"Aggressive Wi - Fi for mobile data transfer" Developer enabled / disables itself off to restart

Similar Questions

• Windows Mobile data transfer limit

  I use LV 2011 and 2011 Mobile to transfer data wireless to a pocket to a PC computer. Program receiver to PC errors when a large part of the data need to be transferred to your handheld. Here are the details.

  There is a file of inventory on the handheld, 20880 bytes long, which is to be transferred to the computer. When you click on the transfer button, the receiving program on PC gives a time-out error, got only 16380 bytes. This error is repeated, no matter how many time I feed the "ms timeout. I even tried "wait indefinitely", but she has still than 16380 bytes of data out of the 20880.

  I moved the transfer program of the handheld to PC, then there is no problem. This makes me think that there is a limit of size of the data, you can transfer using LV Mobile 2011? But 20880 bytes is really that much data, is it? What's not here? Help please.

  

  MengHuiHanTang,

  Because they have been out one mistake regardless of time-out, its possible that the TCP buffer is not large enough. I did some research on this, and it is possible that we try to send a packet larger than the size of the TCP buffer for the device to windows mobile 5.  I don't think it's a coincidence that you're stopping just before 16384 bytes (2 ^ 14 with just enough space on the left of a heading). I think that the TCP window size setting is actually defined in the registry HKLM\Comm\Tcpip\Parms\TcpWindowSize key, according to this article here. You may need to change to adapt to the device of the chance. I think that later OSs have window scaling a bit take care of this for us.

  The easier way to maybe solve this problem would be to break up of writing in smaller packages. By writing just twice with half of the information each time should also take care of the issue.

  Kind regards

  Kyle Mozdzyn

  Engineering applications

  National Instruments

• The most effective way to the U16-> U32 Array pack for DMA data transfer?

  I have a RT controller who wants to send data to an FPGA using DMA.  In LabVIEW 8.2, I have no choice but to switch to the low blocks of data however U32 my my input data is an array of U16.  This leaves me two choices: 1) wire U16 table directly into the DMA node that will be rude to U32 but I lose 16 bit * #of table 2) Pack the U16 elements in a U32 table before sending it to the bottom.    I have #2 and I have a method that works (and seems to be quite effective) but I have the feeling that I'm doing the hard (or roundabout way).   Is their a simpler (but equally effective) way to do this procedure?  Thank you

  Here's a solution that swaps the bytes and key elements the same. There are several ways to do so.

  

  (for efficiency, you can place the table 'remodel' inside a case structure then, it happens only if necessary)

• -Pop-up notifications (mobile data and system update)

  Hello.
  I am having some problems with the pop-up notifications. I'm on a prepaid monthly plan and sometimes my mobile data is not 'free' which means that I have fresh when I turn it on. Before I had a pop-up notification whenever I try to enable mobile data, attention that this may have costs. For some people, it's pretty boring, but for me it was perfect because it would be a protection for all the times I have turn on mobile data by mistake. Now this pop up shows no more. I think I should have clicked the "do not show this new 'option." Does anyone know how to get it back?
  The other thing is to know how to get permanently rid of notification of update of the system. I don't want 5.1.1 as the battery life is a little ridiculous that this notification is always coming from time to time. I clear the "software update" application cache and it will, but always comes back after restart.
  Thank you

  Hello

  I think you can get the pop-up notification for mobile data if you go to settings > Apps > the 'All' tab > phone > clear data. Note that you could have two of the phone app then erase the data for each group and then restart the phone.

  About the software update notification, I don't think that you can completely remove it unfortunately. He always appears after reboot.

• airplane mode disables mobile data.

  I realized on my mobile that, once I have activate airplane with mobile data mode, it is not turn off mobile data.

  It is always on wifi turns off.

  If there is a way to disable mobile data automatically with the airplane mode?

  Yes, I had there.

  It is the nature of Android itself and as I said, when you switch to airplane Mode, the Mobile data is indeed disabled but not to the OFF position.

  Hope that clarifies everything!

• When I send a text message and mobile data are off, it is not given, but I do not see this message for a few minutes. I can then refer using "send as a text message. How can I 'send as a text message' in the first place?

  When I send a text message and mobile data are off, it is not given, but I do not see this message for a few minutes. I can then refer using "send as a text message. How can I 'send as a text message' in the first place?

  Disable the iMessage?

• How to use mobile data for large app download data

  How to use mobile data for large app download data

  How can I set big data

• I am not able to download apps for my iPhone on the App Store. He just 'waiting '. But never starts the download. I tried with wifi and mobile data. The two are not download apps

  I am not able to download apps for my iPhone on the App Store. He just 'waiting '. But never starts the download. I tried with wifi and mobile data. The two are not downloading the applications Can u find out what's wrong? I use iPhone 5s

  I had the same problem. At the same time hold the screen lock button and the home button until your iPhone restarts. That solved the problem for me.

• How to transfer a single RT for FPGA data

  I start working with the CRio-9012, I want to know how to transfer data from the FPGA RT, I found something about DMA FIFOS, however I notice that it is only possible to transfer pictures, I don't know if I'm doing something wrong. I have another question, is it possible global variable usage in the data transfers between RT and FPGA?

  Filipe

  280584 wrote:
  If I try a fifo DMA allows you to transfer data between FPGA and RT, I choose TYPE: ok DMA HOST-TARGET? or SCOPE TARGET must be selected? In this case, my host is the RT and the target is FPGA ok?

  Yes, you will need to use 'Host to Target' or 'Target to Host' (the FPGA is the target, RT is the host); the one who depends on the direction that where you want to send the data.  Target range is for FIFO that is used only on the FPGA. they are useful for transferring data between the simultaneous loops in FPGA code.

• Data transfer Palm Pilot IIIx for Blackberry 8320 blackBerry smartphones

  Thanks to BBSingh for help posting this message. I would really appreciate help from the members of the forum to provide a remedy that is known to work with my Palm and Blackberry.

  My problem is changing my old (December 1999 vintage) Palm IIIx data to my new Blackberry 8320. Years, I have used the Palm in conjunction with a Motorola L7089 (April 2000 vintage) and their IR ports for data transfer; Unfortunately, the phone fell in water and after drying carefully, he could make and receive calls again its screen remains empty, so no need to send SMS and most of the functions. Sales team convinced me to buy the Blackberry, but I'm starting to wonder if I've been conned, as usual with sellers once they get your money that they are not prepared to do anything else. New technology has undone me. In the long task of transfer of several thousand items manually I had recourse to the expertise of this forum.

  A tip I found has been updated the Blackberry Desk Top Manager to v4.6 and it would list the Palm in its devices to transfer data from. I did, but the resulting Wizard at the point of registration of the Palm, but it wouldn't activate a greyed on the option button. DTM for Windows status options System Tray icon COM1 has been disabled. I could allow it, but as soon as this dialog box has been closed COM1 returned to the disabled state. BTW, this is a non sequitur on COM1 Hotsync of Palm transfers data to the PC via COM1 and the Palm software tools works very well also. I closed all the related applications of Palm and it made no difference. I tried DTM 4.5 with the same result. As an aside how the icon options DTM is deleted from the system tray, Windows Task Manager should be used to close the application.

  Another tip say to export data from Palm in Outlook Express, then DTM would need to be OE. I enabled OE reluctantly because it is a questionable product, a favorite oxymoron is "microsoft security", has exported the Palm data in a CSV file, but when they are imported to OE it's garbage. Repeat the exercise but exported as tab delimited and got a worse result. Try to import or the other of these abortions in my Blackberry has been a waste of time.

  Another tip say export data from Palm as VCF which can import BlackBerrys, but did not say how they did it. Palm tools allows only the comma or tab files in the delimited export formats.

  MY PC is a Dell 4600 with 2 GB of RAM and 300 GB SATA HDD, XP Pro SP3, so that all the relevant fixes SP3 post. Windows Firewall software, the AV and malware have been temporarily disabled, and I logged in as administrator too.

  RESOLVED - 98%

  A big thank you to everyone who contributed ideas. Here is the solution to most data transfer: -.

  1. install the Blackberry Desktop Manager 4.5

  2. download the latest tools of Palm Desktop Manager which is 4.1.4 (I used 3.6)

  3. perform hotsync of Palm IIIx with Palm tools

  4. disconnect the Palm Pilot from PC

  5. connect the Blackberry to the PC

  6. open Blackberry DTM and check ' device (PIN): "appears

  7. Select the device switch Wizard, grant conditions and the next screen shows active button for Palm devices, click Next

  8 calendar, addresses, etc. are read, previews of each appear for approval; with the exception of the calendar. Click OK to finish and get out

  9. close DTM, disconnect Blackberry

  10, opening relevant applications on Blackberry to check, all transferred no problem except the grille which was empty

  I can live without the old calendar entries and do not have to manually re-create handfull. So the question is settled.

• How to download lightroom for my Macbook mobile data (second)?

  Hello

  I have Lightroom installed on my iMac, one I created collections. These Collections are synchronized with mobile lightroom. On my iPad and iPhone, the collections are displayed correctly. Now, here's my Question: I have a Macbook with lightroom installed either. How to manage sync my mobile data of lightroom on my Macbook (download smart previews)?

  Thank you for your support.

  Greetings from the Germany

  Nils

  LrMobile synchronization with a single catalog. So to synchronize the LrMobile for your MacBook, you synchronized catalog to be on it.

  But what you can do on your MacBook, it's using your web browser to access the photos that you synced to LrMobile. Log on to lightroom.adobe.com ("the Lightroom Web') and you can make some adjustments, crop, add stars and flags. You can also drag files from the Finder on your MacBook and drop them in the window of the browser Web with Lightroom. They will appear in your catalog synchronized will be downloaded to LrMobile.

  John

• Accuracy of mobile data use

  Hello

  I recently made a switch of carrier and the new carrier data usage reports average higher than I used to.

  I usually never checked the mobile use of the data in the settings, so I have no experience on how accurate it is usually. I've always had 3GB included and reaches about 1 to 2 GB maximum.

  So, I recently reset the statistics to compare the unusual high numbers reported by the carrier and it turns out that:

  My phone displays 40 MB of data transfer while my carrier charge me 300 MB transfer!

  I asked the carrier and they said that their figures are correct and their charges are what matters. They also told me I should quit by comparing it to the use of mobile data expressed by my phone, it is not accurate at all.

  I am aware that there are certain circumstances why the carrier numbers are higher, for example their billing rounds up to the next full 64 k, transmission, errors that cause returns etc. I expect 10% of the higher numbers, or perhaps 20% higher, but in my case, it's almost ten times!

  Anyone experienced something like this before, or knows how to solve this problem? How are the statistics for you?

  Best regards

  I have not had the problem.  Two iPhone-6 units, both on Verizon 1 G plan.

• making data transfer between two computers

  Hello

  I developed a labview for data acquisition goal program.  I need to run a part of my program in a computer and some said in another separate computer. for data transfer between these two computers, I decided to use the Protocol of data taking. a computer, collect data and send data to the second computer and second computer will control the setting of data acquisition in the first computer. now I have developed the program but it does not work. I wonder if that is enough to link these two PC by a network cable or something needs to be done. of course, I have some problems with the source definition in the Protocol of data taking. need two labview program in two separate computers.

  Best regards.

  the problem is resolved.

  transfer of data from socket, simply connect two computers with a LAN cable, as I did. The problem is the URL parameter. I got the error as follows:

  ==> in main and remote program, the URL must be the same and the computer name that data socket server is running must be incloded in the two URLS. (my mistake was that I had used two different URLS in the main program and remote). either way, I realized that this isn't neceessary to Server execution data socket in the two computer.but that that send data.

  concerning

• Complete data store during data transfer

  Hi all

  I'm having a serious problem with the ability to store data, if I transferred a huge amount of data to a virtual machine through SSH. The data store has a total capacity of 511 GB. During the process of transfer of the virtual machine stops, just when the data store is full. So the only solution is to detach other virtual machines from the data store, but it is not enough.

  We are using VMware ESX 3.5 and virtual machine is Ubuntu Server. Here is the configuration of the virtual machine:

  Memory: 1024 MB

  Processors: 1

  HardDisk1: 6 GB

  HardDisk2: 52GB

  HardDisk3: 230GB

  HardDisk4: 256 GB

  Storage distribution and capacity for the VM:

  # df h
  Size of filesystem used Avail use % mounted on
  / dev/map/vg00-VG00_ROOT
  3.4 G 2.6 G 621M 81%.
  No 495M 220K 495M 1% / dev
  No 500M 500M 0 0% / dev/shm
  No 500M 524K 500M 1% / var/run
  No 500M 500M 0 0% / var/lock
  No 500M 0 500 M 0% / lib/init/rw
  / dev/map/vg01-VG01_home
  5.4 G M 276, 4.8 G 6% / Home
  / dev/map/vg00-VG00_TMP
  1008M 34 M 924M 4% / tmp
  / dev/map/vg00-VG00_LOG
  1008M 53 M 904M 6% / var/log
  / dev/sda1 122 M 118 M 0 100% / Boot
  / dev/map/VG02-VG02_home_dpto
  479G 219 G 236 G 49% / home-Dept.

  HardDisk3 and HardDisk4 are mapped in a (VG02-VG02_home_dpto) LVM volume and its free space is 236 GB. Space free Dtx200: 4, 56 GB. I don't understand why. The problem may be caused by automatic generation VMDK:

  * ficheros00.platform.core.vmdk-> 6 GB

  * ficheros00.platform.core_1.vmdk-> 54 GB

  * ficheros00.platform.core_2.vmdk-> 241 GB

  * ficheros00. Platform.Core.-000002.vmdk-> 24 GB

  * ficheros00. Platform.Core_2 - 000001.vmdk-> 166 GB

  The first time, I got 20G of free space of the data store removing some residual VMs. Then I tried to copy a folder of 15 GB through the network by SSH from another server in files. It was the occupation during the first use: (just to compare)

  * ficheros00.platform.core.vmdk-> 6 GB

  * ficheros00.platform.core_1.vmdk-> 54 GB

  * ficheros00.platform.core_2.vmdk-> 241 GB

  * ficheros00. Platform.Core.-000002.vmdk-> 10 GB

  * ficheros00. Platform.Core_2 - 000001.vmdk-> 164 GB

  It seems 000002.vmdk and 00002.vmdk develop during the transfer of files, but they do not consolidate data. I don't know whether this is a normal behavior. I think that space used for ficheros00.platform.core-000002.vmdk-> 24 GB and ficheros00.platform.core_2 - 000001.vmdk-> 166 GB should be included in the ficheros00.platform.core_2.vmdk - > 241 GB and end of data transfer that they should disappear themselves.

  We calculate the initial free space before allocating hard disks of the virtual machine.

  In this data store, we currently have 2 VM:

  [root@hp585-01 eva4400:-02] # du-sh ficheros00.platform.core./
  472G ficheros00.platform.core

  [root@hp585-01 eva4400:-02] # du-sh lucus01.labo.core_1/
  36G lucus01.labo.core_1

  Any help would be appreciated. Thank you very much.

  Best regards

  Harry.

  Log files, I see that capture files two instant belong to basic disks on the two different data stores on this host ESXi 3.5 Update 3. In any case with being thick implemented basic disks, you should be able to delete snapshots in the snapshot with off the virtual machine Manager. If the virtual machine is still on when you delete the snapshots, you need more disk space for another, temporary snapshot (snapshot to help consolidate)

  When you have removed before snapshots, you did this with the virtual machine power on or power off?

  Turn off the virtual machine will be to free up disk space (the .vswp file is deleted) and merge data from snapshot (with only a single snapshot per virtual disk) in basic disks should not require additional disk space.

  Because the Snapshot Manager doesn't show pictures anymore after the failure of the attempt, you will need to create a new snapshot (to activate the button 'Clear all') and hit use 'delete all '. Because of the size of snapshots, it may require some time to merge data in basic disks, so be patient, even if the GUI user expires!

  André

  PS: Please check that the second VM on the data store does not work on snapshots too, who could fill the data store so that you remove snapshots of the virtual machine in question!

• No mobile data

  Hi all, my 5s iphone works fine for voice calls and wifi but I can not use mobile data. 4g appears and with good resistance.

  I checked the supplier and all is ok, had installed a new sim card, soft reboot, hard reboot as a new phone but still no mobile data. advice will be greatly appreciated

  If it is enabled in

  Settings-> mobile data?