Loss of random Internet

Similar Questions

• Apple TV 4th gen falls randomly internet connection

  I have an apple's generation 4 tv and it randomly falls out of internet connection. I have to restart my router on average once a week to fix. It's really frustrating. My MacBook and iPhone has no problem. When internet decreases, macbook and iPhone work fine. Only, the apple TV is messed up. Its wireless connection through a router belkin thru time warner cable (internet satans). Anyone know of any solution or someone who has this problem?

  in other words, it happens on average once a week...

• AirPort Extreme AirPort Extreme extension causes a loss of the internet

  I extend an existing AirPort Extreme of 5th generation (a year or so old) with a new one. When I connect a new one for the network and power, airport utility sees the two airports and asks me if I want to extend the existing one. I clicked on extend and every thing seems to be well - within the parameters, he said that the new airport will extend the existing wireless network. Unfortunately this seemed to cause my modem to lose its connection to the Internet. I have reset the modem a few times, but it wasn't until I disconnected and "forgot" to the new base station that I was able to retrieve internet. Previously, I had an airport model more old where I was trying to find a new one, but it had its own wireless network, which is kind of a pain. I would really like to have just a single network for both airports.  Is this possible or do I. To keep them separate?

  Thank you for any help or advice.

  If you spread by wireless, you can't have the extreme new plugged in by ethernet.

  If you do not want to extend wired you don't use wireless extension... you use create a wireless network with the same SSID (name Apple Wireless speaks) and the same password.

  Please give us more information.

  What is the brand and model of the main modem?

  Is this also a router? How the most extreme main airport is connected to the network?

  This mode is in there... router or gateway?

  Please take a few screenshots of the existing configuration using airport utility to show how the current airport is the installation program. We can then tell you the right way to connect the new airport.

  Just to be clear is the New Extreme a nine Gen6... or you want to say you have an another Gen5. The Gen6 is now more than 3 years on the market... No gen5 were therefore sold for 3 years.

  Are mix you models?

• Loss of the internet

  I keep losing my internet connectivity. I use a modem and router and they work.  Almost every other day I lose the connection. Reset of the router and the modem does not work. I have to restart.  My other computer with windows 7 is connected and works fine, just like my laptop. What is Vista?  My machine windows 7 runs fast 3 x on the same line as this.

  Go to the website of the manufacturer of your router > make sure you have the latest Firmware in Vista for it.

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  Troubleshoot network adapter problems to Microsoft link above.

  Try without commitment TCP/IPv6:

  If you still have internet connection probs, one thing to try is the separation of the TCP/IPv6 (which is done by going to network connection > right click > properties > it uncheck > OK.)

  http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

  See you soon.

  Mick Murphy - Microsoft partner

• Connect a HP OfficeJet Pro 8500 to router Netgear N600 loss of internet connection.

  Whenever the OfficeJet printer is connected to one of the ethernet to a Netgear N600 router ports, the internet connection is lost. Internet works without any complications, if the printer is not connected to the network. As soon as the ethernet cable from the printer is connected to the router (or a network switch) the internet connection is lost. If I look at the devices using the Netgear browser interface, everything seems appropriate. The printer uses DHCP and you will receive various IP addresses according to what remains is connected (e.g. 192.168.1.3). I've narrowed the problem to the printer, causing the loss of connectivity internet thie. Attach only my computer to the router (may be an iMac or a Windows XP system), internet works fine, plug the printer results in a loss of interest. Printer works fine and the documents can be printed after you connect to one of the ethernet ports.

  I tried to set a static IP address on the printer (e.g. 192.168.1.100) so that the attribution of a static address with the interface of Netgear using the MAC address of the printer - no approach fixes the problem. Netgear support is perplexed (they have even sent a replacement router, thinking it was defectiive, the two routers show the same problem). I have reset the printer to its default settings in order to eliminate potential conflicts with modified parameters. I also tried to change the speed of the link to something else than "Automatic", nothing seems to work.

  We will define an external static IP and DNS address for the printer.  I think that the external DNS will do the trick.

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  Your router have updated firmware?

• Airport Extreme 7,7,7 drop connection and internet high speed

  My Airport Extreme (6th generation) have had the serious problems of the internet, as said in the title I had problems with my internet connection, I checked if that was the problem of the modem to the beginning (D3.0 Ubee) which was provided by my Internet, Charter provider.

  I've had Airport Extreme for almost a year to 2 years now and since then, I had no problem with my internet until 7.7.7 update came.

  I updated my firmware and this is where my random internet connection problem started.

  My current contract with the Charter are their 60 Mbps (download speed) and 4 Mbps (download speed), during the first days since I've updated 7.7.7 connections was fine and then my internet has started to decline since a means 50-60 Mbps (download speed) to 0.1 - 2 mb/s (download speed), my download speed has remained a constant 3-4 MB/s (download speed). I have tried and used Opendns several times, he really did nothing.

  I tried to turn off both modem and Airport extreme for a couple of minutes and turn on their return, but he does nothing and just refers to an extremely slow speed.

  The only way I found to fix my problem to get my internet to 0.1 - 2 mb/s (download speed) back to its original state, I find myself to be a restore return settings on the Airport Extreme with my Airport utility by default whenever the problem returns (which contributes to a certain degree as it gets my back up to 50 internet-60 MB/s) then he drops down again).

  I wanted to restore to 7.7.6 or the latest version of previous firmware before 7.7.7 (not too sure what version of firmware, it was) but I can't find how to spend my Airport extreme to my Airport utility.

  My question is what could I do to fix this problem if the decommissioning of my extreme (I need instructions with this too), change some settings, get rid of the * thing and get a new router, or am I stuck resetting to the parameter by default whenever she acts upward.

  I use windows 10 for my laptop

  Thank you for your time

  Unfortunately, the first question that you encountered is the AirPort for Windows utility has not been updated since Windows 7. In addition, it is not supported for use with the 802.11ac latest versions of airport base stations. Then downgrade to earlier versions of the firmware for base station can be difficult, unless you can get hold of a Mac or iOS device.

  If you are ready to test Windows 10, here are the steps to do:

  • Open the AirPort for Windows utility.
  • Select the base and then station in the utility menu bar, select the access point > Download Firmware...
  • Click on the Download Version dialog box, where the current version of the firmware is listed.
  • You should now see a list of the firmware versions that are available.
  • Click on the one you want to get off at.
  • Choose either 'continue' to continue with the downgrade, OR click 'Cancel' If you decide not to do so.
  • If you choose to continue, allow the firmware to be downloaded, installed and the base station to turn.

• Satellite L875D - 106 internet continues to lose connection

  Hi all

  I recently got a Toshiba-brand new laptop, but I have problems with the internet. It connects fine, but he will often lose the connection, and then reconnect again. It usually falls just for a few seconds and when I'm just browsing, and if it's not really that much of an issue, but I also play on this computer, and it's a real problem for me because I keep late because of the loss of the internet and/or abandonment.

  I have a suspicion that this is due to a freezing of the computer gets sometimes, which is very noticeable while watching a movie or listening to music. It freezes for about 1 second and then continues on his business after that.

  When I'm at home I use a cable to get internet i live in a student House, so that we don't have to speak right to have wireless, but it's also goes to school where there is wireless connections. I have not had any problems with the internet connection when using my previous laptop, and my boyfriend (we share the apartment) has a fixed + laptop which work fine with the same switch for internet.

  Really hope you can help me!

  Thank you DBOBA for sharing your experience here in the community.

  You're right: change the WLan PCI power settings in Windows Advanced Power Options can help avoid these annoying wifi disconnections.

• Firefox starts in offline mode work and does not connect to internet

  Firefox disconnects randomly internet. Work off line option is checked then when somehow naked - Firefox still does not connect. A re-start the computer him more often, solved the problem. What is new and I did not any changes recently. Running Fox 3.6.3

  Try going to Tools - Addons - Extensions and disable your extensions one by one to see if one of them is at the origin of the problem.

• Error: unable to contact IP driver, code 2 error unable to connect to the internet.

  Original title: failed to contact the driver of the intellectual property, the error code 2.

  Using XP Pro SP3 with MSE, I got, perhaps, AV Protection 2011 virus. After cleaning, I couldn't connect to internet... Internet access icon showed I was connected, but I was unable to connect to any site. On startup, I got the error that spampal is unable to use port 110 and this that I solved it by uninstalling Spampal. As a result, I now get 'unable to contact driver ip, code 2 error '. Device Manager will not display any errors.

  I did reset winsock.

  IPCONFIG/all reports ~ an internal error: the request is not supported.
  Contact the Services de Support technique Microsoft for assistance.
  Additional information: host name of request impossible.

  Are there instructions to resolve intellectual property issues or should I do a system recovery?

  I thought that MicroSoft offers no support virus of cost recovery. Which would include management of this problem?

  Follow-up... I found some good suggestions that I'll try to Jack MVP and Molly Mae found at the related link ~ thank you

  Loss of the internet wireless connection, do not seem to have an ip address now, need help!

  Error code 2 is BACK to talk about 'file not found '.

  If you see this:

  Windows IP configuration

  An internal error has occurred: the request is not supported.
   
  Contact the Services de Support technique Microsoft for assistance.

  Additional information: host name of request impossible.

  Take a look in the folder c:\windows\system32\drivers for this file (assuming that XP is installed on your C drive):

  Tcpip.sys

  If the file is missing, you must replace it.

  We know that XP likes to keep the backup copies of critical system files in this folder:

  c:\Windows\System32\dllcache

  Look there for a backup copy of the file tcpip.sys and paste in the c:\windows\system32\drivers folder where it belongs.

  If you do not see a copy in the dllcache folder, search for a copy here:

  c:\windows\ServicePackFiles\i386

  If you do not see here, you can download it from my SkyDrive and network disks exceeds the system afflicted on a USB or floppy drive.

  I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

  c:\Windows\System32
  c:\Windows\System32\dllcache (this is where XP keeps backups of important files).

  Here is the link to my SkyDrive and you can get the file you need here:

  http://CID-6a7e789cab1d6f39.SkyDrive.live.com/redir.aspx?RESID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you can not see the file extension (.exe, .dll, .cpl, .sys, .zip, etc.), but when download you them they will have the right extension.

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, your browser is unable to save the file with an extension (by example, .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called tcpip when the name of the file should really be called tcpip.sys (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

  You then put the downloaded files in the correct folders on your system.

• Windows XP is very slow and auto update works but when I try to run internet explore the system times out. »

  Original title: Windows XP runs very slow

  Windows XP is very slow and auto update works, but when I try to run internet explore the system times out.

  Hi Bill,

  Thanks for posting your question in the Microsoft Community.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. What is the error message that is accurate or complete?
  2. have you made any recent hardware or exchange of software on your computer before the show?

  Please follow the links below and check the issue:

  Maintenance tasks that improve performance:
  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/maintenance-improve-performance

  Slow PC? Optimize your computer for optimal performance:
  http://www.Microsoft.com/athome/Setup/optimize.aspx#fBid=R7qdKIMaJyT

  Warning of Chkdsk.
  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.
  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Internet Explorer is slow? 5 things to try:
  http://Windows.Microsoft.com/en-us/Windows/help/Internet-Explorer/slow-five-tips-to-boost-performance

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Your response is very important for us to ensure a proper resolution. Please get back to us to help you accordingly.

• I lost the internet connection after acceptance of your latest updates. How can I cancel the updates?

  I lost the internet connection after acceptance of your latest updates. How can I cancel the updates?

  Debbie

  How do you know that the loss of your internet connection has nothing to do with the Windows updates? You must find the reason for the loss of the connection.

  How do you connect? Is a wired or wireless with a modem or a router? If a router is the router shared with another computer and this computer can connect to the internet? You need to determine if the problem is a fault on your computer or a failure to connect to your internet access provider?

  What error messages are reported?

  Event Viewer reports

  1. normally, when an error occurs on your computer looking in Event Viewer should be your starting point to find a solution. More related system errors are recorded and get an exact copy of the relevant report is important. Unfortunately, is not easy to understand reports and most of the users computer need help with their interpretation. I have to say later interpretation.

  2 Event Viewer includes three main newspapers of Windows. Here's the Application, security, and system. For purposes of troubleshooting system is by far the most important.

  3. to access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs. Place the cursor on the system, right click and select filter current log. Check the front of the error and click OK and see you only reports errors. Click the Date and time column header to sort. You may need to click a second time to see the last report above.

  4. a tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. Select the Details tab and check the box in front of the XML view. Click the copy button to place a copy in the Clipboard and close Event Viewer. Now start your message and paste it into the body of the message. Make sure that it is the first dough right out of the event viewer.

  5. He cautioned against three types of reports, information, and reports errors. In most situations, it is the error reports that offer the best information but sometimes WARNING reports provide useful clues.

  6. all reports have stamps date and hour and when troubleshooting, it is important to focus on the latest reports. Reports of studies from the point when the computer is started, and then check if a similar report appeared in the previous session. If errors do not repeat investigation as to why they happen is wasted effort.

  7. in the individual reports the most important information is the event ID and Source such as these help when looking for help on the internet. The description is just as important and copy the exact text to use as search criteria greatly helps achieve better results when using Google. Not paraphrase descriptions when other people asking for help.

• Internet slowdown on a PC after reinstalling windows 7

  Thus, as part of my COMPUTER classes, I had to show I could maintain a computer. Then I took mine apart and put back together, checked it worked then wiped the HARD drive and reinstalled windows 7 ultimate 64 bit version. It is up and running now, but the speeds I get from my internet connection is incredibly slow.

  My main PC (that I'm having issues with) got up to 2 MB download speed until I reinstalled. Now, I have gone on speedtest.net and discovered that a ping takes 1074ms, I have a download speed of 0.66 Mbps and upload of 0.19. My laptop on the other hand, (both using the same network without wire in the same room on the same desktop) 30ms ping, D/L 14.97 and 0.81 upload speed. I tested it several times, making sure that the two ping the same destination, but the results are always the same.

  I reinstalled the driver wireless twice, I reinstalled the LAN connector twice and I have reset the BT homehub twice again the speed didn't get closer than two days ago. I spent many hours fishing trawl a few forums looking for advice, but I can't find any solution that helped. I tried a wired connection, I used invites them to drop and to renew the INVESTIGATION period. The only thing I noticed which seems strange to me is that neither of my a IPV6 connections.

  Can someone help with this problem?

  Hi, Will,

  Welcome to the Microsoft Community Forum.

  I suggest you check out article below and check.

  Why is my Internet connection so slow?

  http://Windows.Microsoft.com/en-CA/Windows/why-Internet-connection-slow#why-Internet-connection-slow=Windows-7

  Important notes:

  Antivirus: Data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  Internet Explorer: The Reset Internet Explorer Settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings. Reset Internet Explorer is not reversible, and all the previous settings are lost after reset.

  When you disable the Antivirus: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attack.

  Let us know the result. We will be happy to help you further.

  Thank you

• I lose the internet connection on during approximately 10 seconds every 10 minutes

  I use a Sony Viao and wireless broad band, I don't know there is something wrong with the Internet because the signal on my other devices remains coherent and connected at any time, it's just this computer which seems to be losing it. its really frustrating that I use the PC to watch TV, the connection always seems to be lost in the really exciting parts! If anyone has any ideas as to why this maybe I'd appreciate your comments.

  Thank you

  Hello Allison,.

  Thanks for posting your question in the Microsoft community.

  I understand that the computer loses random Internet connection. I am here to help you and I suggest these methods to solve the problem.

  Method 1:

  Check out the link and follow the steps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Check out the link and follow the steps.

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Method 3:

  Reset the TCP/IP and check. Check out the link and follow the steps.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  For any help about Windows, you can still post on the Microsoft Community Forum.

• Time Capsule visitor files a network (associated with possible network connectivity)

  I have one Capsule of 3 TB I bought in early 2015.  I had a very frustrating problem from the beginning with her down my network, apparently at random.  I tried a lot of different things, and nothing worked, so I post to see if anyone else can help.

  The TC is plugged directly into my UVerse router/gateway via ethernet and I put the TC to have a static IP address.  The Uverse router firewall has a rule for the TC and TC shows how a router cascade in the rou UVerse.  I have wireless 2.4 GHz and 5 GHz when put in place on the TC.  I have a Mac Mini connected directly to it via ethernet, but it's a recent thing (maybe I was hoping that it would help).  I have also a PC attached to it for internet access only windows.  I have two Macs backup via Time Machine, well I tried to disable backups on one to see if that has had an effect (it didn't).  In fact, I have a whole list of notes on things I tried in the last two months, since I started to really tackle this problem seriously.  In particular, I've tried steps 1 to 5 in this link: Time Capsule constantly default to be recognized by Airport utility if I have not tried a factory reset.  I'm running the latest versions of OS X and iOS.

  The basic model is that I have the TC set up and work.  The wireless works fine.  Time Machine will back to it fine.  I can see the TC in the Finder.  I can open the AirPort on a Mac and iOS utility and it is 'green '.  All right.  Then, at a random time in the next few days (the longest one since I started to take notes is 7 days), the TC will drop from the network.  The without wire will be there and still works fine, but Time Machine will not be able to find it for backups, it will not be displayed in the Finder.  AirPort (iOS or Mac) utility shows a yellow triangle with an exclamation point and says that the device is no longer part of my network.  I have to unplug the TC and plug it back again so that he can return to the top.  As soon as I did that, everything will return to normal and be fine for a few days, and then he disappeared again.

  Tonight, however, I connected to another event.  I was watching something on my AppleTV when he started the buffering.  I grabbed my iPhone to see if my internet has declined.  More or less on a whim, I checked the airport utility and noticed that the TC showed a green dot but 'Internet' showed an orange dot.  A minute or two later, the AppleTV started playing video again, so I checked again airport utility and this 'Internet' time, has a green dot and the TC showed the usual brand yellow triangle / exclamation indicating it was abandoned.  I noted the time and then went back to look at what I had looked at.  About two hours later, I went to the power of the TC cycle and understand what to try next.

  The AppleTV is not connected to the CT.  It connects to the UVerse bridge (it is connected to the ethernet on the back of one of the set-top boxes UVerse).  This means that the loss of the internet was for everything in the House, not only the TC.  Something about the process seems to have caused the TC to drop from the network somehow, but everything remains recovered him very well.  Looking the UVerse bridge, it seems rebooting once since then (about an hour and a half after the TC dropped) but not by anyone in the House (I don't know if perhaps AT & T pushed something in the modem or if it is defective).

  So, no idea why loss of connectivity would cause the TC had to give up in the network?  Of course, it also appears, I may have a problem with the gateway Uverse, but if the TC goes down when everything is ok, it suggests a problem here as well.

  Since you seem to have picked up some things from my post...

  We will continue the process... This is where life becomes difficult. It is not uncommon to what you feel.

  Just to get the full picture.

  The TC is plugged directly into my UVerse router/gateway via ethernet and I put the TC to have a static IP address.

  I would prefer you to the TC using the bridge... using standard DHCP... (you can leave the Uverse for him apply a DHCP reservation).

  Once you do that... move the cable that connects the TC to the WAN Uverse on TC to the LAN port... It is fine in bridge...

  If it always falls I have a more serious way to do. It is much more complicated, however, because apple has removed all controls on sensitive router. But I think you will find that the WAN port is dubious on the TC. It can appear at different times and with different modems/routers...

  Alternatively, you can take the TC to Apple and have them replaced... It took me three goes to get a decent one. And I'm not even sure that the fault will not be displayed again in the near future out of warranty.

  But it could appear perfectly when Apple test it... and the replacement can be just as bad... in other words it is a deeper problem that Apple realize.

  Another thing tricky, I discovered.

  Airport routers stick to the local domain... even packed... they do not Pick-up area of the main router.

  This means that some devices will lose the connection because they are on the wrong field. It is possible to change the field on the Uverse make local as well... Since apple has not all the controls of the airport. I did some time ago on my main router and I can hardly give you direct evidence that helps... as many adjustments it is one of the many small things that are in addition to the lack of reliability that can help if you get the other 20 on the right. I think it helped...!

  From there on, we need to work a little more on maybe the ethernet connection... or the LAN port 100 Mbps gigabit Uverse? I think I'd rather see you adjust the speed of 100Mbps as long as your internet speed is less than that of course for gigabit.

  Give me some screenshots of the configuration... It is also useful.

• Satellite Pro A40: Cannot read music - looking for an audio controller

  Hello

  I have a satellite pro A40, my DVD rom drive no longer works and I get a message on the search for material for a multimedia audio controller!

  Cannot play music or anything more.

  Can I download these drivers safely?
  Don't want cluttering up computer with random internet downloads.

  If anyone can help me I would be eternally grateful

  Hi satproa40,

  You can download all the drivers for your satellite safely of: [http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]

  the "multimedia audio controller" means that the audio driver,
  If already installed it can help remove this item in Device Manager and let it reinstall System.

  same procedure with the dvd - rom, if this wont work try swapping the drive...