Agilent U2356A Configuration

Similar Questions

• The use of reminders with a USB connected instrument VISA?

  I have a 34972 Agilent connected by USB to a Windows 7 computer. I'm using LabWindows/CVI and VISA drivers.

  I can't find a way to set up a callback that will respond to an alarm on the Agilent event, IE. the Agilent is configured so that certain combinations of signal to generate an alarm (it could be any other event of the instrument-it ends up in the STB registry, similar to that on a GPIB instrument) and I want that my program LabWindows to respond to this event (for example to run a callback routine). With GIPB I ibnotify() etc, but I can't find the equivalent on this combination (USB/VISA).

  Any ideas?

  Hi HDJ

  Have you seen this documentation on how to make VISA event management?

  Events in NI-VISA VISA

  http://www.NI.com/support/visa/vevents.PDF

  At the bottom of page 4 there are some things to consider when you use the callback mechanism. Most important is that you need to install a handler function, viInstallHandler(), before activating the viEnableEvent() event.

  Also, you should notice that she is allowed to have a reminder per session.

  Agilent also have som of information on usage of the event and the reminder here (page 46):

  Agilent IO libraries Suite

  http://www.htest.cz/download/IO_Libraries_Suite_15_visa.PDF

  Best regards

  Anders Rohde

  Technical sales engineer

  National Instruments Denmark

• Agilent 33500 B configuration of duty cycle

  I use the function generator to Agilent/Keysigt 33511 B to produce a square wave with offset, amplitude and frequency specified. However, I'm unable to set the duty cycle. Is there a VI to control this setting?

  Hi jmountney

  If you use this driver , I think that there is a function named .vi configures signals Standard Advanced (square) and it has an entry for the duty Cycle, so I think this could help you.

• Agilent a54845a scope configuration

  Hi all

  I am configuring the Agilent 54845 a scope in LabView. I installed the necessary driver (hhttp://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=E3B19B3E9118659CE034080020E74861) and placed the instrument on LAN. Successfully NI MAX sees the instrument, and I can send commands to the range through the NI VISA test.

  When I try the test "put hp54xx started.vi" LabVIEW present with the driver, then problems arise. I put the correct entry of the IVI (the name of scope recognized by NI MAX) successfully but I can't set option string (the VI runs only in Simulation = 1 mode); If I try to put the Simulation = 0, I get different types of errors, such as:

  1073807339 error has occurred hp548xx read Waveform.vi

  Possible reasons:
  Driver status: (Hex 0xBFFF0015) timeout expired before the operation is complete.

  Otherwise, same with the predefined settings:

  1074135024 error has occurred in hp548xx configuration Channel.vi

  Possible reasons:

  Driver status: (Hex 0xBFFA0010) invalid value for the parameter or property.

  Secondary error: (Hex 0xBFFC0003) parameter 3 out of reach, or an error occurred when setting setting 3.

  Development: range

  Am I facing some known problems? Can it be linked to the fact that I connect via LAN, while the pilot only mentions GPIB?

  Thanks in advance.

  The alternatives are to write your own driver or make changes to existing ones. The others are very viable if you have an understanding of the manual instrument and LabVIEW experience. The query id in the initialize function is a simple string comparison. Have you even looked at the block diagram?

• Agilent N6702A - error in the configuration of Channel 4

  Hi guys,.

  I use Agilent N6700 LabVIEW drivers for the configuration of the instrument. I am able to set up the first whithout 3 channels any problem, but when I try to configure the Channel 4, he throws and error - 222 "" Data Out Of Range '. " I am able to configure Channel 4 physcally on the instrument, but not of LabVIEW.

  

  All the world is facing this problem?

  Any help would be appreciated.

  Kind regards
  Nitz

  Hey guys,.

  I thought kind of the issue myself. Channel 4 was grouped with channel 3, in which case, only the lower layer (ch3) is configurable which inturn will set up the group. Missed me the point that I found in the data sheet.

  Thank you all who have looked into this post and tried to help him.

  Kind regards
  Amine31

• Agilent E5070B: error when using 'configure calibration VI.

  a mistake came during the communications test LAN to the Analyzer of Agilent E5070B network with the "agena Configuration Application Example.vi".

  It seems to me that there is a bug in "agena Configure Calibration.vi" that is called during the execution of the example of vi.

  In my case, it helped change the string declaration of impedance with the declaration of the decimal point:

  old: :SENS:CORR:IMP %lf
  new: %.;:SENS:CORR:IMP %lf
  

  Can anyone tell if this problem is really a problem for all users?

  (or only for users with the German country settings because it is obiously a problem with the statement of the decimal point)

  It is probably a very common problem in all the countries that do not use a decimal separator. I know many deselect the option "Use localized comma" instead of rewriting the pilot.

• Configuration of FlexSync for the Agile plm for process 6.1.1.1.11

  Here are the two queries that we have:

  1. create a new report on the environment:

  We followed the procedure to create a new flexsync report below:

  1. Open the configuration of FlexSync on the application server.
  2. Copy an existing out of integrated report "SingleFormulaPER".
  3. Change the new copied the report in step 2 and provided a name and traveled to the model file that had to be added.
  4. Committed change.

  To approve the changes, we observed that the database entry is made in the table FlexReportFields and FlexReports for the new report that we created.

  After doing this, we've made an entry for the plan of the site - Extensions.xml for the menu item. We are not able to see the name of the new report created in the user interface on the specification of Formulation. It says "no translation is lblbatchsheet. How to build a PKID for the entry in the CommonXLAExtensionCacheItem table and add the question of translation for this new report?

  What are the steps to follow to get this entry available for the user to be able to generate reports?

  2. adding a field to the report:

  We have modified an existing template to add a new column of the effective Date of the Summary tab. We used the name as "Summary.Effective" in the name Manager in excel for this new attribute template.

  After the update the model, we will open the FlexsyncConfig to edit the report, look for the updated model and then commit the changes.

  After that make us this change to the model, when we run the report specification formulation, we are able to see this column added to the report but the value is not getting from the report.

  We found that there is no entry in the FlexReportFields for this new attribute changes. When that we export this report to the FlexSyncConfig SQL code to run the script on database, as we are unable to find this entry in the script.

  These are the fields that must be added to the exiating report:

  Attribute	Spec	Tab	Section
  Density (2 values, 2 unit of MEASURE)	(Exit formula) material referenced	Summary

  Design features

  Starting on (date)

  Formula

  Summary

  Summary

  (Known to contain) allergens

  (Exit formula) material referenced

  Compliance

  Allergens / known to contain

  What are the steps that must be followed to modify an existing template to add/remove fields?

  Using FlexSyncConfig report, in the table fields Editor, if you the si vous la souris mouse click the column of fields on a single line.

  channels section manager updated to display the Manager string associated with this field.  You can then use the

  Manager string the drop down menu to choose what string to associate with the field.

• Agilent ENA s3p file

  I'm looking for something fairly simple to generate a file s3p for my Agilent E5071C Network Analyzer.  I guess my greatest need is to find a way to get scanned data.  At the moment I have just set up the 9 tracks (S11, S12, S13, S21, S22, S23, S31, S32, S33) and then configure my markers and take individual measures.  There must be a way to collect a data table on a bandwidth of a trace.  Anyone know how?  Thanks in advance.

  The problem has been resolved relatively easily on mine as follows:

  Use the VISA Write block to send the following strings:

  • : MMEMorytorusNP:FORMat AUTO
  
  
  • : MMEMorytorusNP:TYPE3 P 1,2,3
  
  
  • : MMEMorytorusNPATA 'C:\filename.s3p '.

  The Agilent ENA Series.lvlib:File transfer from storage Device.vi allows to recover the file from the Network Analyzer and store it in a local file.

  Again, I have no problem to find a solution on my own (obviously), nor do I have problems with a lack of support or answer, however, I have a problem with the comment ironic and demeaning.  Please keep to yourself if you do not have any positive suggestions for those seeking honest suggestions and help on this support forum.  Thank you.

• with Agilent 33522 A data acquisition

  Hello everyone

  When you use the driver NOR-daqmx (for the acquisition of data with agilent 33522A) what material should I use and configure please (map name)

  anything that could help me please

  Thank you

  The cable surrounded in black looks like a USB-GPIB cable. You can use a NI PCI-GPIB and GPIB cable place for as long as you have a PC with an available PCI slot. If you connect via GPIB, you use DAQmx, as Intens said.

• Connection of agilent E3631A DC power supply to the computer via a RS 232 for labview

  Im trying to access the computer via a cable RS 232 for sully power DC E3631A agilent use labview to operate the instrument. But the instrument is now detected by the computer and when I check instruments instruments connected tools-tool-find, told me no device not connected. I tried to use max by changing the configurations, but so far it doesn't work anymore. Please can someone tell me what to do

  I don't know if MAX is the instruments of automatic detection on the serial port.  You can contact the instrument using Hyperterminal or something like that?  Also make sure you serial port settings are all correct (it is the most common reason).

• Scope Agilent MSO6104A and IVI steps

  Hello

  I use scope Agilent MSO6104A that is connected via Gbspecifications FOR.

  I would like to control the scope by following the steps in TestStand IVI (TestStand 4.2).

  I have downloaded the driver 'IVI - COM, IVI - C Version for 5000, 6000, 7000, 546xx 1.3.20.0 series Oscilloscopes' of the Agilent site and installed.

  Agilent IO executable is installed as well.

  The logical name of the instrument is created in MAX.

  Then, I tried to communicate with the scope by TestStand IVI markets.

  I copied the scope of the steps of the sequence of the example.

  IVI step with the 'Init' operation tools works very well.

  But the IVI measures fail.

  For example, 'Configure 1 channel' fails with the following runtime error:

  Details:

  An exception has occurred the call "RunStep" in "ISubstep" of "ZNIUGOL of Types of step TestStand Ivi"
  An error occurred during the execution of the step.
  Error of component control works IVI: IVI configure failed for logical name 'MS06104A '.
  Details: IO error: %1. [IVI. Error Code: BFFA4214]
  Source: TSIviStepTypes

  Error code:

  -32032; User-defined error code.

  NEITHER spy errors also (see the attachment).

  Thanks in advance

  I think you might have more luck if you use the pilot of the IVI-C written by NOR.

• Configuration problem?

  I'm new to Labview. I can't connect with 3458A. It works with 34401. I use a USB/GPIB from Agilent 82357 B interface. I have a VEE program that works with the 3458A. I think I have a driver or configuration problem. I am at a total loss, any help would be appreciated.

  I got it to work with the correct command. Thanks for your help. I have much better understand how this works now.

• Agilent 6812 B power cord does not work with the class IVI driver

  I try to use a power source Agilent 6812 B with class IVI DISARM on RS232 driver.  I have everything set up NI Max but I can't by the initialization routine.  I tried in LabView and LabWindows and nor will not work.

  I decided to follow the lines RS232 RX/TX and I see that he is sending the "* IDN?" command and it times out before receiving a response.  Unfortunately, it does not send the Terminal newline at the end of the string.  I can cross NI MAX and send "* IDN? \n' and he responds with the ID very well.

  So my question is, would be possible that the IVI specific driver is not written correctly to send a jump as an end of line character or do I need to configure the Compote to send this character separately?  The IVI driver has been downloaded from instrumement network driver of NOR and it says it is compatible with the 6812B, but has been tested with 6813B.

  
  

• Connection of GPIB USB HS TWO agilent instrument (power)

  Hello

  I'm fighting to control two power supplies (E3631A) Agilent using GPIB USB HS connection.

  But they are not detected as TWO different power supplies regardless of STAR or linear connection.

  However, when I try to set up a power source and a Tektronix oscilloscope, they are considered TWO different instruments.

  Single power supply control is also OK.

  So, I'm wondering how to set up TWO power supplies.

  I enclose the code VI to not control than a single power supply and want to extend to the version of the two instruments.

  you have configured the power to two addresses different gpib?

  This is needed!

• Configure N9010A attenuation in mode EPI

  Hello

  With CVI 2009 IVI Driver for the Agilent N9010A, I'm measuring spurius...

  in order to better search criteria, I need to apply the attenuation of 0 dB to the instrument.

  I can't find the API related to the mode of the SPUR and mitigation and the APU 'agmxa_ConfigureElectricalAttenuation' in the Setup menu only apply to the

  SCAN mode.

  any suggestions?

  Cordially Ofir

  Hello ofirga,

  I downloaded the IVI driver for the device you specified and noticed a few function calls from the IPS Configuration. I found these slot tree library instrument under Configuration > measurement Setup

  

  Hope that helps!