Airbook cannot find HP6600 and CD in the configuration of the printer

Similar Questions

• I downloaded the demo of Photoshop elements 13 and saw some instructions when downloading but now cannot find them and I do not think that have completed the installation as it is not on the computer.

  I downloaded the demo of Photoshop elements 13 and saw some instructions when downloading but now cannot find them and I do not think that have completed the installation as it is not on the computer.  There is a deployment folder that I can click in.  Could this be it?

  Barbara, what version of operating system do you use? / Applications (Mac), you can check and control panel > programs and features (Win) to check if it's installed on your machine.

  Here is the link for products download Photoshop Elements | 10, 11, 12, 13

  I hope this helps.

• Receive error message "cannot find volume of extraction" during the installation of products of microcoft"

  When I download... NET or windows install it downloads fine but when I click Run to install I get "cannot find volume of extraction" make sure you have the right permission. This does.nt occur on all facilities but it is in the Sub microsoft windows update installs and direct installs the Center.ce to download just started a few weeks ago and I tried everything in my power to correct without result.

  * original title - what is and solution to "cannot find volume of extraction" during the installation of products of microcoft? *

  Hi howardchampion,

  Please see the thread with a similar problem and fix possible:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install/i-am-trying-to-install-Microsoft-Silverlight-and/920f7b7a-E926-47B5-acc4-e8dfbc548696

  I hope this helps!

• Used my copy of OSX MAvericks in the past, but now I get an error message that the application cannot be verified and go to the App Store. I did, but there is nothing to install OSX Mavericks download?

  Used my copy of OSX MAvericks in the past, but now I get an error message that the application cannot be verified and go to the App Store. I did, but there is nothing to install OSX Mavericks download?

  Log in to the App Store and look under the purchases tab.

• I have 12 EP on laptop that is now replaced by a new one.  He cannot find download for even for the new laptop.

  I have 12 EP on laptop that is now replaced by a new one.  He cannot find download for even for the new laptop.

  When I twirl open the PSE12 option I see English. When the download is complete, you usually select the language when starting the installation.

• Oracle 11 GR 1 material on Windows Xp error cannot find J2SE SDK installed to the path

  When I type in the path to java.exe in SQL dev., I got error ' cannot find J2SE SDK installed to the path: C:\Program Files\Java\jre6. "when I entered the path C:\Program Files\Java\jre6\bin\java. What is the reason for this error? How can I fix it? Installation of the database say it was successful

  Developer SQL must the JDK Java JRE not to operate successfully. Your path looks like a path for the JRE. There is a download of windows that comes with the Java developer kit.

  concerning

  Niall

• HP Laserjet M401A: HP Laserjet M401A not will mark the different paper size and tray on the printer properties

  Hello all.

  I have a custom paper size in question and the plateau in the properties of this printer.

  I would like to implement three different printers on the same port, to print directly on a specific tray (without going into the properties of the printer and select the appropriate tray and size).

  I have this printer with the additional third tray.

  I implemented the A4 in the Tray 1 (bypass), a custom size in tray 2 and 3 on the printer.

  When I enter the printer PROPERTIES I want to set up the paper size in tray 2 and 3 value. No question.

  The only sizes I see is 13 x 8, a4, a5, letter, legal and so on (there are choices may 7).

  So, I choose NON SPECIFIC.

  When I go to printer PREFERENCES, I can set up my custom paper size.

  But when I choose my custom paper size, tray 2 and 3 go away and I can choose only bypass or Tray 1.

  If I attributed to A5 (for example) the tray 2 and 3 re - appear.

  How is that possible? where I'm wrong?

  Thank you very much, any help would be appreciated.

  See you soon,.

  Luca.

  Hi Luca,

  That is expected, custom paper sizes are supported only on tray 1.

  Tray 2 and 3 are supported specific sizes of paper.

  You my find graphics of the following as a reference, it lists a paaper supported size for each tray:

  http://h20566.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=5096252&docid=emr_na-c03303423&docLocale=en_US

  Kind regards

  Shlomi

• Brother MFC-7420. Usually, it works on Windows 7, it will not print and I have to unload the coil and switch off the printer before Relighting.

  I use a Brother MFC-7420. Usually, it works under Windows 7, but from time to time (maybe 1 in 20 times) he will not print and I have to unload the coil and switch off the printer before Relighting. It is not always the case, but it is enough times to be a nuisance.

  Ideas, people?

  Hello

  This problem occurs when you make changes to the computer?

  Method 1: Diagnose and automatically fix problems printing and printer

  http://support.Microsoft.com/mats/printing_problems/

  Method 2: Refer to this link: I can not print from my computer via the USB port.

   
  http://welcome.solutions.brother.com/BSC/public/us/us/en/FAQ/FAQ/000000/002700/000006/faq002706_000.html?reg=us&lang=en&c=us&prod=mfc7420_all&page=FaqEndPage
   

  If you have problems, I haveinstall updated printer drivers, see this link:
  http://www.brother-USA.com/downloads/default.aspx?PgId=5&R3ModelID=MFC7420

  Refer to this: update the drivers for hardware that does not work properly.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  See also: printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  I hope this helps!

• Adobe Photoshop Agrementez feint pencil written above and next to the printed text scanned at low resolution in *.tif format? [was: Photoshop]

  Adobe Photoshop Agrementez feint pencil written above and next to the printed text scanned at low resolution in *.tif format?  Is there something else that can improve it?

  GIGO, however, you should be able to bring the pencil strokes back with nothing more than the levels/curves. Color just pick up the low-medium gray and bring levels down until they start looking as you want.

• Managed to install XP Mode but cannot find "Windows XP Mode" in the folder "Windows Virtual PC" and also cannot find any file with the extension of the vmc

  Dear friends,

  I'm using Windows 7 Ultimate 64 bit

  I'm really happy with the answers given on this subject, but after the installation of "WindowsXPMode_en - us.exe" and "Windows6. 1 - KB958559 - x 64 - RefreshPkg.msu ".
  installation went well but I can't find any file on my computer with vpc extension, and I don't see the Windows XP Mode folder in Program Files.
  When I try to reinstall, I get the message that it has already been installed.  In folder options, I enabled see all files including system files.
  Thank you!

  Thank you very much!!!

  After I posted the question (and struggled with the issue for a while),
  I decided to uninstall Virtual PC and XP Mode, and then when I reinstalled
  them everything was fine.
  In any case thanks for the elaborate and useful response which I'm sure
  others will benefit from it.

• Find bookmarks and passwords on the old hard drive

  I watched an attempt all suggestions re. This and cannot locate my favorites and passwords on the old hard drive.
  Hard drive is still connected to my computer, even if the PC had a mother brd, the CPU and the RAM upgrade: because of the upgrade failed to load window, if the Windows file is always available. New HARD drive with windows installed, install again. 11.0 ff. The following search suggestions, I find the new profile, but not that of the old drive. I can access my Mozilla folder in Program Files (x 86), but are now looking for appdata etc.
  Yes, I know, it was really stupid to not save this kind of things before the installation of new equipment, but do not think that the material change was hose go my W7 install so bad. Thanks for any help in advance.

  AppData is a hidden file, you need to enable hidden files and folders may be to find. http://www.bleepingcomputer.com/tutorials/how-to-see-hidden-files-in-windows/.

  After finding the appdata folder, read https://support.mozilla.org/en-US/kb/Managing-profiles and recovery of data from an old profile.

• MAX cannot find two usb cameras at the same time

  Hello

  I want to use two cameras usb (Thorlabs DCC 1545 M) in NOR-IMAQdx in Labview, but it cannot find a single camera (the one plugged earlier), and also a single camera is shown in MAX. Both cameras working in the manufacturer's software, and if I unplug the 1 unit, the 2nd will be displayed in MAX after a refresh.

  I found that one camera is supported for each USB hub in Labview, and all USB ports in this computer correspond to a same hub online. I don't know if this is causing the problem.

  In fact, I need to take the picture in both cameras at the same time, a switch programmed between the two cameras will work for me.

  Any suggestion and comment will be appreciated.

  Hello Hosni,

  According to this link, you can acquire from multiple USB cameras simultaneously.  The limitation is on the manufacturer and how they interface with the bus of DirectShow.  When you use two cameras of the same make and model, it sometimes happens that not enough information is not IMAQdx to distinguish between the two cameras.  When you switch to MAX cameras, they come as different cameras, or they appear actually virtually the same?

  Since you said switching between them might work, I found an example that does just that.  Just make sure you give a name to each camera single camera.  I hope this will be useful for you.

  In addition, there is a bit of discussion on this topic on the forum of discussion already.  Check out these related threads, or use the search box to search for more.  There is much information available!

  http://forums.NI.com/T5/LabVIEW/multiple-USB-cameras-in-LabVIEW/m-p/833517

  http://forums.NI.com/T5/machine-vision/two-USB-camera-identification/m-p/2193960

  http://forums.NI.com/T5/machine-vision/synchronized-capture-for-multiple-USB-cameras/TD-p/1879647

  http://forums.NI.com/T5/LabVIEW/multiple-USB-camera-image-acquisition-using-vision-acquisition/TD-p/...

• Unable to adapt "record level" for the sound recorder. Audio system works very well. Cannot find a software which allows the change to the record level of mic.

  I want to increase the logging level for my sound recorder and cannot find anything in the Windows 7 software that will allow me to do. I know that it's there somewhere because I put it at 50% during a recent troubleshooting session when he was at zero. Now, I find that the screen to increase it even more.

  Hello

  Welcome to Microsoft Windows 7 answers Forum!

  You can try the steps below and check if the problem is resolved.

  To adjust the record volume, follow these steps before you register:

  1. click on Start

  The collapse of this top this i, and then click Control Panel.

  2. click on hardware and sound.

  3. under his, click manage audio devices.

  4. click on the recording tab.

  5. click on the microphone device and then click Properties.

  6. click on the tab levels move the slider to increase or decrease the volume.

  If you find difficulties in following the above steps then you must follow the link below.

  The volume of the audio recorded by sound recorder in Windows Vista or in Windows 7 is lower than that of Windows XP.

  http://support.Microsoft.com/kb/973446

  Thank you, and in what concerns:

  Suresh Kumar-Microsoft Support.

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• "Cannot find server" when connecting to the database homepage

  Until someone tells me to look at the other post on the first page of the forum with a similar title... I've already read through it. I also did a search of the forum, but I'm still stuck.
  
  Let me start by saying that I have almost no experience on one database other than writing queries. I installed Oracle Express 10 g today for I can have access to a development environment to test my queries on the sample data. After installation, it automatically opens a web browser, pointing to the URL: http://127.0.0.1:8080 / apex, the page could not be loaded (error Internet Explorer: "cannot display the page." and at the bottom of the page: "Cannot find server or DNS error"). I decided to restart my computer to see if that would make a difference. Then, I opened the link 'Start' in my Start menu in the new folder of Oracle. It instructed me to first of all, go to the home page of the database (with the same URL: http://127.0.0.1:8080 / apex), and the page still doesn't load. Based on the posts that I could find on the subject, I chose "Start Database" of the Oracle folder in my Start menu. In the command window that pops up, he says:
  

  C:\oraclexe\app\oracle\product\10.2.0\server\BIN>net start OracleXETNSListener
  The requested service has already been started.  
  
  More help is available by typing NET HELPMSG 2182.
  
  C:\oraclexe\app\oracle\product\10.2.0\server\BIN>net start OracleServiceXE
  The requested service has already been started.
  
  More help is available by typing NET HELPMSG 2182.

  Then... It looks like the database and listener are already started, so I don't think that's the problem. So, I'm stuck. I am trying to access to this on the same computer, I installed it, and I don't plan any time in the future where I will need to access the database remotely because it is just a test environment for my personal use.
  
  The most recent post on this subject, I saw something to try to go to http://hostname:8080 / apex. And, forgive me if this sounds like a stupid question, but I guess I have to replace "hostname" in this URL with whatever hostname actually is... right? So, uh, how can I know what is the host name?
  
  Published by: user11033437 on April 15, 2010 13:18 (corrected to default URL)

  Well, looks like the answer to one of the previous questions, "isn't the database running" was ", not really" :(

  If there is no newspaper alerts, there no database, most probably the \oraclexe\oradata\XE\ does not contain. DBF files - try manual cleaning (remove registry entries, the Windows install cleanup, etxc.) following ALL the steps in the http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25143/toc.htm#BABFFJIB

  And check to make sure that your connection to the PC is in the local administrators group (domain administrator is not enough here) and run the installer... what version of Windows? XP? 2003?

• When it is connected to the LAN, FF cannot find servers; no problem with the wi - fi

  26.0 Firefox running on a Windows 8.1 System. The thing I meet is this: I have no problem loading of pages and surfing when I am connected to my wi - fi network (I have a double function modem that wireless and LAN at the same time). However, whenever I plug the LAN cable, I get the error message that Firefox can't find the server. In this case if I disconnect the wireless at the same time. BUT, if I continually press the button [start] or simply tap the icon reload the page in the address bar, will eventually load, usually after a few failed attempts. However, the page loads usually only partially in a first time, apparently without advanced HTML formatting. But, after clicking on reload again one or two times, the page loads normally. Unknown, is that the behavior is not consistent - some pages of charge very well. But I can't for the life of understand me a boss.

  I've tried troubleshooting by disabling NoScript, but it doesn't seem to make a difference.  It's almost as if the wait time for a response from the server is so minimal when connected to LAN that the server has no chance of loading the first time.  Does that make any sense?  If so, how can I go about fixing the issue?
  

  Thanks for any help you can offer on this (for me, anyway) head-scratcher.

  Maybe another DNS server is used or there is still cached data.

  Have you tried a hard facing to bypass the cache to refresh all files?

  • Hold down the SHIFT key and click the Reload button
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (Mac)

  You can also try to switch to work offline/off voltage after changing the network connection.

  If is also possible that your firewall treats the Wi - fi connection other than the connection to the local network.