824869.aspx

• Satellite A500-13W - after update BIOS the FN buttons do not work

  Yesterday I updated my Bios of my laptop to 1.50. After that the FN buttons no longer works. Can someone help me? ^ ^

  Sorry for my bad English

  Hello

  You have installed the correct version of the BIOS of your laptop?

  Features of FN buttons are normally not depending on the version of the BIOS. So, you need Toshiba value added Package and utility tools to Support Flash Cards. Then I recommend to reinstall two of them.

  You can download it here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Remove all older versions first. Reboot then install VAP and finally Flash Cards Support utility.

• Satellite U500 - 11 c - after updating Win7, the eco button no longer works

  Hello

  Recently I upgraded my OS from Win Vista 32 bit to Win 7 32 bit with the TOSHIBA DVD and since then, the eco button no longer works.

  When I press on it, the laptop is not set the eco mode.

  Does anyone have the solution for that, please?

  Hello

  I'm a little confused about your ad m...
  You wrote this eco mode works well but if you press the button it doesn t switch?

  However, as the written Timox try reinstalling the Eco utility * and * value-added package. The two you can find here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

• Alienware 14, fan only runs on start & everything seems to be fine

  I just upgraded the i5 CPU 4200 m to i7-4700mq myself. It starts fine, but after about 10 min running windows I noticed that the fan does not turn.

  I restarted to check and noticed only towers for about half a second to start, stops completely when it reaches the bios menu at the head of alien.

  Then I turned it off and start looking for solutions, won't damage the CPU...

  What seems to be the problem?

  Hello!

  HWmonitor allows to control the fan and CPU temperatures. Try to re - install the control centre Alienware and updated to latest BIOS A09.

  If the problem persists, run an ePSA Diagnostics to check for hardware errors.

• zBook 14 - cannot change the resolution of the screen after update

  After I installed software updates the portable suggested to me, my screen resolution went suddenly from 1900 x 1200 at 1200 x 720 after reboot and it won't let me change it, not even to a lower resolution. I'm very frustrated, because I need the computer week next for visualization work and I really need the screen works well.
  
  It doesn't let me change the resolution. Graphics and display drivers are up-to-date and functioning according to Device Manager. I did a system restore, but that just do everything worse although the resolution worked once again thing, I had to run a repair of the start several times before that my laptop would be starting another property again. This does not resolve the issue, given that the display drivers are not working properly (videos have been viewed very badly) and even after updating the computer won't start again, so I had made another system of recovery and now I'm to the point where I can not change the resolution and starting to be really frustrating. Also, (if it even starts) Windows is constantly freezing, forcing me to hard reboot.

  Thanks for any help, that all the world can offer.

  This looks like a lot of problems, you have there.
  
  First thing I would say is to do a check of the basic material. Your laptop will be built Diagnostics the F2 button on the HP logo. The hard drive on a test extended (approximately 45 minutes - 2 hours) and the memory test. If these two go, consider downloading of UEFI diagnoses from the above drivers download section. In all honestly, I think this unnecessary step for most, it tells not usually defects that are already not obvious. But he should have a graphics test, if it will throw a failure even if it is faulty is another matter but when even, of a value of a test.
  If all else fails, download on the phone for the HP warranty.
  
  If anything fails, run the memory on memtest86 + for about 12 to 24 hours. Download you, it's free, burn it to a cd and the start of it. And it works simply, in case of error, you have a fault memory.
  
  If anything fails on any diags, then nothing is most likely false, cool reimageries windows probably will solve the problem and its probably just a form of spyware or corruption of driver or something. Backup your data, reinstall a new copy of windows.
  
  But in my experience, from doubtful, repairs etc... freezing randomly and other problems are often a sign of a failing hard drive. And diagnostic tests are not always 100% to pick up a failing drive. For the most part, but not always. So, if its still high reading after a reimage, review the reader always a potential source of the problem.
  
  To the extent where it won't let you change the resolution? What you mean? As for the option is grayed out? Can you maybe post a screenshot and a screenshot of your device with the extended graphics card Manager.

• Inspiron 15R SE 7520 video card does not work after update Windows 8.1

  The internal graphics are Intel HD 4000 and the graphics card is a Radeon HD M 7730. After update for Windows 8.1 almost everything worked, except that it only uses the integrated Intel graphics card. Now, the resolution is not right and parts of the interface Windows look rather mediocre in comparison.

  What I tried:

  • Uninstalling the video card drivers
  • Reinstall the drivers for the video card in Dell
  • Install the latest beta drivers directly on the AMD website
  • Disabling the integrated Intel graphics card
  • Uninstall the Intel integrated graphics card

  So now what?

  Hi all

  After a lot of Googling, got this Dell website which has 8.1 Windows drivers for Inspiron 15R 7520 SE:

  http://FTP.Dell.com/published/pages/Inspiron-15R-se-7520.html#TopSolutions

  After having installed the drivers from AMD & Intel HD4000 for Win8.1 on the site above, blurry of the screen disappeared and catalyst works again!

  Please spread this link autour!  Very weird representatives Dell did not provide this link. Their advice to uninstall drivers / stop windows update does not help.

• Lost minimize, maximize and close buttons after update to 8.1 windows

  Today, after updating my windows 8.1 PC, I noticed him minimize, maximize and close buttons disappeared from my browser. It is an empty box of blue in the upper right now, with no functionality. How can I get my back buttons?

  Hello
  Thank you for your suggestions.
  Fortunately, just after I started this thread the problem magically itself. The problem could be the style - add on. I've changed the style several times to try to resolve this problem, because I noticed that my custom style disappeared as well, and after that the icons reappear.
  Problem solved!

• Whenever I update on FireFox from the start. I have never "Firefix" icon/button top left which is described in all the GET started video instructions.

  When you browse videos "Get menu started", they point to a firefox icon/button at the top left of the screen. They use this button for a menu to synchronize dropdown using private browsing and so on. It never is. What should I do to put the question on the screen?

  You will see the Firefox button if the menu bar is hidden (view > toolbars or Firefox > Options).

  See:

  • https://support.Mozilla.com/kb/how-do-i-get-Firefox-button
  • https://support.Mozilla.com/kb/common-questions-after-updating-Firefox

• After you run the 2011-12-15 updates, Windows Firewall does not start.

  I have my computer set up to run automatically updates. After the last set of updates, I am unable to start Windows Firewall by all means. Service, Mpssvc has an error message "cannot read the description: error code 15100" when I check it in the Services window. I am running Vista Home Premium 64-bit with Service Pack 2 installed.

  I ran the Microsoft Fixit for firewall services and received the message that "Windows Firewall service is not running or is not started. The Fixit was not able to start the firewall and Mpssvc.

  Hello

  -What updates caused the problem to occur?

   
  Updated version has a problem in the history of the update.
   
  a. open Windows Update by clicking on the button start. In the search box, type Update, and then in the list of results, click Windows Update.
  (b) in the left pane, click view update history.
  c. to display more information about an update, double-click it.
   

  Follow these methods and see if the problem still occurs.

  Method 1:

  Do SFC scan and check if the problem is related to the integrity of system files.

  Method 2:

  Do System Restore to the point that your computer worked very well and install updates manually ensuring that do not install the problem causing the update unless it says 'important update '.

• my windows vista starts normally until I have pass the user coice screene. After that, I see the cursor but everything is black. What should I do? Thank you very much!

  my windows vista starts normally until I have pass the user coice screene. After that, I see the cursor but everything is black. What should I do?

  It was probably caused by the removal of any file system as I was scaning the pc for malware and probably deleted some important file. only safe mode works now
  and I need my computer quite urgent for the University.
  Thank you very much!

  Hello

  No saving necessary data and re-installing Windows Vista might be the best option, but here
  are a few others.

  You can save your files by putting the drive in another computer as a 2nd disk (best) or external
  Drive USB enclosure and then backup to removable media such as CD, DVD or other USB drives.
  Of course a real store of the computer or the manufacturer of your system can help to recover the files.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  --------------------------------------------------------------

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  A method to try to get to the desktop (try in normal Windows Mode without failure) is CTRL +.
  ALT + DELETE - Manager tasks and tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - and then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is available by
  repeatedly tapping F8 as you start. CTRL + SHIFT + ESC also begins the Task Manager.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
  system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (a line type or copy and paste one line at a time and hit enter - enter a bracket)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)

  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• SW2 does not start after update

  Hope someone can help.

  I've updated my SW2 yesterday and everything seemed fine, but now when it connected to my phone the SW2 kept rebooting.

  I tried to turn it off, and now it does not start at all I just get 5 vertical bars on the screen. She is completely loaded and not recognized by the PC.

  I tried pressing the power button for at least 30 seconds - the SW2 turns but will not start when turned back on. I tried to relight both plugged and unplugged the computer with my phone is totally turned off so no possibility of what he's trying to connect to my phone while commissioning.

  Finally, everything seems to be ok atm.

  Steps to solve were

  -Disable the twinning of the phone (this allows the watch start)

  -Reset the settings of the watch watch

  -Uninstall sw2 connect app on phone

  -Restart the phone

  -Re-install smartwatch 2 SW2 on play store

  -Reconnect phone watch

  If you are still having problems uninstalling repeat but uninstall the applications that connect to the watch as well as the removal of the sw2 connect app