AIO 962 Windows 10

Similar Questions

• Cable Dell AIO 962 printer USB communicates only with my 64-bit Windows 7 PCs

  I feel I've done everything I can to get my dell AIO 962 Printer to work on my 64-bit windows computer 7. I even bought another thought of UBS cable that could be the solution. I have the compatible driver download and when he invites me to connect the USB cable from the printer to the computer, and I don't... Nothing is happening and I'm not able to complete the driver installation. Help please!

  Rick,

  So I uninstalled IE11. Then I tried to reinstall the driver, but when he says to plug the USB cable into the computer, there was still no communication between the printer and the computer.

• Error while printing in Dell AIO 962-"Microsoft Visual C++ Runtime Library Runtime Error"

  Original title: runtime error
  Microsoft Visual C++ Runtime Library

  Runtime error

  C:\\Program Dell Photo All in One Printer 962\dlbxmon.exe

  This application has requested the execution in an unusual way. Contact the application support team.

  This prevents me from using my Dell AIO 962 printer

  Hello

  Remove the printer completely and then reinstall.

  Step 1:

  Follow these steps to remove the printer:
  a. click "Start," then "printers and faxes".
  b. when the "Printers and faxes" window appears, right-click on a printer and choose 'delete '.
  c. confirm when prompted.

  Note delete a printer cannot remove additional drivers and/or software support required for the operation of the printer. You may need to manually remove the software:

  Step 2: uninstall the printer software.
  a. click on 'Start' and then 'control panel '.
  b. choose "Add or Remove Programs".
  c. If indicated, select your printing software and drivers and choose ' Change/Remove '.

  Step 3:
  Connect the printer and download drivers XP from hereand install the drivers.

  If nothing helps, so please get in contact with Dell support for further assistance.

  Dell technical support

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• XPS 730 x company vista plug-and-play does not recognize the dell aio 962 printer

  XPS 730 x company vista plug-and-play does not recognize the dell aio 962 printer

  It is usually best to install the drivers before connecting the printer. Use the printer installation disk, if you have one, or follow the procedure here:

  http://support.Dell.com/support/topics/global.aspx/support/DSN/en/document?c=us&l=en&s=Gen&DN=TT1092882

• Dell AIO 962 problems with Windows 7

  I had the printer runs fine on Vista and upgraded to Windows 7. Now, it does not print the test page, however - the scanning part works fine. How can I get the impression in working order?

  Hello Rainer fuerst,

  Thank you for your message.  Unfortunately, Microsoft lists your printer as 'Not Compatible' with Windows 7 (as seen HERE).  Some have had success using Vista drivers for different models, but there is no guarantee that it will work for you.  I guess that you already use the Vista driver to get the copy and scan functionality.  However, if you want to install the Vista driver, you can click HERE to download/install.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Dell Photo AIO 962 Printer does not print. Running a Dell Dimension 8400 CPU, with the Windows XP platform.

  Problem with printer does not print.

  I tried to uninstall and reinstall the printer drivers; Did not work.  Tried to start your Virtual Tech; He said that he could not solve the problem; and to communicate with you, dear friends!  I need help... I don't know what else to try.  Eddir

  I also need to recover the files of the program: dlbxcnv4.dll; dlbxmon.exe; and dlbxaix.exe.  because of the "runtime error".

   

  Hi eddir,.

  I suggest to reinstall the Dell printing software to see if the problem is resolved.

  Which should reinstall the DLL files you are looking for as well.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot install my printer [DELL PHOTO AIO 962]. is there any othe with mine. thank your driver options, because I do not have the disc.

  of all the available for installation, photo dell AOI 962 dell printer is not.are he other options or made on the liost who would be compatible

  VV_907,

  First run, delete print jobs to eliminate any print job stuck in the queue.

  Unplug the printer.

  Download and run the patch (cleaning printer utility) until it prompts you to restart your computer.

  Restart your computer. Make sure that the printer is deleted. Deleting Manual printer driver

  Download the 32-bit drivers for Vista for Windows 7 32-bit or 64-bit drivers for Windows 7 64 bit Vista. Install the Vista drivers in Vista compatibility mode, you will get a message, the printer is not connected. Connect the printer at the moment (power on).

  You will find links to the patch/drivers to...

  Reference Dell 966 Photo all-in-One Printer owners thread (W7)

  Don't forget the programs anti-virus and firewall will block communications.

  Rick

• HP J4680 AiO: HP J4680 AiO and Windows 10

  Installed 10 Windows from Windows 7, installation went well, with only two points.

  HP is my printer/scanner HP J4680 AiO will print but not scan more solutions center program comes with a white screen.   I followed the instructions given to Brian in the previous post.

  -authorized temporary folder

  -installed v14.8.0 hp full feature software and drivers

  The printer works well (do not fax set up system have) but the scan does not work.   When I try to use the solution Center, I get a white screen.  Right-click on the screen and the compatibility test running can do nothing.

  System has worked in Win 7, but not win 10.

  Just to try a work-around, I tried running Win fax and scan and received the message... cannot communicate with the documents folder.

  Suggestions?

  Thanx

  Hi, after contacting Richard Bradley, HP VP, he put me incontact with a live support person.     Bottom line after trying to install the HP J4680 AIO we have determined that the drivers are not available in Windows 10, also that the application of scanning and Capture will not work effectively either.   Part of the J4680 printer will work but not the scanner.    After reviewing several other brands, I see that the same thing is happening with their current printers / alumni.   The HP representative said that new pilots could come out in October until January.

  So I decided to go back to windows 7 which was easy, there is an application in the control panel.  Once there I still had the same problems with the printer, so I deleted all the programs of HP printer, turned off the firewall and antivirus program (do this first, incidentally).  I had try to install and remove several times but after several hours was able to get the printer works as it should.

  I'll wait 10 windows drivers may be available.

  After writing to Mr. Bradley, a response was quick and the accompaniment of the victim has been most helpful and knowledgeable.  I had criticized HP and their market after service, but frankly, I was impressed by this gesture.

• PhtoPrint Dell 926 AIO and Windows 10

  Hello-

  I am posting this for a neighbor who called for assistance with this printer very old.  It uses your desktop Acer Veriton wireless connection at his home router.

  It was on Windows 7 Home and the printer worked very well.  He bit on the free Windows 10 Home can offer upgrade of Microsoft and went through.  It's about 1 month and a half ago.  The AIO 926 actually worked very well under Windows 10 Home 64 bit without user intervention, according to him.  Then one day last week, the printer stopped working and that's where I got.

  I know there are a lot of articles and posts here with RockStar Rick K is heavily involved.  I read the most before going to his house.  So, I took a quick glance to the queue to print the Windows user interface.  He had two jobs in the queue with the top of the front page showing 'Error' and the second showing "sent to the printer.  I have cleared both by using the Windows user interface. I then unplugged the printer to the USB port and also off it.  I unplug the power cable from the wall.  Let stand 5 minutes then pressed and held in the power button to erase the bad karma.

  I then ran the printer queue script permission.  No errors.  I tried to run printer removal utility.  Let him ride for a good 45 minutes with the sign "Please wait...". ».  After that long task was always to 'Running' poster, but I didn't trust that.  I killed him to this place.  Now, here's what I don't know.

  Use the set of drivers Vista 32 bit?  I tried and extraction & implemented crossed.  I see only the driver scanner in devices and printers.  Ok.  Connected the printer to the power.  Was left unplugged USB port.  At the printer.  Plugged in USB then and of course the printer showed in printers and devices as well as the scanner set previously.  Software Dell will print its own test page.  But the printer has a yellow exclamation mark on it and on hover Windows reports "Driver is unavailable".  So that failed.

  Use the Vista 64 bit driver set?  Check the print queue and the Windows Test Page shows "Printing error" and I erased only through Windows.  I have re-directed the Dell printer clean utility.  Once again a long long wait (I went to lunch) and came back to this same panel "Please Wait".  Because I didn't know how long to let it run again, I killed him.  At least half an hour.  Disconnected USB printer and the wall.  Then, I downloaded and run the 64-bit set of drivers for Vista.  Yet once, it crosses looking like it installed correctly.  Printers and peripherals shows the scanner only - I think that's normal.  Printer media leave for 5 minutes.  Key for 10 seconds. Printer back up, looks very good.  Introduced the USB printer.  After a few moments checking printers and devices and the printer upwards, but once again with a yellow exclamation point and hover shows "Driver not available.

  What is the assessment here?  What hurts and what I can change in terms of the sequence of the application of this set of drivers or software?  And more importantly, which one should I use: 32 or 64 bit?

  Hoibie

  With 10 windows and the Dell AIO 966, I was able to print test pages but nothing else. While the I'll still get protection faults trying to reach the printer properties, initially cancelling the warnings and to decline the invitation to install the driver (again), I finally get to the properties of the printer. By selecting the 'Advanced' tab, the default setting for the print processor was "GLT", so I changed it to "NT EMF 1,008" and it prints very well. " Still some problems with rundll32.exe errors, but now they are a nuisance, but otherwise everything works.

• 4700 series AIO and Windows 7 (32 bit)

  Just bought a C4780 AIO because it was supposed to be compatible with Windows 7. The bottom line... the software on the download section of the HP Web site will not be installed. It will start to install but it goes just in a loop, stalls and that's all. I tried almost everything. The software is for Windows XP, Windows Vista & Windows 7, I tried to disable UAC, run as ADMIN, safe mode & compatibility mode. The only way I got this thing to work is simply by adding printer and used the drivers that I downloaded. It will print but forget using print wireless function. I have disabled all anti-virus and vaious other things, no chance, not going just in a loop control system, apply updates, at the beginning, then audit system etc etc.

  Well... Finally got this figured out. A number of things you need to do: turn off the antivirus... During the beginning of the dialog box install a box provides some links to configure updates etc. Make sure that you disable all update options... Installation will continue but may pick up, move the current install of the road window and click "OK" about Adobe Flash Player. Everything began to work, including wireless printing. Set up my daughters computer to print wireless, worked great.

• Reference Dell 968w AIO and Windows 8

  My dell 968w AIO will not print I've tried the drivers downloeading and it says there is not supported the printer appears in the folder because there is no "host usb controller" in the bottom list. It's a new laptop and a new system but old printer how to communicate?

  Hi melrose15,

  The 968W AIO printer is not compatible with windows OS 8.

  Please click here to check the compatibility of printers: http://dell.to/170M3BP

  However, try to install 64-bit of Windows 7 in compatibility mode on Windows 8 computer drivers by following the listed below as follows:

  Click on this link: http://dell.to/155CQMe

  Click on the downloaded file, and then save the file to the desktop. right click the drivers file, left click on properties and compatibility of the left click. Change the compatibility based on the drivers / software you are trying to install (if the drivers/software is Windows 7 64 bit, then try using 8 64-bit Windows). Then right-click on the drivers, on the left, click Run as administrator.

  Note: Do NOT check the box run this program as an administrator and do not connect the printer to the computer before installing the drivers.

  Please post the results.

• Reference Dell aio 962 printer suddenly stops and flashes "left cartridge incorrect".

  While the printer is working correctly, all of a sudden for no reason apparent stops and flashes "LEFT CARTRIDGE INCORRECTE. All attempts to address this problem have failed. Use the cartridge Dell XL Black series 5. Another cartridge change has no effect.

  Please advise as soon as POSSIBLE.

  Contact Dell, as the printer indicates a kind of hardware failure, it will not be a Windows fix for it.  Go to Dell web and some pilots and support, enter your printer model number and go from there.

• OfficeJet Pro L7680 AIO: OfficeJet Pro L7680 AIO DRIVER will be available for Windows 10?

  (NOTE: you don't list Windows 10 64-bit under the above operating systems.)

  I have an OfficeJet Pro L7680 AIO running Windows 7.  It has been a wonderful printer.  (I started to work on printers in 1966, so I have some experience with them).  Its quality and reliability have been superb.

  When I "upgraded" to win 8, I found that no driver was, so I bought a new HP AIO, but its controls were so poor and hard to see that I returned it immediately.   Then I returned to Windows 7, a good solid o/s.

  Now, I'm thinking 'redevelopment' of Windows 10.  I had assumed that no driver for my L7680 would be available, but I read somewhere that one became available for Windows 8.1 (?)

  My question is: a driver Windows 10 will be available for my excellent L7680 AIO?   Or do I have to stay on Windows 7 to use it?

  Windows 10 is not quite finished yet, is not clear what will be included.  (Last week there were three versions of the builds on the fast ring.)  The last public version includes a printer HP Officejet Pro L7600 Series driver.

  Page www.hp.com/go/windows10upgrade no details, but said toward the end of July for more information on what will be officially supported in Windows 10.

• HP Pavilion 23 AiO need USB 3 Driver for Windows 7 Pro 64-bit

  Hello

  I need driver USB for HP Pavilion 23 AiO for Windows 7 64 bit. I tried to install the chipset and USB drivers on the HP driver Web site, but he says that I don't have perfectly meets the requirements for installation?

  Hardware ID

  PCI\VEN_1022 & DEV_7812 & SUBSYS_2AEE103C & REV_03
  PCI\VEN_1022 & DEV_7812 & SUBSYS_2AEE103C
  PCI\VEN_1022 & DEV_7812 & CC_0C0330
  PCI\VEN_1022 & DEV_7812 & CC_0C03

  OK, so I'm done fixing this problem. Because there, anyone having the same problem as me, here is how I did it.

  Assuming that you are trying to install the USB 3 on Windows 7 64 bit drivers...

  1. go here and download the Original Texas Instruments USB controller driver

  2. before executing the downloaded file (sp57875.exe), click on Start/Run then type folder and press ENTER.

  3. run the executable file (sp57875.exe). You will notice the content excerpt in the TEMP directory % opened in a randomly named folder.

  4 copy the entire folder on your desktop and then cancel the rest of the installation.

  5. go into your configuration/system control panel and Device Manager/security

  6. right click on the USB controller in Device Manager and click on Update driver software...

  7. click Browse my computer for driver software

  8 go to the desktop where you put the TEMP folder and select the src directory

  This should do the trick. I had to repeat 6,7,8 for all USB drivers that were not installed correctly. You can get a uknown device show up once you apply the first installation, just repeat steps 7,8,9 on the unknown device and it will install the USB 3.0 hub.

  I hope this helps.

• 5150 Windows 8 network printing

  I have a new HP AIO running Windows 8.1 and want to print on a Deskjet 5150 connected to an XP machine (on the network).

  First of all - if I use Windows 'printer' Add dialog box shows the network printer in the flat view and then I select him and it purrs away for a while and said his "connection to HP 5150 on...» ", after much checking Windows Update, he said"no driver found ".

  In the same dialg box there is an option to install the driver manually, after which he wants one. INF file. So I point to various HP 5150 driver downloads Windows, Vista, full XP, XP 8.1 a minimum and he do not like one of them.

  Second - if I use the HP Windows 8.1 Deskjet 5150 driver and check the "my printer is already configured for use on the same network as my computer", after much soul search (and probably printer hunting), until appears a dialog box saying that 'no network device found ". Well we can't try too hard too stupid little more sees me the shared network printer-5150.

  Third, I put some time in the search on the internet and to this day, I found not anyone who tries to do. I don't want to put the 5150 on Win8 machine because of the desktop environment.

  Anyone?

  Try to set up as a local printer 5150 on Win8 computer.

  Add a printer
  Add a local printer
  Select create a new port:
  Select Local Port for the port Type:
  Enter the name of the network to the XP computer that is. \\XPcomputername\printerid
  Install the 5150 driver when prompted