Airport Extreme 7,7,7 drop connection and internet high speed

Similar Questions

• How to connect to Internet high speed Roadrunner

  connecrt to roadrunner highspeed internet

  Hello

  1. what exactly is the problem that you are facing on the computer?

  2. what operating system is installed on the computer?

  I suggest you refer to the link to Roadrunner support:

  http://help.RR.com/AA/rrwho.aspx?resetDiv=true&ReturnUrl=%2fHMSLogic%2fmain_contentwell.aspx

• Is it normal for my AirPort Extreme to run his fan on and off every 2 ' minutes throughout the day?

  I have a 2nd ae put in place to extend our network.  The second flashing yellow from time to time, always in the works, but the fan runs constantly II never heard our other use on the fan.  Never.

  If you ask about the current 'tour' in the form of version of AirPort Extreme, the fan runs constantly... (and normally very quietly)... as long as the AirPort Extreme has the power.

  This is the model you have?  If so, then the airport is defective. If the product is less than one year, or you have AppleCare implemented on one of your Macs... and... He airport most convenient is less than 3 years, Apple will replace the device for you.

  If your AirPort Extreme is not covered... and you are an it yourself type of person... you can open the AirPort Extreme and are looking for a replacement of the fan.  This article will give some tips on the opening of the product. Note that section provides the number of manufacturer and model of the fan, so you can use it to search for a replacement.

  AirPort Extreme A1521 teardown - iFixit

• WiFi unstable and slow Internet high speed

  Hello world:

  Recently, I am facing a problem of unstable wifi, slow speed of the internet of my macbook pro. I hope someone could help me with my problem.

  
  

  Symptom:

  Internet mainly speed just unstable using a wifi connection. (no problem with wifi connection self and my wifi suddenly grave would not be)

  Example:

  • FaceTime with my friends and the connection would suddenly abandon or images & audio gets fuzzy.
  • Videos in online streaming and suddenly occurs buffering.
  • Download file of software update iPhone via iTunes, the speed is slow, he needed to take 2 h at the end and later on a window display "cannot download and check your internet connection".
  • Suddenly cannot open websites like site apple.com, google.com. Sometimes it will take more time to open Web sites.

  Hardware and software:

  MacBook Pro mid-2009, OS X EL Capitan 10.11.5

  ISP: Cox, 50Mbps

  Modem & router: Netgear N450

  Test:

  Turn off my wifi and connect my macbook pro with modem & router with cable, internet high speed is stable and fast. Internet speed download speed test result display is of around 60Mbps, download speed is around 8Mbps. And I tried streaming using the connection cable, there was no buffering.

  I already tried the possible Solutions:

  • Restart the Macbook pro and restart Modem & router: will not work. I mean the internet will be very well at first, but later would be unstable again.
  • Reset Wireless Modem & router and change channels: useful, but not completely solve the problem. After you change the wireless channel, I tested my internet speed and the result showing 20-40Mbps (slower than 60mbps) speed download. Sometimes, the result will be like 6-8Mbps and sometimes it will be 60Mbps. If its unstable.
  • Wireless diagnosis: result indicates connection is good.
  • Called my ISP provider: they checked and said all right.

  
  

  Other Questions & details:

  • The internet is ok for most of the time. But when all of a sudden I can't open site or I can't download and streaming & FaceTime at normal speed, his frustration.
  • I thought it might be related to my hardware since its an old macbook pro. I can't run Apple hardware test because I don't have the installation disc more and my macbook pro is very old. Is it a third party software that can perform the test hardware on mac?
  • My wifi used to be very stable and I don't have to worry. Just for these last two weeks.

  
  

  
  

  I really appreciate your time and help! Looking forward to any reply!

  Wi - FI connection drops

  Connection Wi - Fi in OS X Yosemite problems

  Wi - Fi in OS X Yosemite connection problems (2)

  Connection Wi - Fi in OS X Yosemite problems (3)

  WiFi potential temporary fix - Yosemite

  Also try turning off Bluetooth.

  WIFI AND BLUETOOTH FINALLY SOLVED, NOT REALLY - YOSEMITE 10.10

  If your Wi - Fi source is capable of generating a 5 GHz Wi - Fi network, try that in order to avoid conflicts with Bluetooth.

• How will I know if my Airport Extreme has the latest firmware?  And (not related) how to change the password used to connect to my network?

  I think I bought the latest version of Airport Extreme.  It is the unit which is rectangular, is about 6 to 7 w., etc.  I have some basic questions that I do not understand:

  1. How will I know if I have the latest firmware for this device?  I read a few posts that make it sound as if it was just automatically updates.  Is this true?

  2. can someone tell me how to change the password used to connect to my wireless network?

  Thank you very much!

  Chris

  If a firmware update is available, AirPort Extreme flashes orange.

  The most up-to-date version of the firmware is 7.7.3.

  You can see what version you currently have the following on your Mac...

  Open Finder > Applications > utilities > AirPort Utility

  Click on the image of the AirPort Extreme

  Look for the Version

  If the new firmware was available, you will see a button update here

  To change the wireless network password...

  Click on edit in the window smaller than you watched just to check the firmware version

  Click on the Wireless tab at the top of the next window

  Go back / change the wireless password and enter a new password

  Do the same thing to check

  Click Update at the bottom right of the window and give the airport a minute full for restart

• Airport Extreme router's Express is connected by wire, East of 1 Gbps ports on switch it extreme on 100Bt now?

  Hi all

  In my house, the extreme is connected to a fiber modem 250 / 250 MB/s and I plugged a time Machine as an Express via CAT6 UTP. All serve as a router and provide 2.4 and 5 GHz wifi on the different floors of the House. Just a question: Express has 2 ports ethernet 100BT, Extreme and Time Machine have 3 1000BT Ethernet ports. The extreme switch mode back all 100BT because of the Express ports?  Because that would explain the downgrade in the port on the extreme speed after that the PS3 has been used connected to the Express.

  

  The extreme switch mode back all 100BT because of the Express ports?

  No.... but any device connected to the Terminal AirPort Express will have a maximum speed of 100 Mbps. So, if you connect a 1 000 compatible device to the Ethernet port on the Express, it would appear as a device of 100 Mbps on the network as the Express is limiting speeds.

  So, if you want a device that is capable of 1 000 Mbit/s to have 1 000 Mbit/s speed on your network, it will have to connect to AirPort Extreme or time Capsule.

• the Airport extreme, giving a slow wifi connection

  Hello

  I've got my download speed of 200 Mbps cable company. I checked a good signal by plugging directly in he back of the Modem (to remove the photo Airport extreme wifi.) ... I have 221Mbps actually...

  However, once I'm going to plug in the Airport Extreme and text my speed on wifi, I get only between 24 Mbps or max after several trials of 54 Mbps on download... I should get just under 200 Mbit/s because of the normal fall through wifi... However, not to the extreme I loss I get...

  Tuesday Apple Support has helped me to perform a reboot of the router and I have been good to get 198Mbps... It is here 2 days later and I'm back down to 24 Mbps...

  I tried to redo the reboot: unplug the unit, hold down the reset button, then while holding down the reset button, add power on and continue now stuck until it flashes yellow... But curiously, after it flashes it goes straight to the green... (never asking me to airport utility to add a password)

  My Wifi speed stink...

  What continues with this device... anyone have recommendations?

  I already proved the cable line and the modem (with the support of motorola)...

  Thank you

  Most likely you have a faulty AirPort Extreme. Please ask Apple to replace this unit for you.

  If you wish to renew a reset, follow the instructions very carefully:

  Turning off AirPort Extreme

  Wait 7 - 8 seconds

  Hold the first reset button... and hold in an additional 7 to 8 seconds while simultaneously you reconnect the power on the AirPort Extreme.

  Release the reset button to zero after the period of detention

  Allow a minute for the AirPort Extreme restart. The light will be Orange fixed for 15-20 seconds about, then turn to flashing orange slowly after about 30 seconds

  A slow amber flashing light... about once per second... confirms that the airport has been reset and you can set it up again.

• AirPort Extreme AirPort Extreme extension causes a loss of the internet

  I extend an existing AirPort Extreme of 5th generation (a year or so old) with a new one. When I connect a new one for the network and power, airport utility sees the two airports and asks me if I want to extend the existing one. I clicked on extend and every thing seems to be well - within the parameters, he said that the new airport will extend the existing wireless network. Unfortunately this seemed to cause my modem to lose its connection to the Internet. I have reset the modem a few times, but it wasn't until I disconnected and "forgot" to the new base station that I was able to retrieve internet. Previously, I had an airport model more old where I was trying to find a new one, but it had its own wireless network, which is kind of a pain. I would really like to have just a single network for both airports.  Is this possible or do I. To keep them separate?

  Thank you for any help or advice.

  If you spread by wireless, you can't have the extreme new plugged in by ethernet.

  If you do not want to extend wired you don't use wireless extension... you use create a wireless network with the same SSID (name Apple Wireless speaks) and the same password.

  Please give us more information.

  What is the brand and model of the main modem?

  Is this also a router? How the most extreme main airport is connected to the network?

  This mode is in there... router or gateway?

  Please take a few screenshots of the existing configuration using airport utility to show how the current airport is the installation program. We can then tell you the right way to connect the new airport.

  Just to be clear is the New Extreme a nine Gen6... or you want to say you have an another Gen5. The Gen6 is now more than 3 years on the market... No gen5 were therefore sold for 3 years.

  Are mix you models?

• Hang up during, connect and internet problems on laptop HP15-g019wm

  My portable computer product number HP15-g019wm F9H60UA #ABA has been suspended on the black welcome screen after logging about two minutes before opening on the desktop. My mozilla firefox is slow to open and does not connect to any websites other than the home page. It is upgraded to the latest version, when I first tried to open it and then it opens slowly. Google chrome opens quickly but then freezes when I try to go to another site. My computer is running windows 64 bit system 8.1. Anyone know what could be causing the issues off the phone and internet on my laptop? I was able to connect and browse the internet very well last night, and these problems just started to happen this afternoon. Any help would be appreciated.
  Thank you.
  Lynch10

  He seems to have been a problem during an update, as everything ran as usual on Sunday and continues to do so.
  Lynch10

• Portage Z30-A-13W connected to the high speed Port Replicator III - USB problems

  Hi all.

  We recently bought a new Portage Z30-A-13W and Hi-Speed Port Replicator III.
  Setting network and graphics work correctly with port replicator, but the USB ports don't work at all.

  I tried the port replicator USB 2.0 and USB 3.0 and I can't seem to work with a keyboard, mouse, USB key or a mobile phone.

  In the case of mobile phones, it is also no output power of the ports that the mobile does not start to load.

  At any one another experianced this problem and what was the resolution.

  Thank you very much

  Jonathan Davies

  Hello

  As far as I know additional drivers are not really needed to use the USB ports.
  This is why I m wondering why don t USB ports work.

  It might be possible that ports high speed Port Replicator III USB are faulty, but to be honest, I can't imagine that all 6 USB ports may bad work at the same time.

  So maybe it s a software problem.
  First of all, I would recommend the default BIOS and check the USB legacy support for keyboard and mouse could be activated.
  After access to the Device Manager and remove / delete the USB hubs and controllers in the list of devices.

  Keep high speed Port Replicator III connected to the computer and restart the device.
  Usually, the system should recognize automatically deleted USB ports and must update the drivers of USB ports.

  I hope that the USB ports don't work after this short workaround solution.
  Keep your fingers crossed.

• Slow, Internet high speed, if I connect to my desktop via router WRVS4400N PC

  I bought a Cisco WRVS4400N. Which is highly recommended by my friend IT. In my office, I have a local telecommunications fiber-optic connection, which is 100 Mbps download and upload 40Mbps.

  If I connect to the Internet taken directly into the computer, it flyes to 100 Mbps when I test on speedtest.net. When I connect to internet with the Cisco router and therefore farther from router on my desktop, it slows down to 25Mbps. I think there should be some sort of restriction inside the modem configuration. I don't know how to overcome it. Perhaps someone knows how to remove all the distracting security and other setings from inside my Cisco have the full flow of the internet.

  Thanks, Martin

  Martynas salvation. You can go to the Cisco Small Business Support Community to discuss the WRVS4400N as they now manage this device.

• Dropped connections and background processes

  I like the new ability to a background process, but I would like to know what background processes are underway and how long they have been broadcast.
  
  I recently had problems with connections dropped with our databases because of a recent. The problem is associated with the network not DB related exactly, but it would be nice not to have to manually disconnect and reconnect again. When we get the error - the connection has been lost or not connected, for me, it would be logical to be reconnect automatically or "Refresh" the connection via a button. I know it's a pending issue in sqldeveloper, but I can't believe it's so hard for developers to add this feature. It's happened to all that, take 30 minutes, coding for this problem? Thank you.

  To see what background processes are running you will need to use the progression of tasks pane (view > the task progress)-this will show in the progression of tasks as well as those who filled by mistake (I think it's he who filled watch tasks - it shows certainly tempted with errors of syntax of queries).

  On reconnecting, the current 2.1.1 version is a step back from recent versions facing better, trying to reconnect automatically upon detection of an interruption of the connection. I hope that, this reconnection will be corrected in the next release, but we will have to wait and see. As you suggest, an option menu to reconnect when the first disconnects and then reconnects likely shouldn't be too hard, but I guess that the development team thinks that the manual reconnection is quite low priority because it would only save two mouse clicks on four with the existing connection right click menu - especially if they are working on the automatic reconnection of fixation.

  theFurryOne

• WNDR3700v2 dropped connection and other issues

  So a few days so that I was playing a game on my desktop connected via the ethernet cable disconnected from the internet and I got a metered connection. I noticed that the green light blinking on the modem was green and not flashing and even with the router so I turned my computer off and unplug the modem and the router, and 10 minutes later tried to connect the modem and it is not at all connect up to 30 minutes later. Then today, while using the computer my modem was fine but the active router orange power light and the activity of solid turned orange flashing light but the others were green and after a few minutes limited connection it started working again.

  At the moment I went into the settings on the router and I got a weird message say im signed another device which is impossible because I only have access to the settings on this computer. I immediately changed my password router and wifi password. He had nothing in the logs at all. I have the latest firmware and have UPNP turns off and wide and remote router PIN is disabled. I know that my computer does not have a virus because I just got 5 months ago and I use it only for my mmorpg games and not surfing the web, I use my phone for this. Also I leave only 1 devices to connect to the router at a time to prevent the spread of a virus, if one of them has been infected. My computer and drivers are up-to-date and secure, and so is the router. I tried to replace the modem and the surge protector and that did not help. Strangely enough, it is just started recently and I did not move my modem or router for about a year, so I can't imagine his interference.

  Also, I used to get the attacks back almost one or twice daily random ip addresses so im not sure if, maybe, they broke into my router the or not, but I regularly use virus protection/firewall and scan with malwarebytes and I opened all the ports

  Maybe the router is running out.

  Try to reflash the firmware on the router, reset and reconfigure.

  When you reconfigure, replace all the settings to a different SSID wireless and use a wifi password stronger as well as the connection to the router password.

  Observe your connection.

• spinning cursor, stands, front, upgrade to El Capitan, upgrade to internet high speed and added SSDS but no change

  I just wheel spinning, lasted about 30 seconds.  Frequently, before and after the upgrade.  Add a SSD and increases internet speed from 10 to 25 - no visible change in the stalemate.  At the end of the present statement said that it has been updated about an hour ago.

  Download and run Etrecheck.  Copy and paste the results in your response. Etrecheck is a diagnostic tool that has been developed by one of the most respected users here (and recommended by Apple Support personnel) of the CSA to provide an overview of the system and help identify the most obvious culprits that can adversely affect the performance of a Mac.

  

• Need help to repair the internet connection; Airport extreme and microsoft xp pro

  I have the internet service of Rogers, a Dell laptop with microsoft xp professional and Apple airport extreme. I can't connect to the internet. I tried Apple, Rogers and Microsoft and no one can solve the problem. This has happened once before and Rogers has solved the problem by changing something on the WPA or WPA2 but I don't remember the details and they don't seem to help. We rebooted the router and my pc. I deleted and readded the connection; not good. Someone at - it ideas?

  Hi Julie,.

  1. do you receive an error message or error code?

  2 have you made changes on the computer before this problem?

  WPA authenticates users to ensure that only authorized people can access the network. There are two types of WPA authentication: WPA and WPA2. WPA is designed to work with all wireless network cards.

  This problem can occur because settings of Internet connection or drivers, try the following methods and check if it helps.

  Method 1:

  How to troubleshoot wireless network connections in Windows XP Service Pack 2: http://support.microsoft.com/kb/870702

  Method 2:

  This problem can occur if authentication enable IEEE 802. 1 X for this network checkbox is enabled. If this box is checked, but there is no server to authenticate the connection is interrupted. If you turn on the wireless network connection, it disconnects again after a short period.

  To disable authentication IEEE 802. 1 X, follow these steps:

  a. Click Start, type ncpa.cpl, and then press ENTER.

  b. right click on your wireless network connection, then click Properties.

  c. click the wireless networks tab.

  d. under preferred networks, click your wireless network, and then click Properties.

  e. click on the Authentication tab, click to clear the authentication enable IEEE 802. 1 X for this network check box and then click OK twice.

  Refer to the steps in the following Microsoft article.

  Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Keep us updated on the status of the issue.