After you download updates in Windows Vista using my friend constantly "impossible Configuration.", returning changes

Similar Questions

• Restarted my computor it goes to a black screen and wants to enter either windows vista or press f8 after you download updates from windows

  Original title: when I grew my dell desktop computer up inspiron 530 and windows vista home it goes to a screen that wants to get me things I don't know what I have to enter secure mode or windows vista

  I do not have ubdersand when my computor restars it goes to a black screen wants to enter or f8 for windows vista or press am I something wrong, after I check my restar updates too after that I think they are downloaded

  Hi ISSYHenico,

  1. you receive messages or error codes?

  This problem can occur if updates failed to install.

  2. are you able to boot into normal mode if you select Windows vista?

  Method 1:

  Step 1:

  Otherwise, try to start in safe mode and perform a system restore and check:

  Check out the link:

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  If you can start in safe mode, then you can try a system restore to a previous point where you have not experienced the problem.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Once you're able boot in normal mode, try the following steps:

  Method 2:

  Step 1:

  You can view the history of update for updates failed which is causing the problem.

  Check out the link:

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed

  Step 2:

  You can try to install the updates manually from the Microsoft Download Center download and check if it helps.

  Check out the link:

  http://www.Microsoft.com/downloads/en/default.aspx

  Hope this information is useful.

• After you download updates from windows on 13/03/13, I get an error scanner that reports a problem of communication. I still can't print. Printer is HP Officejet 4680 connected via a network c

  I get an error code 4 [(2,7,800,40007)] after installing updates from 13/03/13.  I restored the system (Windows 7) to a restore before 12 o'clock point and all is well.

  Thank you

  I added the updates one at a time and then restarted each time.  Between each update, I also tested the scanning interface.  At the time where all updates have been added to the scan function still worked.  My guess is that the order of installation, or (more likely) the obligation to reboot between updates made the difference.  I still have my wife updated so will update this when I do the update.  Either way, I remember when I went from XP to Win7 in 2010 I had the same error, but that has been resolved by the HP driver updates.

• After you download a movie windows media player trys to open the file in the library and will not play movie I can do

  After you download a movie windows media player trys to open the file in the photo gallery and won't play movie what can I did the same thing when I try to play a dvd

  If you are using Win XP: -.

  http://www.dougknox.com/XP/file_assoc.htm

• Cannot start Windows Vista after you download updates

  Original title: the last time I got a windows vista download it did.not end now if I turn off my computer it won, t wiyhout restart using a rescue disk also can, t open all files except when I connect

  Last time I had a windows down load it didn, t finished and my computer locked up had to use a rescue disk to start

  Hiartco1993,

  1. do you know what download you tried?

  2. do you receive error messages or error codes?

  3 have you tried booting in safe mode?

  You can first try to start in safe mode and try a system restore and check if it helps.

  Step 1:

  You can try to start in safe mode.

  Check out the link for more information on starting your computer in SafeMode below:

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  You can try restoring the system to safe mode.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  You can consult the links for:

  System restore

  http://Windows.Microsoft.com/en-us/Windows-Vista/What-is-System-Restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• When I download updates for Windows Vista, all 'important' updates install ok but all 'recommended' updates fail. Error code 80073712. How can I fix it? I'm not technical guide interested in plain English the fool would be appreciated.

  See above

  + http://support.microsoft.com/kb/931712
  The "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712" TaurArian [MVP] 2005-2010-implementation to date of Services

• After doing an update of windows vista Theme is mucked up!

  I recently installed an update for my laptop (acer aspire) and the theme of windows vista was classic. Im a computer wiz and cannot find any solution. Ive looked for a theme aero screen refreshes 'PLEASE WAIT' and nothing other that my wallpaper has changed. Now its very annoying and need help ASAP!

  Hi CorrieGreen, I suggest you from the link to run the steps troubleshoot windows aero. http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Aero

• Lexmark x 73 will work after that I updated to Windows Vista?

  Original title: lexmark x 73\windows vista

  I have windows vista and I want to install my lexmark x 73 prints I will update of windows, but I don't know to update and it'll work

  Hello Betty,.

  According to their website, the X 73 is a laser printer that works on the XP Windows OS only. So if you have this impression under Windows, it must be in compatibility mode. Is this the right printer, or you have a different model?

  If this is the right printer, it will only work on a 32-bit operating system, so you'd be lucky so he can print in Windows 7 Home Premium, 32-Bit operating system. Can you confirm the model number for me please? And your version of Vista is 32-bit or 64-bit?

  If you can answer these questions, I will try to provide you with further assistance.

  Kind regards

  BearPup

• No sound in Windows Vista Media Player after you install updates to Windows Feb 2012

  Help, please. Feb 2012 updated windows installed without crahing but now I have no sound in windows media player 11. I downloaded the new codecs to cnet, but which did not set me. More trouble again – UGH!

  Hello

  Are you able to hear the sound of the computer?

  I suggest you follow the steps mentioned below:

  Method 1:

  Race he difficulty of the link and check if the problem persists:

  http://support.Microsoft.com/mats/AudioPlayback/

  Method 2:

  If the step above is unable to check if Windows media player is not muted in the volume mixer. Follow these steps to check:

  a. open Windows media player.

  b. click on the volume icon in the taskbar.

  c. click mixer.

  d. in the list of applications, make sure that the volume icon is not silent for your Windows media player. If he is silent, then turn it back on.

  e. check if the problem persists.

• After you download Home premium Windows 7 32 bit of digitalriver, my screen went black! __Please help me. Thank you.

  Is my computer screen went BLACK after downloading the window & home premium 32-bit digitalriver.
  Please help, thanks.

  Wrong forum. Post here for assistance: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• The error message is im like error: 0xC004D401 Description: the security processor reported a system file mismatch error. After doing the update of windows Vista.

  There is a problem with your license so notifications will no longer appear
  You will no longer receive communications, including those concerning your license or activation.
  To try and fix this problem click on one of the links below.
  Error: 0xC004D401
  Description:
  The security processor reported a system file mismatch error.

  Vista Service Pack 2 (SP2) is installed?

  ==========================

  1. Download this diagnostic tool, save it to your desktop, then right click on the saved file and select run as administrator to run the utility: http://go.microsoft.com/fwlink/?linkid=56062

  2. once the race completed, click the continue button, and then click the copy button (on the Clipboard).

  Note: You can open a new file in Notepad, paste the contents of the Clipboard in it & keep for future reference.

  3. start your own, new thread in the following Microsoft Genuine Advantage forum and paste the results of the diagnosis of MGA tool in your post, and a clear description of your problem:

  http://social.Microsoft.com/forums/en-us/genuinevista/threads

  4 Troubleshooting specialist will analyze the data and recommend an appropriate solution.

• loss of internet access after you download updates from microsoft

  Last night, I got 21 microsoft updates and have been installed just before turning off my computer.  This morning, I had no access to the internet and I had to restore the computer to the past with the help of the assistance service.  Tonight as I was closing, I received the same 21 updates and I'm having the same problem.  What can be done to prevent this

  Try to avoid the installation of the hardware updates next time.

  Hide the Windows 7 updates that you don ' t Want never to install

  http://TechNet.Microsoft.com/en-us/magazine/ff382716.aspx

• Blue screen after the automatic updates in Windows Vista

  Automatic updates caused a blue screen that says STOP: c000218 {registry file failure} the registry cannot load the hive (file): \System\System32\Config\COMPONENTS or its log or replacing. It is damaged, missing, or not accessible in writing.

  Ideas: I don't know what happened when it restarted it started this

  • will simply not get to start it to connect screen or system repair
  • Error messages: STOP: c000218 {registry file failure} the registry cannot load the hive (file): \System\System32\Config\COMPONENTS or its log or replacing. It is damaged, absent, or not writable. :
  • Recent changes made to your computer: just the updates that was supposed to be important
  • What you have already tried to solve the problem: System repair, restoration of the system or safe mode do not work

  in this case, restore your netbook factory settings. "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• After you install updates to windows, sys. crashed, error message: stop: 000002 [fatal system error], sys. starts, gets the same message and goes in a loop

  blue screen with an error message, then stops and restarts (loop) must shut down physics

  Make sure that it is the stop error? See what says the full stop error. And it shows the name of a file or a driver? It will start in safe mode / safe mode / networking? Try restarting press F8 select last known good config

• Tried to update in Windows Vista Home Premium, stuck in the "Configuring updates" and "reboot" loop 11/05/2011

  Hello! I have a portable M-6752 Gateway under Vista Home Premium.  It was perfectly functional this morning 11/05/2011.  Then I noticed the sign (of exclamation in a circle) who said the new updates.  So I started the update and thought nothing of it.  It was until an hour later and I realize that my laptop was still updated.

  Right now I am stuck in a loop between "Configuring updates: stage 3 of 3-0% complete.»  Do not turn off your computer' and auto restart.
  I tried to restart in 'safe mode' and 'safe mode with network.  These attempts did not help.  I'm still stuck in the loop and my laptop is overheating.  The only thing I could do was to be able to.  Fact that several times already.
  Fortunately, I have another laptop and is able to ask for help.  Can someone help me?  I'm NOT a technical person.  Thank you.

  Thank you, but my laptop WAS running Service Pack 2 when this problem happened.  It has been resolved.  For anyone having this problem, here is my experience and solution.

  When I found myself stuck in a loop and my laptop keeps restarting without giving an error message, it began to overheat.  I turned off.  When I turned on it again the screen "Advanced Boot Options" appeared.  I chose 'Safe Mode'.  Then, I went to "Configuring updates...". ».  Machine started himself reboot again.  It happened a few times.  Finally I had to turn the phone off again.  All of a sudden when I turned on again, the "Windows Error Recovery" screen comes on.  There is a choice, 'Launch Startup Repair'.  I chose this.  Machine asked me if it is allowed to create restore point.  Of course.  Then I GOT!  I was saved by Windows self-diagnosis program.
  If you are not familiar with the screens that I mentioned, please search 'screen name' and the word 'image' as a whole.  You will see what these screens look like.
  Now I realize there is another way to reach the Startup Repair.  When you turn on again, press the F8 key several times.  Which will bring you to the early Startup Options screen.  On advance Boot Options, there is a choice 'repair your computer', scroll down to this choice, press ENTER.
  Turning off my machine during the restart is another way to force the "early start Options" screen appears.
  I read that some do not have the "Repair your computer" option according to your PC in the screen «In advance Startup Options»  You will need to know how to get to the "Windows Error Recovery" screen.
  As a last resort, you can restart Vista recovery disk.  Many manufacturers do not understand that when they send the PC for you.  However, it is available for download for free on the internet.  You can download and make your own within 30 minutes.  I hope this helps!