Click of the mouse stops working after you start the first application
Hard to explain this problem. First time I click on what either in an application after computer startup (Word, Excel, etc.) the arrow of the mouse moves, but the click does not, anywhere, not on the desktop, taskbar anywhere. Accentuates not delayed anything either. But when I press ctrl-alt-delete, move the arrow down to start the Task Manager and click here, then click Start to work and things get even once highlighted and everything seems normal. HP Pavilion dv9000t Vista Home Premium 32-bit Intel Core 2 duo, 2 GHz, 2GBDDR, this is going on for about 6 months now. I just noticed, I installed a trackball logitek, and after installation, it does the same thing.
Hello
· What is the brand and model of the computer or the mouse?
· Did you do changes on the computer before the show?
Follow the suggestions below for a possible solution:
Method 1: I suggest you to run the Microsoft fixit from link and check mentioned below.
Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/en-us
Method 2: I suggest you to check and clean the boot if the problem persists.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.
Let us know the results.
Tags: Windows
Similar Questions
-
The mouse stops working after a few minutes
Original title: my USB mouse ch
My mouse stops working after a few minutes. whenever I have uninstall and re - inserts into the usb port of the computer does not recognize it.what can I do?
Hi Ann Juel,
1. what happens when you connect the USB mouse to the computer? You get the error message?
2. What is the brand and model of the computer?
3. What is the brand and model of the mouse?
4. What is the operating system installed on the computer?
We will analyze and identify the cause of the problem.
Method 1:
You can connect the mouse to another computer and check. Also perform the methods provided.
Also, try a different USB port and check.
Method 2:
Follow the link below a convenience store opened.
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
Method 3:
Check whether all settings in the mouse properties are correct or try to change the mouse settings and if it works.
Change the settings of the mouse
http://Windows.Microsoft.com/en-us/Windows7/change-mouse-settingsHope this information helps. Response with status so that we can help you.
-
original title: MY MOUSE STOPS WORKING AFTER PC IS IDEAL for 30 minutes. How can I fix this without having to reboot my pc
I hang the mouse up to the wrong computer
Suggestions:
1. If you use a wireless mouse, check the battery.
2. use a different mouse and see if you have the same problem in the SAME conditions (idle for 30 minutes). If you have not, then your mouse may be defective.
-
Keyboard stops working after you press caps lock.
On a compaq laptop presario CQ60-300SO the keyboard stops working after you press the caps lock button. The keyboard does not work once the computer starts, but after going in under the keyboard properties control panel and press the 'OK' button, this will work. Buy keyboard works when the computer RECORDS, so I can't get to BIOS. The keyboard work until windows starts and I activate it via the properties of the keyboard by opening the window and press OK immediately. I tried updating the driver but I only find that the keyboard already has the most recent drivers. I tried to restore the drivers and that does not work either. I also disabled start all programs and services to see if it was a problem caused by a program or service and still no luck. It's a very strange problem. I noticed that the keyboard IRQ ranges are both 64-64 and 60-60, which i thought was weird but that's maybe normal. Any advice will be appreciated.
Hello
You did changes to the computer before the show?
Try the suggestions in the link and check if it helps:
Troubleshoot keyboard
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-keyboard-problems
You can also post your query on Compaq support forum:
-
The IntelliMouse Explorer 3.0 USB mouse stops working (after ding dong)
It seems that after an update of my optical mouse USB freeze (there's a ding dong) and then stops working and the Red led on the mouse turns off.
The mouse is a PIN to USB Intellimouse Explorer 3.0 X 06 25120 PID 55249-576-4441001 - 0 - 3901; the operating system is XP. I downloaded the drivers for the mouse from microsoft site (IPx86 - 1033_8.15.406.0) and re-installed readers. The problem persists.I can unplug it, then plug in USB and it will work for a short time, and then it freezes againPlease advise me on measure to correctHi JimBrowne,
1 update you tried to install?
You can check the updates that are installed recently.
a. Click Start, click all programs and then click Windows Update or Microsoft Update.
b. on the Windows Update Web site or on the Microsoft Update Web site, click on view update history. A window opens that displays the updates that have been installed or that have failed to install on the computer.
You can try to perform a restore of the system to a restore point before you have been affected by the problem or the update has been installed and check.
Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
To run the system restore, you can consult the following link:
How to restore Windows XP to a previous state
For more information, you can also consult the following link:
Keyboard and mouse stops responding when you upgrade to Windows XP
Hope this information is useful.
-
One of my programs, observation of the BSE market stopped working after I got updates for my Windows XP today (03/07/2010). BSE is the Bombay Stock Exchange and I got BSE mKT Watch free program from the Bombay Stock exchange website and it is very important to me.
Uninstall the updates that you have obtained on 03/07/2010 and see if that solve the problem. If so, then install updates one at a time to see what update stopped the program run.
If on the other hand, the program is still defective, then this is perhaps a problem with the program itself.
Please investigate the above and post back with the name of the update or if, in fact, it is the program that was the cause of the problem. TaurArian [MVP] 2005-2010 - Update Services
-
TosSmartSrv.exe stops working when you start up Vista
TosSmartSrv.exe stops working whenever I start my computer (Vista)
What is this file, and what I can do to resolve the situation?
I have a new Satellite Toshiba Quad Core and have not seen this message on my old Toshiba Satellite.
Hello
Toshiba Satellite Quad Core says nothing about your model of laptop so what model you have exactly?
I tried on my laptop for this file, and it seems that it is for the utility alert SSD HARD drive. It s stored in this directory:
C:\Program Toshiba Toshiba HDD SSD AlertIn your case, I would try to reinstall the utility. I also checked the Toshiba page and there you can download. Just search your laptop model on the driver download page and you will find! ;)
Welcome them
-
Satellite C660 - the mouse pointer stops working when you start program
Some features:
Toshiba Satellite C660-1r1
Windows 7 sp1
Avast Antivirus (free version)Problem:
When I start a program (for example. Sonos controller) on my laptop my mouse pointer stops working. It does not happen with all programs! When I go into Device Manager, my synaptic touchpad and my hid mouse is working also. When I press ctrl - alt - del, the pointer can move again, but when I come back it stops again. I have a work around is not a solutionWhen I disconnect my windows account and log in again, it will solve the problem. When I start a program again the pointer will freeze up again.
I did a complete system of virusscan and a pre start virusscan and my laptop is virus-free.
I uninstalled the mouse and in drivers reinstalled synaptics them but that has not worked. I added a new account windows but that did not work.
By pressing the keycombo FN + F9 has no effect.
I am somehow at the end of my ideas...Can anyone help!
When I start a program (for example. Sonos controller) on my laptop my mouse pointer stops working. It does not happen with all programs!
This problem happens using the touchpad only or have you noticed the freezing of cursor using the external USB mouse too?
What is the notebooks touchpad works properly without loading and using this 3rd party software?
For example, work the touchpad with Microsoft office (Word, Excel, etc.) or navigation in internet by using IE or Chrome?My guess is that the pre-installed 3rd application part could affect the functionality of the touchpad.
-
USB mouse stopped working after system update
I'm running Windows 8 here and it updates automatic system has run and disabled use my connected USB mouse (manufacturer: Targus | model: AMU4201EUK)
When I search the drivers in Device Manager tells me I'm using the latest drivers available and can't seem to find a driver for this specific mouse online.
I use an external keyboard connected via USB and works without problem so I'm lost as to why the mouse would stop working. He able to go to the mouse as the LED inside turns on when it is plugged. Windows made his usual sounds when its connected and disconnected from.
This happened last week and to work around, I restored windows since the eve of the update and it worked without problem. Windows tries to install the updates again after a few days, then the mouse will become unusable. I've lost the ability to return to this State, now I'm sure that Windows has replaced something in this update.
The mouse uses of Microsofts HID drivers that are up to date and I confirmed the mouse works on other systems and on my laptop USB ports are functioning normally.
Any suggestion is appreciated.
See this similar post semi for some additional options open to you.
After update, windows 8 pro will not be closed or sleep with connect to internet
http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_update/after-update-Windows-8-Pro-wont-shut-down-or-sleep/24bdbd5a-AEEE-4ADB-B470-7ef5685acb99Have you had a look in Device Manager for errors with USB devices?
Use the Device Manager and uninstall the concentrators root USB and devices which show now on your machine. Restart and let XP rediscover and see if that solves your problem.
If you uninstall the mouse in Device Manager, then reboot, Windows should find the mouse and install the appropriate drivers.
Uninstall or reinstall a device
http://TechNet.Microsoft.com/en-us/library/cc725782.aspx -
Word stop working after you install Microsoft updates
I use MS Office Professional 2007 and Windows Vista. Some updates have been pushed to my PC yesterday morning and restarted my computer. Since then, Word has stop working. I have not seen any problem with Excel or Access, the right word.
SYMPTOM: I opened an existing Word document, and the lower part shows the number of words = 0, and my document does not in fact. When I close Word, I get a message saying that Word has stopped working. Details of the accident are the following:
Signature of the problem:
Problem event name: APPCRASH
Application name: WINWORD. EXE
Application version: 12.0.4518.1014
Application timestamp: 45428028
Default name of the Module: mso.dll
Fault Module Version: 12.0.6425.1000
Fault Module Timestamp: 49 65443
Exception code: c0000005
Exception offset: 0003bf32
The system version: 6.0.6001.2.1.0.768.3
Locale ID: 1033More information about the problem:
LCID: 1033
Brand: Office12Crash
skulcid: 1033WHAT I TRIED:
1. I tried to launch the MS Office diagnostics, but the problem remains.
2. I supported at each update from Microsoft that was pushed to my machine from 13/08/2009. Still no luck. Some updates I couldn't get out (received a message that the source was not reliable, even if it says Microsoft Corporation). All of these updates 'not reliable' were related to one of the Office products, not Windows Vista operating system.
3. uninstalled & reinstalled MS Office Professional 2007Hello
Here's what can get out you of this problem.
Try to run the word in Safe Mode & see if this is useful:
Start--> Run--> winword/s
Check, if still the Word crashes. Try to repair Office 2007:
How to repair problems in the installed 2007 Office programs and features
You can use one of the following methods to detect and repair problems that are associated with installed Microsoft Office programs and features, such as the registry settings and the installation files missing. You cannot use these methods to repair personal files, such as worksheets or of models.
Method 1: Run Office Diagnostics from a 2007 Office program
- Start the Office Diagnostics tool. To do this, use one of the following methods:
· For Office 2007 with a program menu, click Office Diagnostics in the menu help.
· For Office 2007 with a Ribbon of program, follow these steps:
1. click the Microsoft Office button, and then click Program Options.
Note In this option, the program represents the name of the program.
2. in the Navigation pane, click resources.
3. click on diagnose.
- Click continue.
- Click Start the Diagnostics.
If the Office Diagnostics tool identifies a problem, it tries to solve the problem.
- Once the tool Office Diagnostics complete, click close.
Method 2: Run the tool detect and repair from Add / Remove programs
- Click Startand then click Control Panel.
- Double-click Add or remove programs.
- Click Microsoft Office 2007 Edition, and then click Edit.
Note In this option, edition represents the edition of Microsoft Office is installed on the computer.
- Click repair, and then click continue.
Hope this information is useful.
Kind regards
Savan - Microsoft technical support.
-
First pro stopped working when you start Help
My first Pro CC keeps giving me a "first pro has stopped working" when I try to start it. What should I do?
Jasper,
Thank you.
I got the fixed number. I had to update the drivers for AMD processor. Now, I'm
good as new.
I appreciate your offer to help.
If I have additional problems can I contact you?
Take care
Genero
Wednesday, March 26, 2014 05:53, Jasper Schwartz
-
I bought another keyboard Microsoft Wireless Comfort Keyboard and Mouse 5000 for my partner as he just got a new laptop. I liked my as the original and has therefore whoever we decided to buy exactly the same package. The only problem is, as I plugged my partners, my mouse and keyboard do not work. I've tried new batteries and I tried to use the usb, but nothing works and there is no reset button on the mouse or the keyboard (that I can see anyway).
I'm desperate to get it working. Any suggestions please?
Thank you
Hello
See the keyboard or mouse manual to locate the reset button to zero, to assistance that may help you resolve this problem.
If you are unable to locate the reset button then, I would say to contact hardware support team.
http://www.Microsoft.com/hardware/en-us/support -
The mouse stop working after the installation of updates
Have Windows Vista on laptop. Important Windows Update installed today. Have not installed the optional updates. Restarted the computer. The mouse no longer works. Control Panel - mouse shows only Synaptics touchpad installed. How to operate the mouse?
Hello
1. what day you're talking about?
2. What is the brand and model of the mouse?
3 have you tried any other mouse to connect to the computer of the question?
4. have you tried to connect the mouse to any other computer?
Please follow the steps below.
Method 1:
Run the Microsoft Fixit from the link below.
Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/
Method 2:
Try to update the drivers mouse and chipset and check if it works very well.
Updated a hardware driver that is not working properly
-
Toshiba with vista touchpad mouse stopped working after the long sleep.
I left my Toshiba laptop with Vista only for a few hours and when I came back I had a lot of difficult to resume. When he did power to the top of the screen is fixed to the external monitor, and touchpad mouse will not work. I did a system restore to several days ago, but it did not help. I also installed service pack 1 and 2, hoping that would be useful, but it did not. What should I do to get the touchpad mouse works again? I have the back of the screen, but not the mouse.
Read the info on sleep disorders in the tutorial above.
http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html
Also read this tutorial; as well as the 'related links' at the bottom of the links above.
See you soon.
Mick Murphy - Microsoft partner
-
Restarting the computer solves the problem, but the problem occurs every time that I have change user. Deactivation and reset the settings do not appear to address them. Any suggestions? Thank you!
In addition, I note that demand, ApntEx.exe... too bad. I had to put an end to this process and run it again. Maybe this will help someone else.
Now it's working. I had to go to (ctrl + shift + ESC) Task Manager and end the process, ApntEx.exe. Then I went to File-> new task (run...) and type "ApntEx.exe" in the box and press ENTER.
Maybe you are looking for
-
Performance of YouTube on some videos
So I came across a strange bug that I can reproduce on my MBP 2014 (Iris Pro) and my iMac end 2015 (with GPU), some videos on YouTube compleltey kill the performance of tabs. Stutters and takes about 4 seconds to go full screen, dropping about 100 im
-
He told me that I maybe not allowed and will not install
After hitting Run and extracts from the file, I get a showing of dialog "Run as," "you may not be the necessary permissions to use all the features of the program you want to run." You can run this program as a different user or continue to run the p
-
I had a few malware downloaded with my Firefox. How can I get rid of him?
The malware is totally screwing up my computer with unwanted ads. I can even watch netflix more because the ads cause the view to move to the bottom and I can't see the whole picture. I want this gone adware2. My norton can not handle and other place
-
Network Wi - Fi has disappeared from the list of available networks
My network name has disappeared from my list of available networks and all 7 of my wireless devices decreased by connectivity. When I plug in the router, the computer searches the available networks and the indicator light on the Ethernet cable is g
-
MY SCREEN IS GEEKING. AS SOME TRAVEL WILD METH., SIZE TIMING TURN SIGNAL... STUFF JUST PSYCHO. HELP OR I'M GOING TO HAVE TO COME OFF SOME SEROQUEL AND * FOR MY TOSHIBA!