AIM-VPN/SSL-2 facility in Cisco 2821

Similar Questions

• Module AIM-VPN/SSL-2

  Does anyone know if the GRE tunnels can be used with the AIM-VPN/SSL-2 module for the Cisco 2800 series routers?

  Yes, we use it with GRE/IPSec.

  Hope that helps.

• License of Cisco 2821 VPN IpSEC

  Hello

  I have a small problem, a do give me a Cisco 2821 for installing a VPN client to a small local network.

  I don't have problem to the router connection, but when I try to set up an ipsec i cant.

  We have need of a license or a module installation IpSe VPN?

  When I run this command, the router does not include:

  vpnbog1 (config) #crypto isakmp policy 1

  ^

  Invalid entry % detected at ' ^' marker.

  vpnbog1 (config) #.

  the show version is:

  January 3, 21:12:49.219: % SYS-5-CONFIG_I: configured from console by admin on consoleversion

  Software (fc2) SOFTWARE VERSION, Cisco IOS, 2800 Software (C2800NM-SPSERVICESK9-M), Version 12.4 (3i)

  Technical support: http://www.cisco.com/techsupport

  Copyright (c) 1986-2007 by Cisco Systems, Inc.

  Updated Thursday 28 November 07 21:09 by stshen

  ROM: System Bootstrap, Version 12.4 (13r) T, RELEASE SOFTWARE (fc1)

  vpnbog1 uptime is 1 hour, 32 minutes

  System to regain the power ROM

  System restarted at 14:40:43 PCTime Friday January 3, 2014

  System image file is "flash: c2800nm-spservicesk9 - mz.124 - 3i.bin".

  This product contains cryptographic features and is under the United States

  States and local laws governing the import, export, transfer and

  use. Delivery of Cisco cryptographic products does not imply

  third party approval to import, export, distribute or use encryption.

  Importers, exporters, distributors and users are responsible for

  compliance with U.S. laws and local countries. By using this product you

  agree to comply with the regulations and laws in force. If you are unable

  to satisfy the United States and local laws, return the product.

  A summary of U.S. laws governing Cisco cryptographic products to:

  http://www.Cisco.com/WWL/export/crypto/tool/stqrg.html

  If you need assistance please contact us by mail at

  [email protected] / * /.

  Cisco 2821 (revision 53.51) with 251904 K/K 10240 bytes of memory.

  Card processor ID FTX1213A06Y

  2 gigabit Ethernet interfaces

  2 FXS voice interfaces

  Configuration of DRAM is wide with parity 64-bit capable.

  239K bytes of non-volatile configuration memory.

  62720K bytes of ATA CompactFlash (read/write)

  You are tuning a "spservices" image that has no crypto code compiled (AFAIR, feel free to doublecheck).

  You would need advanced security or advanced IP services have together.

  http://www.Cisco.com/en/us/prod/collateral/routers/ps5853/images/0900aecd80524a07_null_null_null_07_19_05-1.jpg

  M.

• Problem starting the Cisco 2821 router

  Hello world

  I have cisco 2821 router. I am facing problem starting.

  someone suggest me what is the problem.

  Thanks in advance...

  VERSION of the SOFTWARE system Bootstrap, Version 12.4 (13r) T, (fc1)
  Technical support: http://www.cisco.com/techsupport
  Copyright (c) 2006 by cisco Systems, Inc.

  The ECC memory initialization
  .
  C2821 platform of 262144 KB of main memory
  Main memory is configured for 64-bit with ECC active

  ReadOnly initialized ROMMON
  load complete, point of entry to the program: 0x8000f000, size: 0xcb80
  load complete, point of entry to the program: 0x8000f000, size: 0xcb80

  load complete, point of entry to the program: 0x8000f000, size: 0x26bc2cc
  Decompression of self-image: #.
  ################################################################################
  ################################################################################
  ################################################################################
  ################################################################################
  ################################################################# [OK]

  Smart init is enabled
  Smart init is sizing iomem
  MEMORY_REQ TYPE ID
  0003E8 0X003DA000 C2821 Mainboard
  1A 0X0025178C E3 0001AB
  0X00263F50 VPN on board
  0X000021B8 embedded USB
  Swimming pools public buffer 0X002C29F0
  Swimming pools public particle 0 X 00211000
  TOTAL: 0X00D65284

  If all memory conditions above are
  "UNKNOWN", you could use a non supported
  configuration or there is a software problem and
  the system may be compromised.
  Rounded IOMEM to: 14 MB.
  Using iomem of 5 percent. [14 mb / 256Mb]

  Legend restricted rights

  Use, duplication, or disclosure by the Government is
  subject to such restrictions as set out in paragraph
  (c) Commercial - limited computer software
  The rights to FAR clause 52.227 - 19 and subparagraph s
  (c) (1) (ii) rights to technical and computer data
  Clause of DFARS 252.227 - 7013 section software.

  Cisco Systems, Inc.
  170 West Tasman Drive
  San Jose, California 95134-1706

  Cisco IOS software, 2800 Software (C2800NM-ADVIPSERVICESK9-M), Version 12.4 T7 (9)
  Version of the SOFTWARE (fc3)
  Technical support: http://www.cisco.com/techsupport
  Copyright (c) 1986-2008 by Cisco Systems, Inc.
  Last updated Friday, January 10 08 16:35 by prod_rel_team
  Image text-base: 0x400B1E74 database: 0x434A9AC0

  ERROR detected on Bus PCI1
  Try REINSTALLING all the modules in the system
  pci1_int_cause 0 x 00000240,
  pci1_err_addr 0 x 00091009, pci0_err_cmd 0x0000000A
  PCI Master Read parity error
  Abort target PCI

  R0 = r1 = r2 FFFFFFFF FFFFFFFF = 0 r3 = 45 80000 r4 = 0
  R5 = 303 r6 = 0 A7 = 1 = 0 = 100000 r9 r8
  R10 = 0 r11 = 465E4369 r12 = 0 r13 = 465E436A r14 = 0
  R15 = r16 r17 8 = 0 = C100 r18 = 0 r19 3400 101 =
  R20 = r21 0 = 40096828 r22 = FFFFFFFF r23 = r24 FFFF00FF = 0
  R25 = 469AAC64 r26 = 0 = 469AAC60 r28 = 0 = 469AAC5C r29, r27
  R30 = 0 r31 = 469AAC58 r32 = r33 FFFFFFFF = r34 = FFFFFFFF FFFFFFFF
  R35 = r36 = r37 = r38 = r39 FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF = FFFFFFFF
  R40 = FFFFFFFF = FFFFFFFF = FFFFFFFF = FFFFFFFF r44 r43 r42 r41 = FFFFFFFF
  R45 = r46 = r47 = r48 FFFFFFFF FFFFFFFF FFFFFFFF = r49 0 = 469AACD0
  R50 = 0 0 = 0 r53 r51 = r52 = 3040A 801 r54 = FFFFFFFF
  R55, r56 = FFFFFFFF = FFFFFFFF r58 r57 A000F000 = = 0 = 465E4358 r59
  R60 = r61 = r62 FFFFFFFF FFFFFFFF = r63 = 0 402E4B10
  GENS = 3400 103 mdlo_hi = my 0 = 251 00
  mdhi_hi = 0 = 0 badvaddr_hi = FFFFFFFF mdhi
  BadVAddr = cause = epc_hi 0 = FFFFFFFF FFFFFFFF
  EPC = 402E4B08 err_epc_hi = err_epc FFFFFFFF = FFFFFFFF

  ERR-1-FATAL %: interruption of the fatal error, reload
  err_stat = 0 x 0

  = Posts from Flushing (02: 37:51 UTC Wednesday, may 18, 2016) =.

  Messages in queue:

  02:37:51 UTC Wednesday, may 18, 2016: interrupt exception, signal CPU 22, PC = 0 x 0

  --------------------------------------------------------------------
  Software fault possible. On reccurence, you perceive
  crashinfo, 'show tech' and contact Cisco Technical Support.
  --------------------------------------------------------------------

  -Trace =
  $0: 00000000, AT: 00000000, v0: 00000000, v1: 00000000
  A0: 00000000, a1: 00000000, a2: 00000000, a3: 00000000
  T0: 00000000, t1: 00000000, t2: 00000000, t3: 00000000
  T4: 00000000, t5: 00000000, t6: 00000000, t7: 00000000
  s0: 00000000, s1: 00000000, s2: 00000000, s3: 00000000
  S4: 00000000, s5: 00000000, s6: 00000000, s7: 00000000
  T8: 00000000, t9: 00000000, k0: 00000000, k1: 00000000
  GP: 00000000, sp: 00000000, s8: 00000000, ra: 00000000
  EPC: 00000000, ErrorEPC: 00000000, GENS: 00000000
  MY: 00000000, MDHI: 00000000, BadVaddr: 00000000
  CacheErr: 00000000, DErrAddr0: 00000000, DErrAddr1: 00000000
  DATA_START: 0X434A9AC0
  Cause 00000000 (Code 0 x 0): Exception of interruption

  Writing crashinfo in flash: crashinfo_20160518-023752
  No reboot to warm storage
  System received a system error *.
  signal = 0 x 16, code = 0x0, context = 0 x 46905718
  PC = 0x40096d7c, Cause = 0 x 20, State Reg = 0 x 34008002

  Software Cisco IOS, 2800 Software (C2800NM-ADVIPSERVICESK9-M), Version 12.4 (9)T7
  Version of the SOFTWARE (fc3)

  OK, the router is running on a train of "T".

  ERROR detected on Bus PCI1
  Try REINSTALLING all the modules in the system
  pci1_int_cause 0 x 00000240,
  pci1_err_addr 0 x 00091009, pci0_err_cmd 0x0000000A
  PCI Master Read parity error
  Abort target PCI

  Remove any all NM/NME or WIC/HWIC cards and restart again.  If the router is able to start properly, upgrade the router to a higher version.  DO NOT use another "T" train if it is needed.  Use instead a train of "M".

• WebVPN and remote vpn, ssl vpn anyconnect

  Hi all

  Differences between webvpn and remote vpn, ssl vpn anyconnect
  All require a separate license?

  Thank you

  Hello

  The difference between the webvpn and SSL VPN Client is the WebVPN to use SSL/TLS and port

  send through a java application to support the application, it also only supports TCP for unicast traffic, no ip address

  address is assigned to the customer, and the navigation on the web in the tunnel is made with a SSL

  Web-mangle that allows us stuff things in theSSL session.

  SSL VPN (Anyconnect) Client is a client of complete tunneling using SSL/TCP, which installs an application on the computer and

  envelopes vpn traffic in the ssl session and thus also an assigned ip address has the

  tunnel's two-way, not one-way.   It allows for the support of the application on the

  tunnel without having to configure a port forward for each application.

  AnyConnect is a client of new generation, which has replaced the old vpn client and can be used as long as the IPSEC vpn ssl.

  For anyconnect licenses please see the link below:

  http://www.Cisco.com/c/en/us/TD/docs/security/vpn_client/AnyConnect/ANYC...

  Kind regards

  Kanwal

• How Anyconnect VPN users will connect with cisco ASA, which uses the server (domain controller) Radius for authentication

  Hi team

  Hope you do well. !!!

  currently I am doing a project which consists in CISCO ASA-5545-X, RADIUS (domain controller) server for authentication. Here, I need to configure Anyconnect VPN and host checker in cisco asa.

  1 users will connect: user advanced browser on SSL VPN pop past username and password.

  2. (cisco ASA) authentication: VPN sends credentials to the RADIUS server.

  3 RADIUS server: authentication: receipt and SSL VPN (ASA) group.

  4 connectivity creation: If employee: PC so NAW verified compliance, no PC check Assign user to the appropriate role and give IP.

  This is my requirement, so someone please guide me how to set up step by step.

  1. how to set up the Radius Server?

  2. how to configure CISCO ASA?

  Thanks in advance.

  Hey Chick,

  Please consult the following page of installation as well as ASA Radius server. The ASA end there is frankly nothing much difference by doing this.

  http://www.4salesbyself.com/1configuring-RADIUS-authentication-for-webvp...

  Hope this helps

  Knockaert

• 2611XM w / AIM-VPN/EP

  I'll implement router-to-router IOS VPN using the 2611XM VPN, which includes a map AIM-VPN/EP. The tool Advisor software of Cisco, the minimum version of the software supported by train for this card are: 12.2 (11) YT, ZJ 12.2 (15), 12.3 (1). I'm having a hard time waking up the concept of "minimum version". Does that mean I can't run 12.2 (15) T5 ZJ train coming from? Has anyone else successfully run module AIM-VPN/EP on a different version code?

  Do not know what is happening with the SW consultant, but the AIM-VPN/EP has been supported since 12.2 (8) T1, so you could certainly run 12.2 (15) T with it.

• setting up a vpn ssl to a netgear router

  I have setup a router netgear FVS336G at a customer and you have configured a vpn ssl to the customer. I can cinnect on a win xp machine, but not on my machine which is running Vista 64 bit. I get narrations of error message cannot install the vpn tunnel.

  Hi Jluequi,

  The issue of Windows 7 you have posted is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 networking forum.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to create a VPN file .pcf for the CISCO VPN CLIENT software profile

  Dear all

  How to create a VPN file .pcf for the CISCO VPN CLIENT software profile

  Concerning

  Hi Imran,

  Can't do much about that because it depends on what authenticate you the VPN server and how the settings. But let me introduce you to the memory layout. Once you install and open a VPN client. Press it again and it opens up a new page for the VPN config.

  Example of configuration as it is attached. But it differs depending on the configuration of your vpn server.

  Once you create and save this profile. Your FCP file is stored.

  Please assess whether the information provided is useful.

  By

  Knockaert

• 3005 & customer VPN SSL gone?

  I upgraded from 2 3005 to vpn3000 - 4.1.7.Q - k9... after that my SSL VPN client options are gone, used to be: Configuration | Tunneling and security | WebVPN | VPN SSL Client...

  This get removed from the latest releases and now I only have the mode of transmission by SSL VPN proxy on of the 3005? Can't seem to find it in the release notes...

  Razor head

  The problem you are having is due to the upgrade to 4.1. *, which is not the software package you need. You were previously using 4.7. *, which is the right one for SD/SVC.

  Ken

• MODULE AIM-VPN/EP of C2621 in C1841?

  Hello

  For some tests in my lab, I ordered a Council AIM-VPN, on e - bay they guy told me that it works in a C1841.

  When compared to the one I have in my error C2621, they have equal air.

  On the two pcb I can read: CN6I280AAA

  When I put it I get this:

  Smart init is enabled

  Smart init is sizing iomem

  MEMORY_REQ TYPE ID

  Swimming pools public buffer 0X003AA110

  Swimming pools public particle 0 X 00211000

  0002A 0 AIM UNKNOWN

  Pools of crypto module 0 x 00020000

  0X000021B8 embedded USB

  You do that the card works?

  Thank you for your help.

  Best regards

  Didier

  Didier,

  Can you please join out of:

  -show the worm

  -show diag

  -show inv

  -See the logg (if after start)

  -show crypto eli

  -See the cryptographic engine config

  Let's see what is the name of the beast ;-)

  Marcin

• Problem loading AIM-VPN/HPII on C3745

  I tried last main line and T form without success.  Get the following errors on both 3745 identical routers with 2 identical modules of PURPOSE:

  on the 12.3

  * 00:01:07.419 Mar 1: % VPN_HW-1-INITFAIL: Slot 1: No. ACK for order.., 0 x 80000000(50000 ms)

  * 00:01:07.419 Mar 1: % VPN_HW-1-INITFAIL: Slot 1: do mini_omq failed: 00180010

  * 00:01:07.419 Mar 1: % VPN_HW-1-INITFAIL: Slot 1: firmware download failed

  on 12.4

  * 00:01:09.995 Mar 1: % VPN_HW-1-INITFAIL: Slot 1: No. ACK for order.., 0 x 80000000(50000 ms)

  * 00:01:09.995 Mar 1: % VPN_HW-1-INITFAIL: Slot 1: do mini_omq failed: 00180010After mbox fail:

  * 00:01:09.995 Mar 1: base address register is: 3 A 800000

  * 00:01:09.995 Mar 1: versionid = 00140002

  Any suggestion would be appreciated.

  Module AIM location: 1

  Hardware revision: 1.0

  Number of albums part together: 800-18028-01

  Review Board: C0

  Deviation number: 0-0

  Fab Version: 03

  Serial number of PCB: FOC08101AN8

  History of the RMA tests: 00

  RMA number: 0-0-0-0

  RMA history: 00

  Product number (FRU): AIM-VPN/HPII

  Version identifier: v01

  EEPROM 4 format version

  Table of contents EEPROM (hex):

  0 X 00: 0 B 04 FF 40 03 41 01 00 C0 46 03 20 00 46 01 6

  * 00:01:09.995 Mar 1: % VPN_HW-1-INITFAIL: Slot 1: No. ACK for order.., 0 x 80000000(50000 ms)
  * 00:01:09.995 Mar 1: % VPN_HW-1-INITFAIL: Slot 1: do mini_omq failed: 00180010After mbox fail:
  * 00:01:09.995 Mar 1: base address register is: 3 A 800000
  * 00:01:09.995 Mar 1: versionid = 00140002

  DRAM, to check if the modules of memory have a different ability, I have encountered this problem.

• ASA AnyConnect VPN SSL

  I have already set up site to site vpn asa.

  Now, I want to create asa ssl AnyConnectVPN.

  Please help me with the configuration for all VPN connection?

  Configuration VPN SSL Clienless already on our asa

  "If I try to access to, the error is.

  Opening of session

  Connection refused. Your environment does not respect the terms of access defined by your administrator.

  Please notify this error for me. I changed the username and password may also.

  Thank you

  Aung

  Hey Aung,

  It's the best way to get rid of this message:

  WebVPN

  No csd enabled

  !

  dynamic-access-policy-registration DfltAccessPolicy

  action continue

  The reason why you see the message is because you have a dynamic access policy refuse your connection, because your system does not meet the requirements.

  HTH.

  Portu.

• How to connect to the CISCO VPN server without using the CISCO VPN client (from dialog Windows VPN)

  Hello world

  I have a cisco router 2800 installed in our company
  and I have it configured as a VPN server for professional help (cisco configuration)
  with the ease of the VPN Server Wizard
  Can I connect to this server using windows XP or 7 dialog VPN?

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers community. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Forum. You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  I hope this helps!

• Customer VPN SSL IOS on Vista

  Hello

  I've implemented a SSL VPN on a 877 router. It has been tested with an XP laptop. Now, the laptop has been formated in Vista and I get this error "Setup could not start the Cisco Client SSL VPN.

  For more information, contact your COMPUTER administrator. Click here to log out. »

  I watched some old news, and it seems that in the past, client SSL VPN will not work under Vista. However, that display was quite old.

  Someone at - he managed to make it work on Vista?

  I had exactly the same problem outside my router is a 2811.

  The Cisco SSL VPN client is not supported on any taste of Vista - you must upgrade to the Anyconnect client.

  I used the anyconnect-victory - 2.3.0254 - k9.pkg

  I also found that SDM does not recognize this as a valid client SSL so in order to install I did the following via the CLI

  1 tftp flash the router package

  2 uninstall the existing customer with

  No webvpn install svc flash:/webvpn/svc_1.pkg sequence 1

  3. install the new package with

  WebVPN install flash: anyconnect svc - win - 2.3.0254 - k9.pkg

  After that I reconnected it my broken vista client and it worked like a charm.

  As well, as I was running 12.4 (20) T I am now able to use the anyconnect offline client - that is, I don't have to log in via a browser.