After you start the computer, I get the error msg: "ProfileCnt.Exe has encountered a problem should be closed.

Similar Questions

• Installation of QuickBooks 2012 gives the error "set.up.exe has encountered a problem and needs to close."

  I try to install new software Quickbooks 2012 on the computer that is running Windows XP. The installation will start and get error "set.up.exe has encountered a problem and needs to close." I spoke with Quickbooks technical support on this issue, but they have been unable to solve the problem. I have read several of these posts on this forum about this kind of mistake, but none seem to be directly related to my situation. I plan to try to reload the Windows XP operating system, but unfortunately, the CD is missing. I'd appreciate any help that anyone could have.

  original title: setup.exe error

  Hi Bill Gammon,.

  You can go ahead and try the suggestions and if the problem persists then I you suggest to run the Microsoft Fixit and then try to install Quickbooks 2012.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Let us know if that helps.

• When I start my computer, I get and Error Message (InfoCenter.exe - Application error)

  When I start my computer, I get and Error Message (InfoCenter.exe - Application error) that someone knows what this means and why I make it?

  Hello

  Follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if the same error occurs:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2:
  I suggest you try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in the article above.

  Check if that helps.

• An error BACK porogram get running. "NTVDM. EXE has encountered a problem and needs to close. "

  Running a program back that I have used for years, network of four computers, now with the same message. "NTVDM. EXE has encountered a problem and needs to close "what should I do?

  There seems to be a problem with KB2707511:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/ntvdmexe-has-encountered-a-problem-and-needs-to/3ad3ae01-9685-4155-8d85-28f979e599af?page=1

• There is no sound in my computer and I also get the error "Windows media player has encountered a problem while playing the file" while trying to play audio in Windows Media Player.

  Original title: what is a possible cause for any audio?

  Whenever I try to play any type of audio file I get the error message "Windows media player has encountered a problem while playing the file." All of my audio is disabled, no notification sound, no in his game. All audio drivers are up to date and when I try to diagnose the problem, he told me that there is no problems found. It also gives me this error message when you try to play video files or listen to internet radio on the media player.

  Hello

  If I understand correctly, you are facing problem with playback of the audio files in Windows Media Player. I would like to know more information on the issue, so that we can help you better.

  1. have you made changes on the computer before this problem?

  2. is it works much earlier?

  Let us try the following methods and check if it works for you.

  Method 1:

  Run the troubleshooter in Windows Media Player.

  Open the troubleshooting Windows Media Player settings Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2:

  Try to re - register the files associated with Windows Media Player.

  a. Click Start, type 'regsvr32 wmp.dll"without the quotes into the search option and press ENTER.

  b. restart your computer later.

  Also see the following Microsoft to issue his No. article.

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Please reply with the status of the issue, so that we can better help you.

• "Receive the error message" your PC has encountered a problem and needs to restart.

  Original title: stuck in a reboot loop, can't connect.

  Today, my laptop (VAIO, Windows 8) restarted while I was there and since then has been very slow to start. During loading, I get messages such as 'Your PC came across a problem and must restart' and then 'preparation auto repair' again and again.

  I have tried rebooting several times and sometimes I'll get to the login screen, but when I log into my account (which is the only one available) it says "could not load user profile. Right now, I restarted and did not get to the login screen. It says "repair disk errors. This can take more than an hour to finish."

  Windows 8 is the operating system that is installed with the system. I tried to boot into safe mode several times (SHIFT and F8 at startup), but instead to get a menu of options the computer says "Your PC encountered a problem and needs to restart" and starts all over again.

  Hi Geo,

  What is the model number of the Sony VAIO laptop?

  This problem could be due to corruption of the system files, I suggest you try to perform auto repair using Windows 8 disc of Windows recovery environment (WinRE) and check if it helps.

  To run auto repair on follow computer Windows 8 as follows:

  a. insert the media (USB or DVD) and restart your computer.

  b. press the key F12 (usually it's F12, but it may differ between computer manufacturers) and choose the drive in which you inserted into the installation media.

  c. once that the Windows Setup window appears, follow these steps:

  d. click Next , and then select fix your computer.

  e. you will then see a blue screen and an option to choose. Choose the Troubleshooting option and select Advanced options.

  f. you can choose automatic repair of the advanced boot option.

  Keep us updated on the status of the issue.

• "NTVDM. EXE has encountered a problem and needs to close"error after installing the update of security KB2707511

  After you install the update of security KB2707511 when I try to open a ms - dos 16-bit program, I get the following error: "NTVDM. EXE has encountered a problem and needs to close. " Application does not start. I can run without error command.com. Uninstall KB2707511 in Control Panel, add & delete, the application works. Install KB2707511 error occurs.

  I have a lot of customers running a 16-bit MS-DOS - program that receives the same error.  It seems not to be a malware problem, as it is homogeneous across many machines (unless, of course, all have the same problem of malware).  By uninstalling the KB2707511 and the KB2709162 they all work. Something in these updates is in conflict with something in these dos programs causing the "NTVDM. Erorr EXE'.

• Implementation error "Adobe RoboHelp 8 has encountered a problem... ».  Cannot open the project

  Windows XP / RH8 / RoboSource Control 3.1

  Tried to open a project that I have not consulted for while.   After you click Yes or no to the question «Get latest...» "I get the error"Adobe RoboHelp 8 has encountered a problem and needs to close.  We are sorry for the inconvenience. »

  I tried several times with the same results.  Forum search finds several results, but see nothing that corresponds to that.

  I think it may be a project file to remove that can allow me to open the project, but thought I should ask first.

  Any help will be greatly appreciated.

  Joe

  Remove the CPD file allowed me to open the project in HR

• When I start my computer I get an error message about V protect Application on the Windows XP-based computer

  When I start my computer, I get an error message, "V Protect Application has encountered a problem and needs to close".

  System information Utility version 1.0.0.1

  OS version: Microsoft Windows XP Home Edition, Service Pack 3, 32-bit

  Processor: Intel (r) Celeron (r) CPU clocked at 2.66 GHz, x 86 Family 15 Model 4 Stepping 1

  Number of processors: 1

  RAM: 1 GB

  Graphics card: RADEON 9250, 128 MB

  Hard disks: C: Total - 76316 MB, free - 47785 MB; KC: total - Mo 305168, Free - Mo 304760;

  Motherboard: MICRO-STAR INTERNATIONAL CO., LTD, P4M266-8233,

  Antivirus: AVG Free Antivirus, update: Yes, On-Demand Scanner: enabled

  I run the above system and would appreciate any help with the removal of this message as if I don't send it to Microsoft, it goes.

  Thank you

  Roy.

  You can try those Microsoft committed the 'experts' ideas Support Engineer (1, 2, 3) for safe, clean boot Mode, Online Scanner, but I think that most of the people who know how XP would recognize that there is no component 'V protect' in Windows XP and a simple search Google reveals that your problem is with your AVG software and has nothing to do with Windows XP.

  You should look in their forums (like me) and here's what they suggest:

  Vprotect belongs to AVG Security Toolbar.
  Please try to run repair installation using the latest installation package.

  If the problem persists, please follow all the steps in the instructions to complete reinstallation .

  I think that if I were you, I would follow the instructions on the page AVG to uninstall and reinstall your AVG because there may be other parts of AVG who are afflicted that you have not yet discovered, but in AVG, some people with V forums protect problems find that AVG repair install works.

• After you install the update, I am getting NTVDM. EXE has encountered a problem and needs to close

  OK a bit on my setup, I have a Server 2008 R2 as a DC area, and in my Department and the engraving, we have four XP Pro SP3.  After the engraving machine is updated Automatic last night when we try to access a MS-DOS 16-bit program that works, I get the following error.

  NTVDM. EXE has encountered a problem and needs to close. We are sorry for the inconvenience.

  Error signature

  AppName: ntvdm.exe AppVer: ModName 5.1.2600.5512: ntvdm.exe

  ModVer: 5.1.2600.5512 Offset: 000206f1

  See http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/ntvdmexe-has-encountered-a-problem-and-needs-to/3ad3ae01-9685-4155-8d85-28f979e599af

• When I start my computer, I get an error message «Error loading C:\Users\jimhoss\AppData\Local\Temp\...» »

  When I start my computer, I get three error messages concerning three different files.  They all have the same path and they all say
  "Error loading C:\Users\jimhoss\AppData\Local\Temp\bsipi.dll".
  "Error loading C:\Users\jimhoss\AppData\Local\Temp\udilt.dll".
  "Error loading C:\Users\jimhoss\AppData\Local\Temp\mounINFO.dll".

  I have Malwarebytes and run it a couple of times and I remove all the files it detects as malicious, but I still receive these error messages when I start my computer.  I also have MS Vista.

  Hello

  They seem to be the remnants entered boot for malware.

  Malwarebytes is normally very good to remove things like that.

  The problem persists after scanning, take these startup entries:

  "How to use MSCONFIG in Windows Vista"

  http://www.netsquirrel.com/Msconfig/msconfig_vista.html

  You can also use this free program to do, too:

  "Autoruns for Windows V11.32"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  See you soon.

• When I start my computer I get this error message: Windows cannot open this file: GLBD4EA.tmp

  When I start my computer, I get this error message:

  Windows cannot open this file: GLBD4EA.tmp

  To open this file, Windows needs to know what program you want to use to open it. Windows can go online to look for automatically, or you can manually select from a list of programs installed on your computer.

  What do you do?

  -Use the web service to find the appropriate program
  -Select a program from a list of installed programs

  No selection works for me. I don't know what concerns the .tmp file, or why I need to open it.

  Please help :)

  Hello

   
  Perform the following steps to remove the file from the registry.
  a: type regedit into the search box start and click on enter.
  b: Search now to the following key
  HLKM\SOFTWARE\Microsoft\windows\currentversion\run
   
  then delete the following key
  53E412B3-9907-4F9E-A6DC-D0106D1D72C
   
  Important:  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information
  However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/)
   
  Hope this information helps.

• I get a message "Module PC Doctor has encountered a problem. If the problem persists, contact Microsoft. »

  I get a message "Module PC Doctor has encountered a problem. If the problem persists, contact Microsoft. »
  I've just updated all the security tools and performance of PCTools and still get the message. The error report ask if I want to send a report and I do often, but I have had no contact from Microsoft.
  I contacted PC Tools, but theyt haven't bee able to solve the problem no more.
  MCS

  original title: error pctdoctor

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/PC-Doctor-module-has-stopped-working-but-not-sure/8cb6be4a-3148-4FF7-a7ef-adf35b653583

  It is in the Vista forum, but the same applies.

  you run analyses:

  Download, install, update and scan with these full free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  http://www.Microsoft.com/security/scanner/en-us/default.aspx Security Scanner   

  a report sent to Microsoft does not require a response, it is used to determine if a fix is needed after numerous reports of errors are sent.

  This is probably due to malware.

  What is the brand and model of the pc, current antivirus, operating system and service pack?

• I recently turned from a PC to an IMac.  I use Lightroom 5 and I can no longer open older videos or import videos from my D7100.  The error I get is "dynamic links media server has encountered a problem.  Anyone know a fix or will be updated into the ligh

  I recently turned from a PC to an IMac.  I use Lightroom 5 and I can no longer open older videos or import videos from my D7100.  The error I get is "dynamic links media server has encountered a problem.  Anyone know of a patch or upgrade to Lightroom 6 will fix the problem?

  Hey billo,

  Could you please check and confirm the version of Lightroom you use?

  What operating system do you use?

  ~ UL

• No matter what I try to play, I get this message, "Windows Media Player has encountered a problem while playing the file." And the media player does not work

  Windows Media Player

  No matter what I try to play, I get this message, "Windows Media Player has encountered a problem while playing the file."  And the media player does not work

  Reset the WMP.

  Step by step instructions are given here: -.

  http://www.mydigitallife.info/how-to-uninstall-and-re-install-Windows-Media-Player-12-WMP12-in-Windows-7/