AirPort Extreme AirPort Extreme extension causes a loss of the internet

I extend an existing AirPort Extreme of 5th generation (a year or so old) with a new one. When I connect a new one for the network and power, airport utility sees the two airports and asks me if I want to extend the existing one. I clicked on extend and every thing seems to be well - within the parameters, he said that the new airport will extend the existing wireless network. Unfortunately this seemed to cause my modem to lose its connection to the Internet. I have reset the modem a few times, but it wasn't until I disconnected and "forgot" to the new base station that I was able to retrieve internet. Previously, I had an airport model more old where I was trying to find a new one, but it had its own wireless network, which is kind of a pain. I would really like to have just a single network for both airports.  Is this possible or do I. To keep them separate?

Thank you for any help or advice.

If you spread by wireless, you can't have the extreme new plugged in by ethernet.

If you do not want to extend wired you don't use wireless extension... you use create a wireless network with the same SSID (name Apple Wireless speaks) and the same password.

Please give us more information.

What is the brand and model of the main modem?

Is this also a router? How the most extreme main airport is connected to the network?

This mode is in there... router or gateway?

Please take a few screenshots of the existing configuration using airport utility to show how the current airport is the installation program. We can then tell you the right way to connect the new airport.

Just to be clear is the New Extreme a nine Gen6... or you want to say you have an another Gen5. The Gen6 is now more than 3 years on the market... No gen5 were therefore sold for 3 years.

Are mix you models?

Tags: Wireless

Similar Questions

  • our airport time capsule connects to computers and the internet, but does not record on the usefulness of the airport as being there - is it dying or is their a reset?

    Our computers connect via wifi to a capsule of time to the airport and to the internet, but can't find the time capsule, nor can its hard drive. Y at - it a reset, we can try or he dies. It's only a couple of months.

    Turn about your Airport Extreme for 15 seconds and then power back on. As soon as you see the green light, you should be able to see him for a minute or two in the Airport utility. In the affirmative, and see if you have Back to My Mac active. If so, disable it by removing all the e-mail addresses of the back section of my Mac. Then update your Airport Extreme. Work quickly.

    Many have started having this problem within the last week, probably because Apple changed something in its servers CCMM. A real difficulty would come from Apple, but it should work if you currently have active CCMM.

  • Twitter account null causes error accounts on the Internet

    Today, I noticed a Twitter account with null values in my Internet accounts and when I try to select this account to remove, an error occurs and the Internet account is closed. How can I fix it?

    Console log error:

    03/03/16 00:30:28, com.apple.xpc.launchd [1 111]: (com.apple.preferences.internetaccounts.remoteservice [586]) Service was released due to the signal: invalid statement: 4

    03/03/16 00:30:28, com.apple.xpc.launchd [1 128]: (com.apple.ReportCrash [587]) endpoint has been activated through legacy launch (3) API. Please go to XPC or bootstrap_check_in(): com.apple.ReportCrash

    03/03/16 00:30:28, ReportCrash 542 [587]: report of incidents recorded for com.apple.preferences.internetaccounts.remoteservice [586] version 258 (258) to Users/luizfernandomiller/Library/Logs/DiagnosticReports/com.apple.preferences. internetaccounts.remoteservice_2016-03-03-003028_MacBook-Pro-de-Luiz-Miller.CRAs h

    Please, back up all data before proceeding.

    Triple-click anywhere in the line below on this page to select this option:

    ~/Library/Containers/com.apple.internetaccounts

    A right click or Ctrl-click on the line and select

    Services ▹ reveal in Finder (or just to reveal)

    of the contextual menu.*, a file must open with a selected item named "com.apple.internetaccounts". Move selected item to the trash. Test.

    If there is no change, repeat with this line:

    ~/Library/Preferences/com.apple.internetaccounts.plist

    * If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select

    Go ▹ go to the folder...

    from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  • Loss of the internet

    I keep losing my internet connectivity. I use a modem and router and they work.  Almost every other day I lose the connection. Reset of the router and the modem does not work. I have to restart.  My other computer with windows 7 is connected and works fine, just like my laptop. What is Vista?  My machine windows 7 runs fast 3 x on the same line as this.

    Go to the website of the manufacturer of your router > make sure you have the latest Firmware in Vista for it.

    Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

    Troubleshoot network adapter problems to Microsoft link above.

    Try without commitment TCP/IPv6:

    If you still have internet connection probs, one thing to try is the separation of the TCP/IPv6 (which is done by going to network connection > right click > properties > it uncheck > OK.)

    http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

    See you soon.

    Mick Murphy - Microsoft partner

  • Loss of random Internet

    I am running Vista Home Premium 64 - bit on a Dell Studio XPS which is one year old. He has never known issues related to the internet so far.

    I recently moved into a new apartment and got Comcast internet service via a modem, and since then, my computer had a very sporadic loss of the internet with applications on the internet. When I ping Google and other various sites, packet loss varies between 0% and 100%. The computer never indicates that something is wrong with the network connection, however, when I click on diagnose and repair, it sometimes suggests something is wrong with my modem, and sometimes suggests that something is wrong with my DNS.

    Nothing wrong with one of these or the material; I started my computer from a Linux live CD and the internet works fine. I also plugged my computer laptop (also under Linux) on the same ethernet cable and internet works fine. The cable is plugged directly into the modem; I do not have a router.

    I also tried to disable my Windows Firewall, disable Norton Internet Security, reset winsock and disabling autotune or anything...

    Any help with this is greatly appreciated.

    Solved by disabling "Advanced Networking Service" in respect of the services in the Task Manager. Something made of Dell, I guess he had a problem with the modem.

  • A network that extends with AirPort Extreme is causing Internet failure.

    A network that extends with AirPort Extreme is causing Internet failure.  When I unplug the extreme internet works fine.  What is the problem?  The extreme old used to be the main, but I reset when I bought the new Time Capsule.  Time Capsule is now the principal.  We had extensive network in the House for over a year with no problems until I put the Capsule in the mixture.  Why they arrive as well as the other?

    Is AirPort Extreme 'extension' of the network by wireless connection to the Capsule of time... or... AirPort Extreme connects to time Capsule using an Ethernet cable connection?

  • I just installed an airport extreme router and WiFi works, but the status light still flashes.

    I just installed an airport extreme router and WiFi works, but the status light still flashes.

    Open airport utility... Click EI... and see what the cause of the problem. It will give the list of questions on the summary page. Click on each of them and he will offer you even solutions.

    for example the firmware needs to be updated... nothing major... or DNS is wrong or double NAT...

    Without our crystal ball, we do not know what is the issue.

  • Airport Extreme 7,7,7 drop connection and internet high speed

    My Airport Extreme (6th generation) have had the serious problems of the internet, as said in the title I had problems with my internet connection, I checked if that was the problem of the modem to the beginning (D3.0 Ubee) which was provided by my Internet, Charter provider.

    I've had Airport Extreme for almost a year to 2 years now and since then, I had no problem with my internet until 7.7.7 update came.

    I updated my firmware and this is where my random internet connection problem started.

    My current contract with the Charter are their 60 Mbps (download speed) and 4 Mbps (download speed), during the first days since I've updated 7.7.7 connections was fine and then my internet has started to decline since a means 50-60 Mbps (download speed) to 0.1 - 2 mb/s (download speed), my download speed has remained a constant 3-4 MB/s (download speed). I have tried and used Opendns several times, he really did nothing.

    I tried to turn off both modem and Airport extreme for a couple of minutes and turn on their return, but he does nothing and just refers to an extremely slow speed.

    The only way I found to fix my problem to get my internet to 0.1 - 2 mb/s (download speed) back to its original state, I find myself to be a restore return settings on the Airport Extreme with my Airport utility by default whenever the problem returns (which contributes to a certain degree as it gets my back up to 50 internet-60 MB/s) then he drops down again).

    I wanted to restore to 7.7.6 or the latest version of previous firmware before 7.7.7 (not too sure what version of firmware, it was) but I can't find how to spend my Airport extreme to my Airport utility.

    My question is what could I do to fix this problem if the decommissioning of my extreme (I need instructions with this too), change some settings, get rid of the * thing and get a new router, or am I stuck resetting to the parameter by default whenever she acts upward.

    I use windows 10 for my laptop

    Thank you for your time

    Unfortunately, the first question that you encountered is the AirPort for Windows utility has not been updated since Windows 7. In addition, it is not supported for use with the 802.11ac latest versions of airport base stations. Then downgrade to earlier versions of the firmware for base station can be difficult, unless you can get hold of a Mac or iOS device.

    If you are ready to test Windows 10, here are the steps to do:

    • Open the AirPort for Windows utility.
    • Select the base and then station in the utility menu bar, select the access point > Download Firmware...
    • Click on the Download Version dialog box, where the current version of the firmware is listed.
    • You should now see a list of the firmware versions that are available.
    • Click on the one you want to get off at.
    • Choose either 'continue' to continue with the downgrade, OR click 'Cancel' If you decide not to do so.
    • If you choose to continue, allow the firmware to be downloaded, installed and the base station to turn.
  • Airport utility: green points on the AirPort Extreme & Internet; Mini Mac does not connect to the internet.

    Airport utility shows green points on the AirPort Extreme and the Internet, but my my Mac mini does not connect to the internet. IPhones and 2 portable Windows connect very well, and see all the devices on the home network. The problem occurred after that PSI has swapped an ancient for a Comtrend CT5072T DSL modem. I tried to stop and things start back up as if the installation of the internet for the first time. No joy.

    The airport connects using DHCP in Bridge Mode

    The router address is 192.168.80.1

    Address IPv4 is 192.168.80.2

    DNS server is the same as the router, but grayed out

    Mac Mini IPv4 Address is 192.168.80.3

    IPv6 automatically configures

    Also updated the firmware of the airport; no change.

    ISP guy was friendly but puzzled. He started at the top floor level Tech, so I do not know when I hear back.

    Any ideas to fix?

    Thank you.

    Post edited by: en maschera

    but my my Mac mini does not connect to the internet.

    The problem occurred after that PSI has swapped an ancient for a Comtrend CT5072T DSL modem.

    Hello

    Network preferences may be damaged.

    Open the Finder. In the Finder menu bar, click go > go to folder

    Type or copy paste the following text:

    / Library/Preferences/SystemConfiguration

    Click OK, and then move all files in the SystemConfiguration folder to the trash.

    Restart your Mac. See if that makes a difference.

    Your Mac will generate a new SystemConfiguration folder for you.

    Then open AirPort Utility located in HD > Applications > Utilitiies

    Make sure that both Internet and Extreme are green.

  • I have five Airport extreme with their network of people names different location home.  I have a brighthouse router that I use to connect to all the extremes of the airport.  I experienced the problem of connection to the internet.

    I have five airport extreme, with their network of people of names in a different location in the House.  I have a brighthouse router that I use to connect to all the extremes of the airport.  I experienced the problem of connection to the internet.

    Are all connected to the Brighthouse router by Ethernet extremes? Are all of the extremes configured as bridges?

  • My Airport Extreme is connected to a cable modem from Arris Surfboard, overtime, I try to set up it tells me that I am not connected to the Internet if I use a router TP - Link AC1750 can I connect is not my ISP. What I am doing wrong?

    I followed the instructions on how to set up my Airport Extreme, but he says that I am not connected to the internet.

    I can connect with a wireless router TP-Link is not a problem with my service provider. I want to connect with my Airport Extreme.

    What I am doing wrong?

    What exact model of the modem Arris do you have? Is your service provider Internet Cox, by chance?

  • Does not see the utility Airport Airport Extreme or any other device in the House on the network. However, all devices are getting internet.  Backups on external hard drive are going wireless, too. Yosemite day and other software. What should do?

    Said Airport utility cannot find extreme AP, which used to be on the network and shows no other devices on the network. But all devices (MBPro, MBAir, iMac, iPod touch, iPad 2 air2) are connected to the internet. Wireless backups on external drives are being completed. El Capitan 10.11.2; Airport Utility 6.3.6. How do "seen it all" again?

    What should do?

    All you can do is to try to circumvent some of the bugs crawl into El Capitan.

    Given that the AirPort Utility becomes easily confused about what are the devices on the network, it will sometimes help to perform a complete cycle of power on the network. If you want to try it...

    Power off all devices on the network, routers, computers, accessories, mobile devices, printers, etc... in any order you want

    Wait a minute

    Turn on the modem first and let it run by itself for 2-3 minutes

    Then, switch on the device connected to the modem and leaves turn a good minute

    Keep power devices one at a time about a minute out until the entire network is back

    Recheck the AirPort Utility

    If still no luck, we will have to try some repellent on Mac.

  • I have the network wireless with an extreme airport using my base station that dessert 4 Airport expresses. I want to replace the base station with a time capsule from apple.  Are there specific instructions other that connect the new time capsule

    I have a wired to the internet using my base station for 4 expresses the hard extreme airport.  I want to replace the base station with a time capsule.

    It is also easy to replace the existing base station and adding the name of the network and the password?

    You should be able to transfer your configuration of your current access point to new, and then you would just set up the internal drive, try to look at these articles:

    ith-new http://www.TechRepublic.com/article/apples-Airport-extreme-out-with-the-old-in-w.

    -one-airport-extreme-or-time-capsule-to-http://www.iclarified.com/31189/How-to-Transfer-Your-configuration-settings-fromanother

  • Need help to repair the internet connection; Airport extreme and microsoft xp pro

    I have the internet service of Rogers, a Dell laptop with microsoft xp professional and Apple airport extreme. I can't connect to the internet. I tried Apple, Rogers and Microsoft and no one can solve the problem. This has happened once before and Rogers has solved the problem by changing something on the WPA or WPA2 but I don't remember the details and they don't seem to help. We rebooted the router and my pc. I deleted and readded the connection; not good. Someone at - it ideas?

    Hi Julie,.

    1. do you receive an error message or error code?

    2 have you made changes on the computer before this problem?

    WPA authenticates users to ensure that only authorized people can access the network. There are two types of WPA authentication: WPA and WPA2. WPA is designed to work with all wireless network cards.

    This problem can occur because settings of Internet connection or drivers, try the following methods and check if it helps.

    Method 1:

    How to troubleshoot wireless network connections in Windows XP Service Pack 2: http://support.microsoft.com/kb/870702

    Method 2:

    This problem can occur if authentication enable IEEE 802. 1 X for this network checkbox is enabled. If this box is checked, but there is no server to authenticate the connection is interrupted. If you turn on the wireless network connection, it disconnects again after a short period.

    To disable authentication IEEE 802. 1 X, follow these steps:

    a. Click Start, type ncpa.cpl, and then press ENTER.

    b. right click on your wireless network connection, then click Properties.

    c. click the wireless networks tab.

    d. under preferred networks, click your wireless network, and then click Properties.

    e. click on the Authentication tab, click to clear the authentication enable IEEE 802. 1 X for this network check box and then click OK twice.

    Refer to the steps in the following Microsoft article.

    Wi - Fi and in Windows network connection issues:

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Keep us updated on the status of the issue.

  • Devices to connect to the airport, but not to the Internet

    Hi all; Here's my situation:

    I just bought a new Airport Extreme to replace my old router (Linksys). In our House, we have two iPhones 6, as well as the iPad, Apple TV and MacBook Pro that were all bought again this year. All these things were able to connect to the internet using our old wireless router.

    As I have configured and installed at the airport, various devices have been able to connect without being able to connect to the internet (i.e. AirPort Utility, the airport connection is a green dot, while the actual internet connection is an orange): first it was the MacBook having this problem while the phones and the iPad have been completely connected. After I simply rebooted everything several times - i.e. the modem, router, and MacBook - I finally got the MacBook fully connected (without really changing all the settings, which are all entered correctly). Now, however, it is the two iPhones that will connect the airport but not actually in the internet.

    Any ideas? I must say, these strange little problems idiopathic who seem to always pop up with Apple products are starting to really bother me... I never got my MacBook to connect to the Apple TV via AirPlay.

    Any time you change the material or providers of Internet services, networking, it's always a good idea to perform a complete recycling of your network equipment power. Check out the following Tip of an airport users for more details on how to do it. Please post back your results.

Maybe you are looking for

  • Satellite C850-A797 webcam does not work

    I have Toshiba Satellite C850-A797 and my webcam is not workingI think it is because of the update of Windows and * the new interruption of the software every time I download, *. It is the problem of toshiba server because I think that Help, please!

  • Skype constantly signing in and out

    Skype will keep signing me in and out randomly, when I try to reconnect immediately, it takes me to the connection and I must repeat 5 times before I get into Skype and when I'm in there all my contacts are offline, and when this happens, calls ive b

  • Motoactiv 8 GB headphones on a marathon

    Recently, I ran a marathon, first with my Motoactiv 8 GB and an official asked that the headphones are not encouraged. This is something Motorola needs to address as many of half and full marathons asking runners don't not to wear helmets. I have a G

  • HP Officejet Pro 8600: Control panel display

    Hi, the control panel (screen) of my printer is blurred, it is impossible to work or that you configure. I've been connected UBS cable and wireless. I used HP Scan doctor, but I have not found solutions. Thank you!

  • XP and IE

    That IE is no longer supported under XP, I'm not sure why someone would continue to use it? My browser of choice is Firefox. However, if you use Windows, also get you IE and as far as I know, it shouldn't be removed from your system. I suspect that I