Agent Hyperic 5.8.2 - metric not collected

Similar Questions

• Moment of frustration: OEM12c - 10 agents showing the same error metric

  Note, that I'm working with the support of the Oracle... It's a joke... So frustrating. I want to help to improve the product, but for me to try to delete the alert and restart the agent does not address the underlying problem that triggers the alert in the first place. I have at least 10 officers reports the same error of evaluation metric.

  Incorrect process exit: java.nio.charset.MalformedInputException: input length = 1

  Metric group	Storage data alias
  Goal
  Reported event	February 1, 2014 6:32:04 AM EDT
  Last updated	February 1, 2014 6:32:33 CEST
  Message	Incorrect process exit: java.nio.charset.MalformedInputException: input length = 1
  Last comment	Incorrect process exit: java.nio.charset.MalformedInputException: input length = 1: February 1, 2014 6:32:33 CEST
  Internal name of the event	storage_reporting_alias
  Type of event	Error metric assessment
  Category	Error
  Registered	February 1, 2014 6:32:33 CEST

  Someone else reported the bug in last year.... but I guess that after 5 months gave to... I'm at roughly the same point.  Why bother with unnecessary back?

  Bug 16582611 : ERROR of ASSESSMENT METRICS DATA STORAGE

  He has my rants on Monday morning...
  (PS Last 12.1.0.3 on linux.. all up to date on the CMS and agents)

  The oem12c code does not handle some cases with storage. I found that it is not manipulated inactive LUN (sorry not a storage expert so I don't know the terminology).

  What happened, it was our servers had LUN connected to a Bay of storage and then they were migrated to a different storage group. The old LUNS were still visible by the oem and under flags of this error.

  Once our storage/unix people removed these bland/dead/old LUN the error disappeared. (we still have another 20 or so errors in oem, but the unix team has yet to complete the cleaning of all servers).

  Connected supported just a bug... but never solved the problem at all.

• Information system may not collect information. Unable to connect to this computer. Check that the Winmgmt service is running.

  Information system may not collect information.

  Unable to connect to this computer. Check that the Winmgmt service is running.

  My problem has been set by following the steps:

  1. click on start-> type CMD-> right click on CMD of the result-> click on run as administrator

  2. type the command net stop winmgmt and press enter

  3. Open command prompt and click on start and type system32-> open the folder system32 in the result pane.

  4. in the system32 folder open Wbem and locate the repository folder

  5. right click on the repository, then click Rename

  6. change the name of the drop to Repository.old folder

  7. switch back to the command prompt and type net start winmgmt and press ENTER to run command

  8. close all windows and restart the computer and try to Msinfor32.

• {REQUEST] windows could not collect information to osimage

  Hello guys I have a problem here. You see now that I have windows 8.1 and I just bought windows 7 ultimate. As im trying to install when I click setup then it says windows could not collect information to osimage install.wim does not exist. I saw some issues in some forum and somebody said that I have to copy the cd of windows 7 ultimate in my hard drive (C), but it still does not work. Guys do you know what im supposed to do? Thank you

  UH sorry im not the expert. Could you me more as easier or something? And what is the cause of the error?

  Faulty installation or DVD your DVD drive is faulty.

  You do not have the ability to create a thumb / Flash drive to install Windows.

  After you download if necessary. ISO file (see my previous post, follow the step #4).

  (4) for instructions on creating a bootable USB key to install Windows 7:
  Read: http://www.sevenforums.com/tutorials/2432-usb-windows-7-installation-key-drive-create.html
  Or: http://arstechnica.com/business/2009/12/the-usb-flash-drive/

  Optional software to create a Bootable Windows 7 DVD
  http://support.Microsoft.com/default.aspx/KB/977640

  J W Stuart: http://www.pagestart.com

• ODI-1222: start failure on agent edge internal: logical schema was not found in the main repository.

  ODI-1222: start failure on agent edge internal: logical schema was not found in the main repository.  but when checked that all the logical schema is perfect

  because of this session is failing.does anyone have the solution to this problem

  Hello

  Do you have the logical schema of the you configured for the respective physical server and assigned the same context. If not, please set up and re - test your work.

  hope this can help you

  Kind regards

  Phanikanth

• Discover the State of the agent (18) composer initialization error: could not join the domain (expected 815 seconds)

  Hi all

  My Active Directory, View Manager, composer and vmware vcenter are all on windows 2008 R2.

  I took a spanshot of Windows XP SP3 with DHCP setting, installed vmware tools, see agent installed, firewall disabled, the Member of domain etc.

  When I tried to clone the snapshot XP to several XPs with the pool creation process it get error in personalization with error, below

  *03/10/10 18:01:49 IST: View Composer agent State (18) initialization error: could not join the domain (expected 815 seconds)*.

  Help, please.

  Thank you

  Selim Desai

  VCP410

  Take a look at http://communities.vmware.com/message/1613937

  the solution has been http://support.microsoft.com/kb/944043/en-us

  André

• AE CC Mac: After Effects collect Files do not collect files, including the project!

  I need to send a customer projects collected, but the file > addictions > command collect the files does not collect some files (once the project has been reduced, so all files in the project are needed), including the project file!

  I end up just with a record collected containing a 'Pictures' folder which includes some files and others not. This is a nightmare! There are hundreds of cases that will take days, I don't have to track down each file manually.

  Any suggestions?

  J

  Hey everybody-

  Running on Mac 10.9.5 CC 2014

  I kept getting this error when you try to collect:

  After effects WARNING: the file 'filename' could not be found.

  So I know this is going crazy, but the problem was the mouse and a Wacom tablet. Whenever I gave him entry when he began to collect mistake like that. Then I tried to put in the wacom pen and clicking on save dialog enter and boom - worked perfectly. Really strange bug - I hope Adobe that address it soon. Accessories for chandra hope on creative cow to track down the problem:

  https://forums.CreativeCOW.NET/thread/2/1052704

  hope this helps, and hope, that the issue is dealt with quickly.

  Wes

• Optimizer / schema Sta - Stats are not collected on certain tables in a schema

  Hello
  
  I have a unique situation. Every weekend, we collected his stats on SCHEMA AR.
  
  execute fnd_stats.gather_schema_statistics ('AR', 10, 4)
  
  Recently, I noticed that for some tables in the schema, the last_analyzed very old watch. Could someone explain the reasons why the stats are not collected for the table?
  
  DB - 10g
  HP - UX OPERATING SYSTEM
  
  I checked if the table is marked for locked statistics - STATTYPE_LOCKED in DBA_TAB_STATISTICS. The column returns null.
  
  Thank you
  Josiane

  This seems to be a database of EBS. If so, can you find an entry for this table in the FND_EXCLUDE_TABLE_STATS table? This table has a list of tables for which statistics are not met.

  Is there is no entry in the FND_EXCLUDE_TABLE_STATS table, then it's a TEMPORARY table?

  HTH
  Srini

• Do not install the agent Hyperic for Linux

  Hello

  I have trouble to install Hyperic version 5.8.1 of the agent on RHEL 5.10

  I use 'hyperic-hqee-installer-x86-64-linux-5.8.1.tar.gz' and when running hyperic-hqee-installer-5.8.1/installer/bin/hq-setup.sh and then answer questions on "the terms of the agreement" and "software to install" I get:

  --------------------------------------------------------------------------------

  An ERROR has occurred, the installation cannot continue.

  /Hyperic/hyperic-hqee-installer-5.8.1/installer/data/setup.xml:157 error: the following error occurred during the execution of this line:

  /Hyperic/Hyperic-hqee-Installer-5.8.1/installer/data/Setup-interactive.XML:27: java.io.EOFException

  --------------------------------------------------------------------------------

  Where can I get more balls to more deeply analyze this question?

  Kind regards

  Frédéric

  Hello

  1 run the command /hyperic/hyperic-hqee-installer-5.8.1/setup.sh and not hyperic-hqee-installer-5.8.1/installer/bin/

  2. If you just want to install the agent you can unzip hyperic-hqee-agent-x86-64-linux-5.8.1.tar.gz in your /hyperic/hyperic-hqee-installer-5.8.1/ directory to your desire location and run

  Agent-5.8.1-ee/bin/HQ-agent.sh start

  Yaron

• PS_Scheduler agent does not collect not data in Foglight 5.6.4

  Hi all

  We are schedular areas of NT surveillance for Peoplesoft applications. For this, we Monitor PS_Sched agent and given necessary properties in it and created PS_Schedular and PS_SchedServer agents to monitor instructions SQL and use resources.

  We are facing some problems in PS_Schedular agent because it collects no data and throwing an error like "there is no way the home of Peoplesoft.

  

  Please suggest some troubleshooting steps to resolve this problem...

  Thank you best regards &,.

  Guenoun

  This error has to do with the database connection setting is the PS_Scheduler agent properties.  Check the settings and make sure that the settings are correct.  Don't know what DB platform this PS environment use, but make sure that the settings are correct by accessing the Agent status-> and change the properties of the agent for DB connection settings.

  The f

• Hyperic 5.8.2 Server with Agent Hyperic 4.2.0.7 - supported?

  Dear all,

  I installed the Hyperic 5.8.2 server in Debian Wheezy (System1).

  I installed the Hyperic Agent 4.2.0.7 in an another Debian Wheezy (circuit 2)

  I entered the follg. configuration @ Agent.properties

  agent.setup.camIP = 10.184.0.152

  agent.setup.camPort = 7080

  agent.setup.camSSLPort = 7443

  agent.setup.camSecure = yes

  agent.setup.camLogin = hqadmin

  agent.setup.camPword = hqadmin

  agent.setup.agentIP = * default *.

  agent.setup.agentPort = * default *.

  agent.setup.resetupTokens = yes

  I tried to start the Hyperic Agent System 2.

  He has successfully started and was discovered automatic; I approved the resource for monitoring.

  Only works live Exec. Apart from that, I'm not able to see the chart or any value of metric data.

  I get a message like

  "There is no indicator metrics data to display for the listening period between.

  
  

  Also availability appears gray [resource-> Browse].

  I have already synced between vitesse1 and System2.

  In Hyperic agent.log, I get the following error will print continuously.

  2014-07-16 10:41:06, ERROR 772 [Thread-1] [MeasurementCommandsService] error getting real-time measurements: error recovery value: calculated: Type =: the use of the disc

  2014-07-16 10:41:06, ERROR 772 [Thread-1] [MeasurementCommandsService] error getting real-time measurements: error recovery value: calculated: Type = disk: capacity

  Hyperic server don't 5.8.2 supports monitoring of agents deployed with Hyperic Agent 4.2.0.7?

  or am I wrong somewhere?

  Thank you

  Sree

  This is not a supported configuration. The agent must be at least 5.0. 4.6 and up will work also with certain limitations. I highly recommend that upgrade you the agent to 5.8.2.

• Windows Server 2008 R2 (Agent Hyperic 4.4.0 - EE)

  I have a platform of Windows Server 2008 R2 using the 4.4.0 - EE Hyperic Agent Windows which never ceases to appear in the portlet of self-discovery, asserting that the value of the IP has changed. All of the intellectual property has not changed on this box.
  Has anyone else had compatibility issues with running the agent 4.4.0 - EE on a Windows 2008 R2 Platform?

  Yes, it is a known problem. It is attached to 4.5.1.

• How to solve the "metric Errors Collection"?

  Hello
  
  Some targets were not working. I erased the blackout. These were then "_pending state_" for awhile. Now that the Oracle Application Server shows in a pending state and its objectives as OC4J, OC4J JVM, Oracle HTTP Server shows "_Metric Collection Errors_".
  
  So, how to solve the error?
  
  Thanks in advance.

  I assume you mean that you don't have access to the Agent log files? ;-)

  You can try to select the HTTP server in the tabs of all targets and press on [configure] and make sure that all of the eigenvalues are there and say [OK] to save the data.

  Concerning
  SoC

• How can I create a chart that creates new series each year when the data are not collected on a daily basis?

  I collect numbers "occasionally" of my solar system and to create a standardized chart that shows that the generation on an annual basis, so I can compare fall in the fall of each year, etc..

  Because the information is not strictly 'daily' (just whenever I get to it), I don't know how it normalize for several years.

  For example, if I had

  Date - Kw/day

  15/01/10 - 14

  03/04/10 - 18

  18/04/10 - 17

  01/06/10 - 19

  21/09/10 - 15

  03/12/10 - 9

  07/02/11 - 13

  02/05/11 - 16

  17/08/11 - 18

  01/11/11 - 12

  02/11/11 - 12

  05/01/12 - 9

  04/06/12 - 12

  and so on.

  What I'd like to see is a line graph for each year from January to December with these datapoints on it. I have much more "incremental data" that I presented above, but it's on "random dates" during the last 8 years, and I'm just trying to see how each year compared to other years.

  To be at the front, I tried to understand how this in Excel as well, but he could not understand where the other.

  DRM for any tips/tricks/tips!

  Steve

  This might work for you...

  I placed your data in a table named "Data."

  Create a second (in this example, titled 'Table 1')

  

  In the table 'Table 1' months are in the first column and the first row (which is a header row) contains the years - add columns to add new year:

  B2 = if (SUMIFS (data: $B, data: $A, "> =" & (B$ 1, $A2, 1), DATE data: $A, "<" & EOMONTH(A1,0) will GET (DATE B$ 1, $A2, 1, 0) "" "") > 0, SUMIFS (data: $B, given: $A, "> =" & (B$ 1, $A2, 1), DATE data: $A, "<" & EOMONTH(A1,0) will GET (DATE B$ 1, $A2, 1, 0) "" ""), "")

  It's abbreviation dethrone select cell B2 and type (or copy and paste it here) the formula:

  = IF (SUMIFS (data: $B, data: $A, "> =" & (B$ 1, $A2, 1), DATE data: $A, "<" & EOMONTH(A1,0) will GET (DATE B$ 1, $A2, 1, 0) "" "") > 0, SUMIFS (data: $B, given: $A, "> =" & (B$ 1, $A2, 1), DATE data: $A, "<" & EOMONTH(A1,0) will GET (DATE B$ 1, $A2, 1, 0) "" ""), "")

  Select copy of cell B2

  Select the cells B2 at the end of F13, dough

  now select cells A2 through F13 and add a graphic (the XY scatter diagram)

  Add new year add one (or more) new columns for "table 1", then add the year to the top:

  

  Now alone, click the chart to activate the chart.  then click on the button 'change data references '.

  now, drag the data reference control handle to the right to add the new year to the table:

  

  You can add several years to the time, so you don't have to it very often

• Agent Extension SNMP event log has not initialized properly in windows 2008 R2

  I enabled the functionality of SNMP Service and found the following error:

  "Error 2019: Extension SNMP event log Agent has not initialized properly in windows 2008 R2 Enterprise 64-bit.

  I uninstalled all related SNMP Applications and reinstalled the functionality of the SNMP Service, however, I always do face the same error.

  According to the following of Article http://support.microsoft.com/kb/128729 , this requires to contact microsoft to obtain the fix.

  I have a subscription with Microsoft technical support to download the fix mentioned the article above.

  Any help please,.

  Hello

  The question you posted would be better suited in the community pro Windows 2008.
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer