Airport Express works with iPod Hifi?

Similar Questions

• AirPort Express works fine with OSx but not Windows

  Bought my AirPort Express 802.11n just a few months.

  It worked very well for all computers and mobile devices in my house.

  A few days ago, all of a sudden, PCs of my roommates started to get 'internet slow, yet shows the power of the full signal. Note that my Macbook Pro has no problems. A PC in my room has also no problem using Ethernet.

  My MBP is about 5 meters from the router with a door between the two. PCs of my roommates are about 8 to 10 meters from the router. I brought my MBP in their room and always get the same usual speed, I got in my room.

  Please notify. Really appreciate it. Thank you very much.

  The AirPort Express sends the same WiFi signal to all devices.  If computers have connection problems, it's a number PC... not an AirPort Express station.  I don't think there's a lot of guys here on an Apple forum PC... but it is possible that we could see your message and comment.

  In the meantime, you might want to try to restart the AirPort Express, restart the PC and overlooking this support document

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#Netwo rk-problems = windows-81 & v1h = win81tab1 & v2h...

• Airport express works do not with modem tp-link

  10.11.3 OS iMAC

  Cable modem comcast just replaced w / tp-link modem is now no wi - fi.  Comcast told me maybe my Airport express are too old (4 years).

  Rebooted everything several times - while I get the green light on express - still no wi - fi.

  What is the model number of the AirPort Express?  If you do not know, look on the side of the unit for the model number. It is difficult to see, so you need to perhaps good lighting and reading glasses, or a magnifying glass.  The model number starts with an 'A' follow-up of four digits.  For example, you might see A1264.

  What TP-Link modem model?

  When you say that the airport has no WiFi, we must understand what it really means.

  Can you 'see' the network wireless signals on your computer, but not connect to the network?

  Can "see you" the wireless signal and connect, but not to get an Internet connection?

  Or can you not 'see' the wireless signal at all?

  You're still running OS X (10.5.8) on your Mac as shows it your profile?  If this is not the case, what operating system are you using?

• Can I plug two Airport Express units with ethernet cord and have a third Airport Express Terminal receive airplay music wirelesslly? In other words, can I combine a Wi - Fi network and roaming?

  I have an undesirable on the 1st floor, connected to the cable modem Ethernet event. I want to connect that AE to an another AE on 2nd floor with ethernet cable AND have a 3rd AE on the 1st floor to receive music through AirPlay wireless. I thought that linking the two first AEs with ethernet would improve the performance of web site on my iMac desktop, which is on the 2nd floor and connects to the 2nd floor AE via wifi. The EI the first two are newer model (MC414LL/A); the 3rd AE is old model (MB321LL/A) and is connected to a stereo Bose with a mini-jack to RCA cable double cord. I tried to set up this network using AirPort Utility, but have had no success. I don't know if it is possible to do what I want to do; and if this is the case, I don't know how to set the various parameters for each AE using AirPort Utility. I've temporarily implemented a purely wireless network; Do not connect DO NOT the two AEs with ethernet and everything works. I would enjoy my plan as above, or if I hold with purely network wireless. Any help would be greatly appreciated.

  Using ethernet network roaming between the two floors is a much better idea than anything wireless.

  The installation should be automagical if you start with the two AE plugged in by ethernet.

  It must be configured in standard roaming with identical names wireless.

  If you have any questions... Please, just after the airport utility screenshots of the configuration... but

  An express train is probably the router? You must confirm this.

  The second express is so configured in bridge... It's on the network tab, disable the bridge mode.

  

  Without thread is set to create a wireless network and simply use the same name and the same password as the other Express.

  As it should be automagical when you WAN on the second AE plugged into the LAN on the first AE.

  Wireless and then extend to will also be installed enough well automatically even if sometimes it works better in a client that extend wireless mode.

  See the Client mode.

  AirPort Express: How to join an existing client mode - Apple Support Wi - Fi network

• How to document iMac to my apple tv 2, but sending audio to the Airport express connected to my hifi

  I have an iMac, a macmini an express airport. I want to send 720 p video to the Apple TV 2 iMac (or macmini) but send audio to the express from the airport which is connected to my stereo. If the apple TV 2 will serve as a video receiver connected to my projector on the ceiling. (I don't have a way to use a hdmi cable). This is the reason why audio must be sent to the hifi differently.  Alternatevely because the macmini is connected by USB cable to my hifi (to my dac), perhaps there is a way to send audio from a movie to the stereo through audio external USB card (it is the dac) while reflecting the macmini for the Apple TV 2...

  in iTunes, you can select more then 1 speaker output could be the express and then mirrored to the appletv in the manner of STDS, if is not in iTunes then I think that you need a third party such as the wing option

• AirPort Extreme works with only a few devices

  I have an AirPort Extreme 802.11 model ac.

  It worked perfectly for about a month, but now, only a few devices are connected with it. These devices will be connected only after the opening of the AirPort Utility. My AppleTV will not indicate the network, but the message "no network connection. Your Wi - Fi network is not connected to the internet. Change your settings or select a different network. »

  I tried restarting the AirPort Extreme and my router by unplugging and plugging back. I also rebooted AirPort Extreme internally by restarting in AirPort Utility. From now on, only my iPhone and MacBook Pro will connect.

  Even with those who sometimes it will connect and the other will not.

  

  Any ideas on how to solve this problem?

  I would say that your extreme is autonomous from router mode in Bridge mode... He can do. A power failure caused to ruin the current configuration and replaced another... you must remedy by a complete factory reset and reconfigure correctly.

  Before to do it tell us what model is your modem?

  And you have the configuration of the airport in bridge or router at this time?

• Time advised to work with iPod shuffle

  Hello. How many hours it is advisable to use my iPod shuffle on a daily basis to extend the life of it? I appreciate your suggestions.

  There is no specific amount of hours per day, you must or must not use your iPod. Use it when you want to load when she needs. Try to avoid leaving to drain completely. Don't leave in cars. You cannot extend battery life beyond the ability he has.

• 12.3.3.17 iTunes could not connect to devices AirPlay (Airport Express)

  After the update to iTunes 12.3.3.17 I can connect is more to Apple Airport Express.

  I updated iTunes to 12.3.3.17 on both computers:

  1. Windows 7 64-bit SP1 / iTunes 12.3.3.17 64-bit

  2 Windows 10 64 - bit / iTunes 12.3.3.17 64-bit

  On the Windows 10 computer, iTunes can connect and play all three Airport Express.  An iPod Touch can also flow to each of them.

  After the upgrade to 12.3.3.17 on the Windows 7 SP1 computer, iTunes can see all three Airport Express and they are not greyed out.  But when an any of them are selected in the dialog of speaker, iTunes tries to connect and after 30 seconds results in the error "an error occurred when connecting to the device AirPlay"xxx". The network connection timed out' and the selection is then grayed out.

  The network card on this PC, the router, and all three Airport Express everything seems to work properly as I can deliver on all of them using software third 'wing' with other applications as the source.  I can also control iTunes on the PC wirelessly from iPod with the Remote app.

  I just can no longer spread to one of the Express from the airport directly from iTunes after the 12.3.3.17 update.

  Any thoughts?

  Well, problem solved (mostly) by a lot of trial and error and it turns out be a problem of WF on the UDP ports must be open for Hello.  It was a bit of a surprise, because the Airfoil program (third party utility AirPlay) uses also Hello (that works).

  The Windows Firewall has a rule entry of inbound traffic for Hello to port 5353 UDP.  Changing the rule to allow all Ports (UDP) does the job.  So I studied what UDP ports were actually necessary for the Hello and Airplay and amended the rule again, this time replacing all Ports with these specific UDP port numbers: 554 (1900), 5289 5298, 5350, 5351, 5353, 49159, 49163

  However, that did not yet work so I ended up coming back to the all Ports configuration.

  If someone uses the firewall native Windows (preferably Windows 7, but probably the same for 8 and 10), I would be interested to know what UDP ports allows your Windows Hello firewall.

  Control Panel > Windows Firewall > advanced settings > inbound rules > Hello

  I had certainly not changed firewall settings before this update to iTunes (and AirPlay worked just hours before) and know not why the update seems to have changed the Windows Firewall settings, but that helps to explain why the Windows 10 computer worked fine after the update, because she was using the McAfee Security Suite firewall.

  Thank you!

• Question Airport Express.

  I'm so confused. I'll try to keep a long story short. I lost my internet connection a few weeks ago, and instead blame Mediacom, I blamed my old airport of 12 years and I bought a new Airport Express Terminal (with a new ethernet cable to replace a at least 20 years. While the implementation of the new Terminal Airport Express, I was unable to get anything to work and finally called Mediacom. The problem was indeed at their end, where the cables to connect in the basement of my four-plex apartment.

  Now to cut to the Chase: given that I reproach myself my own equipment and not of Mediacom, I managed to set up two connections Airport Express (call Network1 and Network2). When I restart my computer, it connects inevitably to one or the other, but never the same. It connects only to those who, at the time, won't let me connect. So I turn to the other and all are well again. At the same time, when I get home, my iPhone will almost always automatically connect to the network which does not connect to the internet. It might work with Network1 while my computer only works with Network2. Same thing with my iPad. It is either 1 or Network2, but never both, and never the same. The three units can be on different networks at the same time for each group in order to connect to the internet.

  So my question (s):

  How can I remove one of the networks so that it completely disappears? There is apparently some kind of criss-cross current that confuses my computer and its peripherals.

  If I delete that which does not (at the time), I ALWAYS keep one connect correctly or I need to reset my Airport Express and start from scratch?

  I even does not start in the subject what a pain it was to connect my Tivo to my wireless network, because it works too only with one or the other. And I still have my printer wireless to set up.

  Help/suggestions/explanations are greatly appreciated. I've been using Mac and set up networks since the dark ages, but it left me speechless.

  The Airport Express should not have 2 networks unless you have enabled the guest network. Is it possible that your Internet router has a Wi - Fi network on it as well?

  I highly recommend you reset the default Airport Express Terminal and try again. It's really the only way you are going to get a suitable resolution.

  It is also possible that your network of old and new settings are still in iCloud keychain and causing some confusion.

  I would recommend you disable iCloud Keychain on each device, then make sure that you forgot the network name on each device.

  Recreate your wireless network (giving a new unused name so you can tell if it's all working), then log in to the network without wire on each device, one at a time, making sure the internet connection works.

  You can then re-enable iCloud Keychain if you wish.

  Good luck.

• How can I make it work with just an Apple TV, AirPort Express and iPod/iPad/iPhone?

  Hello people of Apple, I have some questions about a new "setup" of Apple products that I hope I can get to work between them. In other words, I need to know if what I am wanting to do in fact is possible with this new configuration.

  Current set up:

  • mini iMac (a former member of 2010, but fully updated for OSX El Capitan)
  • drive external HARD as the Time Capsule disk and with tons of music not purchased through the iTunes store (from my CD collection)
  • Old Airport Express connected to the modem (which received the fiber of my ISP)
  • 3rd Gen iPad
  • iPhone 6 more (work phone)
  • iPod Classic 5th Gen with close to 30 GB of my library and plugged on my car stereo to
  • iPod Shuffle 4th Gen for gym

  I want my setup to be:

  • Apple TV
  • Airport Extreme with external HARD disk * even from above * (my library backup iTunes music around, videos and photos) connected via USB
  • iPad Pro
  • iPhone 6 Plus
  • iPod Classic 5th Gen that I want to stay plugged into my car stereo to
  • iPod Shuffle 4th Gen for gym

  So my questions are: can I continue to sync my iPod Classic and my iPod Shuffle without a computer (I guess maybe not), and if so, HOW? I'll be able to sync the iPad and iPhone via wifi without computer as well? Also, I'll be able to play my library directly from the drive external HARD using the Apple TV?

  I'm guessing / hoping that the new Apple TV from the music/iTunes app and the pictures/iPhoto app, I can connect my iPod to the airport and synchronize them via the app AND connect Apple TV directly on the HARD disk via the airport. And perhaps also to synchronize the iPad and the iPhone on wifi in all Apple TV apps or something or maybe I just need any Uploader in iCloud and will not even need the HARD drive more except as a backup. Help!

  You have need of computer-Mac or PC. You can sync the iPhone/iPad wireless, but only via a computer in iTunes, I'm not sure about the capacity of wifi iPod.  Not to mention the iTunes, the software is required to manage the devices and media.  Important note: you must always back up your purchases - just because you buy a book, movie, TV show, song today does not necessarily mean that the media will be available from Apple servers for eternity.  The Studios retain rights and may, at any time, sign an exclusive agreement with a network, streaming provider etc which would then remove this file to be available on Apple servers.  You must download and save purchases - that would need a computer running iTunes software. You could buy storage for all your media, but then additional personal iCloud yet you would need a computer to manage. In addition, with respect to the Apple TV, you cannot connect all readers.  The USB port is only for the restaurant and full-service.  The Apple TV is a streaming device, but for the local media, he uses homeshare, which requires a computer iTunes rather than be connected directly to a storage device.  Although there are other applications like plex or infusion but they would require a NAS configuration rather than the HARD disk, and you would want / need a computer to manage the NAS server...

  the only thing you want to eliminate is the only thing that is required for all...

• I replace my airport express with the new model. Flashing orange. It works, but cannot configure security. Tried to reset via the reset button.

  I replace my airport express with the new model. Flashing orange. It works, but cannot configure security. Tried to reset via the reset button. Tried unplugging and tried unplugging the modem. I would like to fix.

  Modem... doing and... model number you have?

  What operating system do you use on your Mac, or you are using an iPhone or iPad set things up... or a PC?

• Airport Express used as a range extender with a Virgin / superhub of Netgear does not work

  I use Wifi around the House on three floors and in the back kitchen.  in the kitchen, reception is poor, probably because of masonry between the modem and the kitchen walls.

  I bought an Airport Express 802.11n in January 2016 hub to extend the WiFi in the kitchen and I hope that the patio beyond.  The distances are not great - 10 to 15 m.  We have the Virgin as a provider with a Netgear Virgin Super Hub (490 VMDG).

  Express to the airport moved and this is confirmed when to check on my Mac with Airport utility, the MONKEY shows and itself a steady green light.

  Problem is that in using wifi designs in the kitchen the signal is poor to non-existent and when I turn off the EPA the signal isn't as well, which implies that the received signal is that of hub Super rather than the EPA.

  I guess I can't realized overall upward to extend an existing network?

  Any suggestions?

  The Airport Express is not designed to extend the signal of a 3rd party router, so if you try to have the Express connect wireless wireless and to extend the signal, he can not do with your Virgin Super Hub.

  The Express is designed to extend the signal from another wireless only router from Apple.

  The Express 'joined' your wireless network, it could be used to connect a compatible USB printer or for use with AirPlay.

  If you want to Express to extend the signal of the Super station, the Express needs to connect to the hub using wired Ethernet wired, permanent.

  Alternatively, another option would be to add another Express, install it near the hub and plug it into the hub with an Ethernet cable. Then, a 'distance' AirPort Express would be able to extend wireless signal of the Express 'main '.

• airplay iOS 10 with airport express

  Impossible to find airplay with Airport Express, but works well with apple tv

  some1 help me

  Same problem with my iPhone 5 and IPad Mini after upgrading to IOS 10.

  Firmware Express Airport: 7.6.7

• Mini TiVo with airport express

  My question is about the tivo, the Airport express and the extreme of the AC.  have the romaio standard tivo in my room and the mini in the other room about 25 feet, with thick walls about 7 feet.  the mini is to cut the audio and the video of course.  If the research online, wanting to know the best solution.  If the connections are such:

  1st room:

  Extremes of AP connected to the modem

  romaio connected by ethernet to AP extreme

  2nd room:

  AP express connected by ethernet to tivo mini

  Deck AP express under the name "extended" to the extreme

  bridge over the 2.4 ghz network

  so the question is whether to 'extend' or 'join' the network?

  or the other bridge then on the 2.4 ghz or 5 GHz?

  all the details, let me know

  There is no significant difference.

  so the question is whether to 'extend' or 'join' the network?

  or the other bridge then on the 2.4 ghz or 5 GHz?

  The question is fair level of signal and bandwidth.

  It is difficult to get the numbers now, as the utility v6 airport is no longer a toy only utility is to say a tool. As the use of a hammer plastic actually hammer in nails.

  Try to get the speed of connection... in v6, you roll your pointer over the connection. As thus.

  I have two gen5 connected AE as extend wireless... It did not work with long connection so I moved to the extreme a few feet from the other device. They are now about 4' apart.

  The connection now shows 195 MB/s, but you need to playback during the actual file transfer. It will go down considerably the work.

  

  If you can get a machine more old computer or windows and install the utility 5.6 you will get much more information.

  

  Links are not the same from one end to... Although here, it works fine. As I had before that connection showed ok one end but much poorer on the other... This info is now impossible to obtain in utility v6.

  25 ft away, with thick walls about 7 feet.

  I'm sure that the walls are 7 thick inches rather than 7feet.

  But everything depends on the construction and the number of walls.

  Light framing lumber and Sheetrock (rockboard?) have fairly low resistance wireless.

  Brick or concrete walls have a lot of resistance wireless... you must use ethernet or adapters EOP.

• I use a VPN in AirPort Express. I've updated firmware for 7.7.7 and DNS assigned by my VPN does not work anymore. Upon entry, the icon 'internet' in utility Airpot turns brown, and the internet stops completely. Anyone have any idea?

  Why my internet connection dies? I use a VPN to my internet at home. I put the DNS numbers supplied by the company VPN in my airPort extreme, which, in turn, provides wireless for home. It worked perfectly until I updated to firmware 7.7.7. Suddenly the green light next to the 'internet' in airport Utility icon went Brown, and it is therefore most all internet. I put numbers in DNS to my ISP, and internet provider is displayed again. All the other numbers in DNS, whether it's Google, OpenDNS or VPN to stop the dead from the internet. Anyone has an idea about this?

  Airport base stations, are at best, a VPN-well past that device. It is a server or a VPN client. Upgrade to the latest firmware does not change this fact.

  To create a VPN tunnel using the AirPort Express Terminal, your computer must be running a VPN client that connects to a VPN server somewhere on the Internet. What DNS servers you use should make no difference with VPN.

  If the ISP-supplied DNS servers do not work, I would say that you contact your ISP to find out why they don't allow you to use them.

  What we need to study is more why you lose Internet connectivity when changing the DNS servers of your ISP. Please check with them and to report back, then we can try to help.