Air 21.0.0.215 on iOS9 redirect url load never completed

Similar Questions

• APEX 5 - bug Builder link when the action is redirect URL

  Hello

  I noticed a strange behavior of the designer of the Page - link generator when the action is redirect URL.

  When I try to make a link to the request URL to report who is in form f? p = & APP_ID.:0 : & SESSION. : PRINT_REPORT = REPORT_NAME value is stored without problem.

  After that when I click on the target to change the URL there is no display.

  If you want to see URL previously entered, the solution is to switch from Page Designer component mode.

  Is this a feature or a bug?

  Hello

  Thanks for reporting this.

  I think that this reproduced only for the buttons, can you confirm that you were testing a link to a button?

  And it is indeed a bug, where the button of "redirect url" action starting by ' f? p' load a value zero in the dialog link (filed bug #21517098 to follow it). Although it is a bug, it must be said that in the case you cite, I believe that this should rather be defined as an action to the button "Redirect to the page of this application", where you define just page = 0 and demand (in advance) as 'PRINT_REPORT = REPORT_NAME'. Which works very well in 5.0 and is easier to set than the raw URL.

  Kind regards

  Anthony.

• Redirect URL with a slash at the end does not work

  I have a url for example www.example.com/test/ and I want to send to www.example.com/blog/test but it does not work because the url of the source is not save in the redirect url because of the slash at the end.

  Same thing.

  When you have an index.html in a folder called test then BC will lead the url/test, /test/ and /test/index.html to that, and if you have a 301 on this page redirect go somewhere elese.

• Button redirect URL always redirects with the Validation Error Messages

  Hi all
  I need help/clarity on not allowing a redirect button redirect the page when there are Validation Error Messages that appear on the Page. I use a form with about 10 postings. I don't want an end user to be able to continue to use / click on the redirect if one of these Validations button occurs. My button redirect URL lance a standard call to redirect javascript to pass some values of 1 shape to another shape, button calls the function. I also have a Condition on the button which does not display this button based on some users. Any help with this is certainly appreciated.

  OK, your always using management of javascript, can you not use a branch of the page under branches? Set the target under the button - no target - and because using a branch of page, you can set the domestic fire after calculations and validations, use a branch of the page...

• ASA 5555 X with power Module of fire and redirect URL to WSA

  My question is related to the flow of traffic with an ASA 5555 X with the power of fire services module and a WCCP redirect a device of the WSA.

  I think that the traffic flow should occur such as:

  Traffic http--> ASA--> FP IPS--> WCCP in the WSA Proxy--> (Internet cloud)

  In this way the IPS could identify all customers before traffic hits the Proxy of the WSA.

  So the question is, is the policy of Service on the SAA get processed before the WCCP redirect? Is - this configurable? Or the ASA deals the WCCP redirect before the Service policy routing traffic through the ASA?

  Y at - it guides that go into the details of this scenario?

  Thank you

  David

  David,

  There is no plan to join WSA ASA/power of fire or FTD. Each has strengths and treats the customers with different requirements.

  WSA like you know offer customization deep and rich reports or web filtering. However, it is limited to http/80 and https/443. Firepower is an easy solution if you already use it for NGIPS and/or Malware protection. It lacks some of the features of the ASO reporting (although FMC can be highly customized if you dig deep).

  There are also OpenDNS to consider whether it's capabilities are calls for you.

• IOM - Forced OAM of password change signout redirection URL

  Hello

  We have integrated the OAM and IOM 11.1.2.2 using a DCC 11g webgate.

  SignOut IOM correctly goes to the page of disconnection, OAM.  Aclose with the help of IOM forgotten password OI featureM redirects to the OAM login page.

  My problem occurs when a user is forced to change their password at the first login.  Screens of the IOM appears as expected, but after completing the page and clicking on 'Submit', the display shows an error ' ADFC-02017: the value of the url cannot be null or empty.  Logs show SSOAutoLoginHelper: redirect Signout URL: null.

  Change of password is successful, is just the redirect which fails.

  Can someone tell me where the redirect Signout URL must be set?

  Thank you

  Darren

  Thanks for your reply, but it's an integrated OAM and IOM put in place there is no link of password change created by me.

  In my case, that error was because OID obpasswordchangeflag is set to true but that IOM usr_change_pwd_at_next_logon has not been set to 1.

  This because the IOM has been upgraded from a version 10g, who has worked with an OAM 10 g version where all the functionality of password entrusted by OAM 10 g, if no user was never their flag usr_change_pwd_at_next_logon is set.

• Raise_Application_Error with redirect url

  Hello people:

  11 GR 2

  APEX 4.2

  I created a page in my application with a personalized message indicating a breach of security clearance.

  If I create a trigger to raise an error like this:

  CREATE OR REPLACE TRIGGER BI_TEST_VAL

  BEFORE INSERT OR UPDATE OR DELETE

  ON MY_TABLE

  FOR EACH LINE

  BEGIN

  IF v('APP_USER') ('xxxxx', 'yyyyy', 'zzzzz') THEN

  RAISE_APPLICATION_ERROR (-20001, ' you n "not have permission to edit this table.)  Blah blah blah. ") ;

  END IF;

  END;

  How can I redirect to my page custom without any DML on the table?

  I tried, but it did not work: it redirected, but changes have been made to the table:

  CREATE OR REPLACE TRIGGER BI_TEST_VAL

  BEFORE INSERT OR UPDATE OR DELETE

  ON MY_TABLE

  FOR EACH LINE

  BEGIN

  IF v('APP_USER') ('xxxxx', 'yyyyy', 'zzzzz') THEN

  HTP. INIT;

  HTMLDB_APPLICATION. G_UNRECOVERABLE_ERROR: = TRUE;

  OWA_UTIL. REDIRECT_URL ('f? p =' |) V ('APP_ID') | ':' || 42. ':' || V ('APP_SESSION'));

  END IF;

  END;

  Basically, how can I redirect without applying any DML (if the user is in my article 'IN')?

  Thanks for your help,

  Aqua

  Data in the table can be "protected" at different levels. Since SQL Native level (by dynamically injecting SQL predicates using Fine grain Access Control/FCAG), triggers, constraints, interfaces PL/SQL, and so on.

  Using PL/SQL as an API is a common approach. It creates an abstraction layer, by removing the SQL table structures and so on, for the appellant. It is flexible, because it can contain some business rules, validation rules and so on, in order to protect the integrity of the transaction.

  Thus, for example: create a package that handles the transactions necessary to insert new data. As part of the security of the transaction, the Apex runtime can be verified for the user of the current session - and an exception thrown if a breach of security.

  You must now decide how to make this API call from an Apex page.

  You can create a page (on presentation of the page) process which deals with the exception - and redirect the browser to another URL. You can have this process treat not the exception, causing the flow of Apex engine deal. You can define the region of the error for your theme and your request as a window popup Jquery - result with the workflow engine to redisplay the current page with the exception of the PL/SQL API message in a window of Jquery. Etc.

  Do not forget that there must be a clear separation/border between server-side and features and the application (client) Apex code and functionality.

  Do not mix of server and client, concepts and areas of responsibility in the same code.

• Redirect URL mobile/tablet?

  Hello!

  I recently published a clients with Office Web site, Tablet and mobile alternative versions. If the standard of the www.holidaymobilemassage.com URL is entered in the relevant version charge very well. However, if one of the alternative URL is displayed (for example, www.holidaymobilemassage.com/phone or www.holidaymobilemassage.com/tablet) the mobile/tablet version will show regardless of the device on which it is viewed.

  Is it possible replace it so that even if the user clicks on a link to the URL of the site from phone or tablet, it will display the correct version?

  Thanks in advance for your help

  Luke

  "Is it possible replace it so that even if the user clicks on a link to the URL of the site from phone or tablet, the correct version will show?

  You need not give links for Mobile and Tablet because Muse automatically the redirection.

  Don't touch anything, everything works perfectly, tested on Mini iPad and iPhone 5 s. use of the gaffe

  iPad Mini:

  

  iPhone:

  

  iPhone:

  

• You want a javascript redirect URL using a previously defined page element?

  Hello
  I have a button where I set up a redirect to the URL option and you use: javascript:html_PopUp('http://yahoo.com',_'_newwindow').
  
  It's pretty clear, and it works. I also have a defined page element that contains a valid URL
  For example: P4_OFFICE_WEB_PAGE_LINK_V: = 'http://google.com '.
  
  I want the pop up to use a stored value, not the hardcoded hard a top... I tried all these, but none seem to work:
  
  JavaScript:html_PopUp('P4_OFFICE_WEB_PAGE_LINK_V',_'_newwindow');
  JavaScript:html_PopUp(':P4_OFFICE_WEB_PAGE_LINK_V',_'_newwindow');
  JavaScript:html_PopUp(APEX_UTIL.) GET_SESSION_STATE ('P4_OFFICE_WEB_PAGE_LINK_V'), '_newwindow');
  
  What should I use?
  
  Thank you.

  Hello

  Try

  javascript:html_PopUp('&P4_OFFICE_WEB_PAGE_LINK_V.', '_newwindow');
  

  Kind regards
  Jari
  -----
  My Blog: http://dbswh.webhop.net/htmldb/f?p=BLOG:HOME:0
  Twitter: http://www.twitter.com/jariolai

• Send the page and redirect url

  Can someone tell me how I can do the following when the user presses a button. I can do 1 and 2 separate button but don't know how to link to a single button.
  
  When you press a button (example: submit button)
  
  1. send the page, do a few select and insert
  2. a url redirection
  
  
  Thank you very much.
  
  Zen

  Change the branch that fires after 'Send' to go to a URL instead of a page as you probably now have it.

• Redirect URL

  I want to redirect my page contactus.html when a form is filled out and sent. That's what I http://www.designsbygeno.com/%3C
  
  Here is the code that is currently running.
  
  "< input type ="hidden"name ="redirect"value =" http://www.designsbygeno.com/contactus.html "> "
  "< input type ="hidden"name ="next_url"value =" http://www.designsbygeno.com/contactus.html "> "
  < input name = "submit" type = value = send / >
  
  I thought it was good,
  but I've been wrong before
  
  thanx

  OK then... that's what I'll do

  Thanx
  swgeno

• Redirect the loading of the page (table-driven rules)

  ADF 11 GR 1 material PS1
  
  Hi all
  
  On some pages, I need to redirect the user based on a table, based on rules (for example the page is live only between dates x and y, etc.). Because there will be many pages with this feature, as well as configuration of table in which concerns rules (for example what page is affected, what dates are valid, the user, the what url should be redirected to), and because this can happen for both consolidated and submitted tasks, I do not know if you are using a router is the best way to do it.
  
  By this thread
  Redirect in adfc
  
  I would try to do it via a bean method that is called when the page is loaded. Here's what I can't understand:
  
  (1) is there a way that the method of beans can include the name of the calling page?
  (2) how to call the method of bean on loading the page that would allow a redirect.
  
  About #2, in the previously mentioned thread, someone said a PhaseListener on RESTORE_VIEW, but I do not understand how to do that.
  
  Thank you.

  Hello

  the phase RESTORE_VIEW after can be listened to in a PhaeListener that you configure in the file faces - config.Xml. This phase RESTORE_VIEW has access to the FacesContext and so the ViewRoot, which provides information on the requested viewId. You can then change the this ViewRoot ViewId depending on your needs of redirection.

  A router activity is recommended here because the use case you describe is conditional navigation. So if you need to have the logic in a managed bean, then why don't you point the case of the router?

  Frank

• Several redirects URL after authentication of the user based on roles

  Hello
  I want to make several url redirects after login. It is:
  
  If a user connects to I want to open - 1.html.
  
  If user B logs I want open - 2.html.
  
  Please tell if this can be done in OAM or not and how do?

  First, create a simple policy area with Basic authentication scheme and test if you can you connect and see the home page of your application.

  Suppose you want to make redirects based on an attribute called user:
  myDepartment = IT, HR, finance, Support, HelpDesk
  Therefore, you should design 5 URLS for each of the departments above.

  Make sure that "myDepartment" is indexed in LDAP.

  The next step:
  Create a domain policy with the resources and rule rule & authentication check. Now, for the authorization, set the following:

  Authorization rules (5):
  AuthZ4IT, AuthZ4HR, AuthZ4Finance, AuthZ4Support, AuthZ4HelpDesk

  Definition of each:
  AuthZ4IT-> General:
  Enable wins: Yes
  AuthZ4IT-> Actions-> success of permission-> URL of Redirection:
  http://www.mycompany.com/it
  AuthZ4IT-> access-> rule:
  LDAP: / / / o = company, c = us? void? (myDepartment = IT)
  AuthZ4IT-> deny access-> role:
  Choose "any"

  Same for AuthZ4HR, AuthZ4Finance, AuthZ4Support, AuthZ4HelpDesk

  Expression of approval:
  AuthZ4IT or AuthZ4HR or AuthZ4Finance or AuthZ4Support or AuthZ4HelpDesk

  Now test the URL redirects.

  -shetty2k

• (Redirected) 2330 AIO never able to get Microsoft updates

  Friend model AllInOne 2330-00 Win 7 SP1 in service 19/04/12. Has NEVER been able to accept the Patch Tuesday updates. Tried all the tests of Microsoft service repair and suggestions.  Get error that updates is not defined.  Rest of the computer works fine - internet access, virus scanning, etc.  Data stored on external hard drive.  What I have to reset the status of the plant, or I can re - install Win 7 [no available disks, but I have the key.]

  Thank you.

  Best of this post in the Forum OS from Microsoft here:

  http://en.community.Dell.com/support-forums/software-OS/f/3524.aspx

  Bev.

• new redirect URL of ISE 1.3 for WLC (Webauth external URL)

  Hello

  Could someone tell me the URL of ISE 1.3 for WLC?

  ISE1.2 was:

  https://ISE-1.Cisco.local:8443/guestportal/login.action

  Yes, the structure has been changed since version 1.2, and I did bother understand since there is now a button 'Portal test URL. Have you tried? Or do you still need to be able to manually browse for it?

  If you still need search manually it then you can use the test button to get the URL and then save it :)

  Thank you for evaluating useful messages!