Airport Express used as a range extender with a Virgin / superhub of Netgear does not work

Similar Questions

• HY, I used to use your adobe photoshop cs6 I have my laptop. some of the reasons for my laptop was not working, so I've restored my laptop. I have tried to reinstalled photoshop with old license No, but his does not work. what I would do.

  HY, I used to use your adobe photoshop cs6 I have my laptop. some of the reasons for my laptop was not working, so I've restored my laptop. I have tried to reinstalled photoshop with old license No, but his does not work. what I would do.

  Please return to the message sent to you.

• Music and ads are ok. Videos with speaking parts (last tested on the episode of Letterman with Tina Fey as a guest) does not work.

  Hi, I have Windows 7 and the Sound Blaster Recon 3D PCIe audio device. In the last few weeks, I noticed that some videos will play without problem and some have the following problem: the music and ads are ok. Videos with speaking parts (last tested on the episode of Letterman with Tina Fey as a guest) does not work well. Specifically, I hear a noise when they speak. But if I keep place the volume of the speaker (on the icon) and keep clicking the open icon, the sound begins to get stronger and you can actually hear it above his ' ding ding ' by clicking on the icon of the speaker volume. I've never had this happen before. I don't think I did something different from my usual activities lately and haven't downloaded all new program. Music plays without problem. Only the French-speaking parties. I tried the program compatibility troubleshoot and it told me "Incompatible application". Don't know what it means that I am aware of no incompatibility. Never happened before. Just suddenly appeared. Don't know if updates recent MS interfered with the audio device.  Also, I tried looking for questions that are already using the Control Panel, Manager of devices... and no problems were discovered. I put the volume on the strongest settings already and that doesn't work anymore.

  Thanks for your help to solve this problem.

  Just an update.  Problem solved. Faulty speaker connections. Did not touch the connections before the problem, so not sure what happened to these connections, but the problem is resolved. Thank you.

• I keep seeing pop up ads powered by '' cn tatami '' whenever I have to navigate using Safari or open a link on the FB Adblocker app does not work for this. Any suggestions? There is no option to cross the pop-up ad that it redirects to various Web sites.

  I keep seeing pop up ads powered by '' cn tatami '' whenever I have to navigate using Safari or open a link on the FB Adblocker app does not work for this. Any suggestions? There is no option to cross the pop-up ad that it redirects to various Web sites.

  Cache and history of the site Clear settings - Safari -.

  (1232)

• I got the job of Corel Wordperfect Suite 7 on Windows XP. I tried to work with this application on Vista, it does not work.

  I got the job of Corel Wordperfect Suite 7 on Windows XP. I bought another computer, I tried to work with this application on Vista, it does not work.

  I tried not to work with Windows 7. Please can someone help me. I took a few photos for businesscards en other extensions in collaboration with .wpg and .shw.

  ERL
  Rob

  I got the job of Corel Wordperfect Suite 7 on Windows XP. I bought another computer, I tried to work with this application on Vista, it does not work.

  I tried not to work with Windows 7. Please can someone help me. I took a few photos for businesscards en other extensions in collaboration with .wpg and .shw.

  ERL
  Rob

  Keep in mind that WordPerfect 7 is a very old version - eight versions. Usually very old versions of almost any program do not work on newer versions of Windows. I don't know about you, but I suspect that you must upgrade to a newer version of WordPerfect.

• Problem with the touchpad: Tap to click does not work if I use a standard account

  Hi all

  I have a problem with my laptop that I don't understand and I need help from the community.
  As the title says... If I connect to my laptop using a standard account the touchpad does not work if I try to tap to click. Left and right buttons work, move the slider works, works of scrolling, but endearing tape... not even a single tap. If I log in with my account as an administrator, the touchpad works like a charm, no problems. Tap to click and everything you want. If I disconnect the admin account and sign in as a standard user, the problems are back again. I can move the cursor, click on the two buttons (left, right), but I can't type to click...

  I tried to reinstall the driver for the touchpad (which is MOMENTUM...) but it did not. I tried to see if there is any option that can prevent this tapping or something... but in the control panel > Touchpad > Tap is turned on. A strange thing in the control panel of the Touchpad is that [when loggend as a standard user] I get an error "unhandled exception has occurred in your application. If you click on continue the application will ignore this error and attempt to continue. If you click on exit the application will close immediately. "and a new line saying"index was outside the bounds of the array. If I click on continue the error disappears, but reappears if stationary "double-tap" enable/disable option. If I click on leave the Touchpad Control Panel closes...

  All this trouble occurs only when I use the standard account. With the administrator account, I don't get any errors so I soar options, disable them, activate them and most importantly, the tap to click works.

  What is the problem with the standard account?

  I have Windows 7 Home Premium 64-bit Service Pack 1.

  Can someone help me please?

  Hi Johnxf,

  ·         Did you do changes on the computer before the show?

  As he works in an administrator account, then probably your standard user account have been damaged and would need a fix.

  Follow the article provided below to fix the corrupted user profile:

   

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Let us know if that helps.

• Pushed back with Nvidia GeForce 9600GT 512 MB does not work?

  Hey...  I have a problem with regrowth in Adobe Photoshop CS5 Extended...

  The 'Regrowth' in 3D in Photoshop tab is greyed out...

  It's my system features:

  Windows Vista Edition Home Premium Service Pack 2

  2 GB RAM DDR2 at 667 MHZ

  Intel Core 2 Duo 2.4 GHZ OC to 3.0 GHZ

  NVIDIA GeForce 9600GT 512 MB OCed - latest driver updates

  Card mother MSI P6NGM

  ______

  

  This video card is supported in Photoshop CS5, but this tool does not work!

  Ways to solve this problem?

  Looks like we'll have to resort to cheating Photoshop using OpenGL drawing. Download these reg files *, open them in Notepad, change of 11.0 to 12.0 (because they have for CS4) and then run both with YOU on their behalf.

  http://www.Adobe.com/support/downloads/detail.jsp?ftpID=4056

• slow boot with an error message after + "entry" does not work

  My Firefox opens not instantaneously, but after awhile, it displays a message that one of the scripts have dropped with options to continue or stop the script. After the opening of the main window there is a message that Firefox is unable to open the toolbar. 'Enter' does not work in the address bar after this question.

  Screenshot of the message: http://i1176.photobucket.com/albums/x322/mveits/Firefox/Capture.jpg

  I'll add more information on request.

  It is also indicative of a problem with an add-on. Use the method in the link I posted above to identify what is causing the problem.

• lightbox / Accordion with vimeo video - full option screen does not work?

  Hi all, I put a vimeo video in a lightbox and on another page, I also put a vimeo withn an accordion, widget, but when the video plays, the option full screen on vimeo interface does not work.

  does anyone know of a fix for this?

  Thank you very much

  Hello

  It seems to work very well at my end. can you please try publishing your site again and check.  In addition, you try to use a few other videos just to confirm that the issue is not with the video.

  Kind regards

  Rohit Nair

• Edition with added script AS2 FLA file does not work

  I hired someone else to do the writing of scripts for animation I created originally. He calls an xml file that displays 3 different items in the flash. It works very well... except when I open the FLA and republish - even if I do not change a single thing, the SWF file does not work. I tried everything nothing helped. The writer use CS3. I use CS4, I tried with the CS3 version (on another computer). The writer and myself work on Mac. The writer has even sent screenshots of publication of windows, and I select all options of same exact. (version 9, AS2).  All the world run into this kind of problem? I'm at end of witt. I really need to be able to make changes to this file and publish it. I can post the FLA file, if someone wants to take a look.  TIA, Julie

  you are missing a greensock TweenMax class.

  I will try and attach a copy for you.  If it fails, you can go to: http://blog.greensock.com/tweenmaxas3/

  and dl the as2 version.  Place the gs folder in the same folder as banner.fla

• Change icons with Firefox 12.0 bookmark (Favicon does not work)

  I would like to change some of the icons in my bookmarks toolbar and some Add on Favicon Picker, but it does not work with Firefox 12.0 proposed. Is there something else I can do?

  Thank you

  Hello

  Thank you very much; your suggestion worked perfectly.

• X 230 with Ubuntu 13.10. Just does not work?

  Took delivery of my new X 230 yesterday. This machine came without OS and I installed Ubuntu 13.10 as the only operating system. Installation went well. This love machine. Some problems, however. The following does not work at the moment:

  1 F8 + F9 buttons to clear up the brightness of the screen

  2 Touchpad has no function. Might be off but where and how?

  3 Trackpad no function? Also be cut perhaps?

  4 non-operational fingerprint scanner? (not a big deal for me)

  Would appreciate any help in resolving these issues

  13.10 Ubuntu looks good and works well, but still a bit unstable.

  In this machine's plug. Processor Intel i5, 8 GB Ram, 500 GB HDD + 128 GB Samsung SSD eSata

  Hey

  check out this link once... maybe, it might help you

  http://AskUbuntu.com/questions/197336/how-to-enable-finger-printer-with-ThinkPad-x230

• My computer starts slowly, infected with the virus. Microsoft Security does not work

  Original title: keep the slow start
  How do I remove trozens in the computor & to I have no few of them didn't have on this computor Microsoft Security Essentrials keep turning off as his red everrytime I restart the computor

  Hello

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be harder to detect as
  the cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntiSpyware Portable Scanner - free
  http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ======================================

  If necessary AFTER you are sure that the machine is clean of any malware. (DO NOT USE IF)
  MALWARE IS STILL PRESENT).

  You can try a repair install or an upgrade in Place.

  You can use another DVD that aren't copy protected but you you need to own
  Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
  machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
  good backup or 3 (security in redundancy).

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  =======================================

  For extreme cases:

  Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
  This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
  uses aggressive methods to detect these threats, there is a risk that it can select some
  legitimate programs for removal. You should use this tool very carefully and only after
  you have exhausted other options.
  http://us.Norton.com/support/DIY/index.jsp

  ================================

  If you are in North America, you can call 866-727-2338 for virus and spyware help
  infections. See http://www.microsoft.com/protect/support/default.mspx for more details. For
  international information, see your subsidiary local Support site.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Impossible to move the mouse cursor using the trackpad on laptop Sony and some of its functions does not work.

  Former title: Sony trackpad not working no-Windows 8

  Hi guys,.

  I have a sony vaio s series that I bought last January. It comes preinstalled with windows 8, and I use it only about 2 - 3 times a week. 2 weeks ago my trackpad stopped working because I can't move my cursor. I can zoom in and zoom out, and other things, but there is a problem with some functions of the trackpad. I checked the synaptic driver and it says that it is up-to-date.
  now, I suspected that it might be a hardware problem, so I sent it to sony Service Center because it is still under warranty. Unfortunately, it is not the case and I was informed that it's a software problem. They advise me reinstall windows 8 because it is the only solution to the problem, they believe. (I want to clarify that it is probably not Fn + F1, as when I start the laptop, the trackpad works perfectly fine for about 30 secods and suddenly Soundtracks autour after that).
  I hesitate to do because it is a daunting task and I'm not really intuitive with such things. I wonder if you have any suggestions or if anyone has experienced the same problem.
  My hunch is that a windows update is responsible for this, but I'm not entirely sure. Indeed, 3 weeks after I bought my laptop, that this has already happened to my once but after the reboot, the trackpad has worked well. now even by restarting the computer does not help. Basically, I have to use a mouse which is not convenient when I'm on the road...
  Thank you very much! appreciate any help I can get, really. I'm about to want to sell my new laptop T_T

  I finally solved the problem. I reinstalled the driver in safe MODE. Hope it could be useful to someone else

• Search page based on query with Table on Layershift ADF Panel does not work correctly

  Hello

  I'm on 11.1.2.4 jdev and deployed my application on glassfish 3.1.2. I've hosted this application on Layershift externally.

  I created a search page based on query ADF with table Panel. All fields of research are working fine on weblogic Server integrated and my deployment local glassfish.

  However, on Layershift, when I enter some criteria of research in certain fields, it does not record.

  UPDATE, it seems that the problem is with the fields which are of the "String" ie. Name. Fields of data type Integer and Date seems fine.

  any ideas please?

  Thank you

  kdario, you're right, ViewCriteria does not use the correct syntax for mysql for the concatenation.

  The generated sql statement looks like this.

  SELECT * FROM (select student_id, student_name, from  student) QRSLT WHERE ( ( (UPPER(student_name) LIKE UPPER('%' || 'Per' || '%') ) ) )
  

  as DB MySql does not support | (double pipe sign), its sql causing failure.

  in order to support |, mysql requires to change the sql mode setting in the file my.cnf (on linux) in the

  # Set the SQL mode to strict
  sql-mode="PIPES_AS_CONCAT,STRICT_TRANS_TABLES,NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION"
  

  After setting this parameter, its working fine now.