Airport Extreme 802. 11 b / g compatible mode does not work

Similar Questions

• Dremweaver CS6. Design mode does not work.

  

  Hello.

  Design mode does not work.

  I got this instead of the normal display mode.

  What's wrong with it?

  Kind regards

  NATA

  Go to the main toolbar and choose View > happy head and turn it off.

• Private browsing mode does not work

  I've been without a pc for a while, now have a new with Windows 10. Just downloaded latest Firefox. I put it to always open in private browsing mode. But it does not work. When I close the browser, and then re - opening, my start page is not display the mask or indicate private browsing. I can get it in the usual way, just right-click on the icon that gives you options to open the new window or a private.
  I tried to turn on/off the navigation mode private the several times, still no luck.

  Probably, you won't see the purple mask of private browsing mode when you are in permanent PB mode because all windows are automatically in PB mode.
  You will see the mask when Firefox is started in normal mode and you open a new private window.

  You can use an extension for private browsing mode support tab.

  • Private tab: https://addons.mozilla.org/firefox/addon/private-tab/
  • Private browsing mode tabs get a dotted underline
  • You can enable or disable private browsing mode / disable via the context menu of a tab

• Qosmio X 875 - ECO mode does not work immediately after Win 8 upgrade

  I used the upgrade Toshiba Upgrade Wizard to Win 8. He succeeded well uninstall the incompatible software before the upgrade and install the new Toshiba and driver versions after the upgrade.

  I activated the ECO mode, and to my surprise, it does not work as before (in Windows 7):

  * Now, it works with the brightness to level 1 *... very dark. Before, ECO mode allowed me to go up to level 4 and was always considered in Eco mode...

  If I increase the brightness, the 'eco mode is disabled' message opens immediately.

  How to contact Toshiba to inform them of this problem and the other problem I found with the new BIOS?

  BTW, I am owner of a Qosmio X 875

  Post edited by: qosmitto

  > How to contact Toshiba to inform them of this problem and the other problem I found with the new BIOS?
  Contact your Toshiba authorized service provider in your country.

  Read this:
  + What is the TOSHIBA eco Utility? +
  http://APS2.toshiba-tro.de/KB0/FAQ2503AT0000R01.htm

  > It changes the brightness of the display of level 4, changes the brightness of the grey screen of level 1 (* 4),.
  _The * 4 means only on models with Windows7 installed _

  I guess that the previous configuration was only Win 7.

  8 win was made for mobile (use of the Tablet), the energy consumption of battery is also very important plant help to win 8. The consumption of the battery must be taken at the lowest level possible.
  So I guess that now help win 8 ECO medium mode and save the power max and long battery life time working at a max level.

• Windows vista Theme it's not uninstall and safe mode does not work

  I try to uninstall the windows vista theme, but it is not uninstalled. A black screen is coming, and it is disappearing. I also try to uninstall the theme of windows vista by creating my new account, but it is not uninstall same problem is coming. I also try to uninstall by opening my PC in safe mode. but my safe mode does not open

  I hope you answer me as soon as possible.

  Hello

  Follow the link

  http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall

• Opening of session in normal mode does not work, but will be safely mode__

  I can log into safe mode, but when I try to log in normal mode I get a message that says that the connection has failed and my stuff cannot be loaded correctly. I'm sure it's a software problem, but I don't know how to correct it. I'm working on a Windows vista computer.

  What is your problem error message?

  We need EXACT messages here.

  ·                        Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  See if the information in the above tutorial will help you.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  See you soon.

  Mick Murphy - Microsoft partner

• 802. 1 x authentication aid does not work

  According to the CEC documents, the following command should be a switch to do authentication for 802. 1 x for users. If this fails, the switch must fall back to no authentication. This prevents users to be locked to the network if the AAA/RADIUS server goes down.

  radius of group AAA dot1x default authentication no

  However, this command does not, at least not on the Catalyst IOS switches. If you disable the RADIUS server, the switch continues to try to use RADIUS regardless of the command above, even if the debugging indicates that the RADIUS server is dead.

  This directly conflicted with the following doc:

  http://www.Cisco.com/en/us/customer/products/hw/switches/ps646/products_command_reference_chapter09186a00801cdf12.html#1995856

  It is quite wrong that anyone who put implement 802. 1 x will be locked out of their network if the RADIUS server fails.

  Wireless access points do not have this problem because they can use a local RADIUS server. But it's a big problem for anyone with 802. 1 x running on cable networks.

  When Cisco will be be to fix this problem?

  Thank you.

  PAUL G.

  This does not work for 802.1 x and Catalyst switches.

  We will fix the documentation.

  In addition, Wireless APs don't have this problem with JUMP.

  Therefore, the challenge with Wired.

  Many EAP types, many types of back-end databases, etc. all need to review.

  We will have a configurable button in the near future to address, but as always, redundancy is recommended.

• permitted in offline mode does not work since Java-Version 1.6.0_29

  Hi, our Appl. JNLP includes < off line-enabled > but on windows systems, it does not work if Internet is disconnected.
  He tries to go online again - and fails, see below: some of the resources required are not cached.
  
  I notice that any of our <>resources are stored in the Java Console "Resourses"!
  Of course: temporary files are allowed (1000 Ko), that the application itself is stored in the program!
  
  Someone has an idea, what happens? Java Version_26 worked perfectly.
  Thank you
  
  
  <? XML version = "1.0" encoding = "UTF-8"? >
  < jnlp spec = '1.0 +' codebase = "http://www.tacticalsailing.de/swdl/" href = "Tactical_Sailing_de.jnlp" >
  < information >
  < title > Tactical_Sailing_de < / title >
  < vendor name > Copyright Paul Gerbecks www.TacticalSailing.de, Munich, Germany < / seller >
  < Host href = "http://www.TacticalSailing.de/" / >
  < description > Tactical_Sailing_Deutsch vom Server (v) < / description >
  < sort icon = 'default' href = "TacMarkFilled512.png" / >
  < sort icon = 'splash' href = "TacMarkFilled512.png" / >
  < offline permitted / >
  < shortcut online = "false" >
  < submenu of the menu = "Tactical_Sailing" / >
  < office / >
  < / shortcut >
  < / information >
  < resources >
  < j2se version = "+ 1.5" / >
  < extension name = "JavaFX Runtime" href = "http://dl.javafx.com/1.2/javafx-rt.jnlp" / >
  < jar href = "Tactical_Sailing.jar" version = "1.111.208" primary = "true" / > "
  < jar href = "TacSail_so_de_lib.jar" version="1.110.321"/ > "
  < jar href = "TacSail_back5_lib.jar" version="5.111.208"/ > "
  < name = "jnlp.versionEnabled property" value = "true" / > "
  < / resource >
  < class main application-desc = "com.sun.javafx.runtime.main.Main" >
  < argument > MainJavaFXScript = game. Home < / argument >
  < argument > = language GERMANY < / argument >
  < argument > signed = no < / argument >
  < / application-desc >
  < update check = "timeout" / >
  < / jnlp >
  
  com.sun.deploy.net.FailedDownloadException: resource konnte nicht werden loading: http://dl.javafx.com/javafx-rt-windows-i586__V1.2.3_b36.jar
  at com.sun.deploy.net.DownloadEngine.actionDownload (unknown Source)
  at com.sun.deploy.net.DownloadEngine.getCacheEntry (unknown Source)
  at com.sun.deploy.net.DownloadEngine.getCacheEntry (unknown Source)
  at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry (unknown Source)
  at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry (unknown Source)
  at com.sun.deploy.net.DownloadEngine.getResource (unknown Source)
  to com.sun.javaws.LaunchDownload$ DownloadTask.call (unknown Source)
  to java.util.concurrent.FutureTask$ Sync.innerRun (unknown Source)
  at java.util.concurrent.FutureTask.run (unknown Source)
  to java.util.concurrent.ThreadPoolExecutor$ Worker.runTask (unknown Source)
  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (unknown Source)
  at java.lang.Thread.run (unknown Source)
  java.net.UnknownHostException: dl.javafx.com
  at java.net.PlainSocketImpl.connect (unknown Source)
  at java.net.SocksSocketImpl.connect (unknown Source)
  at java.net.Socket.connect (unknown Source)
  at java.net.Socket.connect (unknown Source)
  at sun.net.NetworkClient.doConnect (unknown Source)
  at sun.net.www.http.HttpClient.openServer(Unknown_Source)
  at sun.net.www.http.HttpClient.openServer(Unknown_Source)
  to sun.net.www.http.HttpClient. < init >(Unknown Source)
  at sun.net.www.http.HttpClient.New(Unknown_Source)
  at sun.net.www.http.HttpClient.New(Unknown_Source)
  at sun.net.www.protocol.http.HttpURLConnection.getNewHttpClient(Unknown_Source)
  at sun.net.www.protocol.http.HttpURLConnection.plainConnect(Unknown_Source)
  at sun.net.www.protocol.http.HttpURLConnection.connect(Unknown_Source)
  at com.sun.deploy.net.BasicHttpRequest.doRequest (unknown Source)
  at com.sun.deploy.net.BasicHttpRequest.doRequest (unknown Source)
  at com.sun.deploy.net.BasicHttpRequest.doGetRequest (unknown Source)
  at com.sun.deploy.net.DownloadEngine.actionDownload (unknown Source)
  at com.sun.deploy.net.DownloadEngine.getCacheEntry (unknown Source)
  at com.sun.deploy.net.DownloadEngine.getCacheEntry (unknown Source)
  at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry (unknown Source)
  at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry (unknown Source)
  at com.sun.deploy.net.DownloadEngine.getResource (unknown Source)
  to com.sun.javaws.LaunchDownload$ DownloadTask.call (unknown Source)
  to java.util.concurrent.FutureTask$ Sync.innerRun (unknown Source)
  at java.util.concurrent.FutureTask.run (unknown Source)
  to java.util.concurrent.ThreadPoolExecutor$ Worker.runTask (unknown Source)
  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (unknown Source)
  at java.lang.Thread.run (unknown Source)
  
  Java Web Start 1.6.0_29
  Use der-Version of JRE 1.6.0_29 - b11 Java hotspot Client VM
  Home-Verzeichnis = C:\Users\Paul Benutzers
  ________________________________________
  c: Konsole löschen
  f: objects in Finalisierungswarteschlange finalisieren
  g: Speicherbereinigung
  h: sharp Hilfemeldung ads
  m: Speicherbelegung ads
  o: logging auslosen
  p: proxy configuration charge neu
  q: Konsole ausblenden
  r: responsible neu configuration guidelines
  s: System-und Bereitstellungseigenschaften ausgeben
  t: Threadliste ausgeben
  v: the ausgeben thread stack
  0-5: trace-Stufe auf < n > set
  ________________________________________
  Cannot launch the cache. Will try the online mode. [Some of the resources are not being cached.]
  # Java Web Start Error:
  # Resource konnte nicht werden loading: http://dl.javafx.com/javafx-rt-windows-i586__V1.2.3_b36.jar
  
  Published by: 901274 on 11.12.2011 00:58
  
  
  ---

  Hi Paul,.

  Unfortunately, I can confirm this problem too.
  That this regression has been already corrected in the version 1.6.0_01 report has been 6494357.
  Although the details of this bug may be different from what you get on screen the result is the same. The application works just not at all
  as soon as you are offline and when it uses the file extension jnlp.
  Once the access to internet is back, the application downloads again parts that still no change has been made.

  I fixed this problem by creating a unique jnlp without using any extension to this condition that works.

  It's not all...
  In windows XP, we can not use more the possibility to create our own progress bar, several new issues appear such as:
  The custom panel keep focus, which prevents the user to interact with all the windows open until the download is complete... (even the task managed to stop the current process)
  The values returned by the method of 'DownloadServiceListener' are bad or not properly refreshed. Sometimes the "read this far '" is heigher than the total ' to read '.
  When you have several Internet access, which means that Ethernet or wifi, you can not run a java web start application after spending between the two.
  You get two times a sign with an exclamation with nothing more. A little later, the Group deviation appears with more indication of a question on a connection delay.
  There is no other choice than restarting your computer.

  Claude

• Disable the setting of the play Mode does not work

  I have searched through the forum and with Google searches and saw he has discussed with several threads, but encountered no valid patches (or bypasses) so I thought I would try here...

  At work, I started in looking for a way to disable the 'read' for Adobe Reader X (version 10) Mode when the documents are displayed in a web browser, because a large number of users is complained about this.  I tried to disable (uncheck) the setting in the player 'Préférences', under the category of the Internet, but that has no effect on the way. PDF files are displayed.  I have tested this using multiple versions of multiple browsers (IE and FireFox) and ran on several versions of Windows (XP and 7).  However, even after unchecking the setting, the translucent toolbar still floating in the lower central part of the page.

  By clicking on the icon "Clover" ("see the toolbar Acrobat') to anchor the toolbar in a persistent horizontal row at the top of the window, which is what our users prefer, but having to do it manually with each document being read (which for some users, the number of hundreds per day) is extremely heavy.  In addition, unless I'm a bad interpretation of the description given by the Adobe documentation, that's exactly what the setting "Default playback Mode display" is supposed to control.

  Just for the record, here are other things that I looked at:

  • Confirmed that the [Adobe Acrobat or Acrobat Reader\10.0\AVGeneral HKEY_CURRENT_USER\Software\Adobe\] registry key, "bBrowserDisplayInReadMode", is actually used to 0 when the setting is disabled.
  • Tried to restart the browser, restart the computer and tried the test above under Windows XP and Windows 7.
  • Wanted by the release notes for each release / update of version X (10.1.1 10.1.2 10.1.3) to see if he had any information about it as a known bug, but found nothing.  Came across another post (http://forums.adobe.com/message/4087017#4087017) that claimed that the emitted are, indeed, a known bug that was supposed to be fixed in version 10.1.1.  However, my testing shows otherwise.
  • I have observed that even if the setting "Default playback Mode display" is not checked in the program settings (i.e. the start menu-> programs-> Adobe Reader, then clicking on 'Edit'-> 'Préférences'), if any. PDF file is then opened with a new browser session, not only is not docked toolbar, but if you right click and choose "Page Display Preferences", the parameter "Default playback Mode display" is checked.  Unchecking it, however, does not seem to have any effect.

  We appreciate any comments or suggestions.

  Again, I find answering me my own message / question.

  Apparently, this problem (parameter "Read Mode" has not influence) is a bug which is present in the version of Adobe Reader X 10.1.1 and after you have deployed the latest patch (quarterly), AcrobatUpd1013.msp, the problem has been resolved.  The parameter "Default playback Mode display" is managed correctly, so that the Reader toolbar is docked when the setting is off and returns to the floating, translucent toolbar / disappears when the option is checked.  It is more necessary to press the F8 key.

  Hope this info may help someone of another encounter the same problem.

• HP 27 1200 Omni: Game Mode does not work on Windows 10

  Hello

  I just installed Windows on my Omni 10.

  Unfortunately, the game (and TV) mode no longer works!

  In other words, when pushing the nutton game mode, the screen Windows and sound/app continues to operate and on the screen, while there is no mouse or keyboard or remote control possible entry!

  When you press the button mode of the game again, the system returns to windows 10.

  I would not go back to windows 8.1, so hopefully this is a known issue with the right solution!

  @Atripple

  HP has not all W10 drivers for this model.

  Read here.

  http://support.HP.com/us-en/product/HP-Omni-27-desktop-PC-series/5304895/model/5317996/document/c04763435/

  REO

• Satellite A200-1HV - sleep mode does not work

  Mobile coverage, close to the entrance in a sleep mode or a closing standby mode will be in condition is not clear: snap buttons it does not return to normal mode, toggle switch does not burn and portable starts is strongly heated.

  To force it to work, it is possible, only if to press power. But this work comes at the end not properly!
  As at the end of work with included food supplies specifications it is not turned off and reset product. Rearrangement Vista did not help.

  Please, say it's possible to do.

  I'm sorry for English.

  Hello

  sounds like a serious problem of material. I recommend that you send your machine to an authorized partner and leave check/repair your machine.

  Maybe some defective power supply on the motherboard.

  To find the authorized service partner nearest to your country please visit:

  http://EU.computers.Toshiba-Europe.com/

  go to support and downloads-> support home page-> of repairs maintenance &-> 'find an authorized service provider.

  Contact them and tell them the problem.

  Welcome them

• Windows XP hangs at the splash screen, safe mode does not work either

  I've updated my laptop with a windows update and when I went to restart, it crashes just in the start screen.  I tried in safe mode hanging at MUP. SYS and I tried the last known configuration.  So far these options do not work.  I tried Memtest, HDAT2, Ultimate Boot CD tests, chkdsk/p and chkdsk/r, Windows XP, CD recovery and rebuild, tried to start up with each opening of USB port and even tried formatting and installing Windows XP Pro SP2 and Windows XP Home Edition SP1.  So far I have always in step 1, where nothing has solved nothing.

  I noticed that there is a thread here where a person has had the same problem and he said that it has updated its BIOS.  For hours, now I did research on how update my BIOS by creating a bootable disc...  I'm thumbs on a mile it looks. Here is a link to the thread with the person who had the same problem. http://social.answers.Microsoft.com/forums/en-us/XPRepair/thread/2b3f344c-F923-4D84-868d-c0be603e601b

  I've been on the forums of Toms Hardware for more than a week with a little support, but so far, nothing has worked. http://www.TomsHardware.com/Forum/253683-45-wont-load-hangs-splash-screen#t916360

  I could use any help we can on it.  It would be deeply appreciated!  My email is * address email is removed from the privacy *.

  Well I tried to Win 7 on a bootable disc.  I followed a bunch of instructions I found on youtube.com, but for some reason that I could not burn to disc.  Kept getting an error even if I followed every perfect step.

  In any case, I watched my CMOS on compensation, but the battery is soldered on.  I just messed with it a little bit to see if it was lost or anything thing but I didn't rip out and one other solder on because I have never done this before.  So I put everything back together, turned on my laptop and it finally starts up the Windows installation screen.  FINALLY!  Thanks for everyone's help and patience.  I guess the battery has lost... but not quite sure.  I left the laptop off for about 4-5 days before I tried to play with the CMOS this morning.

  Daavee, thanks for your help on this.  I learned all troubleshooting and making the ISO.  Have a good Christmas!

• XP mode does not work in Windows 7 Professional

  I downloaded the program suitable for XP Mode in my upgrade to Windows 7 Professional

  but then the XP program does not appear in my menu start programs. I followed all the

  indications that it microsoft Web site. Any suggestions?

  My reason for the purchase of upgrade to Windows 7 Professional must have XP option

  Since I have an old set of Works Suite 2004 whioch has 2003 word in there that I preffer

  and I prefer XP on Vista and Windows 7.

  Mike Dunn, Paralegal Associates

  There are two programs, you must install:

  1 Windows6. 1 - KB958559 - x 64 or x 86 architecture that you run
  Restart the system, and then install:
  2 WindowsXPMode_en-we

  Both Windows XP Mode and Windows Virtual PC can be downloaded from http://www.windows.com/business/downloads.
  For more information about system requirements, please visit http://www.microsoft.com/virtual-pc

  In addition, click Start, type: enable or disable windows features

  Press enter on your keyboard

  Make sure that Windows Virtual PC is checked

  Click OK

  Reboot your system when prompted.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Minecraft PC version touch screen mode does not work does not correctly

  Hey, I just discovered that Minecraft pc version has a touch screen, I tried to use it, but I can't go anywhere, I can look from left to right, top down, but can't go forward or backward, can you guys tell me how to use it, or fix it?  or do something to make it better? my brother and I wanted to play multi player, he was going to use my PC while I used my tablet, but the touch screen mode was not very good, I couldn't use it, because I couldn't go anywhere. Please help me

  Hello Captain,

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  The touch screen feature works in other applications?

  Thank you for details on the question and your efforts to resolve.

  This problem may occur because of the corrupt app or settings and game files. Touch screen can not work properly due to corruption drivers installed.

  I suggest you to run convenience store app and check the issue.
  See this link:
  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  Please also updated drivers chipset of the site Web of the manufacturer of the computer and the check.
  Reference:
  Download and install the drivers
  http://Windows.Microsoft.com/en-us/Windows-8/all-drivers

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• blending mode does not work.

  I am unable to use the mix mode (screen) on my videos (shockwave) stock. He worked earlier but for some reason, he decided to stop working. He used to work with only the video layer stock alone, but now its not let me do blend with a single mode layer, now I have to use several layers for it to work. If I disable the other layer (not the stock of video) there is a black screen where the transparency is, as if it's a video of regular stock, same flood on the screen is activated. It's stupid because I just could, be able to have a layer and blend mode would continue to operate. Basically I can't use on a single layer blend modes as to make black become transparent. even if I could do a few minutes ago. Ive tried resetting preferences, Ive tried to restart the computer. With no luck. Someone help me please ():

  Here you can see that his game on the screen and the background is transparent but still black is not transparent.               Here, there is a red solid layer below the video of stock, which is on the screen. It works fine, but I don't want to have to add a solid layer, whenever I want something from the screen.

  

  You're wrong. The screen mode creates no transparency, it does that add some pixel values with a luminance value more high than black. Screen does not generate transparencies, never, never will.

  You can use Knoll Unmult to ensure transparency of the black areas in an image. It's easier work.