Re: Satellite P100 - after update BIOS it does not start optical drive

Similar Questions

• Satellite Pro A300 (PSAG9E) - after updating BIOS Windows will not start

  Restart went well after update BIOS and Windows XP logo appears loads for a few seconds then a beep and restart - last good known or start Windows normally same effect.
  Reboot back to start - this is a new laptop - using the BIOS of Toshiba s official download site.

  Quite annoyed to try to find a way to upgrade or downgrade the BIOS.
  Took battery and RAM to see if I can delete it?

  Any ideas anyone?

  I think you mean BIOS * update * and do not upgrade ;)
  An upgrade is not possible

  However, you can try to remove the battery and the AC adapter and wait an hour. After that, reconnect the battery and the AC adapter and try to start Windows.
  Moreover I would load the default settings in the BIOS before starting Windows.

  If it doesn't work, it seems that your ROM module needs to be reflashed. In this case an ASP can help you.

• Qosmio F50 - after update BIOS Bluetooth does not work anymore

  I need to update BIOS and F50 v 2.20.

  After update Bluetooth stopped working. Bluetooth in the taskbar icon turned red and I couldn't use any bluetooth device. I got my comp. 3 times to factory State, nothing has changed. After that I uninstalled the bluetooth stack, when I re install the installation crashes and now there is no icon in the taskbar and no link in Control Panel.
  I've tried everything.

  Need some professional help. My computer is only 2 months old.
  I am very angry.

  There is a new version of battery available Bluetooth.
  http://APS2.toshiba-tro.de/Bluetooth/?page=download

  But before install you it I recommend to remove the old battery installation BT.
  After removing the battery of BT, reboot the laptop and follow the BT facility.

  Installation should finish correctly and then you can activate using the FN + F8 keys.

  Should work.

• What can I do to correct premierepro CS5.5 after win 7 to win 10 update? It does not start.

  What can I do to correct premierepro CS5.5 after win 7 to win 10 update? It does not start.

  An idea that MAY work to install or run some programs in Windows old 10

  -read what to do in https://forums.adobe.com/thread/1945740

• Re: Satellite Pro L300 - update after the BIOS, Windows will not start

  Hello

  I updated the BIOS on my laptop to the latest version and now it does not start in Windows. I can get to the BIOS menu. I tried to restore the default values and saved the day, but he's just a blue screen with writing on whichIi do not have the time to read it before it tries to restart and continues to do the same.

  Any ideas anyone?

  see you soon
  Phil

  Hi chaospunx,

  Which HDD mode did you use before the BIOS update? Perhaps this option, you need to change, then Windows will start up again.

  You can choose between the mode of access AHCI and Compatible HARD disk.
  Check this box!

• Satellite L50 - after Win10 touchpad upgrade does not

  Brand-new Satellite L50-C03E laptop pad touch does not work. Upgrade to Windows 10. Tried using all combinations of F5, FN & F5, don't hit to swipe and checking settings and nothing works.

  I guess you can use external USB mouse.
  Connect it to the laptop and uninstall the old touchpad software / driver for Windows 10 system. You should find it in Control Panel → programs and features.

  After the the touchpad driver has been removed, restart the laptop and win 10 updates.

  It would be very interesting to know if this solution allows you to get the touchpad working again.

• Satellite C55 - Has - 1 L 0 does not start in Windows 8

  Hey guys.
  I hope you can help me a bit.
  I have a Toshiba Satellite C55 - has - 1 L 0 here and it does not start in Windows 8.

  I turn it on, the Toshiba start screen appears, and then I get a message on a black screen saying "media control" (failure) and after a little while "no boot device. Please restart.

  I checked the BiOS and it does not see the hard drive (said HARD drive - no) and even in the boot order list, I don't get a list with the DVD drive with the exact name, but for the HARD drive.
  I tried to do a recocery with the F12 key and get the list to choosw where I want to start but by selecting the disk hard does not work.

  So I thought I'd try a live distribution of linux to see where is my hard drive and back up my data (after some settings in the BIOS - boot CMS mode) but I can't find there too. (I have a file fstab and mtab, it would help if I posted it here?)
  Is my HARD drive broken? Can I try something else?

  Thank you very much!

  You are right. This issue should be fixed by the authorized service provider.
  Furthermore, why do some risk steps to check this problem, if the warranty is valid.
  Warranty will cover the repair costs.

  Addresses and phone numbers, you can find on http://www.toshiba.eu/innovation/generic/ASP_SUPPORT/

  Good luck.

• It seems that there are updates but AppStore does not start

  It seems there are updated but does not start AppStore. Someone at - it an idea how to solve this problem. My iMac restart does not solve the problem.

  I am running OS X El Capitan 10.11.4

  THX in advance

  Select the text below, go to the Safari menu > Services > reveal in Finder.

  ~/Library/preferences/com. Apple.AppStore.plist

  Remove the "com.apple.appstore.plist" file and then restart your Mac and try again.

• Satellite P500 - after update BIOS on the numeric keypad does not work anymore

  I just had a Satellite P500 and am running Windows 7. I downloaded all the latest drivers and updated the system BIOS to version 1.70 (from Toshiba support website). Now, my numeric keypad of the keyboard does not work.

  The NumLock light is on and when I hit the key "6" on the pavement, he turns the power light, but the behavior of the other keys does not change that it is on or off. The '-' key to enter a '6', but none of the other keys (except "enter" does nothing.

  I removed the keyboard driver and rebooted to reinstall the keyboard driver, but has no effect. The keyboard has worked for a few days after that I flashed the bios but seems to have stopped since I started using a USB mouse. I tried to uninstall the USB mouse driver, but who have nothing do either (it was a Logitech driver).

  Anyone have any ideas? Thanks in advance

  > I did not upgrade bios 1.7
  Maybe you should try upgrading the BIOS
  As another user has suggested upgrading the BIOS 1.7 helped, even if the end user has updated the BIOS twice

• Satellite A300 - after update BIOS black screen

  Hi all
  I just applied the update to the BIOS on my Satellite A300. After the update is successful, the system carries out a restart. Now when I try to start it I get no display, I can hear the proceedings to hear it, the CD player, the DVD, playback led flashes.

  The ASP Toshiba rang me (phone call), the motherboard must be replaced after a bios update, but it is very expensive for me :(
  Please can you tell me if they are a way to fix it without replacing the motherboard? The bios is an Insyde and according to the site Internet the bios bios [recovery technology | http://www.insydesw.com/press/2008/press_060308.htm]. I guess that the ASP does not know that.

  Please can you tell me how to start the recovery procedure it is possible (combination?),.
  Any help on fixing the laptop without replacing the motherboard will be much appreciated.

  Hello!

  I think that the ASP is just and in the worst cases, the motherboard should be replaced.

  You can try to remove the battery and the AC adapter. Wait one hour and then connect the AC adapter and the battery and try again.

  If it doesn't work you should go to an ASP. Perhaps a BIOS reset can solve the problem, but it can be done from an ASP.

  Good bye

• After update BIOS USB Ports not recognized on Satellite L500

  Hello!

  After a BIOS update to 2.1, two of my three USB Ports no longer work. Is it possible to downgrade to the previous BIOS? Or what else could cause this problem?

  The system is a Satellite L500 - 153 (PSJ3E)

  Post edited by: koocho

  Go to Device Manager.
  Remove all USB hubs and USB controllers in the list of devices.
  Restart the computer and wait for Win has recognized and installed again all USB devices.
  Then test the USB feature.

• Satellite A80-135 PSA80: after updating Bios keyboard will not

  SATELLITE A80 - 135 MS (MS is for Spanish)?
  model PSA80E-04C00JSP
  SER 55XXXXXXK

  Windows xp sp3 Spanish

  -> Update of the riginal 1.5_ bios (bios ID EAT10 / EAT20 bios version: v1.50)
  for _v 2.8_

  Downloaded bios - 20070709170816.zip of the Spain of toshiba
  http://es.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp?service=es

  Unzipped the file and found an excutable "windows installation" and "AT10280a.rom".
  Double-click on the installer and...

  .... Now the keyboard is used for nothing (strange signs instead of letters)

  During the update (windows xp) I think I saw something on a master (original rom backup) in c:/windows/temp
  but now I can't find the backup rom.

  Can anyone help?
  Would it be possible to 'downgrade' to the bios (1.5) original and if so... where can I find it?

  Thank you

  Hello

  I don t know why it happened after updating the BIOS, but I guess that the language of the keyboard settings are not correct.

  Go to Control Panel-> Regional Options & language-> language (second tab)-> Details

  Here, you must choose the right keyboard (Spanish) language?

  Good bye

• Satellite 5205 - after updating Bios - repairman / message call Bios

  Toshiba 5205 - repairman / call Bios - need help.

  I flashed my bio and the laptop locked in windows and not extinguished after the flash.

  Now when I turn on the laptop, I have no picture and the front of the laptop has a LCD remote that says: technician / call the BIOS.

  I already disassembled the laptop battery and let sit a day full to the bios killthe, but I get the same error and still no picture.

  How can I fix? The bio should be dead by now. Am just using CA power supply for power. I tried to connect the battery in and I also put battery back in. bio and I get the samething on the remote lcd display error message.

  There must be a way to work around this problem, if anyone knows please let me know.

  Hi Jim,.

  Unfortunately the battery will not reset your BIOS. The BIOS is maintained by a battery on your motherboard (CMOS or RTC battery) and you will need to disassemble your laptop to access the battery. Even remove the battery CMOS does not restore your BIOS, since it will be held in a non-volatile CMOS chip area.

  You will need to take your laptop to an authorized Toshiba Service Agent to be reflashed with a new BIOS chip.

  Kind regards

• Satellite M40X: After update Bios keyboard keys do not work correctly

  I have a Satellite M40X and I had updated the Bios to v 1.60. and now the keys u, m, 7 and the up arrow will not work correctly. The problem is that there is not another version of Bios to use.

  How can I solve my problem?
  Can I get the old version of the bios?

  Thank you
  Gabriel

  Hello

  No won´t you be able to recover the old BIOS. The only two options are:

  1. try to update BIOS and check if it work s
  2. in the case of no success, please visit the [ASP Locator | http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT] to search for the nearest ASP in your country and ask them for a checkup of material and repair.

  Welcome them

• Satellite L - after update BIOS no longer start

  I just got an email saying that there was an update of the BIOS for my laptop. He began to install but my computer turned off and will not start back up
  Help, please!

  The update was: ACPI Flash BIOS version 1.90 for Sam/Sat Pro L355D/L305D (PSLE0U, PSLC0/1U)

  Nice to know, but the situation is clear.
  Something went wrong during the process of updating the BIOS and module ROM was not properly flashed.

  Only the ASP can help you mate
  So, don t waste time and get in touch with your country guys!

  See you soon