Again the issue of sample database
Well, I did a search and these questions have been asked a dozen times. I browsed many of them and found a few cases the answers.
I also found this link for the sample templates and Scripts, but it did not work.
I tried the. The DMD and the DDL files. SQL scripts. I could get a few ERDs, but that's all. I wanted to be able to connect to a database and all objects, stored procedures, functions, indexes, etc. which are associated with.
I use 11g Enterprise Edition on Windows 7 Professional 64-bit computer. I heard tell that Express Edition databases, but I need to work with more features than XE.
Thank you!
This indicates that you indeed have a database created, and sampling schemes are installed.
There is no "front-end" application for sampling patterns
Srini
Tags: Database
Similar Questions
-
Where to download the sample database for Siebel Innovation Pack delivery Oracle Cloud 2015?
Hello
Where to download the example for Siebel Innovation Pack 2015 database?
I downloaded the complete packages for Siebel Innovation Pack 2015 for Windows 64 - bit Oracle Cloud delivery, but I can't find the sample database installation folder after downloading all available components.
Please help, thanks.
Hello
DB sample installer are no longer available on Oracle Cloud delivery. To get the sample DB, you need to download the Group of hotfixes 5 of Siebel 15 "Patches and updates" section of the portal My Oracle Support (Patch Id: 22081062) and extract the image from the network using SNIC as usual. You may notice that SNIC now offers local ORACLE XE and sample database.
Also if you select ORACLE XE options while creating the network image and inspect the network image files, you will miss the separate installers. This is because the sample for Oracle XE database Installer is included in the Web Client of Siebel (Mobile/Developer) and the local database setup is included in the Siebel tools.
So when you run Setup of the Siebel Web Client for the installation of the patch group, you can choose to include the database, which is installed in quiet mode. Please try to install web client and let us know if it gives you the opportunity to choose to include the example database.
For more details, please visit virtual library:
http://docs.Oracle.com/CD/E63029_01/books/SiebInstWIN/SiebInstCOM_Image2.html#wp1995894 http://docs.Oracle.com/CD/E63029_01/Books/SiebInstWIN/SiebInstCOM_Image2.html#wp1995894
Hope this information helps.
Thank you best regards &,.
Jean Arpit
-
Sending information to the issuer and confidential form to a database
I have an application form for an air show, can be seen here www.hollisterairshow.com/volunteerapp.php and when the user clicks on submit their information is added to a MySQL database and the user is redirected to a "thank you" page, this works very well and may be sufficient "such what." Try it if you want!
I would try to improve it a little bit in two ways:
- View information of the volunteers submitted on the "thank you" page and/or
- Give the user the ability to send by e-mail a copy of their information on their own (it includes days they expect to be available, favorite activity etc.)
The information that the user submits also includes personal information such as email address, phone number and mailing address and are therefore not accessible by anyone other than the issuer and administrator of aeronautics or me. I have a password protected to secure the area for the administrator to access all the info and it works fine. The primary key of the volunteer table is a "volunteernumber" which is a numeric field that is incremented by 1 automatically when recording is written in the table.
So my concerns are:
- How to move the volunteernumber back to "thank you" page so that it is not visible to the user (if I used a URL parameter the user could see that they were, say, volunteers number 29 and it wouldn't take a lot of skill to change to a different number of volunteer and see someone other info)
- I think I read somewhere that the sending of an e-mail message can open me up to malicious attacks - not very likely, but still possible
I would really appreciate a pointer in the right direction. I use DW CS4.
Thank you
Tony
tonybabb wrote:
-could there be a problem of formatting here or if I made another mistake?
To use a session variable, page should start with session_start();.
-
They replaced the "defective wires" that caused some of my keys to do no work. When it came to the keys does not, it's a 50-50 chance sometimes they worked perfectly and other times that they would not work. I back my laptop yesterday but I have experienced the same keys not work - they finally started working again, but I will return to Boston for college next week and my applecare warranty is up Sept. 4. My question is will take apple my laptop back and fix what they don't apparently fixed the first time, even if my applecare is released or do I need to rush ALL THE WAY back to apple to drop it again. the only reason why I want to wait is because I want to see if it happens again, I did an update and it looks good, but if it happens again I want to be fixed correctly.
It is not completely repaired to your satisfaction. Immediately call Apple Care or bring your Apple Store. Nobody here can answer your questions. Apple can only respond.
Good day.
-
Hello
I'm building one pretty simple compared to my other site and have never had this problem before that's why I'm really confused.
Two of my pages keep transfer of a couple of cm to the right, and others remain the same.
I'm gone in the FAQ forum and found that someone else had the same problem so added
HTML {}
overflow-y: scroll;
}
Who stopped to question, until I rebooted the computer today, and the issue is back. I use DW8.
This is the CSS for the site
* {
padding: 0px;
}
{#wrapper}
width: 890px;
margin-right: auto;
left margin: auto;
}
#wrapper #header {}
height: 77px;
width: 890px;
margin-right: auto;
left margin: auto;
are-family: Georgia, "Times New Roman", Times, serif;
-font size: 70px;
color: #000000;
}
{#wrapper #div2}
height: 9px;
}
#wrapper #header #leftheader {}
float: left;
width: 740px;
height: 77px;
}
#wrapper #header #rightheader {}
float: left;
width: 150px;
height: 77px;
}
page of #wrapper #main {}
height: auto;
}
#wrapper #navigation {}
height: 30px;
are-family: Georgia, "Times New Roman", Times, serif;
are-size: 18px;
color: #000000;
}
{#wrapper #div1}
height: 9px;
}
#wrapper #bodyarea #left {}
background-color: #FFFFFF;
height: 200px;
width: 757px;
float: left;
}
#wrapper #bodyarea #bottom {}
height: 50px;
background-color: #FFFFFF;
}
#wrapper #bodyarea #left1 {}
width: 640px;
float: left;
height: 180px;
background-color: #FFFFFF;
}
{#wrapper #autremoiintro}
height: 110px;
}
#wrapper #bodyarea #right1 {}
float: left;
height: 180px;
width: 250px;
background-color: #FFFFFF;
}
#wrapper #bodyarea #bodyarea1 {}
height: 700px;
}
#wrapper #main page contact {}
width: 890px;
}
#wrapper #body #bottom {}
background-color: #FFFFFF;
height: 50px;
}
#wrapper #bodyarea1 #leftcon {}
float: left;
height: 350px;
Width: 465px;
are-family: "Times New Roman", Times, serif;
are-size: 16px;
background-color: #FFFFFF;
}
#wrapper #bodyarea1 #bottom {}
background-color: #FFFFFF;
height: 50px;
}
#wrapper #bodyarea1 #rightco {}
float: right;
height: 350px;
width: 425px;
}
#wrapper #bodyarea1 #leftport {}
float: left;
height: 170px;
width: 640px;
are-family: Georgia, "Times New Roman", Times, serif;
are-size: 16px;
text-decoration: underline;
}
#wrapper #bodyarea1 #rightport {}
float: right;
height: 170px;
width: 250px;
HTML {}
Overflow-y: scroll;
}
And here is the html code for a page that does not move
<! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""
" < html xmlns =" http://www.w3.org/1999/xhtml ">
< head >
< meta http-equiv = "Content-Type" content = text/html"; charset = ISO-8859-1 "/ >"
autremoi < title > < /title >
< style type = "text/css" >
<!--
{body
background-image: url(images/background.jpg);
background-repeat: repeat-x;
margin-top: 0px;
}
->
< / style >
< link href = "css/layout.css" rel = "stylesheet" type = "text/css" / > "
< style type = "text/css" >
<!--
a: link {}
color: #000000;
text-decoration: none;
}
a: visited {}
text-decoration: none;
color: #000000;
}
a: hover {}
text-decoration: none;
color: #CCCCCC;
}
a: active {}
text-decoration: none;
color: #000000;
}
{.style2}
are-family: Georgia, "Times New Roman", Times, serif;
-font size: 24 PX;
}
.style10 {do-family: Georgia, "Times New Roman", Times, serif; do-size: 18px ;}}
.style9 { do-family: Georgia, "Times New Roman", Times, serif; }
are-size: 14px;
}
->
< / style > < / head >
< body >
< div id = 'wrapper' >
< div id = "header" >
< div id = "leftheader" > < a href = "index.html" > other me < /a > < / div > ""
< div id = "rightheader" > < a href = "http / /" > < / a > < / div > ""
< / div >
< div id = "navigation" > < a href = "autremoi.html" > other me < /a > | "" < a href = "team.html" > < /a > team | < a href = "portfolio.html" > < /a > portfolio | < a href = "rates.html" > < /a > rates | < a href = "contact.html" > Contact < /a > < / div >
< div id = "div1" > < img src = "images/div.png" alt = "div1" width = '890' height = '8' / > < / div > "
< u > < span class = "style2" > team </span > < / u >
< div id = "div2" > < img src = "images/div.png" alt = "div" width = '890' height = '8' / > < / div > "
< div id = "bodyarea" >
< div id = "left" >
< class p = "style10" > Mattaeus Ball < /p >
< class p = "style9" > Mattaeus Ball is a professional photographer who has been published in the world. He is also a designer and set Builder. An all around artist with a taste for the magic and the macabre. Mattheus has & quot; eyes & quot; When it comes to making certain this one and is much more than a photographer! Mattheus is a visionary and loves nothing more to make her visions and live through his photographs. You want Mattheus can do with his countless talents and imagination. < /p >
< class p = 'style9' > < / p >
< / div >
< div id = "right" > < img src = "images/matt.jpg" alt = "matt" / > < / div > "
< div id = "div3" > < img src = "images/div.png" alt = "div" width = '890' height = '8' / > < / div > "
< div id = "bodyarea2" >
< div id = "left" >
< class p = "style10" > < u > Roseanna < /u > < / p >
< class p 'style9' = > Logan is our head makeup artist. His work speaks for itself, we have searched high and low for an artist who has the whole package and with Martin, we have all this and more! Roseanna vellum is published internationally and has worked for Torture Garden and the clothes Show Live, to name a few. Unique and inspiring Roseanna can help your imagination to life. < /p >
< / div >
< div id = "right" > < img src = "images/roseannanew.jpg" alt = "roseanna" / > < / div > "
< / div >
< div id = "div4" > < img src = "images/div.png" alt = "div3" / > < / div > "
< div id = "bodyarea3" >
< div id = "left" >
< class p = "style10" > Starla James < /p >
< class p = "style9" > Starla James is a professional model, the creator of prop, the dresser of the wig and the stylist. She has worked in different genres within the modeling industry. Charles-Antoine has worked with officials in the past but prefer finding his own work that allows his imagination without limits and current. Has dabbled in the popular genres of pinup and Gothic modelling, she sees herself as more of a model with no particular genre, taking gas from different eras and styles to make his own. Knowledge of Charles-Antoine of fashion through the eras is comprehensive and accurate. < /p >
< / div >
< div id = "right" > < img src = "images/starla wrath.jpg" alt = "starla" / > < / div >
< / div >
< div id = "div5" > < img src = "images/div.png" alt = "div5" / > < / div > "
< div id = "bottom" > < / div >
< / div >
< / div >
< / body >
< / html >
It's one of the pages that moves the html code< ! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > """ < html xmlns =" http://www.w3.org/1999/xhtml ">< head >< meta http-equiv = "Content-Type" content = text/html"; charset = ISO-8859-1 "/ >"autremoi < title > < /title >< style type = "text/css" ><!--{bodybackground-image: url(images/background.jpg);background-repeat: repeat-x;margin-top: 0px;}->< / style >< link href = "css/layout.css" rel = "stylesheet" type = "text/css" / > "< style type = "text/css" ><!--a: link {}color: #000000;text-decoration: none;}a: visited {}text-decoration: none;color: #000000;}a: hover {}text-decoration: none;color: #CCCCCC;}a: active {}text-decoration: none;color: #000000;}{.style2}are-family: Georgia, "Times New Roman", Times, serif;-font size: 24 PX;}body, td, th {}are-family: Times New Roman, Times, serif;are-size: 16px;}->< / style > < / head >< body >< div id = 'wrapper' >< div id = "header" >< div id = "leftheader" > < a href = "index.html" > other me < /a > < / div > ""< div id = "rightheader" > < img src = "images/facebook.jpg" alt = "facebook" width = "150" height = "46" / > < / div > "< / div >< div id = "navigation" > < a href = "autremoi.html" > other me < /a > | "" < a href = "team.html" > < /a > team | < a href = "portfolio.html" > < /a > portfolio | < a href = "rates.html" > < /a > rates | < a href = "contact.html" > Contact < /a > < / div >< div id = "div1" > < img src = "images/div.png" alt = "div1" width = '890' height = '8' / > < / div > "< u > < span class = "style2" > Contact </span > < / u >< div id = "div2" > < img src = "images/div.png" alt = "div" width = '890' height = '8' / > < / div > "< div id = "bodyarea1" >< div id = "leftcon" >< p > other me < /p >6 unit < p > < br / >Clements Mews < br / >5 avenue of Stevenson < br / >BH4 8ED < /p >< p > < a href = "mailto: " [email protected] "> [email protected] < /a > < /p > "< p > 07989414201 / 01202-778414 < /p >< p > Note: keep double clicking on place to zoom in < /p >< p > < br / >" < small > view < a href =" http://maps.google.co.uk/maps/ms?client=firefox-a & channel = s & hl = in & ie = UTF8 & msa = 0 & he's = 53.8006 51, - 4.064941 & spn = 6.881357, 14.941406 & t = h & msid = 207741114753098749885.00049cc26a50e21806ee7 & source = embed "style =" color: #0000FF; text-align: left "> location < /a > on a larger map < / small > < / p > "< / div >< div id = "rightco" >" < iframe width ="425"height ="350"frameborder ="0"scrolling =" "marginheight ="0"marginWidth ="0"src =" http://maps.google.co.uk/maps/ms?client=firefox-a & channel = s & hl = in & ie = UTF8 & msa = 0 & he's = 53.8006 51, - 4.064941 & spn = 6.881357, 14.941406 & t = h & msid = 207741114753098749885.00049cc26a50e21806ee7 & o utput embed = "> < / iframe > .< / div >< div id = "div4" > < img src = "images/div.png" alt = "div4' width = '890' height = '8' / > < / div >"< div id = "bottom" > < / div >< / div >< / div >< / div >< / body >< / html >Thanks in advance for your help.
-Change
#wrapper #bodyarea1 #rightport {}
float: right;
height: 170px;
Width: 250px;
HTML {}
Overflow-y: scroll;
}
on this subject.
#wrapper #bodyarea1 #rightport {}
float: right;
height: 170px;
Width: 250px;
}
HTML {}
Overflow-y: scroll;
}
Note the braces - one of you was missing. Use it instead of the suggestion of Ken.
-
Form with the data of the issue of the database
I made a form so that I can test the connection to a database and fill in the form with data from db.
My form is very simple, and I used MS Access to the db.
The db has two tables:Table 1: ID, wheels, cost
Table 2: ID, brakes, costThe form of hierarchy:
Form:
Displaying the data
Brake and wheel data flows into the ddlists of the db.
Cost values display the costs in the table.
How to "bind" the cost value of the wheels to the wheel data, so that when you select "wheel 2" package. "
the ddlist, the cost value of the wheel 2 package appears in the wheel cost field?
How I will summarize cost fields to provide a total?I downloaded the form and the db here: https://Acrobat.com/#d=HEGvv-CMb0o5uPGxisU1Kw
You need to make calls to two DB. 1 the one you have made already that will fill the DDList with appropriate values. Then a second call that will pass a SQL statement to the DB to retrieve the record that contains the value of the wheels or brakes that the user has selected in the DDList. This part is possible with the code. There is an example how to proceed at this place.
http://Forms.stefcameron.com/2006/09/29/selecting-specific-database-records/
You can mine this site for another form of information DB because it has a couple of different entries on access DB.
Paul
-
Log archiving stuck because of the issue of space
Hi all
I'm on oracle 10G, OS: Linux
Archive logs have been generated and suddenly, because of the issue of space, they don't since I ran out of space.
Now, I have increased the space... The archiving log starts automatically now?
If this isn't the case, then what is the procedure I should follow to start their.
Thank you
Kkukrejathe archives will be lance automatically. If archiving is not the case, your database will be hooked... every time that your database is in archive log mode is automatically activated without having to enable again & new
Check the setting of log_archive_dest_state , that is by default enabled.
no need to worrry... -
Increase in the rate of sampling with external clock
Hi all
I have hardware DAQ-SMU-6361 and SMU-8360 controller in an express chassis SMU-1071. My 6361 maximum sampling frequency is 2 MECH. / s. But I want to use my daq with higher sampling rates. After going through the various positions, I decided for two options to increase my sampling rate. You must connect a 5 MHz signal generator to use as an external clock. Another is to use the timer to synchronize PXI Chassis
My question is
(1) what is the limit to the frequency that we can use as external clock for data acquisition? Which parameter is limiting the performance of the ADC, if we use the higher clock frequency signal?
(2) I also learned about an option called 'base time in PXI Express chassis'. can I use this option? Someone please give me a link to a good tutorial on the basis of time in a single PXI Express chassis?
(3) SMU-1071 chasis, 100 MHz differential clock. Is it possible to use it as a clock to my DAQ 6361 signal?
Concerning
Vaidhin.
HI Vaidhin,
The article mentions the background basket clock as a possible means for synchronization, but this is accomplished using it as a phase reference clock - align the oscillators on board your hardware DAQ which are then distributed down to produce the sample clock. You may not use background basket clock or time base on board directly as a sample clock (on the one hand, these signals is much too fast).
Measuring 1 MHz with a DAQ hardware 2 MHz could not give you what you expect. You will get 2 points per period of your entry - it's just at the limit to avoid aliasing of your signal and of course do not a good characterization of the shape of your signal. You might be able to push the card in slightly beyond 2 MHz but not significantly enough to make a huge difference. You are right that if you have sounds at higher frequencies could be an alias down in your signal. Any noise above ~1.7 MHz will begin to be eased by a bandwidth limited the 6163 (there is a chart in the specifications , showing the bandwidth). If you have between 1 MHz (signal) and ~1.7 MHz noise, you might look into an external filter, but again you are always sampling very slowly to be able to characterize the shape of the signal.
The next steps to the top (in terms of sampling frequency) would be as follows:
4 MHz: SMU-6124
10 MHz: PXI-6115
There are currently no products that use the same DAQmx driver who can enjoy beyond 10 MHz, but NEITHER there also a range of scanners that you may enjoy a lot faster. If you are interested in sampling up to 100 MHz, you may consider looking in the SMU-5122- there are also faster scanners available, but these are probably not necessary for your application.
Best regards
-
To begin with, I am very new to labview and unfortunately on that my first task is to build something rather complicated for a project that my company works. Fortunately it is especially followed rather than control critical processes.
Currently, I have a cDAQ with modules, DI, AO, and TC.
cDAQ-9133
NEITHER 9472
NEITHER 9421
NEITHER 9263
NEITHER 9205
NEITHER 9212
I'm currently running read-write for all 5 of these modules in parallel while loops and analog and digital inputs/outputs modules that all work as expected. Each loop requires 1 sample per channel through the wizard DAQmx etc for each module and I got can interact with all the asyncronosly inputs and outputs which at the moment is the goal. I can switch power switch for each module save memory, or if the need arrives later.
My problem is that the module TC (NI 9212) when tilt on which allows the acquisition of sample 1 loop seems to take much, much longer to collect samples. I have played with different acquisition parameters and can seem to get a continuous flow of data when you use streaming samples, or even when specifying N-samples but I come in questions where the "application cannot catch up with the hardware.
I tried to find an optimal number of samples/sampling, rate, etc I can get an update of temperature more than every 1 to 2 seconds, but if I set the number of samples that are high enough to apparently get a constant flow, what ends up happening waveform graphs seem to lag behind the actual data, and that's where I get errors. I only want 1 sample per channel per cycle anyway. Yet once, all the other modules in the cycle with less than 100ms delay between acquisitions but the module thermocouple ends up being 1-2 seconds. It's okay because in our application temperature should not rise/drop very quickly but its boring nonetheless.
I have the acquisition set up for the same (NI 9212) thermocouple module was like my modules of analog and digital inputs (NI 9205 and NI 9421) take 1 sample every time the task is called so I'm having a hard time understand why do the same for the TC module introduced such a delay. Max sampling rate is supposed to be 95 samples/s/ch, so I guess that the delay must come from call the task over and over again in a loop.
Synchronization and how you have configured the 9212?
In the case of high resolution, it can reach 1.8 samples/s. see page 7 of the plug technique here for rates for the supported modes:
http://www.NI.com/PDF/manuals/374389a.PDF
-AK2DM
-
HP Officejet 5740: HP Officejet 5740 impression &; analysis of the issues
Hello
I just bought a HP 5740 and have implemented to print wireless from my PC, iphone 6, notebk.
I have the following questions & any advice would be much appreciated:-
1. is there a limit on the number of wireless devices, I can connect to the printer?
2. when using the Automatic Document Feeder for scanning/printing of documents, scanned images or impressions appear slightly
biased.
Is this likely to be a problem with the ADF?
I thought possible is to refine the ADF paper tabs more far but I worry about the documents in
could be stuck causing a jam.
Thank you.
Hi @Chrissy_61,
Welcome to the HP Support forum.
I understand that you have purchased a HP Officejet 5740 e-all-in-one printer you have connected wireless to a 10 PC Windows, but also an iPhone 6 and a notebook. I will be happy to answer your questions about the limits to the number of wireless devices that can be connected and the output of the ADF is slightly biased.
There is no real limit to the number of wireless devices can connect to the printer. Devices are actually connecting to the printer on the wireless network of your router, so that it really on the number of the router wireless connections can handle. I've seen some cheaper model routers handle 5 wireless comfortably, but once again, it is more on the router and what are wireless devices on the network the router wireless.
For the unbalanced output when using the issue of the ADF, you definitely want that paper is loaded properly, and the paper guides are to the edge of the sides of the paper without being so tight that it is originally the paper not to remain flat in the ADF. If you have problems tilt when using the ADF, here is a document that can help - the ADF (ADF) documents do not choose paper. It is a generic document that covers all the printers with ADFs.
Please let me know if that solves the problem, or if you need assistance.
In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.
Thank you!
-
Hello
I Keep getting this blue screen under bug death check I found that the issue was csrss.exe. I uninstalled the video drivers intel, but the machine is still crushing.
I join the crush dump files.
Kindly help.
First, you must upgrade to the Service Pack-1
Service pack 1 update.http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1
Additional resources:
http://Windows.Microsoft.com/en-us/Windows7/uninstall-SP1
http://Windows.Microsoft.com/troubleshootwindows7sp1After that, if you're still crashing
These accidents were related to the corruption of memory (probably caused by Kaspersky).If you are overclocking anything reset by default before running these tests.In other words STOP! If you don't know what it means that you're probably not
1-Driver Verifier (for full instructions, see our wiki here)
2-Memtest. (You can learn more about running memtest here) -
0x8004fe21 - "this computer is not running Windows" - KB3024777 update does not resolve the issue
Hello
My Windows 7 has been giving me some problems lately. I get messages that "this computer is not running genuine Windows" (0x8004fe21). I'm running a genuine version of windows, and when I check the properties of my computer, it tells my that I have in fact validated my copy of Windows 7.
I also had a problem when new updates to Windows Update settle not and after a few google searches, I have concluded that this must have been caused by bad KB3004394 update.
It has been suggested that I deleted this update, but it did not show anywhere under installed updates.
It has also been suggested that I downloaded the patch of "quick fix" KB3024777, which is supposed to remove the faulty update.
I did, and since then, the issue of windows updates has been resolved. Again installing the updates of windows, but I still get messages I'm not authentic Windows.In addition, I tried all sorts of things, I found in online forums, but I don't remember exactly what those who were, because most of them were things that I didn't understand.
Maybe you guys can help. Thank you in advance!
I was told to run MGDiag and post the results here so here go us:
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->Validation code: 0
Code of Validation caching online: 0x0
Windows product key: *-* - QCPVQ - KHRB8-RMV82
Windows product key hash: + Rj3N34NLM2JqoBO/OzgzTZXgbY =
Windows product ID: 00359-OEM-8992687-00095
Windows product ID type: 2
Windows license Type: OEM SLP
The Windows OS version: 6.1.7601.2.00010300.1.0.003
ID: {DFF68C19-1503-487E-A692-8C435EF12F1F} (1)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Home Premium
Architecture: 0 x 00000009
Build lab: 7601.win7sp1_gdr.150316 - 1654
TTS error:
Validation of diagnosis:
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 109 n/a
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
Other data-->
Office details:{DFF68C19-1503-487E-A692-8C435EF12F1F} 1.9.0027.0 6.1.7601.2.00010300.1.0.003 x 64 *-*-*-*-RMV82 00359-OEM-8992687-00095 2 S-1-5-21-3113075717-3854388810-3852344427 Dell Inc.. L421X XPS Dell Inc.. A14 20130522000000.000000 + 00011A80F00018400FE 0413 0409 Malay Peninsula Standard Time(GMT+08:00) 0 3 DELL CL09 109 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.1.7601.17514Name: Windows 7 HomePremium edition
Description: operating system Windows - Windows (r) 7, channel OEM_SLP
Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00359-00178-926-800095-02-1043-7601.0000-1052015
Installation ID: 019613804902779735492485549691725206407303392291262906
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial product key: RMV82
License status: licensed
Remaining Windows rearm count: 2
Trust time: 19/04/2015-16:10:57Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: 0x00000000
Beyond: 0 x 0000000000000000
Event timestamp: 4:15:2015 22:03
ActiveX: Registered, Version: 7.1.7600.16395
The admin service: recorded, Version: 7.1.7600.16395
Output beyond bitmask:--> HWID data
Current Hash HWID: LgAAAAAAAQABAAIAAAABAAAAAwABAAEAln3yCEagjqxGq8ILYPbwHZ5vvtyWYw ==Activation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes
Windows marker version: 0 x 20001
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
CL09 DELL APIC
CL09 DELL FACP
DBGP DELL CL09
HPET DELL CL09
STARTING DELL CL09
CL09 MCFG DELL
TCPA DELL CL09
CL09 DELL SLIC
CL09 DELL UEFI
ASF! REFERENCE DELL CL09
CL09 DELL SLIC
SSDT CRV COMPAL ORB
ASPT DELL CL09
FPDT DELL CL09
SSDT CRV COMPAL ORB
SSDT CRV COMPAL ORB
LAURENCE DELL CL09
SSDT CRV COMPAL ORB
SSDT CRV COMPAL ORBI don't see anything abnormal in your report - which probably means that the problem is a race condition where your AV is to win the fight for access to certain critical files when the Service for the Protection of software needs to access.
Certainly, it will disappear after a few days.
-
Download again the photos in the photo library of sd card
I downloaded pictures from my sd card to 3 times without erasing my card, and each time he copied all the images instead of just to add new to the picture library. I removed them all from the library thinking I could then just download it again and only have a copy. When I went to do this, I received the message «there are no new photos to download» I wonder if there is a way around this so I can download photos from my sd card to the library of photos once again.
Hi Stacey1111,
Thanks for posting in the Microsoft Community.
I understand that you are facing the issue with downloading photo in the photo library of SD card.
I suggest you to see the links and check.
Change the settings for image import:
http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-importing-pictures
In addition, try it on different USB ports and see if that helps.
http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device
See also:
Working with digital images
http://Windows.Microsoft.com/en-us/Windows7/working-with-digital-pictures
-
Original title:
I just installed windows7, I had to uninstall itunes in order to complete the instalation of windows7. everything went well until I tried to reinstall itunes.
During this process, I get the message "you don't have sufficient privileges to complete this installation for all users of the machine. log on as an administrator and try this installation again. ». but I am logged on as administrator.
Hello
To resolve this problem, use the following methods. After completing the steps in each method, check to see if the issue is resolved before you go to the next method. If the problem is resolved by any method, you do not have to use other methods.
Method 1:
Right click on the installer for iTunes and click Run as administrator.
Method 2:
Disable user account control settings and check.
Enable or disable the User Account Control
Note: User Account Control (UAC) can help prevent your computer from unauthorized changes. UAC notifies you when changes will be made to your computer that require administrator-level permissions. Disabling it can make your compromised computer. Please make sure that enable you UAC, once you have completed troubleshooting.
Method 3:
Allow the default Administrator and try to install it in this user account.
a.Click on Start, click principally made programs, Accessories, right-click on command prompt and select run as administrator.
b.Type in the following command and press ENTER.
NET user administrator / active: yes
c.Log disable the current user account and log in to the user called Administrator account.
d.Install iTunes in this default Administrator account.
e.Once of that installation is complete, the default administrator is disconnected.
f. log in to your user account.
g.Disable the default Administrator account. Follow these steps.
i.Click on Start, click principally made programs, Accessories, right-click on command prompt and select run as administrator.
II. type the following command and press ENTER.
NET user administrator / active: No.
-
What do I need install Oracle Database 11 g 2 for the Oracle 10 g database migration?
Hi all
Would you be kind enough to help me with the following question! I currently have Oracle Database 10 g on the old servers to my work and I want to install the GR 11, 2 on Windows Server 2008 R2 Enterprise Oracle database to new servers for upgrade. I also forms, reports and Designer 10 g to maintain our existing applications. So, I already looked in the Certification and found the following:
Latest version of the product: latest version of the database server window weblogic
Form Builder 11.1.2.0.0 11.2.0.4.0 7, 2008 R2, 2008 10.3.6.0.0
Reports 11.1.2.0.0 11.2.0.4.0 7, 2008 R2, 2008 10.3.6.0.0
Designer 10.1.2.6.0 11.2.0.1.0 xp, vista, 7, 2003 (all 32 bit)
For Designer, it is approved for a 32 - bit window, so I'm having trouble with the new requirement of system this window must be after 2003. I want to take all of the availability and follow the Oracle certification (except that I will be given Designer because of compliance) as above. I'm new with Oracle, and I don't know what comes with what to do it is complete.
1. I'm going to install a database server (free 11.2.0.4.0 as described above) in a new server (2008 R2), then what I have to install the WebLogic Server with it?
2. I'll install the generator of reports and Forms Builder (11.1.2.0.0) in another server (2008R2), so what I have to install WebLogic Server as well with her?
3. what else do I need to install on this two server so that they work so that I can begin to migrate all existing data, forms and States more?
Any advice would be greatly appreciated. Thank you.
Remember that this forum is targeted to the Oracle Forms product, for questions about the database can be better answered in one of the areas of database. That being said, here are my comments:
1 I'll install a database server (version 11.2.0.4.0 as described above) in a new server (2008 R2), then what I have to install the WebLogic Server with it?
A database facility didn't need of WLS (which I am aware). Consider what you want is a typical design at three levels. Database - average level (applications server) - Client (tools and end user). Each level has nothing to do with the other installation point of view assuming that they are not installed on the same computer. WLS is a middleware software (medium level). Be sure to check the product documentation before performing any installation. The 11.2 DB docs can be found here:
http://docs.Oracle.com/CD/E11882_01/index.htm
2. I will install Forms Builder and Report Builder (11.1.2.0.0) in another server (2008R2), so what I have to install WebLogic Server as well with it?
Tools (Forms Builder, generator of reports, etc.) are not remote or web tools. These must be installed on each developer's computer. The installation of these tools does not require that WLS be installed first (on the developer's computer), but there is no need to be run unless the developer wants to apply locally for testing. For a production deployment (multi-user), a similar concept will be used. WLS will be installed first, followed by the forms and reports Services (runtime). It will be on your remote server (medium level). Software distribution you use will be exactly the same for the developer and the installation of intermediate level. The difference will be in the options you choose during installation. If you want to include manufacturers during installation, simply check the appropriate boxes when you are prompted.
Also, if you plan to use the forms/States 11 GR 2, I recommend not using 11.1.2.0 and instead use 11.1.2.2, which is the latest version. F/R 11.1.2.2 installation requires that you first install WLS 10.3.6. You should refer to the product documentation before beginning any installation. Specifically, carefully examine the product Setup Guide and Guide to the system requirements. The 11.1.2.2 doc library can be found here:
3 what else do I need to install on this two server so that they work so that I can begin to migrate all the existing data, forms and States on?
Looks like you've covered everything. The granular details will be covered in the Installation and Guides to the system requirements.
My recommendations:
o ensure that each machine has at least 4gig of RAM
o ensure that each machine has a static IP address before you start any part of the installation. This can be done without a static IP address, but you must take additional steps (see Guide to Sys Req).
o on machines where you plan to install WLS, make sure you have a 64 bit JDK installed first. If you don't use a F/R 11.1.2.2, you must use Java 6. However, if you decide to use 11.1.2.2, you can use Java 6 or 7. Do not use Java 8 in all cases.
When it comes to the designer, it must be installed on an old machine. In General, I do not recommend to use it longer. Although there is currently not a way to full migration out of it, you can use SQL Developer to manage the db objects that were created/used with it. There are several MyOracleSupport documents that discuss the issue. You can search the Knowledge Base of MOS to find or contact Support for more information.
Maybe you are looking for
-
How can I get rid of BBC iPlayer signals multiple, all with the same content?
How can I get rid of several BBC iPlayer stream? I have 3 all with the same content. This has happened Each time Firefox opened == I don't know
-
BlackBerry Smartphones Internet using WiFi possible without Mobile provider?
I have a Blackberry Bold 9650 with no Mobile provider (he previously had Verizon). Is it possible to use the Internet on the Bold 9650 by connecting to my WiFi at home, or is it only possible if the phone has Mobile provider service active? I am abl
-
I just bought a Canon 5 d Mark IV but the rough version of the camera on my PC (version 7) does not read the files. I went to help and updates, then it sys it comes to the current version. Then, I went to the Adobe site and downloaded Camera Raw 9.1.
-
Impdp remap create a trigger on the wrong place
Dear all,I exported a (expdp) dump of a user USER1.After that, I imported (impdp) with the remap_schema option.Impdp remap_schema = rΘpertoire USER1:USER1_BKP = DUMP_DIRECTORY dumpfile = SCHEMAS.dmp logfile = SCHEMAS.log = STORAGE TRANSFORM: nAfter t
-
I had downloaded on two computers of Lightroom. I h e announces a crash and the other I must reset to manufacturer settings. Now, I downloaded my maximum number of downloads, but it does on all my computers. How can I go about fixing this problem?